Used Diode for sale (161)

Laser Diode Controller Modul DCC3

Call

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Cc2x9xq Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

more

Listing

Dresden

6,531 km

Diode laser for welding

TRUMPF TruDiode 4006

Call

Condition: excellent (used), Year of construction: 2016, The TRUDIODE 4006 from TRUMPF is a Laser with Power 80 to 4000 W, Wavelength 920, 1040 nm, Output Power (CW) 80 to 4000 W, Operating Temperature 10 to 50 Degree Configuration Laser Head with Control Unit (Integrated) Type: Laser System Operation Mode: CW Laser Application: Welding, Selective Soldering Power: 80 to 4000 W Wavelength: 920, 1040 nm Laser Color: Infrared Output Power (CW): 80 to 4000 W Bfutzj9kepy Gain Medium Type: Solid State Laser Application Industry: Automotive / Industrial & Manufacturing Beam Divergence : 50 mrad

more

Listing

Burgdorf

6,798 km

high power diode laser

Laserline LDF 4000-30

Call

Condition: excellent (used), Year of construction: 2010, Laserline LDF 4000-30 * MFD 2010 * laser power: 4 kW * wavelengths: 940 + 980 + 1030 + 1060 nm * beam quality: 30 mm mrad * 1 fiber connector for LLK-D, 600 µm or more, NA 0.1 * hours of operation: 5.387 h Laser on, 32.767 h control on * integrated optics chiller * extended dust protection (external purge air) Bhhck3ikco * Interbus LWL interface (can be changed to other field bus types as well)

more

Listing

Hamburg

6,807 km

Screen fiber diodes

Screen fiber diode 500mW

Call

Condition: new, Year of construction: 2023, original Screen laser diodes 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM (64 channel) M2jfr new & second-hand

more

Buy-it-Now

Germany

6,875 km

TRUMPF 1564904

€2,361

Call

Condition: used, machine/vehicle number: 1564904, Guarantee in months: 12 Manufacturer: Trumpf Iwixeov Product condition: Used from old Stock Traces of use: Slight traces of use Item No.: 1564904

3 x SVS Ventilstecker BF BI 11 mm LED+Z-Diode

Listing

Willich

7,034 km

Screen fiber diode

SCREEN PT-R 8600

Call

Condition: used, original Screen fiber diode for PT-R8600 & OEM (64 channel) Yuw3a0

more

Listing

Burgdorf

(dealership location)

6,799 km

high power diode laser

Laserline LDF 4000-100

Call

Condition: excellent (used), Year of construction: 2011, Laserline LDF 4000-100 * MFD 2011 * laser power: 4 kW Bc0uzus3uu * wavelengths: 980 + 1030 nm * beam quality: 100 mm mrad * min. fiber diameter: 1000 µm * fiber connector: LLK-D * hours of operation: 12.132 h * extended dust protection (external purge air) * Interbus LWL interface (can be changed to other field bus types as well)

more

Buy-it-Now

Germany

6,875 km

Murrelektronik 7000-29821-0000000

€51

Call

Condition: new, machine/vehicle number: 7000-29821-0000000, Guarantee in months: 12 Voltage: 24 V AC/DC 7ppycnd0 Product condition: New from old Stock Traces of use: none Packaging: Original packaging Current: 4 A Temperature: -20 - 60°C Poles / Cores: 3-pole Manufacturer: Murrelektronik Item No.: 7000-29821-00000

Hand laser welder 1500 watt

Listing

Burgdorf

(dealership location)

6,799 km

high power diode laser

Laserline LDM 1200-60

Call

Condition: used, Year of construction: 2009, * max. laser power 1200 W cw * wavelength: 910 nm +- 10 nm Cbbp9tcy * power supply: 400 V AC, 47 - 63 Hz, 3 phase * max. power consumption: 3.6 kW * water cooled (required cooling capacity 2.4 kW, approx. 11 l/min) * incl. fiber optic cable LLK-B, 600 µm core diameter, 5 m long

more

Listing

Münster

6,955 km

Metal detector

Radiodetection RD 7000+ DL

Call

Condition: excellent (used), Metal detector make: Radiodetection, type: RD 7000+ DL, in box, as good as new Scqpceh9y

more

Listing

Heidenheim an der Brenz

6,764 km

Diodela FWS-1500-AS

Call

Condition: as good as new (ex-display), Year of construction: 2022, Machines are in stock and ready for demonstration purposes. Gladly also on Saturdays! We offer a laser welding machine for manual operation. This technology is very new and often lacks expertise, infrastructure and after-sales service in the sale of these machines. However, these are exactly our strengths and this is what we put a lot of emphasis on. Decades of experience in the welding trade are the perfect basis for us to advise you perfectly. We do not only deliver a machine but support you by demonstrations, feasibility tests, parameter optimization ... Everything that makes a competent partner. Technical data: ===== Laser source: fiber laser Output power: 1500 Watt Power range: 10 - 100% Wavelength: 1080nm Output operation: continuous / modulated modulation frequency: up to 50kHz Cj99i9owdu adjustable axial run-out: 0.1 - 5mm central focus distance: standard 120mm (150mm optional) cooling: integrated water cooling heating time: 1 minute working humidity:

more

Listing

Fanuc A04B-0811-D401 LD Unit Diodenlaser SN: P95P00037

Remscheid

(dealership location)

