Used Treatment for sale (840)

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Hsdpfx Aiez Iqrnjrjw The machine is being sold as is.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Hjdpoz I Iv Rjfx Airjw Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: new, ✅ Professional parts cleaning machine RESY – buy now at a great price! Are you looking for a powerful and robust parts cleaning machine for larger batches? Then our RESY series is just the thing for you! All models are made entirely of stainless steel – including the special pump. This new development offers the highest quality and durability for industry and trade. Available in three sizes: RESY 1250 – Rotating table 1150 mm – AVAILABLE FOR IMMEDIATE DELIVERY RESY 1500 – Rotating table 1350 mm RESY 1650 – Rotating table 1500 mm (Other sizes available upon request!) Features & Benefits: ✔️ Material: Stainless steel – corrosion-resistant & durable ✔️ Rotating table: 1150 / 1350 / 1500 mm, depending on the model ✔️ Spray capacity: 500 l/min ✔️ Spray working pressure: 2x 2 Hp (RESY 1250) or 2x 2.2 Hp (RESY 1500/1650) ✔️ Heating power: 2x 7.5 kW – fast heating ✔️ Temperature control up to 60 °C ✔️ Basket capacity: 300 kg ✔️ Programming of the working time ✔️ Loading trolley included ✔️ Glass window included (for RESY 1500 & 1650) or optional (for RESY 1250) ✔️ Voltage: 380 – 400 V ✔️ Weight without liquid: 400 kg (RESY 1250/1500) or 500 kg (RESY 1650) Perfect for: – Workshops – Industrial companies – Job shops – Maintenance Other systems available from us: ✅ Immersion tank ✅ Paint stripping tank ✅ Mobile extraction systems ✅ Washing systems ✅ Powder coating oven ✅ Spray booth ✅ Extraction system + make-up air system Hjdpfj Agnx Ajx Airew ✅ Mirroring technology Delivery & Warranty: Our parts washing systems are custom-made – delivery time approx. 7 – 14 working days. Delays may occur in case of high order volume. 1 year manufacturer's warranty included! Contact: Do you have any questions or would you like a customized offer? Our support team is available for you at any time! Request now – we look forward to hearing from you!

Condition: new, Year of construction: 2026, heating capacity: 9 kW (12.24 HP), temperature: 210 °C, Forced-air chamber furnace | Various sizes & custom dimensions | Directly from the manufacturer Royal Gold Industries Kft. – Your manufacturer of industrial forced-air chamber furnaces We offer high-performance forced-air chamber furnaces for industrial applications. Thanks to the multi-point hot air circulation system, the heat is distributed evenly throughout the interior. The electronic temperature control and simple operation enable reliable operation for different thermal processes. IMPORTANT: Various sizes available! The furnaces are available in different dimensions. In addition to standard sizes, we also manufacture individual custom dimensions on request, tailored to your space requirements and production needs. Examples of possible internal dimensions (L × W × H): 1200 × 1200 × 1800 mm 2000 × 1200 × 1800 mm 3000 × 1200 × 1800 mm Other dimensions available on request Technical data – example configuration Furnace type: Forced-air chamber furnace with convection air circulation Internal dimensions: 1200 × 1200 × 1800 mm Chamber volume: 2.592 m³ Heating power: 9 kW Power supply: 380 V / 16 A Thermal insulation: 150 mm Control: conventional Door arrangement: Doors on one side Heat distribution: Multi-point hot air circulation system The technical data refers to the example configuration. Heating power, power supply and other parameters may vary depending on the furnace size and design. Your advantages Directly from the manufacturer – without intermediaries Different standard sizes and individual custom dimensions Even heat distribution through forced-air technology Electronic temperature control Robust industrial design Adaptation to your workpieces and production requirements Delivery within Europe possible Request an individual offer Do you need a forced-air furnace in a specific size or with special technical requirements? We will be happy to create a suitable offer for you. Hsdpe Afmuyjfx Airsw Contact Royal Gold Industries Kft. with your desired internal dimensions, the required temperature and the intended application. Royal Gold Industries Kft. Manufacturer of industrial furnaces and machinery Directly from the manufacturer – individual solutions for your production. Directly from the manufacturer – individual solutions for your production.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MF01/2012, METRON AIR heated spray booth / extraction booth for sale For sale is a METRON AIR spray booth/extraction booth manufactured in 2012, with a heated drying function. It can be used for extracting and filtering paint mist during painting operations, as well as for drying and curing the workpiece. Key technical specifications: Dimensions: 3.6 × 4.0 × 2.8 m Inflow air volume: 14,000 m³/h Extraction air volume: 14,000 m³/h Hedpfx Aio Ab Huxjrow Power supply: 400 V, 32 A, 50 Hz Fan motor power: 4.0 kW Riello Gulliver BS 3 burner head, with a maximum burner and heat exchanger output of 120 kW Painting phase: approximately 25 °C; drying phase: 60 °C Dry dust separator, EU3 filter system 85–90% air recirculation in drying mode The machine manual and the 2023 fire safety compliance test report for the METRON Air series are available.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available Hjdsz Smqdepfx Airjw - Collection in person possible

