Used Dmg Dmc 835 V for sale (413)

Condition: excellent (used), Year of construction: 2006, turning length: 365 mm, spindle motor power: 10 W, travel distance X-axis: 160 mm, SCHUNCK 160 mm chuck with jaws Full C-Axis 360.000 Driven Live tooling Part catcher Tooling package with 12 Tooling holders 3 x Live tooling AXIAL 3 x Live tooling RADIAL Collet device with inserts Cutting Hours 14.462 H Max. turning Ø: 380mm X-Axis: 160mm Ijdex R Szhspfx Adwoal Z-Axis: 365mm Spindle bore: 56/42mm Speedrange: 6000Rpm Spindle power: 10kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Chip conveyor: Yes Pinole taper: 4Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 3800mm Width: 1720mm Height: 1670mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Iaodpfx Adsv T Rtiewsl Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Isdpfox Hqh Sex Adwjal

Condition: used, Year of construction: 2009, x-travel 730 mm y-travel 560 mm z-travel 560 mm Control Heidenhain iTNC 530 Iodpfxox Dda Hs Adweal weight of the machine ca. 7 t

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: NL251EG1087, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, Mori Seiki NL2500Y/700 CNC Lathe – with Y-Axis – Used & Fully Refurbished, Immediately Ready for Operation The machine is in excellent condition, completely overhauled by qualified technicians and fully functional. Ideal for precision machining with Y-axis and live tooling. Main Specifications: - Year of manufacture: 2005 - CNC control: Mori Seiki MSX-850 - Max. swing diameter: 755 mm - Max. turning diameter: 356 mm - Max. turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4,000 rpm - 12-position turret - Powered tools up to 6,000 rpm - Included: 4 driven toolholders and 7 static toolholders Axes: - X-axis travel: 260 mm Isdpfx Aovw Ackedweal - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Additional Features: - Tailstock (734 mm travel, MT3 fitting) - Belt-type chip conveyor - Tool presetting system - Parts catcher ("manina") Dimensions and Weight: - Footprint: 3,100 x 1,920 x H 2,220 mm - Weight: 6,200 kg Machine supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar and standard toolholders) The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Year of construction: 2003, condition: ready for operation (used), Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible. Iedex U Dwiepfx Adwsal

Condition: good (used), Year of construction: 2010, operating hours: 54,500 h, functionality: fully functional, machine/vehicle number: 15435720734, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain 530, controller model: 530, spindle speed (max.): 14,000 rpm, operating hours of spindle: 12,000 h, Equipment: chip conveyor, Equipment DMU 70: with Erova 10-position changer Spindle 14,000 rpm Iaedpeyab Riofx Adwel Heidenhain 530 3D probe Heidenhain TS649 DMG 30 tools / SK 40 Simultaneous rotary table Barrier air Chip conveyor Handwheel Folding roof The LANG zero-point clamping system can be purchased at an additional cost.

Condition: good (used), Year of construction: 2013, 1 used tool presetter Iajdpjqzgw Aofx Adwol Manufacturer: DMG Type: Microset Vio 210 Year of manufacture: 2013 Serial no.: 99510021418 X-axis measuring range: 410 mm Z-axis measuring range: 465 mm With workbench, under-table, 1,400 mm wide, integrated telescopic drawer cabinet, 5 drawers, with 15" Terra monitor, keyboard, mouse, and Dymo 450 label printer

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 240 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 23 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, torque: 192 Nm, workpiece weight (max.): 30 kg, total height: 1,829 mm, total length: 4,066 mm, total width: 2,583 mm, collet bore: 73 mm, bar diameter (max.): 73 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CTX alpha 500 V5 from 2015 is in very neat condition and has 7,040 spindle hours on the clock. In 2020, the machine was fitted with a BMO automation, type Iridium Ir 25F, but has seen little production since then. PLEASE NOTE! The 2 panels with laser/motion sensor are not shown in the photo but are, of course, included. This CTX alpha 500 is equipped with: - BMO Iridium Ir25F automation (2020). - LNS Quick Load Servo III bar feeder (2016). - Schunk Rota THW plus powered chuck with quick-change jaw system. - Various top jaws. Iaodpfx Ajx Rqwhodwel - DMG CELOS software. - Chip conveyor. - Workpiece catcher/ejector. - Tool measurement arm. - Foot pedal for chuck clamping/unclamping. - Miscellaneous tooling (driven & static). - Original DMG documentation.