6,986 km

Fanuc component

Fanuc A04B-0811-D401 LD Unit Diodenlaser SN: P95P00037

€398

Laser Diodes for SCREEN, FUJI, AGFA CTP

Call

Condition: ready for operation (used), Fanuc A04B-0811-D401 LD Unit diode laser SN: P95P00037,used, good condition, 100% functional, scope of supply according to photos 2jrc2fv

more

Listing

Hamburg

6,807 km

Screen laser diodes

Call

Condition: new, Year of construction: 2023, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >250 mA U1150073-10 Refurbished Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, (new diode inside, used housing) U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, ᐳ2013 Ccud07xc 100212447V01 New Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand 100212447V01 New Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new

more

Buy-it-Now

Germany

6,875 km

Diodengatter DGE-22M

Lütze 710810

€57

Call

Condition: used, machine/vehicle number: 710810, Product condition: Used from old Stock Voltage: 250 V Guarantee in months: 12 Manufacturer: Lütze Ezwsntd Traces of use: Slight Current: 1 A Item No.: 710810

Gleichrichtersäule mit Einpressdioden

Buy-it-Now

Germany

6,875 km

Siemens C 66117-A5206-A114

€68

Call

Condition: used, machine/vehicle number: C 66117-A5206-A114, Product condition: Used from old stock Traces of use: Slight traces of use Guarantee in months: 12 Manufacturer: Siemens Ispo7hm Packaging: Original packaging Item No.: C 66117-A5206-A114

Diodenbaustein MKS-10/LDP 1000-95M

Buy-it-Now

Germany

6,875 km

Murrelektronik 67097

€81

Call

Condition: new, machine/vehicle number: 67097, Product condition: New from old stock Guarantee in months: 12 Manufacturer: Murr Elektronik 3u22tqxh0m Packaging: Originally sealed Item No.: 67097

2 x Näherungsschalter mit Leuchtdiode

Buy-it-Now

Germany

6,875 km

Siemens 10418

€53

Call

Condition: new, machine/vehicle number: 10418, Connection: 3-core cable, 2,5 m long Fq8clpb Packaging: Original packaging, opened for photography Manufacturer: Siemens Guarantee in months: 12 Scope of delivery: with operating instructions Product condition: New from old Stock Current: max. 1 A Power: 24 W Voltage: max. 24 V Traces of use: none Item No.: 10418

Näherungsschalter mit Leuchtdiode

Buy-it-Now

Germany

6,875 km

Siemens 11881

€54

Call

Condition: new, machine/vehicle number: 11881, Product condition: New from old Stock Power: 40 W Manufacturer: Siemens Ehgatsut Scope of delivery: with operating instructions Current: 2 A Packaging: Original packaging, opened for photography Traces of use: none Voltage: 12 - 27 V AC/DC Guarantee in months: 12 Item No.: 11881

Listing

Radom

6,026 km

folding machine

Uchida F-43N

Call

Condition: good (used), Uchida F-43N automatic folding machine Made in Japan. Perfect condition, machine ready to work. This is a very well-equipped model – automatically adjustable cassettes, automatic detection of paper sizes, automatic feeder. Technical data: paper size: min: 91×128 mm max: 297×420 mm A6-A3 basis weight: 45-160g (max. up to 230g when folded in half) 230V power supply weight: 34kg Detailed data: – automatic setting of the folding place for the six most popular columns (in half, in four, „Z”, „C”, „altar” – automatic recognition of paper sizes for six formats (A3, B4, A4, B5, A5, B6) ability to set the paper folding speed from 3,300 to 10,000 sheets per hour shelf for folded documents Bigmrluity7 automatic paper feeding system smooth paper flow thanks to the paper conveyor belt counter of folds performed, packet countdown, total, etc. automatic stop signaled by sound when all pages are folded paper jam is signaled by an appropriate sound and the diode lights up

more

Listing

Strassberg

(dealership location)

6,847 km

Amada FO M2 3015 - 4 kW + ASLUL

Call

Condition: used, Year of construction: 2016, Working hours laser on: 42445 h Working hours beam on: 23823 h Laser power: 4000 (max. 5000) Watt Working range laser: 3070 x 1550 x 200 mm Max. steel: 25 mm Max. stainless steel: 15 mm Bm0rowhcbk Max. aluminium: 10 mm Length: ca. 13000 mm Width: ca. 3000 mm Height: ca. 2220 mm Machine weight: 12000 kg Electrical connected load: 72 kVA Standard configuration Automatic pallet changer with cutting edge support High pressure cutting device (CleanCut) Aluminum cutter Automatic gas pressure control Non-contact capacitive HS laser cutting head extraction cooling unit Diode laser for positioning Projection path flushing Assistant Gas Filter Active cutting monitoring Extended machine accessories Automation ASLUL

more

Listing

Lübeck

6,765 km

Laser Welding Robotic system

TRUMPF TruLaser 3030 (L20)