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: 44.772, Item description Diameter x inlet length (BL): approx. ⌀ 1930 x 3600 mm Loading length: approx. 3600 mm Loading diameter: approx. 1800 mm Operating pressure: 14 bar Operating temperature: 150 °C Transport trolley, dimensions: approx. 1780 x 1200 mm Approximately 20 shopping carts are still available. Hodpfx Aij Af Ikxsrew Volume: 14,100 l PS: 14.5 bar, PT: 21.5 bar 400 V Operating hours of the fan: 15,531 h Cooling system: LAND, year of manufacture 2007 Weight: 5600 kg

Condition: new, Year of construction: 2026, STAINLESS STEEL V2A DEPAINTING TANKS – DIRECTLY FROM THE MANUFACTURER Royal Gold Industries Kft – Industrial Technology Professional depainting tanks for daily industrial use – robustly constructed, precisely controllable, and fully CE-certified. Designed for companies that value quality and process reliability. Directly from the manufacturer. --- TECHNICAL DATA – STANDARD MODEL Working dimensions (internal): 1,000 x 700 x 700 mm External dimensions: 1,250 x 950 x 950 mm Material: Stainless steel V2A Capacity: 550 liters Weight: 250 kg Heating power: 5 kW industrial heating elements Temperature control: Digital with temperature limiter (0 – 110 °C) Control cabinet: Permanently installed or prepared for wall mounting Certification: CE-certified, DIN 9001, control box with RCD protection - Without basket: €5,699 - With basket: €6,599 --- FEATURES & QUALITY CHARACTERISTICS - High-quality industrial electronics for maximum process stability - High-quality stainless steel hinges for secure and durable lid closure - Special dampers for comfortable opening and closing of the lid - Drain via stainless steel ball valve – easy to maintain and reliable - Deflector on the lid for safely guiding chemicals back into the tank - Adjustable feet for secure positioning on uneven surfaces - Oxygen-resistant seals (available at an extra charge) --- AVAILABLE SIZES Hodpfx Ao Agnxqeirsw ★ Cold depainting tank, working dimensions (L x W x H): 640 x 340 mm, for one rim ★ Working dimensions 1,000 x 700 x 700 mm / External dimensions 1,250 x 950 x 950 mm / 550 liters / 5 kW (Standard model) ★ Working dimensions 1,200 x 700 x 700 mm / External dimensions 1,450 x 950 x 950 mm / 660 liters / 5 kW ★ Working dimensions 1,250 x 800 x 800 mm / External dimensions 1,500 x 1,000 x 1,000 mm / 800 liters / 5 or 10 kW ★ Working dimensions 2,000 x 700 x 700 mm / External dimensions 2,250 x 900 x 900 mm / 980 liters / 10 kW ✅ Special sizes and prices available upon request, with and without a basket. --- CHEMICALS & ACCESSORIES – EVERYTHING FROM A SINGLE SOURCE In addition to our depainting tanks, we offer you the complete range of depainting agents – directly from the manufacturer: - Hot stripping agents – direct sourcing from the chemical industry, highly effective for demanding coatings - In-house cold stripping agent – developed and tested by Royal Gold Industries, optimally tailored to our tanks - Cold depainting tanks – available in various sizes, ideal for temperature-sensitive workpieces --- COMPLETE SOLUTIONS FOR YOUR BUSINESS Upon request, we also supply suitable accessories for a smooth workflow: - Draining tanks – for clean and safe draining of workpieces immediately after the depainting process - Washing stations – individually configurable, for the professional cleaning of parts and tools directly at the workplace Please contact us – we will find the right solution for your individual needs. For more information, you can reach us directly by email. --- Everything from a single source – directly from the manufacturer. Royal Gold Industries Kft – Your partner for professional depainting technology.

