Used Disinfection for sale (92)

Condition: used, Year of construction: 2001, Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER. Manufacturer: UAT – UNIVERSAL AQUA TECHNOLOGIES, INC. – USA Model: TP-110K Year of production: 2001 Capacity: 12,000 L / h Operating hours: 9,810 Volts: 380 – Hz 50 – Ph 3 Description of equipment: -MM FILTER -INPUT WATER TREATMENT -REVERSED OSMOSIS UAT – UNIVERSAL AQUA TECHNOLOGIES, INC. USA, 2001 -DEMINERALIZED WATER TANK 12 m3 -PUMPING BLOCK FOR MINERALIZATION -MINERALIZER -MINERALIZED WATER TANK -PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Technological description of table water production:   a) General  The plant for the production of table water has a capacity of 12,000 l/h.   It consists of:  Sand filter Device for reverse osmosis (TP-110K) Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation (disinfection) of mineralized water Machine for washing and filling (polycarbonate) PC bottles.  The plant is located in one room. Automatic serving is foreseen, with all necessary blocking and regulation, due to the safety and simplicity of the process itself.   b) Raw water supply Rjdpfx Aaovgul Aszon Tap water is supplied to the room where the water preparation plant is located. From the supply pipe through the inlet water valve, the water passes through the multi-layer sand filter and enters the RO device through the solenoid valve.   c) Reverse osmosis After passing through the sand filter, the incoming water passes through the 5 jim filter and through the throttle valve enters the housings in which the membranes are located and where the physical process of separation (separation) of water from mineral substances in suspended and non-suspended forms.  Reverse osmosis, as a membrane separation process, removes bacteria, viruses, organic matter and salts from water. The effect of salt removal is 95-99%, which depends on the separation factor of the membrane itself, thus after the reverse osmosis process, sterile, bacteriologically correct water is obtained, which contains a small amount of salt, and the resulting the water of high quality.  The membrane is a key part of the reverse osmosis device and the efficiency of the RO process largely depends on its characteristics. In the device for reverse osmosis, reverse osmotic membranes based on a spiral coil were used, which proved to be the best in the industrial application of this highly efficient process. The water is forced over the membrane, the part that passes through the membrane is called permeate, and the part that contains everything that the membrane retained is called concentrate (retentate), which is discharged into the sewer as waste water.

Condition: like new (used), Serial: 26557-PO1 Rjdpfx Aaohxyq Eszon Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

Condition: used, Year of construction: 2004, Plant for rinsing and chemical regeneration of a beer post-filtration. Additional title: cleaning system for secondary beer filtration Rodpjw Tmrfofx Aazon Volume caustic vessel: 600 l Volume disinfektion vessel: 1000 l Volume water vessel: 1000 l Length: 0,90 m Height: 1,95 m Weight: 200 kg Operation / Control: Simatic OP7 Material: caustic vessel: 1.4401; disinfection/water: 1.4301 Base construction: part for caustic: on frame with 4 dome feet; disinfection/water: on frame with 6 dome feet Features: part for caustic: caustic vessel, thermometer, heating coil, dosing vessel, conductivity measuring device, centrifugal pump disinfection/water: disinfection vessel, water vessel, Hilge Hygia II centrifugal pump: 4 kW, 20 m³/h Periphery: control cabinet with Simatic OP7 touchpad

Condition: used, Cold area with an annual capacity of 1,000 to 3,000 hl, consisting of 1 fermentation vat: Kaspar Schulz, 13.43 hl, year of construction: 2000 2 fermentation tanks: 1 x Kaspar Schulz, 24.22 hl, year of construction: 2000 1 x Kaspar Schulz, 42.19 hl, year of construction: 2000 4 storage tanks: 4 x Kaspar Schulz, 21.5 hl, year of construction: 2000 6 bright beer tanks: 6 x Kaspar Schulz, 11.22 hl, 3 bar, year of construction: 2000/2001 2 centrifugal pumps: 1 x Hilge, mobile, 15 m3/h, 2.7 bar, year of construction: 2000 1 x Hilge, mobile, 15 m3/h, 2.5 bar, year of construction: 2013 1 desi tank, 1 x cylindrical stainless steel tank on feet with side outlet, year of construction: 2000 with pipework and switch cabinet for automatic cooling system. Additional title: with centrifugal pumps and disinfection tub Rsdpfx Aaew Td Dlozjn Features: Fermentation vat, 2 x fermentation tank, 4 x storage tank, 6 x pressure tank, 2 x centrifugal pump, 1 x desi tank, pipework and control cabinet for refrigeration control

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. Rsdpjfyiqbsfx Aazen The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application.

