Used Diode for sale (105)

Condition: new, mileage: 153 km, power: 566 kW (769.54 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * Maximum permissible gross train weight: 40 tons * Chassis width: 2550 mm * Chassis height: low * Wheelbase: 3750 mm * Steering position: left ----Engine * Drive: combustion engine * Engine output: 566 kW (770 hp) * Engine type: DC16 123/770 hp * Displacement: 16 liters * Emission standard: Euro 6 * Engine management system: EMS10 * Torque reduction NOx control: with * Oil quality: Scania LDF-4 ----Fuel and Exhaust System * Fuel: diesel * Right fuel tank: 485 liters * Left fuel tank: 615 liters * Fuel tank material: aluminum * SCR AdBlue tank under left frame: 124 liters * DPF particulate filter: with (volume: 23.4 dm³) * Exhaust outlet direction: left ----Transmission * Transmission type: GRSO926R (Range and Split) * Opticruise: with * Retarder: Scania R4100D * Driving modes: Economy, Standard, Power mode * Eco-Roll: with * Kickdown: with ----Axles and Wheels * Front axle type: AM420S * Rear axle type: AD400SA * Differential lock: with * Front tire size: 385/65 R22.5 * Rear tire size: 315/70 R22.5 * Tire brand: Michelin * Rim material: steel ----Brakes * Brake control: electronic (EBS7) * Hill hold: with * ABS/EBS: 4S/4M * Exhaust brake: with * Compressed air tank capacity front: 60 dm³ * Compressed air tank capacity rear: 30 dm³ ----Cab * Type: CS * Roof height: high * Color: Jade Blue (RAL5021 CM) * Air conditioning: with (automatic control) * Auxiliary heater: WTA cab heater 3 kW * Roof hatch: electric * Driver's seat: Premium, V8 leather black with red stitching, seat ventilation and lumbar support * Passenger seat: with tilt adjustment, V8 leather black with red stitching * Lower bunk: extendable 800–1000 mm, pocket spring mattress * Upper bunk: width 800 mm * Navigation: with (Europe maps) * Bluetooth: with * Audio system: AUS4 Premium Infotainment * Navigation / DAB+ / Bluetooth / Traffic * USB ports: driver, passenger side and rear wall * Remote control for climate and infotainment * Microwave oven ----Lighting * Headlights: LED * Fog lights: LED (3 diodes) * Daytime running lights: LED with position lights * Rear lights: LED * Cornering lights: with * Headlight cleaning system ----Steering * Steering gear: THP90 * Steering wheel type: V8, tilt and telescopic * Steering angle: right max. 45°, left max. 50° ----Suspension * Front axle suspension: parabolic leaf spring * Rear axle suspension: air suspension (2-spring system) * Level control: fast, truck and trailer ----Additional Equipment * Fifth wheel coupling: FISCHER SK-S36.20 2/150 * Cool box: driver/passenger side * Microwave oven: with * Rear mudguards: plastic * Rearview mirrors: electrically adjustable and heated ----Certificates * Emission class: Euro 6 Bledpsxw Dudsfx Ahdep * Advanced Emergency Braking: with * Lane Departure Warning System (LDWS): E4 - 130R - 000010 EXT.12 * Driver alertness support * Scania lane change warning system * Tachograph: smart 2 STONERIDGE ---- * Tire size front axle: 385/65R22.5 * Tire size rear axle: 315/70R22.5 * Fuel tank capacity: 615 + 485 liters * AdBlue tank: 125 liters * Permissible total weight: 19,500 kg * Wheelbase: 3750 mm * Safety inspection due: expired ----Vehicle number/Vehicle: 11534----Subject to errors and prior sale----Advertising and various decals have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Let us know your wishes and suggestions and we will take care of them for you. Among other things, we can offer you the following for an additional charge...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, controller model: Siemens 840D, laser type: fiber laser, laser power: 2,000 W, sheet thickness (max.): 8 mm, overall weight: 20,000 kg, No reserve – guaranteed sale to the highest bidder! DURMA laser cutting system – fully equipped! TECHNICAL DETAILS Maximum sheet thickness: 8 mm Maximum steel sheet thickness: 8 mm Maximum stainless steel sheet thickness: 4 mm Maximum aluminum sheet thickness: 6 mm Maximum tube diameter: 170 mm Maximum tube length: 6,500 mm Maximum round tube diameter: 170 mm Maximum square profile: 120 x 120 mm Maximum rectangular tube: 150 x 100 mm Minimum tube diameter (automatic): 20 mm