Condition: excellent (used), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, Manufacturer: Spaleck Oberflächentechnik Model: Z1 Year of manufacture: 2024 Used, like new condition Operating hours: 6 h Technical data according to the manufacturer: Working container volume: 11 l Usable volume: 7 l Turntable speed: approx. 280 rpm Drive power: 0.75 kW Height of working container: 1,000 mm Operating voltage: 400 V, 50 Hz Hsdpfx Aisz H Rfxerew Dimensions (W x D x H): approx. 530 x 950 x 1,350 mm The system has been dismantled and is stored at our facility. An inspection is possible by appointment.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: QuickTOCultra, Manufacturer: LAR Type: QuickTOCultra Hjdpfx Ajv N U Tljirsw Description: TOC analyzer Technical specifications: Measurement parameters: TOC (Total Organic Carbon), DOC, TIC, TC Measurement principle: High-temperature combustion (HTC) at 1,200°C – no wet chemical reagents required Measurement ranges: 0.1 ppb to 20,000 ppm (depending on configuration) Complies with standards: EN 1484, ISO 8245, EPA 415.3 Applications: Drinking water, process water, wastewater, ultrapure water (USP/Ph.Eur.), pharmaceuticals, chemicals Sampling: continuous online operation Interfaces: 4–20 mA output, RS-232, Modbus (depending on configuration) Power supply: 230 V AC, 50/60 Hz

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Hedezt Sb Djpfx Airjw Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: used, Year of construction: 2022, functionality: fully functional, Complete set of equipment for foam production and converting – HYMA and supplementary equipment Offer description For sale is a comprehensive set of machines and equipment for the production, processing, and converting of foams, including equipment for foaming, granulation, storage, sheeting, processing of cylindrical blocks, and precision cutting. The offer includes machines from renowned manufacturers, including HYMA, as well as auxiliary and installation equipment. The set allows for the implementation of many stages of the technological process – from foaming and material processing to its treatment and cutting. Most of the equipment dates from 2021–2022. The offer also includes an unused steam generator and an unused prepolymer tank. 1. Equipment for production and material preparation 1.1 HYMA BFH-15 foaming line (2021) Three foaming stations: Hjdo Agwbaopfx Airjw - two stations for rectangular blocks with dimensions 2080 × 1080 mm and 2080 × 1580 mm, - one station for cylindrical blocks with a diameter of 1400 mm and a maximum height of 2100 mm. Two-screw mixer with a volume of 15 m³. Maximum foam density: 300 kg/m³. 1.2 HYMA GMK-80 granulator (2021) Main motor power: 55 kW. Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 1000 kg/h with a 25 mm screen. Conveyor fan: 15 kW. Loading belt conveyor: 1 kW. 1.3 HYMA GMP-75 granulator (2021): Motor power: 75 HP (approx. 55 kW). Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 500 kg/h. 1.4 HYMA GFH-330/7 silo (2021) Capacity: 45 m³. Height: 5300 mm. Diameter: 3300 mm. 2. Equipment for sheeting and processing of foam blocks 2.1 HYMA SSB precision sheeting machine for single blocks (2021) Maximum sheeting height: 105 cm. Maximum foam density: 250 kg/m³. HYMA SCH-700 carousel sheeting machine (2021) 2.2 Carousel structure for sheeting foam blocks. Table diameter: 7000 mm. 2.3 HYMA RH drilling machine for cylindrical blocks (2021) Equipment for drilling cylindrical foam blocks. 2.4 HYMA RSS-220 machine for trimming cylindrical blocks (2021) Equipment for trimming and processing cylindrical foam blocks. 3. PTV WJ2116-1Z-Dynamite CNC waterjet cutter (2022) Cutting with a pure water jet, without the addition of abrasive material. "Dry" work tank. Interchangeable tables. Working area: 2100 × 1600 mm. 4. Auxiliary and installation equipment 4.1 CERTUSS Universal 850 TC steam generator (2022) Nominal steam output: approx. 850 kg/h. Thermal power: approx. 558 kW. Includes a water treatment station. Status: unused. 4.2 Prepolymer tank (2022) Nominal capacity: 20 m³. Status: unused. Summary The offer includes 11 items of equipment and production equipment, intended for use in a plant that manufactures and processes foams. The set may be of interest to manufacturers planning to expand existing production capacity, start a new plant, or acquire equipment for subsequent stages of the technological process. Year of equipment production: 2021–2022. Sale: preferably as a complete equipment package. The possibility of purchasing individual equipment requires agreement with the seller. Detailed information regarding the technical condition, availability, location, and terms of sale will be provided to interested buyers.