Condition: like new (used), functionality: fully functional, fuel: electricity, Year of construction: 2020, operating hours: 50 h, 100% Electric waste vacuum cleaner Aria 240Super Used machine with 240 liter collection container. Redpjrgar Eofx Aazon Ideal for industry, residential areas, municipalities and service providers. The cleaning of public places and areas is becoming more and more complex due to higher demands on municipalities, cities and service providers. The higher standards are in place to increase the well-being of citizens, make cities more attractive for tourists and ensure safety. At the same time, the environmental impact should be reduced and resources conserved. The ARIA is a 100% electric waste vacuum cleaner for the collection of industrial and municipal waste. Cleaning with the ARIA is much more effective than with conventional manual cleaning tools, so even larger waste such as PET drinks bottles and dog excrement can be easily sucked up thanks to the boost function. With the ARIA 240 SUPER, vacuuming is also made easier with an auxiliary arm that prevents the suction hose from kinking. To prevent odors and dust, the ARIA is equipped with two spray nozzles, one at the back of the container and the other at the front of the suction pipe. Outstanding performance. Features: 120 mm suction hose with carbon suction pipe 30 liter disinfection/water tank Electric drive Ergonomic joystick with power boost function Storage compartment for locking Four wheels of equal size to prevent tipping over on steps and uneven ground. The device can also be used on grass and off-road. 4x maintenance-free GEL batteries 1x onboard charger

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary - washing, disinfection, mixing and rinsing possible in one machine - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance Rsdpfsnl Dzxex Aazjn TECHNICAL DETAILS capacity: 1800 kg/h inlet height: 1103 mm Outlet height: 771 mm Water tank: 785 l Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg

Condition: excellent (used), total height: 1,600 mm, total width: 900 mm, total length: 3,800 mm, Water treatment plant Used goods, good condition, see pictures length 380 cm width 90 cm Height 160 cm consisting of: Grundfoss pump 6 m³/h at 135.1 m height, Grundfoss 6 m³/h pump at 140.2 m height, Grundfoss 6 m³/h pump at 64.4 m height, filter, UV-C disinfection unit and various controls Negotiated price: € 2.500,-- net ex stock Rjdpjtwzw Defx Aazjn Goods are in stock. Transportation and installation possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve Rodpjupxupjfx Aazen • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) Rodod Iiprspfx Aazon • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: Rodpfxsfgyico Aazsn *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material Rodpjfg E Hlofx Aazon 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit Redpfod Iip Aex Aazsn • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel Redjupw R Aspfx Aazjn • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm Rsdpfxjd Iipms Aazen total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed Redpfxjd Iipzo Aazjn with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: used, mileage: 1,12,500 km, power: 162 kW (220.26 HP), first registration: 06/2022, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, total width: 2,050 mm, total height: 3,050 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), For sale here is a well-maintained MAN TGL 8.210 skip loader equipped with the globally popular 4.6-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 6d * VAT deductible Equipment: * Meiller skip loader system * Automatic transmission * Air conditioning * Pintle hitch * Truck registration * On-board computer * Electrically adjustable exterior mirrors * Central locking * 3 seats * And much more… Technical data: Permissible total weight: 7,490 kg * Unladen weight: 4,800 kg * Payload: 2,690 kg * Towing capacity: 11,280 / 3,500 kg Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your used vehicle at fair conditions * Transit number plates (5-day / export registration) usually available the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and delivered hygienically clean! Special features: Interior and ventilation system disinfection with ozone treatment 2-stage exterior polish * Paint correction and smart repair if necessary All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters, and other requirements that you shouldn't need to worry about. Optionally, we can present the vehicle at an independent inspection station or a workshop of your choice. We look forward to having aroused your interest and are available around the clock for you. Rjdpfx Aexnvh Roazen If you have any questions, comments, or specific requests, please do not hesitate to contact us! Further information and insights into our company philosophy can be found at

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 Rjdpfxsrxuv Aj Aazen bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg

Condition: used, mileage: 2,28,500 km, power: 140 kW (190.35 HP), first registration: 04/2017, fuel type: diesel, overall weight: 4,600 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total width: 2,250 mm, total height: 2,800 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 519 WAS Case new original Mercedes AT engine / gearbox overhauled the entire vehicle is completely overhauled and looks like new 5 pieces in stock sticker on request warranty up to 36 months possible very very good condition ready for immediate use / vehicle is reconditioned no dents or scratches / stretcher possible for an extra charge / ABS + ASR, ESP / 2x airbag / electric exterior mirrors / electric windows / 2x battery 12 V 88 AH / engine preheating / auxiliary heating / power steering / stabilizer reinforced / tachograph / air conditioning / immobilizer / rear working light, outside connection 220V / fire extinguisher / center armrest / reversing camera / reading lamp / radio pre-installation / optical signaling system / beam & front flasher acoustic signaling system. Financing or installment plan possible !!! Sold without medical and technical equipment, but can be purchased separately. Our service - for you ! * 20-40 immediately available RTW always immediately available in our house * DEKRA or TÜV SIEGEL on request * FINANCIAL SERVICE - financing - leasing or installment plan can be individually tailored to your needs * WARRANTY - up to 36 months possible at extra cost Redpfx Aaokktw Dezsn * Accident replacement vehicles in stock * Reconditioning - All vehicles are professionally prepared and reconditioned for you by our team * Further vehicle offers and service points can be found under: We look forward to your call / The G&G team is at your disposal at any time. We speak Italian - English - Polish - Spanish and can certainly help you if you are looking for a good used ambulance. This advertisement serves only as a preview of our vehicle and is not part of a sales contract. Information given on the Internet are non-binding descriptions and do not represent guaranteed characteristics. The seller is not liable for errors, input errors and data transmission errors. Subject to changes and prior sale! Our used special vehicles are checked, prepared and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or Dekra seal is as self-evident as the immediate operational readiness of all rescue vehicles. Ultrasonic disinfection of the air conditioning system in the driver and patient compartments was carried out. The vehicle is almost like new !!! We grant a warranty of 12 months on this RTW !!! can be extended to 36 months