Call

laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, working range: 3,000 mm, total length: 9,300 cm, total height: 2,200 cm, total width: 4,600 cm, workpiece weight (max.): 900 kg, sheet thickness steel (max.): 25 mm, overall weight: 12,000 kg, Condition: reconditioned (used), Year of construction: 2009, Operating hours: 26,080 h, The machine is currently being overhauled at our plant in Lübeck and will soon be available for inspection under production conditions. Special equipment: + 3200 on Laser TruFlow 5000 Standard equipment: - Closed machine frame with integrated laser unit, - Motion unit for high-precision machining, - Torque drive in combination with linear direct drives, - Closed beam guidance, - Single cutting head strategy, - cooling unit, - Automatic pallet changer in longitudinal direction, - Wide longitudinal conveyor, - 17" touch color screen, - Work area lighting, - Position laser diode, - Spraying device, - PierceLine, - FocusLine, - NitroLine, - PlasmaLine Cutting head - LensLine with condition check, - Lens cutting head with 250mm focal length, - Universal cutting head quick-change device (UTI), - ControlLine: height control and sheet outer edge detection, Control system - Simple / Advanced shop floor programming, - Fast post-production - Integrated technology data, - Automatic shutdown, - ContourLine, - FastLine, - FlyLine - Microweld, - production plan - AdjustLine, - Teleservice, Data transmission - USB interface, - RJ-45 network connection Safety - CE marking, - light barriers, - multi-chamber dust extraction system, Igeypntsa - compact dedusting system Keller Vario T1.5, - machine cladding with Makrolon panes

more

Listing

Ringaudai

5,951 km

YASKAWA/ MOTOMAN / LASERLINE LDM 1200-60 / HP20D

€65,000

Call

Condition: like new (used), Year of construction: 2019, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Machine can be inspected. Very good condition. Connected, can be tested. B92etse0y7

more

Listing

Nidzica

6,122 km

laser cutter

TRUMPF Trumatic 3020

€12,000

Wire-based Directed Energy Deposition

Call

laser power: 3,200 W, type of input current: three-phase, Condition: good (used), Year of construction: 2004, Operating hours: 78,402 h, machine/vehicle number: A0225 A0048, Functionality: fully functional, TRUMPF Trumatic 3020 Laser Cutting Machine Year of production 2004 Sinumerik 840D control system Laser type TLF 3200 Laser power 3200 Working area X axis - 3000 mm Y axis - 1500 mm Z axis - 115 mm Max. weight of processed sheet - 710 kg Max. sheet thickness structural steel - 20 mm Max. thickness of stainless steel sheet - 12 mm Max. thickness of aluminum sheet - 8 mm Positioning speed - 60 m/min Simultaneous speed - 85m/min Laser on/off: 78402 h, beam on/off: 31993 h Equipment: Cutting head with 5" lens Cutting head with 7.5" lens Manually extendable working pallet HI-LAS - high pressure cutting PMS Plasma emergence monitoring system Sheet position recognition system Laser positioning diode Programmable selection of cutting gases with infinite pressure adjustment DIAS head distance adjustment Sprint-Las ContourLas AutoLas Plus Oil washer Working chamber illumination Sectional extraction system Filtration system Tele service RJ 45 3,5''- floppy disk station User manual ToPs 100 programming Dm7cwj Machine in working order, in constant use.

more

Listing

Ano Thoriko

5,582 km

MELTIO M450

€1,30,000

Call

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: M4502000050, Dimensions (WxDxH): 560x600x1400 mm Print Envelope (WxDxH): 145x168x390 mm Weight: 250 kg Laser Type: 6 x 200 W direct diode lasers Laser Wavelength: 976 nm Dmtpbt Total Laser Power: 1200W Power Input: 208/230 V single phase or 400 V three phase Power Consumption: 2-5 kW peak depending on selected options Process Control: Closed-loop, laser and wire modulation Enclosure: Laser-safe, sealed, controlled atmosphere Interface: USB, ethernet, wireless datalink Cooling: Active water-cooled chiller included Wire Materials: Compatible with a wide range of welding wires including stainless steels, mild steels, carbon steels, titanium alloys, inconel and tool steel. Wire Feedstock: Diameter: 0.8-1.2 mm Spool Type: BS300 The machine was delivered from Meltio Spain in September 2022 in Refurbished condition and has only been used for printing the calibration cube. It has been equiped with new laser fibers with thermistors which check the temperature of the laser fibers and protect from overheating especially in long print jobs and up to date chamber door/safety glass. Hot wire option offers increased print speed with a programmable power supply that preheats the material before it enters the melt pool. The Dual Wire option allows for the fast and automatic switching of materials within a print without cross-contamination. Simplify3D licence (V4.1.2) is included.

more

Listing

236 Shobra, Asad, El Sahel, Cairo Governorate 4351126, Egypt

4,880 km

imagesetter

SCREEN CTP Screen PT-R 4300

Call

Condition: excellent (used), Year of construction: 2005, CTP Screen PT-R 4300 Built in 2005 maximum plate size of 830 x 660 mm (32.6" x 25.9"), and are also capable of supporting some of the smaller 2-page presses with a minimum plate size of 324 x 370 mm (12.8" x 14.6")*. SAL Autoloader, Bacher punch for SM 52 SM 74 On-line processor, kodak 32 diodes to expose thermal metal plates approx. 100.000 plates exposed, up to 21 plates/h Rampage-RIP v.13.xx incl. PC-workstation Bgokgrbbvgl conveyor and plate stacker There is a video that can be sent by WhatsApp Important : The machine has been imported from Europe (Germany ) and still in our warehouse. So never used here

more

Listing

Trumpf TruLaser 3030 - 6kW (L20) + LiftMaster Linear + Tr

Strassberg

(dealership location)

