Used Divider for sale (1,008)

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel dividing saw 1x Compact label printer 1x "eye-M EVO" control console 1x Human-Machine Interface (HMI) software MAESTRO ACTIVE 1x Maestro pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance mobile air cushion table - 2500x600 mm, with infeed rollers 1x Double-sided automatic lateral aligner with motor drive 1x Foot switch for START/STOP of the work cycle 1x Set-up for grooving with height adjustment of the saw blade via the control system 1x "Autosetting" device on the saw carriage for cutting length/width 1x Main saw blade motor 25 hp (18 kW) 50 Hz with star-delta starter 1x Quick clamping of the saw blades with mechanical flanges "AKE" Bjdpfx Ansxlvktedodi 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collet 4x Additional collet with single finger 1x Compact Office label printer 1x Cut editor 1x Maestro optiwise - Advanced - N. 1 license 1x Maestro connect: Service agreement for 1 year (including "plug&play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: German 1x SPEC01 Special version 01 1x European safety regulations (CE marking) incl. 123 hours of on-site commissioning (within Germany) (daily working hours are 8 hours including travel time). incl. 1 day online training MAESTRO OPTIWISE PRO (as needed) incl. MAESTRO CONNECT 1 year incl. MAESTRO PATTERN IMPORT (255€ free of charge)!!! FULL MANUFACTURER'S WARRANTY IN THE FIRST YEAR!!! Due to customer insolvency, offered for sale at a reduced price. Location:

Condition: good (used), functionality: fully functional, used dough divider rounder Record Erika Automat Classic Q2 30 tlg, checked, with moulding plates, for 30 pieces, weight range from 25 to 120 g, machine no. A110311, 1.5 kW, 3,8 A, 380 V, 50 Hz Bjdpfx Aney I A Rnsdjdi

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit Bdjdpfxozuyxms Andei max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Bjde Ahkyaspfx Andsdi Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WALTER TYPE: TANIH320EVO Bedpfxjyllx Ij Andjdi Year of manufacture: 2014 Faceplate diameter: 500 mm

Condition: good (used), Year of construction: 2002, Eberhardt Piccolo 4 semi-automatic bun divider Bdjdpfsznwlwsx Andei - used - year of manufacture: 2002 - good technical condition - weight range: 40-140 g - power supply: 400 V - 2 working trays - machine from production - price on request

Condition: like new (used), Year of construction: 2023, functionality: fully functional, warranty duration: 6 months, total width: 620 mm, total length: 740 mm, total height: 1,960 mm, empty load weight: 75 kg, ejection height: 896 mm, overall weight: 75 kg, Dough Divider Manotrad TOP Model: SDB-20B Bdedpfx Aoy Ik D Asndoi Dough divider for traditional artisanal products For exceptional bread and pastry quality Robust dough divider for flexible use Pressing plate, cutting grid, and stamping grid are easily replaceable Manual dividing and shaping of the dough For both direct processing and long fermentation Pull-out holder for the dough tray Space-saving device No power connection required, maintenance-free Standard equipment: Includes: 1 cutting grid, 1 stamping grid, 1 dough tray, 1 flour container, 2 silicone mats With warranty Quality from a specialized company! Benefit from over 35 years of experience! Visit our large bakery machinery exhibition!

Condition: used, Year of construction: 2026, Dough divider Altuntas AD-2400 Standard version: 50 kg hopper with safety cover Weight ranges: 100-600 g or 300-1700 g Weight adjustment via hand crank Metering piston made of food-safe plastic Hourly output: 2,400 pieces (for lower hourly output, an optional frequency converter must be ordered) Belt scraper at the discharge/end of the belt, runs in conjunction with the belt Felt belt with drag net Multi-directional swivel casters with locking mechanism Lubrication of the metering piston at the front and rear of the discharge --> Suitable for working with soft dough and prevents sticking at the dough discharge / This extends the service life of the machine Side doors with quick-release fastener Bjdpfx Ansz A Snmedodi Optional equipment: Large dough hopper (up to 250 kg depending on requirements) Hopper guard in cable design or retractable cover Automatic hopper lubrication Frequency converter (for adjustable belt speed) Motorized weight adjustment Touchscreen control Pneumatic dough scraper (for very soft/sticky or small dough pieces) Double-piece function Special requests upon request We will gladly advise you on configuring your new dough divider!

