Used Directional Control Valve for sale (48,102)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 952587, The weight sorter is part of a hemp hulling plant that is being dismantled. Other machines are also for sale. See the PDF document below. Dedpfxjxnvp Uo Agkocd

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, Dcodpfx Aer U Skhsgksd PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: used, Year of construction: 2023, Series 2821, machine no. 70.278, max. load capacity 2,000 kg, hydraulic lift mast, max. lift height 4,000 mm, drive power 2x 4 kW, 48 V battery, multidirectional steering system, operating terminal, type HIT-3, operator safety cabin, charger, operating hours: 197 Djdpeylllhjfx Agkjcd ++This item is part of an online auction++

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 600 kW, AEG Thyristor, AEG Thyro-A, 2A 400-495 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Dcodpsrby Uvefx Agkod Manufacturer: Amarc srl Type: 120254; 3058 Year: 2012 Dimensions: 1800 x 515 x 2130 mm Weight: 400 kg Cabinet: 400 V; 3-phase; 50 Hz; 868 A; 600 kW Power transmission system and distribution AEG Thyro-A 2A 400-495 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 495 A Cooled Power regulator Load supervision on analog outputs

Condition: new, MF-Inverter 1000Hz for resistance weldingmachines Dcjdpoyrx Nysfx Agkod HWI 2806-2816 IQ Profil + HWS 2102 IQ Profil available from stock

Condition: new, controler for resistance weldingmachines Dalex MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1 --- MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1 Dodsyrx Ntepfx Agkjcd --- MPS 300multiR1 available from stock

Condition: like new (used), controler for resistance weldingmachines Dalex and others T 8036 T 8036 S3 Dcsdpfx Aeyrx Ngogkod MPS 8043/1 MPS 8043 IQ available from stock

Condition: refurbished (used), controler for resistance weldingmachines MPS 1033 MPS 1036 MPS 15033 MPS 15036 MPS 15043 Djdpfx Aoyrx Dwogkocd T 1036 T 5036

Condition: used, Year of construction: 2001, functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 500 mm, For sale is a cycle-controlled lathe of the Gildemeister brand and type NEF 520 K The machine is fully functional, the guides are somewhat worn but still functional Technical data: Gildemeister universal lathe NEF 520K Year of manufacture: 2001 Dcsdetrmrxspfx Agkod Control: Siemens Touch Panel Rotation Ø over bed: 500mm Rotation Ø over facing slide: 290mm Face travel: 260mm Center distance: 1000mm Drive power 12 KW 1st gear stage 8 - 750 rpm 2nd gear stage 32 - 3000 rpm Quill Ø: 80mm Quill holder: MK5 Quill stroke: 180mm Three-jaw manual chuck: Ø250mm Four-jaw manual chuck: Ø250mm Tool holder: Multifix size C Fixed vice with jaws and rollers, guide Ø10 - 115 On request, loading and transport can be organized for an additional charge All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle bore: 56 mm, turning length: 1,310 mm, feed length X-axis: 280 mm, feed length Z-axis: 1,310 mm, For sale is a Richyoung RIC-TC1860 cycle-controlled lathe with an 8-station tool changer and Sauter body. This special price is valid for pickup by March 28, 2025. The machine is in very good condition and fully functional. Only one-off orders have been processed on it. The machine has been regularly cleaned and well maintained. Technical Specifications: Year of Manufacture: 2008 Control: Fagor Bed Suspension: 460 mm Swing Diameter over Cross Slide: 230 mm Center Distance: 1,500 mm Spindle Nose: D1-6 Spindle Bore: Ø 56 mm Spindle Speed: Max. 3,100 rpm X-Axis Travel: 280 mm Dedjv Tc Dtjpfx Agkocd Z-Axis Travel: 1,310 mm Spindle Motor: 5.5 kW Tool Changer: Sauter Tool Positions: 8 Tool Holder: VDI 30 Included: Chip tray, tool changer, 3-jaw chuck including 4 * 3 interchangeable jaws, live center Also Available: 2* collets, tool holder including collets, various centering centers 4* various 3-jaw chucks, various Interchangeable jaws for chucks, 8 * boring bar holders, 10 * radial tool holders on the right, 3 * drill chucks, soft boring jaws Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: like new (used), Year of construction: 2023, EMCOMAT E200 MC Year of manufacture: 2023 Condition: As-new demonstration model! Distance between centers: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: Ø 220 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Cross slide travel: 220 mm Cross slide width: 150 mm Turning tool cross-section: 20x20 mm Main spindle: Spindle mount: KK5 / DIN 55029 size 5 Spindle bore: KK5 / DIN 55029 Ø 53 / 50 mm Internal taper according to DIN 7178 1:22 Spindle diameter (front bearing): Ø 80 mm Maximum chuck diameter: Ø 200 mm Maximum faceplate diameter: Ø 260 mm Spindle speeds: 50–4000 rpm Speed control: stepless Main drive: AC three-phase motor, stepless control Power at 100%/40% duty cycle [kW]: 7.5 / 10 Maximum rated torque at main spindle: 108 Nm Feed: Feed range X/Z axis: 0–8000 mm/min Max. feed force X: 4 kN Max. feed force Z: 4 kN Ball screw X (pitch/diameter): 5 / Ø 16 mm Dcjdpfx Ajypt Irjgked Ball screw Z (pitch/diameter): 5 / Ø 32 mm Rapid traverse X/Z axis: 10 mm Tailstock: Quill diameter: 50 mm Quill taper: MK 3 Quill stroke: 120 mm