6,847 km

Trumpf TruLaser 3030 - 6kW (L20) + LiftMaster Linear + Tr

Call

Condition: used, Year of construction: 2011, Working hours laser on: 26764 (24.01.2023) h Working hours beam on: 13202 (24.01.2023) h Laser power: 6000 Watt Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 25 mm Max. aluminium: 15 mm Length: 9350 mm Width: 4600 mm Height: 2200 mm Machine weight: 12000 kg Electrical connected load: 109 kVA Standard configuration Standard configuration - Closed machine frame with integrated laser unit - Motion unit for high precision processing - Torque drive in combination with direct linear drives - Enclosed beam delivery system - Single cutting head strategy - Chiller - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 6000 - Maintenance-free radial turbine blower - Radio-frequency excitation - Laser control TASC 3 - Laser power control - Logbook function laser Cutting head - Lens cutting head with 250mm focal length - Universal quickchange device for cutting head (UTI) L23xbexk9z - LensLine with status check - ControlLine: automatic height control and sheet edge detection Control Unit - Control Siemens Sinumerik 840 D SL - 17" Touch screen - Automatic shut down mechanism - Integrated Technology data - Programmable cutting gas pressure Data transmission - USB - interface - RJ45 network connection Safety - CE label - Light barriers - Multi chamber exhaust system - Compact dust extractor Extended machine accessories - nozzle changer Automation - LiftMaster Compact- TruStore 1030

more

Listing

Lübeck

6,765 km

TRUMPF TruLaser 5030 7kW (L16)

Call

laser power: 7,000 W, sheet thickness aluminum (max.): 12 mm, working range: 3,000 mm, total length: 11,100 cm, total height: 2,600 cm, total width: 4,600 cm, workpiece weight (max.): 900 kg, sheet thickness steel (max.): 25 mm, overall weight: 12,000 kg, Condition: reconditioned (used), Year of construction: 2008, Operating hours: 57,306 h, Special equipment: + 5000 on TruFlow 7000 Standard equipment: - Closed machine frame with integrated laser unit - Motion unit for high-precision processing - Gantry drive in combination with linear direct drives - Closed beam guidance - Single cutting head strategy - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow - maintenance-free turbo radial blower - Lens cutting head with 250mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition check - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic switch-off - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection Rcgeb - CE mark - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Complete operating instructions - Lens cleaning case - Transportation locks - Crosshairs/ measuring bridge The machine is currently being overhauled in our factory in Lübeck. After completion of the work, the machine can be inspected under production conditions. Optionally with installation, commissioning and training of up to 3 operators at the buyer's premises for an additional charge, transportation and travel costs.

more

Listing

TRUMPF TruLaser 5030 . Year 2013 . LOW Price

Erfurt

6,718 km

TRUMPF TruLaser 5030 . Year 2013 . LOW Price

Call

laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 20 mm, Condition: good (used), Year of construction: 2013, Technical data Working area: 3000 x 1500 x 150 Max. Sheet thickness: Mild steel 25mm Stainless steel 20mm Aluminum 15mm Operating hours: Beam: 32463 h Laser: 18073 h Equipment Closed machine frame with integrated laser unit Laser unit: TLF 6000 CO2 laser, high-frequency excited Cooling unit, logbook function Automatic pallet changer Longitudinal conveyor belt for small parts / waste Drives: Gantry drive in combination with linear direct drives Laser power control HI-LAS high-pressure cutting PMS plasma sensor system Fast processing with SprintLas ContourLas for the production of small holes Programmable power cycles Microweld Programmable cutting gas pressure setting Laser cutting head 250mm Laser cutting head 250mm Coolline Cutting head quick-change device Ktbhlzulyx Automatic sheet outer edge detection Capacitive height control (DIAS) PCS Process Control System Position laser diode Automatic focus position adjustment AutoLas Plus Oil spraying device for safe thick sheet processing Automatic switch-off Work area lighting Sinumerik 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice TOPS CAD program installed on the machine Safety: Multi-beam light barriers, beam guide fully encapsulated and ventilated with nitrogen, monitoring system, multi-chamber extraction and compact dust extractor, safety cabin Preparation for retrofitting loading device CoolLine for 15mm, 20mm and 25mm mild steel

more

Listing

TRUMPF Haas VMc2 mit Fuchs Absaugung TKFD

Borken

(dealership location)