Condition: refurbished (used), Year of construction: 1996, WP Parta U dough divider 1 or 2-pocket weight range 1-pocket 300 - 2800 grams weight range 2-pocket 110 - 1250 grams capacity 1230-2840 pcs/h frequency controlled Bdedpeytrm Usfx Andsi year of build 1996

Condition: used, Year of construction: 2011, Panel dividing saw Bdedpozuyxysfx Andei Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), 740 USED Record roll and doughnut divider and rounder. EXTERNAL DIMENSIONS (in cm): - Width 55, - Depth 70, - Height 190 (including lever) TECHNICAL DATA: - Dough weight 30-85 g - Number of products after dividing and rounding: 30 pcs. Bdodpext E Anjfx Andsi The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), 564 USED GLIMEK SD 180 - LIPPELT Bread Divider. EXTERNAL DIMENSIONS (in cm): - W: 90 - L: 156 - H: 164 - belt width: 28 TECHNICAL DATA: - power: 2.1 kW The price is a net price. Bdedpfsz Dbqgsx Andei Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: refurbished (used), Year of construction: 1998, WP Parta ST dough divider 1-pocket type 1500 Bodpfxjwgw Eqe Andedi year of build 1998 weight range 200 – 1700 grams max. capacity 1215 pcs/h

Condition: good (used), Vemag Filler & Depositor Bsdpfjz Hl Uhex Andodi Model Robot 500 Year 2016 Complete with guillotine

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication - Closed pressure beam - Film cutting device Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA Bsdpfxszuy Nle Andsdi - Motor power: 7.5 kW - Suction nozzle 300 mm - 3 collection containers, 250 l each - Integrated extinguishing system Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, functionality: fully functional, total width: 966 mm, total length: 1,184 mm, total height: 1,322 mm, empty load weight: 200 kg, input voltage: 380 V, Vertical forming machine Dough weight range: 50 to 1,200 g Maximum output: 1,200 pieces/hour 3 PETP rolling rollers Rolling adjustment via a lever Bdjdpfx Anjz Eh Afjdji Elongation adjustment via a lever Side controls on the right-hand side Lucoflex scraper blade Wool or synthetic elongation belt Quick belt change Emergency stop Mobile base with casters Power: 0.75 kW Dimensions: 966 x 1184 x 714/1322 h Weight: 200 kg Used JAC UNIC forming machine – 50 to 1200 g A vertical forming machine for dough processing The JAC UNIC is a vertical forming machine designed for professional bakers to laminate and elongate dough pieces. This configuration allows the various forming steps to be combined in a compact machine, suitable for the organization of a professional bakery. The documentation for the UNIC range indicates a working range of 50 to 1,200 g. The machine uses 3 food-grade PETP rolling rollers to gradually prepare the dough before it passes through the elongation zone. This principle is particularly suitable for forming baguettes, long loaves, and various bread formats. Why this JAC UNIC stands out The main advantage of this forming machine lies in its vertical architecture and the separation of the rolling and elongation adjustments. The large side levers allow the operator to mechanically adjust the dough processing to suit the desired product. In the model presented, the controls are located on the right-hand side. The machine also has a front chute and rests on a mobile base equipped with casters. This arrangement facilitates its positioning in the bakery while maintaining direct access to the adjustments.