Condition: good (used), Year of construction: 2005, PureWaterPlant / Pharmaceutical water treatment plant Make: LETZNER Hedpfx Aiomfnv Ssrjw 400 ltr. / h with tank, piping, control box, etc. with operating instructions, etc.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Reverse osmosis plant. Inlet pressure: 3 bar. Capacity: 4 m³/h. Power: 34 kW. Maximum pressure: 55 bar. Equipped with Grundfos pumps, frame, stainless-steel piping, pretreatment system, tanks and control panel. Serial No.: 2005118. Hodezvchaopfx Airew

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Hjdpfx Aiszmap Norow Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Year of construction: 2016, condition: excellent (used), Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage. Hsdpfx Asw Dykweirjw

Condition: used, High-capacity industrial water treatment, filtration, and pressure boosting plant. This comprehensive system is composed of premium-tier components, primarily powered by high-efficiency Grundfos pumping stations and modular multi-port filtration vessels.The system is suited for manufacturing facilities, municipal water networks, food & beverage industries, closed-loop cooling systems, or large commercial properties. The Package Includes: 1. High-Pressure Vertical Multistage Pumps:Grundfos CR15-12 A-F-A-E-HQQE (Quantity: 1 units) Hodpfx Ajz Ahh Sjirow 2. End-Suction Centrifugal Pumps:Grundfos NBE40-160/158 A-F2-A-BQQE ((Quantity: 4 units on the pallet) 3. Filtration & Water Softening Unit:Multi-cylinder battery consisting of large blue composite pressure vessels (FRP tanks) for media filtration, iron removal, or water softening. 4. 2 units x Grundfos (Vertical Multistage Pumps). Condition: Used, as shown on photos. Stored in a dry indoor facility.

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Hsdpfx Ajz E Rv Ujirsw Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Hodpszbib Sofx Airsw Otherwise, the overall condition of the system corresponds to its original delivery condition. The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. Hedpszi N Dhsfx Airjw This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Key Features: Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. Hjdpfx Aijy A Trlsrsw If you have any questions, please feel free to contact me.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: Hedpjyr H Ansfx Airew SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: good (used), Year of construction: 2012, functionality: fully functional, Aerzen Delta Hybrid D75L Rotary Lobe Compressor Hedpsyxnwhsfx Airow

Condition: used, Year of construction: 2019, operating hours: 100 h, heating capacity: 12 kW (16.32 HP), total width: 700 mm, total length: 1,300 mm, total height: 600 mm, overall weight: 500 kg, Cleaning System Manufacturer: MFP - FTW Type: Conditioning tank - Size 2 Year of manufacture: 2019 Technical data: - Heating capacity: 12 kW - Temperature range: 30 - 90 °C - Dimensions (length/width/height): 1,300 x 700 x 600 mm - Max. load weight (mesh box): 800 kg - Operating hours: approx. 100 h - Overall dimensions: L x W x H 1.5 x 1.5 x 1.5 m - Weight: 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Hsdpfezbvhfsx Airsw Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2012, Offered for sale is a laboratory ultrapure water system with an external filter unit. Power consumption: 80W. Operating voltage: 24V. Equipped with an external filter housing, pressure gauge and hoses. Inspection possible by arrangement. Hjdpe Ad Npqjfx Airow