7,009 km

VectorMark Laser Marker

TRUMPF Haas VMc2 mit Fuchs Absaugung TKFD

€4,500

Laser machine for industrial marking

Call

Condition: good (used), Here we offer you a Trumpf Vectormark laser marker with Fuchs suction and filter devices. Trumpf Vectormark GRUeN 532nm Trumpf VMc2 laser marker, with frequency doubled diode pumped Nd:Yag laser with Hurryscan 10 galvo head from Scanlab Fuchs suction and filter devices TKFD The integrated pre-separator results in a high filter capacity. Different filter stages are possible and perfectly individually adaptable Ideal for confined spaces - can be placed under a table or integrated into machines Welding fume separation class W3, IFA certified Csxwvkku TKFD can also be transported in the trunk without conversion Type: VMc2 Scope of delivery: (See picture) The device comes from a storage solution. We also deliver with express shipping (DHL, UPS, TNT). Further questions we can answer on the phone for you. Written order possible by email or fax

more

Listing

Germany

6,760 km

Laser welding machines

ORLaser LRS EVO 160W

Call

Condition: ready for operation (used), Year of construction: 2017, Main Drive Laser power 160 w Laser type YAG Additional Equipment Ring light incl. adapter -LED with 144 diodes To the standard optics 100 mm we have an additional 160 mm optics Dmmavf This ORLaser LRS EVO 160W laser welding machine was made in the year 2017 in Germany. The machine has a laser power of 160 W. Application Types Laser Welding

more

Listing

ROFIN-SINAR Powerline E Air 25 Luftgekühlt

Ludwigsburg

6,844 km

ROFIN-SINAR Powerline E Air 25 Luftgekühlt

€14,500

Call

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: LW2, Rofin Sinar PowerLine E Air 25 laser system for material processing Best price guarantee General information Protection class 4 Laser sources: Dilas diodes Laser power: 25W Mxwaqc Pilot laser for setting up Focus finder for correct laser focusing Marking power Max. Marking area (L x W) 120mm x 120m or 180 mm x 180 mm Linos Maximum object height 600 mm and extendable up to 1000m Industrial PC with software and dongle included Immediately ready to start, simple operation. The machine can also be rented for 600€ per month without term agreement, monthly cancelable.

more

Listing

Strassberg

(dealership location)

6,847 km

TRUMPF TruLaser 5030 fiber (L41)

Trumpf TruLaser 3030 - 5kW (L20)

Call

Condition: used, Year of construction: 2009, Working hours machine: h Working hours laser on: 93457 h Working hours beam on: 43008 h Laser power: 5000 Watt Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm 0gzyjtrr Length: 9350 mm Width: 4600 mm Height: 2200 mm Machine weight: 12000 kg Electrical connected load: 108 kVA Standard configuration Standard configuration - Closed machine frame with integrated laser unit - Motion unit for high precision processing - Torque drive in combination with direct linear drives - Enclosed beam delivery system - Single cutting head strategy - Chiller - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 5000 - Maintenance-free radial turbine blower - Radio-frequency excitation - Laser control TASC 3 - Laser power control - Logbook function laser Cutting head - Lens cutting head with 250mm focal length - Universal quickchange device for cutting head (UTI) - LensLine with status check - ControlLine: automatic height control and sheet edge detection Control Unit - Control Siemens Sinumerik 840 D SL - 17" Touch screen - Automatic shut down mechanism - Integrated Technology data - Programmable cutting gas pressure- SprintLine- ContourLine- FastLine- AdjustLine- FlyLine Data transmission - USB - interface - RJ45 network connection Safety - CE label - Light barriers - Multi chamber exhaust system - Compact dust extractor Automation

more

Listing

Lübeck

6,765 km

TRUMPF TruLaser 5030 3kW Fiber (L41)

Call

laser power: 3,000 W, sheet thickness aluminum (max.): 15 mm, working range: 3,000 mm, total length: 1,500 cm, total height: 2,600 cm, total width: 3,000 cm, workpiece weight (max.): 900 kg, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 6 mm, overall weight: 12,700 kg, Condition: reconditioned (used), Year of construction: 2010, Operating hours: 32,286 h, machine/vehicle number: Aufbau und Inbetriebnahme möglich, special equipment Additional Equipment: + Air pressure cutting + Clamping claws (2 pieces, for one pallet) + LoadMaster Camjcfamrh + LoadMaster peeling device Standard configuration: Machine - working range in 3000 x 1500 mm - Closed machine frame - Integrated switchboard - Motion unit - Automatic pallett changer - Torque drive in combination with direct linear drives - Beam guidance - Cooling device (water-air) - Integrated electrical cabinets with inside light - Main switch machine and Laser - Transverse conveyor - Slag container - Lighting of working area - Positioning laser diode - Spray lubrication - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF Laser - TruDisk 3001 - 1 output including 10m fiber cable - Cooling device for Laser (water-air) - Stimulation by pumping diodes - Laser Power control - Laser Logbook function Cutting Head - Universal cutting unit with adaptive lens system - Single cutting head - Protection glass against contamination of lens - ControlLine Control - Workshop programming - 17" touch colour screen - Integrated technology data - Automaitc shutdown - Programmable selection of gas - pressure - Diagnostics - Integrated e-Shop Data Transmission - USB-Interface - RJ-45 Interface - Network connection - CE-Marking - Light barriers - Multi chamber suction unit - Integrated compact dust extractor - Machine housing including certified - Electric movable roof

