Used Doosan Dx 210 W for sale (330)

Condition: used, Year of construction: 2010, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model A CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Coolant Filtration System, Spindle Chiller, Machine Weight 31,000kg. S/No. HM12500058 (2010) - CE Mark Itjdjxdbr Tjpfx Aabsn Please Note: Dismantling and Loading will be carried out by our own supplier Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,785 h, load capacity: 1,800 kg, lifting height: 6,000 mm, free lift: 2,050 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork carriage width: 970 mm, fork length: 1,200 mm, total length: 2,000 mm, drive type: Elektro, construction width: 1,050 mm, Electric 3-wheel forklift Load centre: 500 mm Fork width: 100 mm Ijdpfx Aow Saxcoabetn Fork thickness: 40 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 18x7-8 Rear tyres type: Superelastic Rear tyres size: 125/75-8 Battery voltage: 48V Battery capacity: 750Ah Battery year: 2012 Description: In addition to this Doosan model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders available in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase & financing on attractive terms are always possible for us. We are also happy to purchase your used machines outright, even if you don't buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this B18T-5. P.S.: Our master forklift workshop specialises in repairs, servicing, overhauls and custom builds for forklifts from 8 tonnes and above. We are also happy to sell your vehicle on commission in our showroom. Sideshift, Full free lift,

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,530 h, Year of manufacture: 2015 Itedsxavakepfx Aaben Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 5,435 h, load capacity: 9,000 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: duplex, construction height: 3,935 mm, power: 81 kW (110.13 HP), fork length: 2,400 mm, drive type: Diesel, Diesel forklift Iodpfswtu I Aox Aabetn Load center: 600 Mast type: Duplex Transmission: Torque converter Condition: Refurbished with warranty Technical condition: Very good Front tires type: Pneumatic Rear tires type: Pneumatic Description: Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, STVZO approval, full cab, air conditioning, LED, radio, reversing camera

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 2440 mm Measurements depth 6642 mm Measurements height 2060 mm Machine weight 11000 kg Itjdew Uahiepfx Aaben Control Unit Brand FANUC Model 32i control Main Drive Spindle speed range 2000 rpm Spindle motor power 26 kW (Gearbox) Additional Equipment Turret Positions: 10 station This DOOSAN Puma 400LB was manufactured in 2015. A robust horizontal turning machine featuring a FANUC 32i control, it has a chuck size of 381mm and a bar capacity of 117mm. The machine offers a maximum cutting diameter of 550mm and a length of 2093mm. With a 10 station turret and rapid feedrates of X x Z: 16 x 18m/minute, it's ideal for efficient machining. Contact us for further details regarding this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2023, operating hours: 1,260 h, functionality: fully functional, Doosan Puma DNM 5700 Control system: Heidenhain TNC 620 Clamping area of table: 1300x570 mm Travel X-axis: 1050 mm Travel Y-axis: 570 mm Travel Z-axis: 510 mm Spindle speed: 0 - 12,000 rpm Number of driven axes: 4 Coolant pressure: 20 bar Spindle taper: SK 40 Max. load of table: 1,000 kg Tool magazine: YES Number of magazine positions: 30 Itjdpfew Tni Eex Aabsn Machine weight: 6,500 kg Measurement probe Operating hours: 1,260 h

Condition: used, Year of construction: 2016, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model B CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Spindle Chiller, Machine Weight 31,000kg. S/No. MH0014 - 000201 (2016) - CE Mark Please Note: Dismantling and Loading will be carried out by our own supplier Ijdpfjxda D Iex Aabetn Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2018, Doosan Puma 2600M CNC Lathe Year of manufacture 2018 C axis driven tools axis travel Z 830mm X 260mm chuck 250mm Renishaw tool measuring probe maximum turning length 760mm maximum turning diameter 376mm spindle passage 76mm Isdpfxswqfk Aj Aabetn Tool head 12/24 on BMT65 Hydraulic tailstock The machine is -chip conveyor -driven holders 3 pieces -regular holders 7 pieces -parts catcher machine in super technical condition few hours