Minimum tube diameter (manual): 12 mm Minimum processable tube length: 185 mm Minimum processable wall thickness: 0.8 mm Maximum processable wall thickness (mild steel, 2 kW laser): 8 mm Maximum processable wall thickness (stainless steel, 2 kW laser): 4 mm Maximum processable wall thickness (AlMg3, 2 kW laser): 6 mm Repeatability: 0.05 mm Maximum profile length: 6,500 mm Minimum profile length for automatic loading: 3,000 mm Standard discharge length: 4,000 mm Maximum profile weight: 37.5 kg/m Maximum loading capacity: 3,000 kg Possible loadable profiles: round, square, rectangular, elliptical MACHINE DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser power: 2,000 W Power: 2 kW (2.72 HP) Control system model: Siemens 840D Automation level: Automatic Actuation type: Electric Dimensions & Weight Dimensions (L x W x H): approx. 16,000 x 7,400 x 2,364 mm Weight: approx. 20,000 kg EQUIPMENT CE marking Documentation/manual Cooling unit Emergency stop switch Fume extraction Safety light curtain Central lubrication system Precitec Autofocus Procutter cutting head F 150 (Focus) Control cabinet air conditioning Manual loading Manual unloading Laser positioning diode Central lubrication unit Small parts disposal box Illuminated cutting chamber IPG laser source 2 kW Vanterm compact filter unit Automatic loading system (6,500 mm) Bsdpfxsy N Rqro Ahdolp Unloading unit (6,000 mm) Discharge conveyor, inc. small parts conveyor (rear discharge) Automatic cut seam detection Automatic real-time measurement system for centering chuck Calcium carbonate dosing unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 11,360 h, machine/vehicle number: 1115000189 7, table length: 400 mm, table width: 300 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, table load: 50 kg, No minimum price - guaranteed sale to the highest bidder! Bjdpfx Aey N N Ivjhdolp TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis (focusing axis): 500 mm Rapid traverse X/Y/Z: 20 m/min Acceleration: 0.3 g Table size: 400 mm x 300 mm Table load capacity: max. 50 kg MACHINE DETAILS Laser type: Nd:YAG (lamp) / Nd:YVO4 (diode) Average laser power (lamp): 100 W Average laser power (diode): 15 W Laser spot diameter: approx. 0.03 mm Laser area: 60 mm x 60 mm Weight: 2,200 kg Voltage: 400 V Operating hours Cutting hours: 11,360 h Power-on hours: 45,628 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Blodpsz A D Irefx Ahdjp Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 23,000 h, controller model: Siemens Sinumerik 840D SL, laser type: fiber laser, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, The machine was overhauled in 2025! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser type: Fiber laser Bjdox Tuk Dspfx Ahdjlp Laser power: 5,000 W MACHINE DETAILS Control: Siemens Sinumerik 840D SL Year of last overhaul: 2025 Laser beam transmission: Fiber optic Machine chiller unit: Water-air Laser chiller unit: Air-water Operating hours: 23,000 h EQUIPMENT CE marking Nozzle changer Chiller unit Emergency stop switch Safety light barrier Dust extraction system Machine frame with integrated control cabinet Automatic longitudinal pallet changer Axis drive with linear motor technology and torque motor Integrated control cabinet lighting Central main switch Longitudinal chip conveyor Working area illumination Laser positioning diode Oil vaporization system PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Transport and positioning device Universal laser cutting head with adaptive lens system Single-head strategy Cutting head protective window Online monitoring of protective window ControlLine Automatic standstill Program-controlled cutting gas pressure regulation FastLine FlyLine AdjustLine Remote maintenance via internet Simple workshop programming Copper processing package Brass processing package Micro welding Multiple sheet processing Condition Guide USB interface RJ-45 network card Central connection Segmented extraction unit Compact dust collector Machine cabin with safety windows Electrically opening roof Commissioning Network configuration via remote maintenance Solid-state laser TruDisk 5001 (5 kW) with fiber output DetectLine Machine layout right-hand side Interface for LiftMaster Compact