more

Listing

TRUMPF TruLaser 5040, Year 2011. Low Price

Erfurt

6,718 km

Laser system with standard foot switch

TRUMPF TruLaser 5040, Year 2011. Low Price

Call

laser power: 7,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, Condition: good (used), Year of construction: 2011, Technical Data Working area: 4000 x 2000 x 150 Max. Sheet thickness: Mild steel 25mm Stainless steel 20mm Aluminum 15mm Operating hours: Beam: 43719 h Laser: 24158 h Equipment Closed machine frame with integrated laser unit Laser unit: TLF 7000 CO2 laser, high-frequency excited Cooling unit, logbook function Automatic pallet changer Longitudinal conveyor belt for small parts / waste Drives: Gantry drive in combination with linear direct drives Laser power control HI-LAS high-pressure cutting PMS plasma sensor system Fast processing with SprintLas ContourLas for the production of small holes Programmable power cycles Microweld Programmable cutting gas pressure setting Laser cutting head 175mm, 250mm Laser cutting head 250mm Coolline Cutting head quick-change device Automatic sheet outer edge detection Capacitive height control (DIAS) PCS Process Control System Position laser diode Automatic focus position adjustment AutoLas Plus Oil spraying device for safe thick sheet processing Automatic switch-off Work area lighting B30qazff Sinumerik 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice TOPS CAD program installed on the machine Safety: Multi-beam light barriers, beam guide fully encapsulated and ventilated with nitrogen, monitoring system, multi-chamber extraction and compact dust extractor, safety cabin 3.5" disk drive Preparation for retrofitting loading device CoolLine for 15mm, 20mm and 25mm mild steel

more

Listing

Borken

7,009 km

Iridex OcuLight SLx mit Endosonde

€9,500

Laser marking system Laser engraving

Call

Condition: excellent (used), Here we offer you an Iridex laser system OcuLight SLx. Laser IRIDEX Oculight SLx tri-mode 810 nm diode laser. Description: Designed for longevity, with a thermal management system to increase laser conversion efficiency and reliability. Improved user interface with conveniently located, easy-to-understand controls Allows for easy transport between rooms and offices. Tri-mode capability provides three different laser energy delivery modalities: CW pulse, MicroPulse and Long pulse A highly ergonomic user interface, infrared wavelength and a wide range of delivery systems provide a broad spectrum of treatment options Well suited for retinopathy of prematurity and end-stage glaucoma CW pulse mode delivers energy in single or repeat exposures LongPulse mode delivers laser energy over longer periods of time MicroPulse mode delivers laser energy in a series of short duration pulses Allowing for fine control of thermal effects Features: Ophthalmic application area Amplifying medium solid state Ergonomics Benchtop Wavelength 810 nm Treatment laser power: Infrared diode laser 810 nm, 0-3000 mW Target laser power: Red diode laser 650-670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, large spot SLAs, LIO and OMAs Exposure durations: CW pulses 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical Applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also has some unique treatment capabilities, such as Wurv80d transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and and MicroPulse photocoagulation below the threshold diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in the supine position. It is considered an industry first optical design, that eliminates the need for laser focus adjustment and allows a wide range of working distances. Type: Iridex OcuLight SLx Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

more

Listing

Dr. Heinrich Schneider Messtechnik GmbH WMM 600 / 200

Ostrach

6,828 km

Shaft measuring machine

Dr. Heinrich Schneider Messtechnik GmbH WMM 600 / 200

€45,000

EXW ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 38943, Shaft measuring machine WMM 600 / 200 Active rotary axis with SK40 mount 4 axis CNC control with servo motors 3D measurement and evaluation software “SAPHIR” Windows-based user interface Bffc09kgoh0 Learning programming Graphical representation CAD file Calculations/evaluations Protocols / Output / Interface Control and measurement software calculator In 19" rackmount industrial housing, Color RAL 9002 gray white / RAL 3032 ruby red Language for documents and software: German Telecentric diode transmitted light illumination Telecentric lens Magnification 1x Highest resolution CCD black/white camera Windows 7 Ultimate 21.5" TFT color monitor Color inkjet printer Factory calibration certificate Switchable diode reflected light lighting Digitize and BestFit 2D version Centering point 60°, fixed made of tool steel, hardened d=1mm / D=48mm with steep taper SK 40 Centering point 60°, rotating Motor operation and monitoring the opposite tip Workstation 130, sitting position on the right Pneumatic tightening unit The machine is regularly maintained. The last maintenance was on August 4th, 2022 (calibration certificates available). The next maintenance is scheduled for August 2024.

more

Listing

Ludwigsburg

6,844 km

Rofin Sinar Powerline E20

€9,900

tube laser cutting machine

Call

Condition: excellent (used), Year of construction: 2011, Rofin Sinar PowerLine E 20 laser system for industrial material processing Best price guarantee General information Laser sources: Dilas diodes Laser power: 20W Marking power Max. Marking area (L x W) 120 mm x 120 mm Linos Industrial PC with software and dongle included. Immediately ready to start, simple operation. Cek2yc8zfc The machine can also be rented for 500€ per month without term agreement, monthly cancelable.

more

Listing

Strassberg

(dealership location)