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Year of manufacture: 2022 Iedpfxexcyd Ej Aabstn Intended use: Construction Contact Miguel Cubas for further information. = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,730 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 82 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, mount diameter: 24 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 80 mm, collet bore: 80 mm, bar diameter (max.): 80 mm, CNC Turning and Milling Center Doosan Puma 2600 SYII with Fanuc i Series Control including Accessories The machine has had very little use, with approximately 1,730 spindle hours, so it is as good as new and available from 01.01.2026. Additional accessories for Doosan Puma 2600 SY II lathe: - 2 tool holders for external turning tools 25x25 - 1 double tool holder for external turning tools 25x25 - 1 tool holder for face machining 25x25 - 2 tool holders for internal turning tools (boring bars) diameter 50 mm - 1 double tool holder for internal turning tools diameter 32 mm - 1 tool holder for parting-off tools - 1 double right tool holder for external tools (sub spindle) - 1 double left tool holder for external tools (main spindle) - 4 driven tool holders ER-32 radial (X axis) - 5 driven tool holders ER-32 axial (Z axis) - 1 driven tool holder ER-32 radial (X axis) with internal coolant supply - 1 driven tool holder ER-32 axial (Z axis) with internal coolant supply - 1 three-jaw chuck for main spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 three-jaw chuck for sub spindle with 1 set of hardened jaws + 2 sets of soft jaws Itodpfoxauwbex Aabsn - 1 collet chuck for main spindle including collets for Ø50 mm and Ø30 mm - 1 collet chuck for sub spindle including collets for Ø50 mm and Ø30 mm - 1 set of reduction sleeves for Ø50 mm (10 pieces) - 1 set of reduction sleeves for Ø32 mm (7 pieces) - 1 set of adapters for driven tool holders (ER 32 collet, Weldon, milling holder) - Flushing device with coolant on main spindle for automatic jaw cleaning - Device for automatic jaw cleaning with compressed air - Additional high-pressure pump for internal coolant supply (drilling with indexable drills) - Automatic machine shut-off function (machine also switches off the main power, thus disconnecting the power supply) - Interface for automatic bar feeder magazine Iemca

Year of construction: 2005, condition: ready for operation (used), General Data Measurements width 1705 mm Measurements depth 3118 mm Measurements height 1730 mm Machine weight 4800 kg Control Unit Model FANUC 18iTB (Manual Guide i) Main Drive Spindle speed range 5000 rpm Spindle motor power 3.7 kW Number of axis 5 Workpiece Workpiece drm over bed 600 mm Turret Number of turrets 1 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment LNS Quick Load Servo Bar Feeder This 5-axis DOOSAN PUMA 2000SY was manufactured in 2005, designed for precision in horizontal turning. Ideal for complex machining tasks, it offers robust performance and reliability. Consider the opportunity to buy this DOOSAN PUMA 2000SY horizontal turning machine. Contact us for more information about this machine. Application Types Itsdpfx Aajxaqkkjben Turning

Condition: excellent (used), Year of construction: 2011, axis stroke (X,Y,Z) 742 x 435 x 510 mm Number of spindle head vertical / St. Number of spindles head horizontal / St. The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy and reliability. All technical documents for the machine are available and included. Accessories included. Control: HEIDENHAIN iTNC 530 Travel ranges X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Iodpfxjwmxflj Aabstn Max. cutting feedrate: 1~15,000 mm/min Ball screw (Diameter × Lead) X-axis: 40 × P12 mm Y-axis: 40 × P12 mm Z-axis: 40 × P10 mm Accuracy Positioning accuracy: ±0.005 mm over the full stroke Repeatability: ±0.002 mm Table size: 920 × 435 mm Min./Max. spindle-to-table distance: 150~660 mm Max. table load: 600 kgf Table surface configuration: 4-125 × 15H8 Max. workpiece height: 465 mm

