Used Dmg Dmc 60 H for sale (382)

Condition: new, Original accessory case for DMG CTX machines, from Horn. Gjdpfsy Ucbysx Albsiu

Condition: used, Year of construction: 2006, turning diameter 600 mm turning length 1250 mm control Siemens 840D radial face slide travel 320 mm Gjdpey I A Utefx Albeiu turning speed range 5-3.000 U/min Number of tools 8 St. total power requirement 42 kva weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6x2,15x1,95 m 1 pc. steadyrest 20 - 150 mm 1 pc. steadyrest 50 - 200 mm

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, Gisdpex Tiy Tofx Albeu coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 16,616 h, travel distance X-axis: 120 mm, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details. Gsdpfx Alsy Hhwkebsiu • Manufacturer: SAUER GmbH Ultrasonic • Component: Main Drive, 40,000 rpm • Operational mode: S1 • Speed 1: 36,000 rpm • Speed 2: 42,000 rpm • Output performance 1: 6 kW • Output performance 2: 6 kW • Torque 1: 1.7 Nm • Torque 2: 1.3 Nm • Voltage 1: 400 V • Voltage 2: 420 V • Current 1: 10 A • Current 2: 9 A • Frequency 1: 1,200 Hz • Frequency 2: 1,400 Hz • Connection: Star • Protection type: IP54 • Vibration quality: < 1 mm/s • Cooling: Water • Rotor moment of inertia: 0.000252 kg·m² • Insulation class: F • Connection diagram: 635 • Max. ambient temperature: 40 °C • Thermal protection: KTY 84-130 and PTC

Condition: used, Year of construction: 2016, machine/vehicle number: 1265000063, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 41,000 kg, DMG MORI DMU 160 P Universal Machining Center in heavy-duty portal / duoBLOCK design for 5-axis positioning and simultaneous machining. Equipped with Heidenhain TNC640 control and designed for high-precision heavy-duty machining in tool, mold, and mechanical engineering.Large working area with integrated NC rotary table and controlled B-axis milling head for complex 5-axis machining. The machine concept is designed for maximum rigidity, thermal stability, and high long-term accuracy.The machine features SK50 spindle technology, a wheel magazine with 63 tool positions, and a double gripper system. Through-spindle coolant supply and extensive measurement and process optimization systems are available.Equipment includes, among others:Oil and emulsion mist separator with mechanical filterBlow air through the spindle centerBlum Laser NT Hybrid tool measurementM&H infrared measuring probe3D quickSET package for kinematic calibrationMPC Machine Protection ControlACC Active Chatter ControlApplication Tuning Cycle (ATC)Virtual axis for Heidenhain TNC640Heidenhain HR520 electronic handwheel with display4-color signal lampSafety package in case of power failureSafety laminated glass paneMachine version as pit version with adapted chip conveyor height and operator staircaseThe virtual axis enables movement towards an inclined tool via the electronic handwheel.The machine is designed for demanding 4-/5-axis machining with high process reliability, optimized surface quality, and reduced machining times.Technical highlights:63-position wheel magazine with SK50 tool holderThrough-spindle coolant supplyIntegrated measurement and calibration systemsHeavy-duty portal design with high thermal stabilityOptimized for high-precision continuous machiningExtensive factory options and process-optimized equipmentMachine from ongoing industrial production with high-quality OEM equipment and documented factory configuration.Operating hours: approx. 19,680 h (program run: 24,564 h). Gjdpfxoy S Nhus Albeiu 5-axis machining: Yes Travel Z-axis: 1100 - mm Weight approx.: 41,000 kg Serial number: 1265000063 Travel X-axis: 1600 - mm NC rotary table: Yes Dimensions (LxWxH) approx.: 7000 x 6000 x 3500 mm Control: Heidenhain TNC 640 Travel Y-axis: 1600 - mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: excellent (used), Year of construction: 2012, operating hours: 10,168 h, functionality: fully functional, machine/vehicle number: NL254120635, CNC turning machine Gijdpey Szwhofx Albou Manufacturer: DMG MORI Type: NLX 2500 SY 700 with WH10 automation Year of manufacture: 2012 Turning diameter: 460 mm Turning length: 795 mm Control system: MORI SEIKI M730 BM Diameter over cross slide: 590/360 mm Spindle bore: 80 mm Travel distances X/Z: 260/795 mm Total power consumption: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 3.994 x 3.056 x 2.187 m