6,847 km

Trumpf TruLaser Tube 5000 FIBER 3kW

Call

Condition: used, Year of construction: 2015, Working hours laser on: 32824 h Working hours beam on: 28572 Laser power: 3000 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 21000 kg max. tube length: 6500 mm max. length finished parts: 4500 mm max. tube diameter: 152 / 170 mm min. tube diameter: 12 mm max. tube weight: 25 kg/m Standard configuration Machine: Stable machine frame Pipe support raw material with automatically retractable pipe supports Push-through chuck with self-centering parallel clamping rollers Ccgw8vnq2r High-precision drives LoadMaster Tube 6.5m with bundle trough exclusion station parts tray Pipe support finished part with extendable guide rollers Scrap conveyor belt with bin Closed beam guidance via fiber optic cable (LLK) PierceLine NitroLine FocusLine Programmable cutting gas pressure automatic switch-off Ergonomic control panel with color touch screen Trump TruLaser: External solid-state laser TruDisk 3001 with 1 LLK outlet, diode-pumped disk laser with a wavelength of 1.03 nm Excitation via pump diodes laser power control Logbook function LAser cutting unit: universal cutting unit One cutting head strategy ControlLine control: Sinumerik 840 D SL easy handling Online help Integrated technology data Teleservice via the Internet Data transfer: RJ45 network connector USB Security: CE marking multi-beam light barriers Monitoring system for gas pressure, temperature and cooling water Compact dedusting system Protective cabin with certified safety panes Extended machine accessories - Rapid Cut- Bevel cut technology package- Finished part length +1.5 m (to 4.5 m)- SeamLine Tube- Wireless Operation Point- Low-scratch version LoadMaster Tube 6.5 m- Tube diameter 15 mm Automation - LoadMaster Tube 6,5 m with bundle support

more

Listing

København

6,665 km

imagesetter

Kodak Magnus 400lll Quantum

Call

Condition: excellent (used), Year of construction: 2015, Thermal platesetter including: • Max. plate size: 685 x 762 mm • MCU Multi-cassette unit with 3 cassettes • Quantum diode laser head • F-speed: 22 plates per hour • PC server with Tiff shooter E2mlntm • Bacher punch 425 • Plate count: 32.100

more

Listing

D- Nordrhein-Westfalen

6,955 km

CTP

SCREEN PT-R 4100

Call

Condition: used, Year of construction: 2002, Size: 66 x 83 cm Equipments: 16 Dioden Cux0njivia

more

Listing

Borken

7,009 km

LaserstrahlqÃ¼lle

Coherent AVIA 355-X

€7,500

TruLaser 3040 fiber L50 4KW

Call

Condition: good (used), Here we offer a laser beam source from Coherent. Designation: AVIA 355-X Operating hours: Diodes 39134/45933, Head 39092 Wavelength: 355nm Excitation: diode pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W 60 kHz beam divergence : <0,3 mrad Beam diameter : 3.5 mm 1 / e2 Operating voltage: 240 V AC Mains frequency : 50...60 Hz Applications: Ablation / structuring, marking / labeling, drilling. Materials to be machined: mild steel, stainless steel / CrNi, aluminium, titanium, copper / brass, polymers, fibre reinforced plastics (GRP, CFRP), glass, ceramics Pulse parameters Pulse frequency: single shot up to 100 kHz Pulse duration: less than 30 ns up to 60 kHz pulse-to-pulse stability: <5% rms up to 60 kHz Yu70hssk7 Exit aperture for laser radiation as well as deflection mirror as shown in the pictures included. Type: AVIA 355-X Condition: used / used Scope of supply: (see picture) The device was in operation until disassembly. Further questions we can answer on the phone for you. Written order possible by email or fax.

more

Listing

Leipzig

6,627 km

3D-printer

Sinterit Lisa Pro

Call

Condition: used, Year of construction: 2019, voltage: V/Hz air-pressure connection: bar control: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm Cexuziyobs SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts

more

Listing

Göppingen

6,804 km

TRUMPF TruLaser 3040 fiber

Call

Condition: good (used), Year of construction: 2014, CNC laser cutting machine TruLaser 3040 Fiber (L50) 4000 Watt Machine maintained and serviced with Trumpf maintenance contract X Working range max.: 4000 mm Y Working range max.: 2000 mm Z Working range max.: 115 mm Control: Siemens Sinumerik 840D SL Laser power: 4000 Watt Laser beam on: 27,646 hrs -Sept.2023 Counter laser on: 151.727 hrs -Sept. 2023 Sheet thickness St. Max.: 20 mm Sheet thickness Va. Max.: 15 mm Sheet thickness Al. Max.: 20 mm Sheet thickness Cu. Max.: 8 mm Sheet thickness brass CuZn. Max.: 8 mm Standard equipment: Machine - Working area: 4000 x 2000 - Closed machine frame with integrated cabinet - Torque drive for X in combination with linear direct drives in Y and Z axis - Closed beam guidance via light guide cable (LLK) - Machine cooling unit (right-hand installation) - Integrated control cabinets with interior lighting - Motion unit for high-precision machining - Automatic pallet changer in longitudinal direction - Wide longitudinal conveyor belt for small parts/waste - Ergonomic control panel with touch colour screen - Work area lighting - Position laser diode - Scrambling device - PierceLine - FocusLine - NitroLine High pressure cutting - PlasmaLin - Microweld - Automatic nozzle cleaning TRUMPF Laser - Solid state laser TruDisk 4001 integrated in the machine body with 1 LLK outlet - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - Condition check of the protective glass - ControlLine: height control and sheet outer edge detection Control system - Sinumerik 840D SL control system - 17" touch colour screen - Simple workshop programming - Advanced shop floor programming - Fast post-production - Integrated technology data - Automatic switch-off - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-shop Data transfer - USB interface Safety - CE Smarking - Light barriers - Multi-chamber extraction system - Compact dust extraction system (right-hand installation) - Machine cladding, certified inspection window, door on the right - Sliding roof Bd7c2nflcyc Extra equipment levels Extended laser equipment: -Solid-state laser TruDisk 4001 with 1 LLK outlet. -Capable of retrofitting max. 1 additional LLK outlets on the Tru Disk Extended machine equipment: -Right-hand machine set-up - Nozzle changer -copper cutting package -Brass cutting package - DetectLine - Wide cross conveyor belt with tilting hopper Right-hand installation - Viewing window door left for extended view - Preparation interface for Liftmaster Store (without Liftmaster) - Store interface

more

Listing

Strassberg

(dealership location)