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 818 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Itsdpoxcfgrofx Aabon Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 1,649 h, functionality: fully functional, machine/vehicle number: MV0108-000036, travel distance X-axis: 1,040 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, table width: 1,200 mm, table length: 520 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, CNC machining center for mass production of small parts featuring two vertical spindles (operating in parallel) TECHNICAL DETAILS Travel X-axis: 1,040 mm Travel Y-axis: 520 mm Travel Z-axis: 600 mm W-axis: 20 mm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Spindle Type: ISO #40, 7/24 Taper Torque: 117.8 Nm Spindle speed: 12,000 rpm Spindle motor power: 11 - 18.5 kW Spindle orientation: Built-in sensor Drive type: Direct drive Work table Table surface: T-slots (4-125 x 18H8) Table size: 1,200 x 520 mm Maximum workpiece height: 680 mm Maximum workpiece weight: 800 kg Distance spindle to table: 150 - 750 mm Automatic Tool Changer Tool holder: MAS403 BT 40 Number of tool stations: 2 x 30 Tool selection: Memory Random Max. tool diameter: 80 mm Max. tool diameter (with adjacent stations empty): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Max. tool tightening torque: 5.88 Nm Tool-to-tool change time: 1.7 s Chip-to-chip time: 3.5 s MACHINE DETAILS Power supply: 380 V Rated power: 60 kVA Full load current: 105 A Short-circuit capacity: 5 kA Overall height: 3,510 mm Overall length: 2,400 mm Overall width: 2,750 mm Total weight: 8,500 kg EQUIPMENT - Control: FANUC - W-axis for tool length setting Itsdpfx Aaew Ucx Reben - Distance between spindle centers: 400 mm - Two tool changers with 30 tools each - Tool holder: BIGPLUS BT 40 - High-pressure through-spindle coolant: 2 MPa and 4 kW - Tool breakage monitoring - Portable handwheel - 4th axis preparation

Condition: good (used), Year of construction: 2008, Description Turning diameter: 300 mm Turning length: 600 mm Control: FANUC, 18i-TB + dialogue Turning diameter over bed slide: 230 mm Travel X1: 165 mm Travel Z1: 700 mm Travel X2: 190 mm Travel Z2: 720 mm Travel -Y axis: +/- 50 mm Main spindle bore: 76 mm Main spindle speed: 5,000 rpm Main spindle drive: 22 kW Max. spindle torque: 208 Nm Sub-spindle bore: 76 mm Sub-spindle speed: 5,000 rpm Sub-spindle drive: 22 kW Max. spindle torque (sub-spindle): 208 Nm Tool turret: 2 x 12 stations Number of driven tool stations: 2 x 12 Driven tool speed: 5,000 rpm Max. torque (driven tools): 47 Nm Workpiece power: 5.5 kW Iodpfxow Av Szs Aabotn C-axis resolution: 0.001° Rapid traverse X + Z axis: 20 / 40 m/min Rapid traverse Y axis: 7.5 m/min Total power requirement: 68.4 kVA Machine weight approx.: 7.8 t Machine dimensions (L x W x H): 3.91 x 2.07 x 2.08 m

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 30 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 2500 x 950 x 850 [mm] - Rapid traverses rates (X/Y/Z) : 16 / 16 / 16 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 2500 x 950 [mm] - Maximum weight upon table : 3500 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 54.2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 6.480 x 4.315 [mm] - Machine height : 3.595 [mm] - Machine weight : 23.000 [kg] MACHINE HOURS - Number of working hours : 5.190 [h] EQUIPMENT - CNC : Fanuc i Series - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump - Spindle cooling unit Ijdpfx Aaoxbh S Usbetn - Chips conveyor - Tool probe - Workpiece probe : Renishaw - Oil mist extractor - Electric transformer

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 12500 kg Media Chip conveyor Yes This DOOSAN VT 900 was manufactured in 2007. It's a vertical turning machine featuring a CNC FANUC Oi-TC, a chuck diameter of 630 mm, and a conveyor. Weighing 12500 Kg, it also meets CE standards. Consider the opportunity to buy this DOOSAN VT 900 vertical turning machine. Contact us for more information. Application Types Itodjw H Twhepfx Aabjn Turning

