Used Dil 0M for sale (24,825)

Condition: used, This listing is for the Handilaz Mini Particle Counter complete with case and manual (Others available without case - see listings) The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Codpfx Ajxhga Djddeaa Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Codpsv Npx Nofx Addsaa Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: new, Year of construction: 2025, Laser source: 3kW Raycus Laser head: Raytools autofocus Control system: FSCUT 5000 A Loading of tubes up to 6400 mm long, unloading up to 4000 mm Positioning accuracy: ±0.05/1000 mm Acceleration: 1 m/s² Speed: 120 rpm Max. Positioning speed: 100 m/min Max. Max. weight of a pipe: 250 kg Caodei Arwlspfx Addoa Pipe diameter: 15-230 mm Total machine size: 12728 × 3400 × 2450 mm

Condition: used, F01041301040108050201, PHFS-C1-OIS, DILAS, laser module, f=100, WD=93mm Model: F01041301040108050201 Type: PHFS-C1-OIS Condition: Used Cjdpjvrh Aljfx Addjaa

Condition: new, Year of construction: 2025, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. LNM-355 is a flexible, compact and very efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Five pneumatic nail guns with magazines for jumbo coils equipped with nail indicators. Possible to produce legs with 2-5 blocks/leg. Possible to nail 1-9 nail in each nail pattern. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Manual or automatic adjustment for block positions. Big buffer for finished legs. Csdsw R Sl Sepfx Addsaa The machine can be equipped with an optimized block cutter, automatic block feeding, automatic board feeding and automatic leg stacking. Material dimensions for a standard machine: - Boards: Length 500-3500mm, Width 60-150mm, Height 16-32mm - Blocks: Length 60-150mm, Width 60-150mm, Height 50-125mm Capacity: - 35 blocks/min Machine dimensions: - Length 3800mm, Width 5200mm, Height 2000mm The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos.

Condition: used, functionality: fully functional, power: 11 kW (14.96 HP), gearing type: other, fuel type: electric, color: grey, empty load weight: 700 kg, Year of construction: 2019, operating hours: 345 h, power of feed motor: 5,500 W, Screed Pump POLITERM® 1000 H2O – Year 2019 – 40% Cheaper than New POLITERM® MACHINE 1000 H2O – Screed Pump (Year 2019) For sale is a used POLITERM® MACHINE 1000 H2O from EDILTECO. This machine was manufactured in 2019, is made from stainless steel, and is specifically designed for mixing and pumping lightweight screeds with Politerm Blu as well as other lightweight aggregates (e.g., polystyrene, perlite, vermiculite, cork). ✅ Robust, reliable, ready for immediate use ✅ Automatic water dosing for densities from 100–800 kg/m³ ✅ Significant cost savings compared to new (EUR 32,323 as of 08/2023) Technical Specifications • Mixing tank: 1000 liters • Motor: 3.0 kW – 400 V – 50 Hz • Mixing spiral: Double crossed motion • Pump motor: 5.5 kW – 400 V – 50 Hz • Pump capacity: 500 liters of water/minute • Max. delivery height: 30 m • Weight: approx. 700 kg • Dimensions: 210 × 130 cm, loading height 100 cm Csdpfew N Nzzjx Addsaa Equipment • Digital water dosing • Shackles for lifting slings & forklift pockets Optional extras available on request • 3x screed delivery hoses • 1x discharge stand Price & Savings 💡 New price (08/2023): EUR 32,323 ➡️ Now available as a used machine with up to 40% price advantage (savings of approx. EUR 12,900). 👉 Price: EUR 19,394 (net) 📍 Location: AT-3902 Vitis

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Codsxhf Tijpfx Addsaa Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW Csdpsvu Saysfx Addsaa 10. bottom - 22kW 11. bottom - 22kW

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Codpsvwg Tmofx Addoaa

Condition: used, COMPACT 50/400, DILAS, diode laser system (air-cooled), System D Model: COMPACT 50/400 Codpfjr D Rdtjx Addsaa Condition: Used

Condition: used, Year of construction: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with tap changer 19 steps, switching group YNyn0, with expander, Buchholz relay, dehumidifier, fan, dial thermometer, year of manufacture 1978 Casdpfet Akl Hox Addja

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions Codpfx Adswfynfjdoaa • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: as good as new (ex-display), Year of construction: 2015, Ultrasonic Cleaning System It is designed for 10m long heat exchanger with 1.5m diameter and weight of 30 tons. Together with internal mounted rollers and quick chemistry heating system, it is perfect for cooperation with demanding clients. Applications for the use of ultrasonic units - Industrial cleaning - High-pressure cleaning - Petro-chemical activities - Shut-down cleaning activities - Other cleaning where Year of production: end of 2015 Total working hours: 135 for diesel generator, about 40 for ultrasonic transducers Caedeuigpmjpfx Addja From the beginning It was stored in warehouse in perfect conditions All other technical information and price can be sent upon request. This technology is highly recommended for cleaning heat exchangers but also for small parts which high pressure methods can damage. It reduces the periods of shutdowns while cleaning, saves water and sewage.

Condition: new, Year of construction: 2024, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. CBF Block Feeder is a flexible, compact and efficient block feeder for pallet production. User-friendly program. The machine lifts one row of blocks at a time from a stack of blocks. The machine also removes paper / cardboard automatically if it appears in the stack. The machine is controlled from a 10" touch screen. Beckhoff control system. The machine's travel length can be changed according to the customers needs to retrieve blocks from several packages/stacks. Capacity: - Approx 5 work cycles / min Cajdeh Dpxdjpfx Addsa Machine dimensions: - Length 2000-6000mm, Width 2500mm, Height 2900mm The machines is CE-marked. The machine can be equipped with a belt conveyor and much more. For more information, pictures or videos take contact.