6,847 km

Laser beam source with PC

Trumpf TruLaser 5030 Classic

Call

Condition: used, Year of construction: 2008, Working hours laser on: 57785 (23.03.2022) h Working hours beam on: 40160 (23.03.2022) h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 11100 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg Electrical connected load: 105 kVA Standard configuration - Closed machine frame with integrated laser unit - Gantry drive in combination with direct linear drives- Automatic pallet changer- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Oil spray device- HI-LAS- HI-LAS Plus- AutoLas Plus- PMS Plasma sensor- PCS TRUMPF Laser- CO2 laser TLF 5000- Cooling unit- Radio-frequency excitation- Laser power control- Programmable cutting gas pressure- Logbook function laser Cutting head- Universal quickchange device for cutting head Control Unit- Control Siemens Sinumerik 840 D- Automatic shut down mechanism- DIAS III- ContourLas- SprintLas- RJ45 network connection- Spray device for reliable thick plate machining Safety- Light barriers Programming - Workshop programming ToPs 100 lite Bzphud9ro Extended machine accessories Automation

more

Listing

D- Nordrhein-Westfalen

6,955 km

CTP

Screen/FujiFilm PT-R 4100

Call

Condition: used, Year of construction: 2005, Size: 66 x 83 cm Equipments: HQ RIP Ceackwvdkb 16 Dioden

more

Listing

Borken

7,009 km

Coherent AVIA 355-X 40227006

€7,500

Call

Condition: good (used), Here, we offer a laser beam source of coherent with PC. Name: AVIA 355-X Hours of operation: Diodes 1975/1975, head 26488 Wavelength: 355nm Suggestion: diodengepumpt Laser type: Nd: YAG laser Laser type 2: THG, Q-switch Mode: pulsed Laser power: 10 W at 60 kHz Beam divergence: < 0.3 mrad Beam diameter: 3,5 mm at 1 / e2 Operating voltage: 240 V AC Mains frequency: 50... 60 Hz Applications: Removal / restructuring, labeling / marking, drilling Materials for processing: structural steel, stainless steel / stainless, aluminum, titanium, copper / brass, polymers, fibre-reinforced plastics (GFRP, CFRP), glass, ceramics Pulse parameters Pulse frequency: single shot up to 100 kHz Pulse duration: small 30 ns to 60 kHz Pulse to pulse stability: < 5% rms up to 60 kHz 9zg0epwkn Exit opening for laser radiation and deflecting mirror as shown on the pictures to see incl. Type: AVIA 355-X Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

more

Listing

Strassberg

(dealership location)

6,847 km

Amada FO 4020 NT

Call

Condition: used, Year of construction: 2006, machine/vehicle number: 37420077, Working hours machine: 31814 h Laser power: 4000 Watt Working range laser: 4070 x 2050 x 200 mm Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 10 mm Length: 12300 mm D2gs3kf Width: 3350 mm Height: 2500 mm Machine weight: 14000 kg Electrical connected load: 83 kVA Standard configuration Maintenance information: - TURBO BLOWER changed at 24,000 h (new Turboblower with 6,400 h) - O-rings and tubes changed at 30,000 h (Fanuc) - All maintenance performed by AMADA Control:Type: AMNC-F (Fanuc FS-160iLB)Screen: 15 "touch screenConnections: RJ45 and USB features:- Automatic pallet changer- POWER PIERCING- High pressure cutter CLEANCUT- Aluminum cutter ALUCUT- Automatic gas pressure control- Non-contact capacitive laser cutting head- Diode laser for positioning- Active cutting monitoring- WACS (Water Assisted Cutting System) cutting device- Safety device Peripherals:- Transformer- cooler- Suction

more

Listing

D- Nordrhein-Westfalen

6,955 km

CTP

Heidelberg Suprasetter A 52 / A74

€7,000

FCA ONO plus VAT

Call

Condition: used, Year of construction: 2007, Size: 520 mm Equipments: Cbenzogvoc software meta shooter 4 (TIFF Shooter) Resolution: 2540 dpi Plate counter: 11594 pieces Internal punch: 225 mm RIP with Dongel Light source: 1 laser head Gen II, 160 mW, 64 laser diodes Thermal CTP Productivity: 17 plates per hour license only A 52 Laser imaging time: 1376,64 hours Prinect Software

more

Listing

Borken

7,009 km

Laser beam source

Coherent AVIA 355-X mit PC

€7,500

Call

Condition: excellent (used), Here we offer a laser beam source from Coherent. Designation: AVIA 355-X Operating hours: Diodes 43022/43022, Head 42955 Crystal Shifter: 1845.91 hours Wavelength: 355nm Excitation: diode pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence : E989p72oo

more

Listing

Strassberg

(dealership location)

6,847 km