Condition: used, Year of construction: 2023, operating hours: 1 h, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Serial number: 20220914015 Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Itedpjxbwvcjfx Aaben Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 1.010 kVA Frequency: 50 Iodpfx Aasxcfglobstn Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: excellent (used), Year of construction: 2022, 2022 Doosan BVM 5700 CNC Vertical Machining Centre With Doosan-Fanuc I Series Plus Control Isdpjxc Hzwsfx Aabotn Table Dimension 1,300 x 570mm (4 'T' Slots). Maximum Table Load 1,000kg. Axis Travel 'X'=1,050mm, 'Y'=570mm, 'Z'=460mm. Distance From Table Surface To Spindle Nose 150-610mm. Rapid Traverse 'X'=42m/min, 'Y'=42m/min, 'Z'=36m/min. Maximum Spindle Speed 15,000rpm (37kW Motor). Spindle Taper BT40. 30 Position ATC. Maximum Tool Ø80mm (Ø125mm Non Adjacent Pockets), Maximum Tool Length 300mm, Maximum Tool Weight 8kg. S/No. MV0156-000047. With 20 Bar Through Coolant System, Twin Auger To LNS Turbo MH500 Chip Conveyor, Renishaw Spindle Probe Interface, Hydtec-Kouwa Hydcool Oil Cooler, Filtermist FX6002 Mist Extraction Unit, Signal Tower, Oil Skimmer, Wash Gun, Handwheel & Manuals. Overall Dimensions W3,080 x D2,560 x H2,890mm. Weight 7,500kg. Note: Tooling, Spindle Probe, Microloc Table & Nikken 4th Axis Unit Not Included.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, CNC-Turning and Milling Centre - Horizontal / Brand: DOOSAN Type: PUMA 5100 XLYB / Year of construction: 02/2022 (Start-up: 07/2022) Universally applicable, highly stable, horizontal turning centre with high performance. For heavy-duty machining of medium and large parts. Operating hours (August 1st, 2025): 592 h Condition: As new / ready for immediate use. The machine can be inspected by appointment under power. TECHNICAL DATA: - Swing over bed: 880 mm - Swing over saddle: 817 mm - Recom. turning diameter: 380 mm - Max. turning diameter: 550 mm - Max. turning length: 3.040 mm Capacity: - Chuck size: 533 mm - Chuck work weight (incl. chuck): 1.400 kg - Shaft work weight (incl. chuck): 5.700 kg - Bar working diameter: 165,5 mm Power source: - Electric power supply (rated capacity): 68,79 kVA Machine dimensions: - Length: 7.303 mm - Width: 2.632 mm - Height: 2.937 mm - Weight: 16 tons EQUIPMENT: - CNC-Control: FANUC i PLUS - Steady rest, Brand: SMW-Autoblok - Tailstock, MK5 - Tool magazine - Chip conveyor (hinged belt) - Flushing gun - Documentation - CE marking A wide range of additional accessories can be additionally purchased. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Itjdpfxew Hg Ris Aabjn Detailed technical data sheet and information on equipment available on request.

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Can be tested. Itodpfx Aajvri I Asbon No warranty of any kind. Data subject to error. Sale reserved until deposit is received.

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 Z-Axis Movement 2033 Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets Control Unit Brand FANUC Movement X-Axis Movement 578 Z-Axis Movement 2033 Itedpfew U E Tkex Aabsn Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 3600 mm Measurements height 2200 mm Machine weight 6450 kg Control Unit Brand FANUC Model na Main Drive Spindle speed range 3500 rpm Number of axis 5 Movement X-Axis Movement 260 mm Y-Axis Movement 102 mm Z-Axis Movement 830 mm Turret Number of turrets 1 Number of tool slots 24 Rotating tools Yes This 5-axis DOOSAN 2600 SY turn-mill centre was manufactured in 2015. It features a Fanuc CNC, a maximum turning diameter of 375 mm, and lengths up to 760 mm. The machine includes a motorized turret with 24 positions and motorized tools capable of 5,000 rpm. Ideal for complex machining tasks. Consider the opportunity to buy this DOOSAN 2600 SY turn-mill centre. Contact us for more information about this machine. Isdpjw A Tkzefx Aabjtn Application Types Turning

Year of construction: 2017, operating hours: 7,640 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Number of spindles 2 Spindle speed range 4500 rpm Movement X-Axis Movement 205 Y-Axis Movement 105 Y-Axis Working Feed +/- 52.5 mm Z-Axis Movement 560 mm B-Axis Movement 560 mm Media Chip conveyor Yes Additional Equipment Tool setter Parts Catcher Belt type chip conveyor Parts conveyor Oil skimmer Mist extractor/filter High pressure coolant pump Iodpfxswvm H Ao Aabstn This DOOSAN LYNX 220 LSYC horizontal turning machine was manufactured in 2017. It features a SIEMENS SINUMERIK 828D controller, dual spindles with speeds up to 4500 and 6000 rpm, and a chuck capacity of 210mm and 135mm. Additional features include a parts catcher, belt type chip conveyor, and a high-pressure coolant pump. If you are looking to get high-quality turning capabilities consider the DOOSAN LYNX 220 LSYC machine we have for sale. Contact us for more information. Application Types Turning