Condition: ready for operation (used), Year of construction: 2011, operating hours: 34,062 h, spindle speed (max.): 10,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 44,000 W, number of axes: 5, This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details. • Spindle type: Motor spindle without gearbox (Motorspindel ohne Getriebe) • Spindle speed ranges: • Operating mode 1: 0–10,000 rpm • Operating mode 2: 0–800 rpm • Operating mode 3: 0–5,000 rpm • Spindle performance: • 40% duty cycle: 44 kW / 288 Nm • 100% duty cycle: 32 kW / 187 Nm • Spindle hours: 34,062 h • Machine on hours: 79,252 h • Spindle: New spindle installed end of 2025 • Workpiece dimensions (max): Diameter 800 mm, height 600 mm • Feed force (X/Y/Z): 10 kN • Rapid traverse: 60 m/min • Tool magazine: Chain type (60 or 120 slots, per technical documentation) • Cooling units: Machine cooling 3.3 kW; cabinet cooling 1.0 kW • Delivery: January 2027 Additional equipment • Dual pallet changer system • Internal coolant supply (ICS) with 980 l tank and band filter • Clamping hydraulics • Infrared measuring probe Technical Specification Taper Size SK 50 Gijdpfx Aley Egbljbsu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: chip conveyor, documentation/manual, 5-AXIS MACHINING CENTER DMG MORI HSC 70, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 640 ELECTRONIC HANDWHEEL TRAVEL: X 885, Y 600, Z 450, B +20°/-110°, C, X 360° SPINDLE: 18,000 RPM, 15 KW, HSK-A63 TABLE DIAMETER: 600 MM 30-TOOL TOOL CHANGER INTERNAL COOLANT: 40 BARS Gisdoy Tv R Eopfx Albsu LASER TOOL SENSOR: BLUM PART MEASUREMENT PROBE: DMG TS649 CHIP CONVEYOR

Condition: used, Year of construction: 2011, x-travel 2600 mm y-travel 1100 mm z-travel 900 mm control Heidenhain 530 weight of the machine ca. 25050 kg Giodpfx Alsy Sbl Ssbju

Condition: good (used), Year of construction: 2007, operating hours: 24,276 h, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Centre distance: 1,250 mm Swing over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range - main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Gjdpfx Aljykbk Rebsiu Number of tool positions: 8 positions Total power requirement: 42 kVA Machine weight approx.: 5.0 t Space requirement approx.: 3.6 x 2.14 x 1.95 m Accessories: Rinsing gun, Schunk chuck 315 mm, Tailstock MK 5

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 9 kVA, torque: 82 Nm, controller manufacturer: Siemens, table width: 560 mm, table length: 900 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, overall weight: 5,200 kg, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Vertical machining center DMG MORI SLIMline Multi-Touch Control Table size: 900 x 560 mm Table load capacity: 600 kg Direct path measuring system X, Y, Z Gijdpfjw Ei E Hox Albju SK 40 spindle taper 20 bar internal coolant supply 60-position tool changer Chip conveyor Renishaw probing kit for SIEMENS control

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets Gisdpfou Ivkgsx Albsu - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: - See attached OC (order confirmation) Technical data automation: - Available, on request.

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Godpfjyxn Efsx Albeiu

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, table load: 100 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details. • Fixed table with T-slots • Clamping surface: 450 × 400 mm • Spindle interface: HSK-E32 • Spindle torque: 6 Nm (S1 100%), 7.5 Nm (S6 40%) • Automatic tool changer, pickup system • Tool magazine capacity: 24 tools (HSK-32) or 22 tools (HSK-40) • Air blow through spindle axis • Ethernet interface ready • CELOS control system with Siemens 840D sl Operate • 21.5” ERGOline touchscreen control panel • CAD/CAM connectivity • Compatible with PPS/ERP systems • 5-axis precision package • Integrated tilting rotary table • A-axis tilt range: -15° to +130° • C-axis rotary table diameter: Ø250 mm • C-axis integrated torque motor • Maximum rotary speed: 50 rpm Gjdpsyt Nxzjfx Alboiu • 4-color machine status signal lamp • Remote diagnostic capability (DMG MORI NETSERVICE) • IoT connectivity (DMG MORI IoTconnector) • Remote service monitoring (Service Agent) • Machine installation and commissioning included • 3D STEP model for CAD integration • Permanent lubricated spindle Additional equipment • Automatic pallet/part handling automation PH10 • Linear magazine automation system • Pallet capacity: up to 132 positions (ITS 50) or 66 positions (ITS 115) • Maximum workpiece height (automation): 260 mm • Machine transport lifting device • Machine packaged for truck transport

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % Godpjyt Hwzefx Albeiu • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: new, Year of construction: 2018, Chip conveyor including pump, suitable for CTV 160 Giodpfxey Amhyj Albju