Condition: new, Coherent OEM laser diode pump module / laser block LDP.1108303, unused, 100% functional, scope of delivery as shown in the photos. Bledpfjzkc Upex Ahdep

Condition: as good as new (ex-display), Year of construction: 2024, Manufacturer: DURMA Model: HD-F 3015 III Fiber Year of manufacture: 2024 Working area X-Y-Z: 3060x1530x160 mm Laser power: 4000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet metal thickness, mild steel: 20 mm Sheet metal thickness, stainless steel: 10 mm Sheet metal thickness, aluminum: 12 mm Sheet metal thickness, brass: 10 mm Sheet metal thickness, copper: 6 mm Bodpfjd Sd Tnsx Ahdslp Sheet metal size: 3048x1524 mm Load capacity: 200 kg/m² Speeds, X-Y axes: 100 m/min Simultaneous speeds, X-Y axes: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet metal position and size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 4000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet detection and measurement Automatic nozzle changer Camera Inside The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, ATiB HTUB 80/100-L HF Charger The HTUB is a top-of-the-line HF charger designed for maximum performance. This range encompasses all the key features of HF chargers in terms of efficiency, power factor, ventilation, internal structure (dedicated 3 compartments), and overall flexibility. An integrated digital interface with an OLED display and built-in USB enables the best and easiest monitoring/adjustment of charging parameters, diagnostics, and data reports. Key Features AC input voltage: 480Vac (3-phase) 50-60Hz / 600Vac (3-phase) 50-60Hz Display: OLED/LCD display, 4 LEDs, and 4 control buttons Adjustment type: Via OLED display: current, capacity, and 7 pre-set charging profiles Via PC/laptop/USB connection: advanced programming Data storage: Report on the last 50 charging cycles and important technical data (integrated USB connection) Cooling system: Dedicated air cooling directly to the heatsink. Temperature-controlled fan speed. Standby mode within +104°F (+40° C) internal component temperature Efficiency: ≥ 92% Operating temperature: +32° to +104°F (0° to +40° C) Certification: CSA Safety Features Input protection: 3x fast-blow AC fuses Output protection: Ultra-fast fuse (reverse polarity protection) Thermal protection: Sensors on IGBTs, diodes, and power transformer (maximum temperature adjustable) with derating Protection during battery disconnection: Undervoltage safety shutdown (direct battery disconnection) Mechanical Properties Bsdpfx Ajxuqrwehdslp Dimensions (L x W x H): 456 x 195 x 570 mm Degree of protection: IP 21 (vertical) – Dedicated air cooling directly to the heatsink. Weight: 28 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,130 h, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, Submitting a bid entails an obligation for timely collection by 30.04.2026! Increased pressure to dispose - therefore reduced listing duration and lower minimum price! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Accuracy Minimum incremental movement: 0.001 mm Positional deviation: ± 0.1 mm Positional repeatability: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Pulse frequency: 0.01 - 10 kHz Gases: CO₂ / N₂ / He Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 15 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Operating hours Beam-on time: 21,660 h Laser-on time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar EQUIPMENT Cooling unit, logbook function Automatic pallet changer Gantry drive combined with linear direct drives Laser power control HI-LAS high-pressure cutting PMS plasma sensor technology Programmable power cycles Programmable cutting gas pressure regulation Laser cutting head with 5" lens and 7.5" lens Quick-change system for cutting heads Automatic sheet edge detection APC capacitive height and process control PCS (Process Control System) Laser diode positioning Automatic focus adjustment (AutoLas Plus) Spray device for safe thick sheet processing Automatic shut-off Work area lighting Open PC-based control system Blsdpeyynuiefx Ahdsp Online assistance Diagnostic functions Maintenance logbook Technology data Remote maintenance Safety Multi-beam light barriers Fully enclosed beam guidance with nitrogen flushing Monitoring system Multi-chamber extraction and compact dust collector Protective enclosure Machine system software