Condition: used, Year of construction: 2017, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control DMG MORI Iasdpjwm Rthefx Adwjl

Condition: excellent (used), Year of construction: 2018, Tool holder VDI 30 Tool turret with 12 stations Main spindle speed: 5,000 rpm Isdpfex Nnbhox Adweal Drive power: 16.5 kW Including bar feeder Including documentation

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" - Max. workpiece weight between centers: 100 lb - X-axis travel: 7.48" - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") Isdpfx Adex Apkzjwsal MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52

Condition: used, Year of construction: 2003, Milling machine DMG DMU 100 T, year of manufacture 2003. More technical data and additional photos available upon request. Iodpfex T A Tyjx Adweal

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Application Types Iaedpsx D H Hiefx Adwjl Milling

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0031000270A, CNC Lathe Manufacturer: DMG Model: ecoTurn 450 V3 Machine Number: 0031000270A Year of Manufacture: 2015 Control System: Siemens 840D with Shopturn Max. Turning Diameter: 400 mm Chuck Diameter: 250 mm Bar Capacity: Ø 80 mm Drive Power 100%/40% DC: 12.5 kW / 17.5 kW Speed Range: up to 4000 rpm Weight approx.: 5200 kg Equipment: Axes: X, Z, and C-axis Driven Tools: 12 driven stations Tool Turret: 12-position Sauter turret Hollow Clamping Device: Yes Tailstock: Yes Automatic Quill Stroke: Yes Chip Conveyor: Yes - Bar package + interface - Coolant spray gun 5 bar - High pressure pump 12 bar - Direct measurement system X and Z axis - Mechanical oil mist separator type AFS - Hydraulic three-jaw power chuck, type SMW BB-D 250 Through-hole 78 mm Iedpfxjx Uq U Uo Adwjal Subject to prior sale and errors excepted.

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 700 mm z-travel 550 mm Control Heidenhain TNC 530 Iodpfx Adsxiy Anjweal

Condition: excellent (used), Year of construction: 2021, Demonstration machine Iaedpox Thrzjfx Adwjl CNC control: SIEMENS 828D OP Axes Travel X-axis mm: 550 Travel Y-axis mm: 550 Travel Z-axis mm: 510 Rapid traverse m/min: 24 Work table: 850 x 650 mm Max. workpiece weight kg: 600 Spindle Max. spindle speed rpm: 12,000 Spindle drive power kW: 13/9 (40/100% duty cycle) Spindle torque Nm: 83/57 (40/100% duty cycle) Cooling Coolant supply through spindle bar: 20 Tool system Tool holder: SK40 Number of tools in magazine: 24 Max. tool diameter mm: With adjacent pockets free mm: Ø130 With adjacent pockets occupied mm: Ø80 Max. tool length mm: 300 Max. tool weight kg: 8 Equipment Electronic handwheel Chip conveyor RENISHAW probe CTS (coolant through spindle) Total power requirement kVA: 20 Main machine: Dimensions/Weight Length mm: 3,070 Width mm: 2,670 Height mm: 2,840 Weight kg: 5,600

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm Iasdpfx Ajw Dud Sjdwel 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 *

Condition: used, Year of construction: 2000, 5-axis machining center DMG DMU 50 evo, year 2000. More technical details and additional photos available on request. Iaedpfxsx T A Spe Adwsl

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 Iajdpfx Adjx D Hpwswjl This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG Deckel Maho Machining Center 5-Axis Simultaneous Type: DMU 50 EVO Linear Year: 2006 Iaedpfextqfnjx Adwol Complete Machine With Documentation CNC Heidenhain Mill Plus type Machine disconnected Ready for loading

Condition: used, Year of construction: 2004, 2 x bar machining centers, manufacturer DMG, type: DMP 60s, year of manufacture: 2004 and 2003. Further technical data and more pictures available on request. Iedpfxjx T A N Ij Adwoal

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Spindle Speed 18000 RPM Tool taper SK 40 This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. Iaodpfx Adox Rd Hpswsl Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 2 Turret Number of turrets 1 Tools Number of station 12 Iodpfjx Nr T Usx Adwsal Additional Equipment Bar package with a pick-up device and parts conveyor belt Bar guide for 1.5 metre bars and workpiece stop Hainbuch SK 65 clamping top Indicator light for machine's operating status Cooling unit for air conditioning the control cabinet OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2018, operating hours: 5,080 h, condition: ready for operation (used), General Data Machine weight 4700 kg Measurements height 1852 mm Dimensions Machine Length 1928 mm Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 16.5 kW Movement X-Axis Movement 242.5 mm Z-Axis Movement 540 mm Y-Axis Movement 80 mm Technical Specification Driven Tools yes This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine. Application Types Turning Ijdpfjx D Huasx Adwjal