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Cooling water connection: 2" Refrigerant: R407C Refrigerant charge: 24 kg Installed electrical power: 29 kW Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Caodpjw Dppvefx Addea Height: 3650 mm Weight: 5600 kg

Condition: used, overall weight: 575 kg, volume flow: 550 m³/h, power: 75 kW (101.97 HP), We offer for sale Grundfos pump Type TP 200-510/4 A-F-A-DBUE. Csdswqnfvepfx Addeaa The pump is used, in very good condition.

Condition: excellent (used), Belt conveyor 4,30m with drive Codpfjhvmlksx Addoaa Length: 430cm width: 70cm Height: 90cm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. DNM1600 is a flexible, compact and efficient pneumatic nailing machine for manufacturing deck for pallet industry. User-friendly program, which means that the changeover takes place very quickly and the machine can save settings for over 100 different decks. Bostitch nail guns that are equipped with nail magazines for jumbo coils with indicators. Opportunities for manufacturing asymmetrical decks. Equipped with flexible cassettes for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Dimensions for standard machine: - Deck board: Length 600-1600mm, Width 75-125mm, Height 16-28mm - Stringer: Length 600-1500mm, Width 50-125mm, Height 16-28mm - Deck/Stringer pallet size: Length 600-1600mm, Width 600-1500mm 2-way pallet kit available as an extra option that makes it possible to produce stringer pallets/2-way pallets with a max. stringer height of 100mm. Capacity: - 3 Deck/min (With 5 deck boards) Machine dimensions: - Length 5000mm, Width 2500mm, Height 1900mm The machines is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking. Caodpoh Dpwcofx Addoa For more information, pictures or videos take contact.

Year of construction: 2003, condition: excellent (used), 1 piece radial blower Manufacturer: Turbowerke Meissen Howden Model: LRN 0800 W 100/11 GR360 Volume flow: 56000 m³/h Pressure increase: 2000 Pascal at 20°C Caodpekn H Izjfx Addja Rotational speed: 1000 rpm Shaft power: 37 kW Weight: 1850 kg Year of construction: 2003 Dimensions: Width: 2400 mm Length: 1530 mm Height: 2040 mm Diameter suction side: 800 mm Shaft height without spring buffer foot: 1250 mm dimension pressure side: 700 x 700 mm including 360 ° rotatable suction side and transition including compensator for pressure side. No damage or wear. Frequency converter optional also possible.

Condition: new, Year of construction: 2024, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. DNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing deck or stringer pallets (2-way pallets). Motorized conversion for stringer channels. User-friendly program, which means that the changeover takes place very quickly and the machine can save settings for over 100 different decks and pallets. Bostitch nail guns that are equipped with nail magazines for jumbo coils with indicators. Opportunities for manufacturing asymmetrical decks/stringer pallets. Equipped with flexible cassettes for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Codoh Dpv Hopfx Addsaa Dimensions for standard machine: - Deck board: Length 600-3500mm, Width 75-125mm, Height 16-50mm - Stringer: Length 600-1500mm, Width 50-125mm, Height 16-100mm - Deck/Stringer pallet size: Length 600-3500mm, Width 600-1500mm Capacity: - 3 Deck/min (With 5 deck boards) Machine dimensions: - Length 5000mm, Width 4400mm, Height 1900mm The machines is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking. For more information, pictures or videos take contact.

Year of construction: 2007, condition: excellent (used), 1 piece Radial blower with pre-shaft and cooling disc for warm and also dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Volume flow: 71060 m³/h Pressure rise: 1673 Pascal at 250°C (0,637 kg/m³) Rotational speed: 1460 rpm Shaft power: 40,5 kW Weight: kg Caodekvpfhopfx Addoa Year of construction: 2007 Insulation with rock wool and galvanized sheet. Dimensions: Length: 3250 mm width: 2400 mm Height: 2000 mm Diameter suction side: 750 / 980 mm Shaft height without spring buffer foot: Dimension pressure side: 980 x 780 mm including compensator for pressure side. No damage or wear. Only the color inside is off due to the heat.

Condition: new, Year of construction: 2024, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes LNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Three Bostitch nail guns with magazines for jumbo coils equipped with indicators. Possible to produce legs with 2-30 blocks/leg. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. The machine can be equipped with an optimized block cutter, as well as automatic block feeding into the nailing machine. The block cutter can be mounted on the back side of the nailing machine or on the side. Dimensions for standard machine: - Boards: Length 600-3500mm, Width 60-125mm, Height 16-28mm Cajdpsi Hkqmefx Addoa - Blocks: Length 60-150mm, Width 60-125mm, Height 50-100mm Capacity: - 21 blocks/min Machine dimensions (without block cutter): - Length 9000mm, Width 1000mm, Height 1900mm The machines is CE-marked. The leg nailing machine can also be equipped with automatic stacker for finished legs. Do not hesitate to contact us for more information, pictures and videos.

Year of construction: 1995, condition: good (used), Radial blower from Venti Oelde with intake silencer. Caedpfjd Nqlcsx Addsa !! Characteristic as picture attached!! Volume flow: 46308 m3/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Engine: VEM 415 S4 Power: 110 kW

Year of construction: 1987, condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of construction: 1987 Pump speed of 1480 rpm is also possible! Caedpfx Adeh S Nz Ssdea Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Year of construction: 1989, condition: good (used), Good condition, with connection for sealing water. Caedpfx Asc Iu Uijddsa Head : 86 meter / 8,6 bar Flow rate : 600 m³/h Rotation speed: 1450 rpm Drive line: 190 Kw Can also be used as a turbine!