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Bedpfx Aoz D Evaehdolp Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: as good as new (ex-display), Year of construction: 2024, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, positioning speed: 5 m/min, repeat accuracy: 5 mm, overall weight: 12,000 kg, warranty duration: 12 months, working range: 3,050 mm, Equipment: safety light barrier, Manufacturer: DURMA Model: HD-F 3015 III Fiber Working area X-Y-Z: 3060x1530x160 mm Laser power: 10000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 30 mm Sheet thickness, stainless steel: 26 mm Sheet thickness, aluminum: 15 mm Sheet thickness, brass: 20 mm Sheet thickness, copper: 15 mm Sheet size: 3048x1524 mm Load capacity: 200 kg/m² Speeds, X-Y axes: 100 m/min Speeds, X-Y axes, simultaneous: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint (L/W/H): approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication Bjdpfx Ahodx Nalodslp Simple user interface, parameter page (power, speed, pressure) External CAD/CAM programming software with auto-nesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 10000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/scrap Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer detection, measurement Automatic nozzle changer The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Further machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2025, skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications The skylaser laser marking / engraving laser at a Glance: Processing Area : from 110 x 110 or 120x120 or 300x300 mm (depending F- Theta lenses / 3D option) Laser: IPG ( pulsed fiber laser , YTTERBIUM PULSED FIBER LASER ) SCANLAB galvanometer Nominal laser power : 20W / 30W / 50W New: Software controlled variably adjustable working width ( X axis max 200mm depending on the design . ) Included! Bjdsbv Dayspfx Ahdolp New: Software controlled variably adjustable working height ( Z axis max 400mm depending on the design . ) Included! Optionally, other work areas - Automatic Materialzufuehrung etc. Air cooling as low power consumption Labeling speed: up to 5000 mm / s ( SCANLAB dyn AXIS ® galvanometer to reach 10 SCAN ® cube marking speeds of up to 640 characters per second. ) Redundant safety system Laser Class 1 according to the configuration or Laser class: 2 ( optional pilot through laser ) piper -technology HQ mirrors and optics for perfect results , powered by Scanlab (R ) piper -technology industrial PC with the software pre-installed control New: including Laser Focus Finder New: including process air control Optional : laser positioning : an integrated diode laser for optimal positioning Including new F -theta lens 110 x 110 mm working area with protective glass! ( To extend the working range of optional (120, 180 , 350 mm) virtually maintenance-free Key Features Let yourself be inspired and please request our product video on your sample production ! Model Mark IPG laser engraving laser skylaser Work size 100 x 100 or 120 x 120 mm (F -theta 160mm ) other optional Laser power 20 / Option: 30/50 W ( air cooled) laser method YTTERBIUM PULSED FIBER LASER Engraving

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 14,434 h, controller model: Siemens Sinumerik 840D, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: safety light barrier, TECHNICAL DETAILS Laser power: 4,000 W Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Sheet metal thickness, steel (max.): 20 mm Sheet metal thickness, stainless steel (max.): 15 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D Beam-on hours: 14,434 h Power-on hours: 39,875 h EQUIPMENT Closed machine frame with integrated laser unit Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo-radial blower, mirror telescope Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Maintenance-free three-phase AC servo motors Blsdoy Rk Uyopfx Ahdop Additional high-dynamic Xp-axis Cutting head quick-change device Laser cutting head with 5" lens and 7.5" lens Cutting gas pressure setting, programmable APC capacitive height control and process control Automatic focus position adjustment AutoLas Plus Laser power control Positioning laser diode HI-LAS high-pressure cutting Fast processing with SprintLAS ContourLAS for producing smaller holes PMS plasma sensor Automatic sheet metal edge detection Programmable power cycles Compressed air cutting PCS Process Control System Microweld Spraying device for safe thick sheet metal processing Automatic shutdown Work area lighting Workshop programming ToPs 100 lite Control: Siemens Sinumerik 840D Open control system based on PC, easy operation, online help, integrated e-shop, diagnostic function, maintenance log, technology data, teleservice Safety equipment: Multi-beam light barriers, beam guidance completely encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,790 h, controller model: B&R APC 910, laser power: 3,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Laser power: 3,000 W Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 16 mm Sheet thickness (aluminium): 12 mm Travel speed: 100/140 m/min Accuracy: 0.1 mm MACHINE DETAILS Control: B&R APC 910 Connected load: 33 kVA Dimensions & Weight Space requirement: approx. 7,800 x 5,900 x 2,300 mm Machine weight: approx. 11,400 kg Controller power-on hours: 2,472 h Operating hours: 15,907 h Laser power-on hours: 7,790 h EQUIPMENT Integrated solid-state laser TruDisk 3001 with 1 fiber output Fully automatic pallet changer (with light barrier) Enclosed machine frame with integrated components Bsdjyhmxuspfx Ahdslp Motion unit for high-precision processing Drives with maintenance-free three-phase servo motors Sheet support accessible from both sides Enclosed beam guidance via laser light cable (fiber optic cable) Fully integrated chiller for laser and machine Integrated control cabinet Travelling fume extraction system Slag drawers 19" touch colour screen TruDisk power supply via machine Workspace lighting Positioning laser diode PierceLine FocusLine NitroLine Transport and installation device Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) TRUMPF Laser Fiber optic cable as per standard layout (laser placed directly next to machine) Excitation via pump diodes Laser power control Laser logbook function Universal cutting unit Pierce head strategy Protective glass against lens contamination ControlLine: Height control and detection of sheet outer edge Simple drawing module Easy workshop programming Quick reproduction Integrated TRUMPF technology data Auto shut-off Programmable cutting gas/pressure selection ContourLine FastLine Microweld Tele-service via Internet Microjoint - handling at the control panel Adjustable dynamics Data transfer RJ45 network connection and USB interface CE mark Compact extraction unit Machine enclosure with certified viewing windows Motorised front door and rear access Enclosed machine roof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 24,314 h, machine/vehicle number: A0230A1231, laser power: 6,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Blsdeyynu Nopfx Ahdep Bidding obligates the buyer to collect the machine by 30.04.2026! Due to increased selling pressure, the auction period has been shortened and the reserve price reduced! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 100 mm Laser power: 6,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited Max. workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Positioning speed simultaneous (X+Y): 300 m/min Max. sheet thickness steel: 25 mm Max. sheet thickness stainless steel: 25 mm Sheet thickness aluminum: 15 mm MACHINE DETAILS Power-on hours: 55,176 h Cutting hours: 24,314 h Control model: Siemens Sinumerik 840D Control features: - Open PC-based control system - Online support - Diagnostic functions - Maintenance logbook - Technology data - Remote maintenance Safety equipment: - Multi-beam light barriers and guard enclosure - Fully enclosed beam path with nitrogen ventilation - Monitoring system - Multi-chamber extraction and compact dust collector Paint finish: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with linear direct drives ADDITIONAL EQUIPMENT - Cooling unit - Logbook function - Automatic pallet changer - Laser power control - HI-LAS high-pressure cutting - PMS plasma sensing - Programmable power cycles - Programmable cutting gas pressure regulation - Laser cutting head with 5" lens and 7.5" lens - Quick-change system for cutting heads - Automatic sheet edge detection - APC capacitive height control and process monitoring - PCS (Process Control System) - Laser diode positioning - Automatic focus adjustment (AutoLas Plus) - Spraying device for safe thick sheet processing - Automatic shutdown - Work area lighting - Fully enclosed machine frame with integrated laser unit