Condition: used, mileage: 2,44,000 km, power: 140 kW (190.35 HP), first registration: 08/2017, fuel type: diesel, overall weight: 4,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 519 WAS case new original Mercedes AT engine/gearbox overhauled the entire vehicle has been completely overhauled 8 units in stock (as of stickers on request incl. Stryker Power Load stretcher mount pneumatic siren (compressed air) air suspension at the rear guarantee up to 36 months possible very very good condition, ready for immediate use / vehicle is reconditioned, no dents or scratches / stretcher available for an additional charge / ABS + ASR, ESP / 2x airbag / electric outside mirrors / electric windows / 2x battery 12 V 88 AH / engine preheating / auxiliary heating / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / work light at the rear, external connection 220V / fire extinguisher / center armrest / reversing camera / reading lamp / radio pre-installation / optical signaling system / bar & front flasher acoustic signaling system. Financing or hire purchase possible!!! Our used vehicles Special vehicles are checked, prepared and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or Dekra seal is as natural as the immediate operational readiness of all ambulances. Ultrasonic disinfection of the air conditioning in the driver and patient compartments was carried out. Vehicle is almost as good as new!!! We offer a 12-month guarantee on this ambulance!!! Can be extended to 36 months Rodolb Nw Tspfx Aazon Sold without medical and technical equipment, but can be purchased separately. Our service - for you! * 20-40 immediately available ambulances always available immediately in our house * DEKRA or TÜV SEAL on request * FINANCIAL SERVICE - Financing - leasing or hire purchase can be individually tailored to your needs * GUARANTEE - up to 36 months possible for an additional charge * Accident replacement vehicles in stock * PREPARATION - All vehicles are professionally prepared and prepared for you by our team * You can find further vehicle offers and service points at: We look forward to your call / The G&G team is available to you at any time. We speak Italian - English - Polish - Spanish and can definitely help you if you are looking for a good used ambulance. This advertisement is only a preview of our vehicle and is not part of a purchase contract. Information provided on the Internet is non-binding descriptions and does not represent guaranteed properties. The seller is not liable for errors, input errors and data transmission errors. Subject to changes and prior sale!

Year of construction: 2025, condition: new, Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm; suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films; suitable for dry nonwovens (airlaid, spunlaid); folds: max. 10 folds vertically and 4 folds horizontally; size of tissue, unfolded:L(40-220)xW(30-240)mm; Grammage wet wipe: 30-80g/m²; max. roll diameter: nonwoven: 1000mm, film: 350mm; filling range liquid: 0- 10ml; accuracy: +/- 0,5ml; max. speed of the machine in neutral: 110 single bags/minute (55 double bags); 5kW, 220V/380V; machine dimensions: L1000xW1500xH2000mm. Rjdsv Nmaqopfx Aazsn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; lid dimensions: Width max. 80mm, length max. 120mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L16273xW5404xH2350 mm; total weight: about 12000kg; power: 27kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the packaging and lid closing unit on request. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Redpov Nma Dsfx Aazen

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or W shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(70-100)xW(40-100) mm; dimensions of unfolded tissue: L(140-200)xW(140-200) mm; number of wet wipes per pack (min. to max.): 5-30 pieces; grammage wet wipe: 35-80g/m²; speed of the machine in neutral: max. 900 wipes/minute or max. 90 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 280 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 280-400 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; power: 25kW, 380V; machine dimensions: L8500xW1520xH2350 mm; weight: 5000kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Rodev Nma Rjpfx Aazon

Condition: new, Year of construction: 2025, Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles; filling with 2 to 8 filling heads and with high accuracy by anti-drip device; automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles; outfeed and collection of the bottles to a collection table or to the next production station. -Specifications: number of filling nozzles: 4 (can be customized for a surcharge); number of heads for lid positioning and capping: 1, each (can be customized for a surcharge); filling range: 30-100ml; dosing method: by piston pump; accuracy: +/- 1%; speed: max. 2000 bottles/hour, at 100ml max. 500 bottles/hour; label size: L10-350mm, W10-200mm; product contact parts are made from corrosion-resistant AISI 316 stainless steel, plastic/rubber parts are food grade. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. Rsdpfev Nlbgox Aazon Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Redpfx Aaov Nmawjzen