Condition: used, Year of construction: 2005, - Saw motor: up to 19 kW at 2930 rpm, 50 Hz - Scoring motor: 1.5 kW at 2830 rpm, 50 Hz Panel dividing saw Manufacturer: Schelling Type: FM-H 430 Year of manufacture: 2005 Technical data Infeed speed: Forward: 0-25 m/min Reverse: 80 m/min Saw feed speed: Forward: up to 120 m/min Reverse: 120 m/min Saw motor: up to 19 kW at 2930 rpm, 50 Hz Scoring motor: 1.5 kW at 2830 rpm, 50 Hz Clamping opening: 113 mm Cutting straightness: +/- 0.1 mm over a cutting length of 3 m Dimensional accuracy: +/- 0.2 mm length, +/- 0.2 mm width, +/- 0.3 mm diagonal Main saw blade: Diameter: 450 mm Inner bore diameter: 30 mm Saw blade thickness: 4.4 mm Number of teeth: 72 Scoring blade: Diameter: 200 mm Inner bore diameter: 20 mm Saw blade thickness: 4.2 / 3.5 mm Number of teeth: 36 Edge scoring blade: Diameter: 220 mm Inner bore diameter: 20 mm Saw blade thickness: 4 / 4.8 mm Number of teeth: 2 x 24 Bdedpfxezuy Dio Andoi Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), 466 USED W&P Parta U bread divider. EXTERNAL DIMENSIONS (in cm): - W: 195 - L: 120 - H: 183 Bodpfxszxnvns Andjdi TECHNICAL DATA: - power supply: 400V 50Hz The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Bjdeyw Ivhspfx Andjdi Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: excellent (used), Year of construction: 2017, 378 USED Vemag bread divider, model Robot 500 - Filler. TECHNICAL DATA: - Weight range: 5 g - 30 kg - Capacity: 2500-2800 pcs/h depending on the weight. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Bdedpfey Szavjx Andji ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 2013, WP V500 1/2 dough divider 1 or 2 pocket developed for gentle and accurate dividing of a wide range of dough types. Suitable for wheat doughs, rye doughs containing up to 70% rye, and doughs with high water absorption. Doughs with long fermentation times and delicate doughs, with or without filling, can also be processed. year of build 2013 weight range 1 pocket 300 - 2600 grams-cap 1500 ph weight range 2 pocket 150 - 1200 grams-cap 3000 ph Dividing unit Ni-Resist with automatic oiling with 4 fixed dosing valves Voluminator Compact II Discharge conveyor cross 500 mm, with quick-lock system, scraper and catch tray Separate drive on in- and outside conveyor with drum motors Pneumatic discharge flap with plastic scraper Hopper stainless steel inside Teflon coated contents 120/180 ltr. Hopper base Teflon coated Oil catch tray underneath the machine Frequency inverter for variable speed of drive system Operation by means of touch screen Main piston Ni-Resist Automatic switch of in case of no oil Measuring pistons bronze Knife hardened steel Cover plates stainless steel, brushed, with Schmersal safety switches Bdedpfezghp Dox Andoi Frame steel, nickel coated Crankshaft and drive rods cast iron, nickel coated pictures BEFORE reconditioning

Condition: used, Year of construction: 2008, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 4,250 mm, Equipment: scorer, HOLZMA HPP 380/43/43 with automatic sheet storage system BARGSTEDT TLF 410, year of manufacture 2008. Panel dividing saw: - Cutting length 4,300 mm - Cutting width / travel of program sliding table 4,250 mm - Saw blade overhang 95 mm - Main saw motor 18 kW, scoring saw motor 2.2 kW - 7 clamping jaws, the first 3 of which are double-finger - 9 twin-track roller rails - 4 air cushion tables, 2,160 x 650 mm - Central blower with increased blower output - Pre-stacking table 4,300 x 2,200 mm - Automatic cutting height adjustment - CADmatic 4.0 with 17-inch flat display - Grooving program including turbo grooving - Labeling with part graphics and label printer PICA 104 - Data connection to storage system Bodpfx Ao Advugjndsdi BARGSTEDT TLF 410 sheet storage system: - Travel length of carriage 20.2 m - Span 8.2 m - 1 loading station and 1 unloading station - Travel drive for carriage and bridge each up to 70 m/min, frequency-controlled - Lifting drive up to 30 m/min, frequency-controlled - Program-controlled 90-degree rotary drive - Automatic detection of protective sheets with storage - Non-driven stacking roller conveyor, 3,000 mm - Ram protection for forklifts Price on request. Further information and viewings by appointment. Technical data subject to verification; subject to prior sale and errors.

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw Bodpfxjz Sm Hrs Andsdi • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: used, center height: 210 mm, with tailstock and 3-jaw chuck, 230 mm, center height 210 mm, bore 50 mm. Bedpfx Ajzw Uhbjndsdi

Condition: used, -Semi-automatic round or square dough dividers from €1,490 - Semi-automatic dough divider with square bowl, 20 divisions; price: €1,490 - Semi-automatic round dough divider, 20 divisions, brand: Lambert; price: €1,990 - Semi-automatic round dough divider, 20 divisions; price: €1,990 Bdodpfoxvyymjx Andei - Semi-automatic dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,490 - Semi-automatic square dough divider, 20 divisions, brand: PANIRECORD; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,500 - Semi-automatic round bowl dough divider, 20 divisions, brand: PANIRECORD; price: €2,500 - Semi-automatic hydraulic square dough divider JAC DIV 20, used, brand: JAC; price: €2,600 - Dough divider, 20 divisions, square DIVITRAD, brand: Bertrand Puma; price: €3,900