Year of construction: 2025, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. Dodpoylwhbofx Agkscd The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Year of construction: 2025, condition: new, machine/vehicle number: KVK 3 Automatik, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. Dcedpfx Ageylv Sfeked This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Philips, control rack from CNC milling machine MAHO MH 800C -PCB: 4022 224 7062 -Card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Cent Proc: 4022 226 2331 -Drive Mod.: 4022 226 3645 / 4022 226 3690 -LS/LS board: 4022 226 3680 -Inp Outp Mod: 4022 226 3531 2 pieces -Power supply: 4022 226 2270 PE 1870/03 -Individual components: see photos Dsdjq T T Nhopfx Agkecd -Price/sale: complete -Dimensions: 375/310/H340 mm -Weight: 13.4 kg

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller, PID controller -Manufacturer: Eliwell, Digital Temperature Controller PID Controller -Type: EWTR 940/h -Quantity: 1 controller available -Dimensions: 120/70/H70 mm -Weight: 0.4 kg Dedpfow A Iuuex Agkocd

Condition: like new (used), Year of construction: 2020, For Sale: Brushing Machine CR24 Manufacturer: ELDRUT SYSTEM, Kielce, Poland Model: Brushing Machine CR24 Serial Number: 9/2020 Year of Manufacture: January 2020 Dcedpswu Di Eefx Agkod Power Supply: 400V, 50 Hz Certification: CE The machine is in very good condition, ideal for industrial brushing applications. Reliable construction according to European standards.

Condition: good (used), Year of construction: 2004, For Sale: MERLIN GERIN RM6 Ring Main Unit (RMU) Brand: MERLIN GERIN (Schneider Electric) Model: RM6 Type: NE-D1D1 Year of Manufacture: 2004 Standards: DIN VDE 0670 Part 6 / IEC 298 Technical Specifications: Rated Voltage (U): 24 kV Power Frequency Withstand Voltage (Up): 125 kV Control Voltage (Ua): 230 V Rated Current (In): 630 A Rated Short-Time Withstand Current (Ith): 16 kA / 1s Short-Circuit Making Current (Ima): 40 kA Switch-Fuse Combination Current: 200 A Weight: 450 kg Dedpswu Dgqsfx Agkjcd Configuration: 1 Incoming feeder (INPUT) 1 Outgoing feeder (OUTPUT) 2 Transformer connections (TRAFO 1 & TRAFO 2) Internal earthing system and protective elements included PRICE 7,000 euro