Condition: as good as new (ex-display), Year of construction: 2024, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 watts Control system: Siemens Sinumerik 840D Operating hours: 24 hours Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 optional) Max. dimensions of square profiles: 120x120 mm Max. dimensions of rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability accuracy: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H, C, U, L *Footprint L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on the equipment variant Standard equipment Control system Sinumerik 840D Bodpfx Ahsd Tt Atsdelp Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for outputting analog values (power, speed, pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 watts (including cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Bodpfefh Dmzsx Ahdolp Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: new, Year of construction: 2024, Tube and Flat-Bed Laser 4 kW | Combination Unit HD-F 3015 BH Laser Combination Machine Machine Dimensions: • (L x W x H) 9,350 mm x 3,800 mm x 2,300 mm, length including filter 5,300 mm. Technical Details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 4 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting Range: • Steel: 20 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 12 mm • Brass: 10 mm • Copper: 6 mm Equipment: IPG 4000W fiber laser source (including cooler) Compact dust extraction (filter) for 4 kW Air conditioning unit in the control cabinet Flat-bed laser with automatic exchange table Laser cutting monitoring Automatic laser head positioning CE - exchange table with light curtain safety system Control system SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 focus Blsdpfxefl T T Nj Ahdsp Flat-bed laser with exchange table (automatic pallet change system) Tube cutting device, side mounting, max. Ø400 mm Sheet metal inspection (automatic sheet metal position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Lighting for the work area Multi-chamber extraction system Warning light Special laser cutting options Positioning laser diode Piercing line (piercing settings) Focus line Plasma line Fast line Fly line Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, at no additional cost