Year of construction: 2014, condition: excellent (used), DMG PH 150-8 . year of construction 2014 . with pallets . Touch screen . plant in very good condition . Gijdein Dkljpfx Albou

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,71,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Godpfxjyz S T Se Albsiu

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2017, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes Giodpfxsx D Di Uj Albsu • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 15,000 rpm, spindle motor power: 46,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. • Swivel head (B-axis) • Rigid table: 3,200 x 1,100 mm (125.98 in x 43.30 in) • Rapid traverse (standard): 40 m/min (131.2 ft/min) • Acceleration (standard): 4 m/s² (13.12 ft/s²) • Tool clamping: DIN 69872 • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 9 s (SK40) • Direct measuring systems • Full-protective cabin and coolant tank Gsdpfx Aljx D Iclsboiu • S-A3070 Dynamic package for DMF 260 linear (Y 1,100 mm): • Linear drive X-axis with 80 m/min (262.48 ft/min) • Rapid traverse XYZ: 80/60/60 m/min (262.48/196.86/196.86 ft/min) • Acceleration XYZ: 5/6/6 m/s² (16.4/19.68/19.68 ft/s²) • Active chiller for main spindle and linear motor • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 7.5 s (SK40) • Motor spindle speedMASTER SK40: • Torque: 200 Nm / 130 Nm (148 ft-lbs / 96 ft-lbs) • 40% / 100% duty cycle Additional equipment • Chip conveyor (scraper type) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine can be used as a fully-fledged universal machining centre! We offer you: Manufacturer: DMG MORI Type: Lasertec 125 3D Hybrid Year of manufacture: 2019 Control: Celos with Siemens 840D sl Operate Technical specifications: Travels: X-axis: 1,335 mm Y-axis: 1,250 mm Z-axis: 900 mm Rotary range: 360° Swivel range: +/- 120° Main spindle: Max. speed - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Max. torque: 130 / 86 Nm Rotary table: Table diameter: C-axis 1,250 x 1,000 mm, integrated in fixed table 1,400 x 1,000 mm Max. table load: 2,000 kg Tool changer: Tool holder: HSK-63A Number of tool stations: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 500 mm Tool change time (chip-to-chip): 6.5 sec Feed rates: Rapid traverse: 40 m/min Laser specification: Laser type: Fibre-guided diode laser Power: 2,500 W Fibre diameter: 600 μm, NA 0.22 Wavelength: 1,030 +/- 10 nm Focal length: 200 mm Beam quality: 66 mm mrad Power stability: max +/- 2% (2h) Incl. pilot laser: 600 – 700 nm Operating hours: approx. 4,500 h Spindle hours: approx. 1,910 h Gijdpfeyz Si Tox Albou Technical features & accessories: - Automated changing of the laser processing head for laser deposition or milling operations - Production package, consisting of: - Scraper-belt chip conveyor - Coolant system, 600 l tank - Paper band filter - High-pressure coolant (IKZ) 40 bar - Chip rinsing in the work area door - Rinse gun, 3 bar - Oil and emulsion mist extraction system - Blown air cooling device through spindle centre - Infrared probe, make Renishaw PP60 optical (OMP60) - Tool measurement in the work area, make Blum Laser - Preparation for 3D quickSET - MPC – Machine Protection Control - 4-color signal lamp - Optical powder feed rate sensor - Automatic work area door - Grating footboard - Laser, consisting of: - Processing optics with focusing lens - Focal length 200 mm - Processing nozzle for 3 mm spot diameter - Water-air chiller for laser and processing head - Second collimation optic for 1.6 mm laser spot diameter - Alignment camera for laser/nozzle adjustment - incl. adaptive process control - incl. extraction system with post-filter stage - Active laser safety window - Extended powder feeder, consisting of: - Twin system (dual-channel material feed) - Material capacity (2x): 5 l, feed rate: 0.5 – 15 g/min - 2x mass flow controllers for consistent material build-up - Automatic switching or mixing via simultaneous operation of both powder containers by NC commands - Powder monitoring and laser camera - Electronic handwheel - DECKEL MAHO MDynamics package - ATC (Application Tuning Cycle) - Safety package for power failure Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Modifications and errors in technical data and details, as well as prior sale, are subject to change!

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Giedpfjyqybbex Albsu Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. spindle speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? Gjdpfx Aoxvzy Uelbeiu For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Gsdpfx Asxpg H Holbeiu Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: used, Year of construction: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l Gsdpfowtd A Nsx Albeiu - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!