Condition: good (used), functionality: fully functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, overall weight: 3,300 kg, Monforts KNC5-1500 Lathe in good condition for sale. The machine operates perfectly. Included accessories comprise all documentation, a quick-change toolholder, and a chip conveyor as shown in the photos. Inspection under power is gladly possible. Loading can be arranged by forklift or crane. Working area: Distance between centers: 1,580 mm Swing over bed: 500 mm Swing over cross slide: 290 mm Cross slide travel: 265 mm Top slide travel: 140 mm Bed width: 360 mm Cross slide width: 220 mm Bed slide guide length: 615 mm Turning tool shank size: 32x25 mm Spindle diameter at front bearing: 100 mm Spindle nose as per DIN 55027, Size 8 Bar capacity: 70 mm Spindle taper (metric): 80 Main drive: steplessly variable, three-phase AC motor Drive power (50/100% duty cycle): 15/11 kW Total speed range: 2-2,800 rpm Gear stage I: 2-280 rpm Gear stage II: 7-1,120 rpm Dcsdpfx Agsypbcdjkjd Gear stage III: 28-2,800 rpm Three-phase servo drive with mechanical safety clutch Rapid traverse speed longitudinal/cross: 10/5 m/min Thread cutting range: longitudinal and taper threads, pitch 0.001-500 mm Tailstock: quill diameter 80 mm Quill stroke 160 mm Internal taper MK5 Tool system: Multifix quick-change toolholder, size C Coolant system: pressure/delivery rate 0.4 bar / 10 l/min Machine dimensions (LxWxH): 3,330 x 1,550 x 1,790 mm Weight (transport unit): approx. 3,300 kg Bed: – Torsion-resistant bed, guideways hardened and ground Gearbox: 3-stage with limit switch monitoring Spindle: – Front spindle bearing: double-row cylindrical roller bearing with tapered bore combined with double-row angular contact bearing – Electric holding brake in main drive motor – Full-length cross slide with adjustable gib Longitudinal and cross feed driven by variable-speed three-phase AC motor via precision ball screw Feed and rapid traverse operated via cross selector lever Longitudinal and cross movements via electronic handwheels Increment selector switch in combination with electronic handwheel Additional contour handwheel Automatic central lubrication for guideways and ball screws Clampable top slide – Quick-change toolholder – Bedway clamping by excenter lever – Additional clamping via tension bolts for heavy workpieces – Quill adjustment by handwheel – Quill tip holder MK5 Connection voltage: 3 x 400 Volt +/-10%, 50 Hz for TN-S or TN-C networks without RCD Total connected load: 16 kVA Transistor-controlled three-phase main drive with speed monitoring If you have any questions, please feel free to contact us at any time.

Condition: used, Year of construction: 2011, Feller hot runner controller, 48-zone and 64-zone, including Harding connectors with cables. Was only used in a cleanroom environment for medical technology. Please feel free to make me a price offer! Dedpfxewqmqwj Agkecd

Condition: new, functionality: fully functional, machine/vehicle number: S.-Nr,: 20135, Brand new 24-zone hot runner controller with complete accessories. Please make me an offer! Dcodpjw N Rd Dofx Agksd

Condition: new, Year of construction: 2021, functionality: fully functional, For Sale: Bosch Rexroth Linear Module MKR-110-NN-3 (1.3 m) – BRAND NEW I am selling a brand-new, never-used Bosch Rexroth linear module MKR-110-NN-3 with a length of 1.3 meters. Dcsdexw U E Hepfx Agksd The unit is in 100% new condition and is still in its original packaging. A Neugart PLE080 planetary gearbox is included (also brand new). Specifications: Model: Bosch Rexroth MKR-110-NN-3 Total length: 1.3 m Condition: Brand new / never used Gearbox included: Neugart PLE080 Made in Germany Suitable for CNC machines, automation, robotics, precision positioning systems, industrial production lines, etc. Price: € 950 Location: Ivanka pri Nitre, Slovakia

Condition: used, Pneumatic valves from GEA, Alfa Laval, and APV (10 pallets). Approximately 150–170 pieces. Two pallets with Alfa Laval valve control heads. One pallet with unused valves. Dodpfxjyk Hlys Agkecd

Condition: used, Krauss Maffei Motherboard Dcjdpfx Agju Axihokod

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Djdpfx Ajqvuigegkscd Demag spare part panel

Condition: good (used), Year of construction: 2005, In 2022, a new control system was installed for €9,000. Djdpfx Ageyrmayskscd X-axis: 2500 Y-axis: 1018 for drilling Y-axis: 1240 for milling Z-axis: 100 Main spindle: 6.6 kW with HSK 63 interface Front tool changer: 5 positions Rear: 5 positions Drilling unit Milling unit Grooving saw