Used Infrared for sale (244)

Condition: good (used), Inductive sensor, electronic sensor, proximity switch, infrared sensor, IR sensor, web edge sensor, photoelectric sensor -Manufacturer: Fife, infrared sensor -Type: SE-42R M280746 Iedpfx Amoxv R Iueyoat -Number: 10 sensors available -Price: per piece -Dimensions: 140/100/H25 mm -Weight: 0.1 kg/pc.

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Iaodjwnm Ukepfx Amyet Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Hettich CombiDancer Infrared Vortex-Evaporator with PoleStar Cold-Trap System (2005) For sale is a complete Hettich CombiDancer high-speed evaporation system (Hettich AG, Switzerland) — a premium parallel evaporator for rapid, gentle, and reproducible solvent evaporation, from light volatile ethers to high-boiling solvents such as DMF and DMSO. Decommissioned from a chemistry laboratory in fully functional condition with no known faults. Formally decontaminated (written certificate included). Never used in a biological or isotope environment. Highlights • Complete, ready-to-run system: CombiDancer + PoleStar cold-trap + diaphragm pump + rotary vane pump • 3–10× faster than conventional rotary evaporators; no sample balancing, no rotating parts in the chamber • Accepts large tubes, HPLC vials, Falcon tubes (15/50 ml), Eppendorf tubes, scintillation vials, microtiter/deep-well plates • Three independent heating zones (halogen IR, compartment heater, heated shaker plate) • PoleStar freezes solvents to –45 °C; rotary vane pump reaches 0.01 mbar for high-boiling solvents • Original paper manuals (CombiDancer & PoleStar) included CombiDancer Specs • Vacuum chamber: V4A stainless steel, Ø 360 × 180 mm • Vortex: 200–1,000 rpm • Temp: 20–80 °C • Vacuum: DN25 • Gas fittings: 2× 6 mm Swagelok • RS232 (VP, CT, PC) Isdpjy Nmi Rsfx Amyoat • 230 VAC / 1,800 VA • 765/930 × 695 × 470 mm / 78 kg PoleStar Cold-Trap Specs • Capacity: 3.3 L • Cooling: –45 °C • Vacuum: 0.01 mbar • Vessel: aluminium FEP-coated • Coil: V4A stainless steel • 230 VAC / 660 VA • 520 × 430 × 530 mm / ~45 kg Pumps Included • Vacuubrand PC2003 VARIO + CVC 2000 controller (oil-free diaphragm, auto vapor sensing) • Vacuubrand RZ 6 (rotary vane, deep vacuum) Scope of Delivery • CombiDancer unit • PoleStar cold-trap • both vacuum pumps • mobile cart • original manuals • decontamination certificate Typical Applications • Analytical chemistry / SPE • combinatorial chemistry / HTS • pharma R&D • natural product & botanical extract workflows • food, cosmetics & life sciences

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Ijdpfjy Nkqxex Amyeat Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: new, Year of construction: 2023, Infrared Dryer IR-TEX MINI, 700mm Belt width: 700mm, spot width: 500mm, cover length: 1m, total length: 1.8m, heating: 4 kW, connection: 400V, 50Hz Ijdpfxsh Tyw As Amyoat Infrared drying channel for textiles with ceramic spots, Teflon-coated belt, electronic conveyor control, heating variable via Digi-Thermo, suitable for a small number of items, compact construction, insulated cover.

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Iajdpfew A Rdrex Amyst Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Heating system: Infrared Overall dimensions: Width: 4000 mm Depth: 2600 mm Height: 2000 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Iasdpfx Amoqvlvmeyst Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low-noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2.5 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Iasdsqvlu Espfx Amyet Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, functionality: fully functional, fuel type: gas, Year of construction: 2026, Equipment: 4 in one shovel, Infrared Asphalt Heater MIRA-1 Iasdpsq Rcrqofx Amyot Infrared Asphalt Heater MIRA-1 by TICAB TM is compact and powerful device. Best for small patch repairs. It is quite reliable and highly effective in use SPECIFICATIONS: - Propane fuel. - Controls - mechanical. - 2 gas bottles. - Consumption - 5-5.5 kg / h (depending on the outside temperature). - Weight 120 kg. Effective in the repair of: • Potholes. • Raising manhole and utility covers. • Failed pavement joints. • Joint asphalt repair.

Condition: new, functionality: fully functional, Year of construction: 2026, Pothole Repair Complex MIRA-3 Pothole Repair Complex MIRA-3 by TICAB TM is a unique road repair system developed by TICAB engineers for optimization of road patching works. MIRA-3 complex includes infrared asphalt heater, asphalt recycler and bitumen emulsion sprayer. How to use MIRA-3 Complex: - Heating of the repair place. Ijdpst Itzzsfx Amysat - Add a hot asphalt from the asphalt recycler. - Spraying the bitumen emulsion. MIRA-3 includes: - Infrared Asphalt Heater MIRA-3. - Bitumen Emulsion Sprayer BS-100. - Asphalt Recycler RA-500.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), Airrex AH 300i Mobile Infrared Heater Tank: 45 l Output: 15 kW Suitable for spaces up to 1500 m³ Highly economical – fuel consumption 1.05 – 1.24 l/hr Dimensions (LxWxH): 95 x 30.5 x 101 cm Weight: 46 kg Adjustable temperature range: 0 – 40°C Mobile, equipped with swivel casters Ready for immediate use – just plug in and switch on Clean combustion – no chimney required! App control – set temperature, receive notifications, and check fuel levels directly from your smartphone Dry heat – no condensation as with gas heaters Ijdeylv Iyopfx Amyjat Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no burning smell Complies with the latest EU emissions directive Automatic restart after power outage