Condition: new, Year of construction: 2024, Flatbed laser HD-F 3015, 15 kW laser cutting system Technical Details: • Max. sheet size: 12,000 mm x 2,000 mm • Max. sheet weight: 235 kg/m² • Laser power (IPG): 15 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting range: • Steel: 40 mm • Stainless steel: 30 mm • Aluminum (AlMg3): 30 mm Equipment: IPG 15000W fiber laser source (including cooler) Compact dust extraction system (filter) Air conditioning in the control cabinet Flatbed laser with automatic pallet changer Laser cutting monitoring Automatic laser head positioning CE-compliant pallet changer with light curtain safety system Control system: SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 Bjdpfx Aogyfm Eehdslp Flatbed laser with pallet changer (automatic pallet changing system) Tube cutting device, side mounting, max. diameter 400 mm Sheet inspection (automatic sheet position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Work area lighting Multi-chamber extraction system Warning light Special laser cutting options Positioning laser diode Pierceline (piercing settings) Focusline Plasmaline Fastline Flyline Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, without additional costs

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: • (L x W x H) 9,350 mm x 2,800 mm x 2,300 mm, length including filter: 5,300 mm. Technical details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 6 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Standard equipment: Bsdpfx Aed N Rfdohdjlp • Control system: Siemens Sinumerik 840 D • Laser head: Precitec light Cutter F 125 Focus • Sheet support detection and measuring system • Positioning laser diode • Automatic sheet changer • Automatic nozzle cleaner • Central lubrication unit • Chip collection tray • Software: Lantek or Metalix CAD/CAM software with auto-nesting • Remote control: remote maintenance Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline Options include: • Tower with 10 pallet spaces • Automatic chip conveyor • Integrated camera (part tracking, micro-joints) • Air dryer • Automatic nozzle changer • Camera inside

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Blodpfsf U Spxox Ahdjp Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Manufacturer: DURMA Model: HD-FS 3015 Fiber Working area X-Y-Z: 3100x1550x125 mm Laser power: 2000 Watts Control system: Siemens Sinumerik 840D Operating hours: 15 h Sheet thickness, mild steel: 12 mm Sheet thickness, stainless steel: 6 mm Sheet thickness, aluminum: 6 mm Sheet thickness, brass: 6 mm Bodpfx Ahedx Ewgodjlp Sheet thickness, copper: 3 mm Sheet size: 3048x1524 mm Load capacity: 200 kg/m² Speeds X-Y axes: 100 m/min Speeds X-Y axes simultaneously: 141 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Installation area standard L/W/H: approx. 10000x7000x2300 mm Weight: approx. 13700 kg Standard equipment Manual single table Sinumerik 840D control system Manually focusing cutting head Precitec Procutter F125 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Chip conveyor Simple user interface, parameter page (power, speed, pressure) External CAD/CAM programming software with Autonesting, optional Metalix or Lantek Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 2000 Watt including cooler Filter, compact dust extraction Vanterm Automatic pallet changer Automatic laser head positioning Cloud license Air conditioning in the control cabinet The machine can be inspected and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. Bljdpfjcuiz Tox Ahdsp The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control Optional: positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm working area with protective glass! (Extension of the work area optionally to (180, 350 mm) almost maintenance-free

Condition: new, Year of construction: 2024, Manufacturer: DURMA Model: HD-F 3015 III Fiber Year of manufacture: Available for order (delivery time 6-8 weeks) Working area X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 25 mm Sheet thickness, stainless steel: 15 mm Sheet thickness, aluminum: 20 mm Sheet size: 3048x1524 mm Load weight: 200 kg/m² Speeds, X-Y axes: 100 m/min. Speeds, X-Y axes, simultaneous: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication system Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust collection system Vanterm Bsdpefkpamofx Ahdjlp Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer recognition and measurement Pierceline Focusline

Condition: new, Year of construction: 2024, HD-F Fiber Laser Cutting Systems Durma fiber laser cutting machines are characterized by faster cutting speeds and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting systems, you receive quality, performance, and efficiency simultaneously, which increases the value of your company. Thanks to highly precise Helis gears, very high acceleration values (28 m/s2), a high travel speed (170 m/min), and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design, and efficient and user-friendly structure. X-axis: 6000 mm Y-axis: 3000 mm Z-axis: 125 mm Max. sheet size: 6048x2024 mm Max. sheet weight: 200 kg/m2 X-axis: 100 m/min. Y-axis: 120 m/min. Synchronization: 156 m/min. Acceleration: 16 m/s2 Positioning accuracy: + 0.05 mm Reproducibility: +0.05 mm Cutting thickness Mild steel: 25 mm Stainless steel: 15 mm Aluminum: 20 mm Standard equipment Automatic pallet changer Sinumerik 840D control Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Blsdpfxjg Adu Hj Ahdsp Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust extraction Vanterm Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet layer detection, measurement The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.