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), Airrex AH 800i Mobile Infrared Heater Tank: 70 l Output: 22 kW Suitable for spaces up to 2000 m³ Highly economical – fuel consumption 1.7 – 1.9 l/hr Dimensions (LxWxH): 130 x 35 x 134 cm Weight: 81 kg Adjustable temperature range: 0 – 40°C Mobile, mounted on caster wheels Ready to use immediately – just plug in and switch on Iaedpfjylv Dzex Amyot Clean combustion – no chimney required! App-controlled – set temperature, receive notifications, and check fuel level directly on your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no combustion odors Complies with the latest EU emissions directive Automatic restart after power failure

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  Iasdpfx Asxp H S Aomyet schonende und schnelle Trocknung.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2008, condition: used, functionality: limited functionality, working width: 2,000 mm, machine/vehicle number: AIDB0007, NIR sorter Pellenc Mistral 2000 in ready-to-use condition; operated only with dry material, including steel construction, acceleration belt, and expansion hood with separating edge. Iaodjymlvpspfx Amyot

Year of construction: 2007, condition: excellent (used), functionality: fully functional, working width: 1,000 mm, machine/vehicle number: XB005M A551335-01, Near-infrared device Tomra Polysort 1000 in very good condition, operated only with dry material. Includes acceleration belt and expansion hood with separation head. Iaedjymlqmopfx Amyet

Condition: used, Switchgear, control, flame sensor, flame monitor, UV flame sensor, UV sensor Iajdpfx Amef H Hy Ajyst -Manufacturer: Siemens, infrared flame sensor OVP -Type: QRA55.C17 -Voltage: 100-110 V -Dimension box: 220/65/H65 mm -Weight: 0.5 kg

Condition: excellent (used), For sale: a hexagon infrared detail probe in very good condition. Purchased a year ago from a machinery auction site. I haven't installed or used it yet. I don't think I'll need it again, so I'm selling it. After inserting the batteries, the blue LED lights up for a few seconds, as described in the manual. It appears to be very lightly used. It's not caked with oil, as can sometimes happen with long-term use. It comes with an HSK63 holder, which can be exchanged for another holder system.The kit includes everything pictured, along with an additional stylus and service tools. Iedpfsxpumzex Amysat

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Iedpfjf I Ew Hox Amyeat Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Scattered light Iodpfx Amen Arm Toyoat

Condition: used, Year of construction: 2011, Passage width: 3000 mm. Passage height: 30 mm. Iodpfx Ajwptxlsmyoat Inlet section to the system: Length approx. 2250 mm. Outlet section: Length approx. 3970 mm. Total length: approx. 10,220 mm.

Condition: used, Year of construction: 2012, Heater Element Welding Machine with Infrared Technology (Upper & Lower Sections) – Year of Manufacture: 2012 For sale is a robust and reliable heater element welding machine equipped with infrared radiators, featuring both upper and lower sections. The system has been previously used for welding two housing halves and is ideally suited for thermoplastic materials or similar applications. Manufactured by MTV, this machine is technically solid and designed for continuous industrial operation. A comprehensive German operating manual is included. Technical Specifications Machine Dimensions Width: approx. 2325 mm Depth: approx. 1350 mm Height: approx. 2130 mm Weight: approx. 800 kg Electrical Connection Data Operating voltage: 400 V AC Control voltage: 24 V DC Fuse protection: 16 A Frequency: 50 Hz Power supply cable: 5 × 2.5 mm² Pneumatics Operating pressure: min. 6 bar – max. 8 bar (constant) Iedjxyibzspfx Amysat Description / Condition Year of manufacture: 2012 Location: Thuringia Application: Thermal welding of plastic components Previous use: Welding two housing halves Design with infrared heating elements for efficient and uniform heating Very robust machine construction, suitable for industrial applications Overall in good condition. _____ Our terms and conditions (AGB) apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technical condition and wear of the items correspond to their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, Patented electric heating solution for efficient and cozy heating. Heat output 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) for approx. 10-35 sqm area at approx. 2.5 m room height Connected load 11.8 A Dimensions 54x29x80 cm Isdpfx Aeqvmcpsmyjat Weight 15 kg

Condition: used, This listing is for the Stuart CR302 Infrared Hotplate stirrer The unit is in full working condition and is ready for immediate use Overview & Key Features Infrared (IR) Heating: Utilizes a 900 W infrared heater—this allows it to boil 1 litre of water over 30% faster than standard 1200 W ceramic hotplates. Powerful Magnetic Stirring: Equipped with rare-earth magnets, it can stir up to 15 litres of liquid. Stirring speed is adjustable, ranging from 100 to 1500 rpm, with feedback control to maintain steady rates. Temperature Capability: The hotplate can reach a maximum temperature of 400 °C. Ijdpfx Asxhfq Uemyeat Size & Portability: Hotplate surface: 30 × 30 cm Overall dimensions: approximately 32 × 37 × 11 cm (W × D × H) Weight: about 4 kg Power Supply: Designed for use with 240 V, compatible with standard UK lab mains at 50/60 

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains It is possible to change the screw diameter Dimensions: Weight: 2500 kg Iaedpfx Aey Smm Iemyst Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Isdpfx Asy Sl Eiemyeat Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request