Used Dosage for sale (84)

Condition: excellent (used), Year of construction: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Ksdpjzy Icdefx Adljdt Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface 2x air valves 1x hydraulic core pull Hot runner control Injection unit hardened - bimetallic Proportional valve on the injection unit – precise injection Screw diameter change possible Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), gravimetric Brabender dosing unit 3 units for sale Ksdpfx Aeufx Tijdledt However, the load cells are defective so that the dosing unit can only be used volumetrically.

Condition: excellent (used), Year of construction: 2008, Battenfeld HM 100/525 with Battenfeld R10S Robot / Operating Hours: approx. 19,000 in automatic mode Kjdpfx Ajzy Il Sodledt Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2,100 bar Dosage volume: 251 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x420 mm Platen size: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 - touchscreen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total operating hours: 26,580 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Battenfeld R10S Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servomotors (electric); axis B - pneumatic, axis C Robot with adapter Purchase of robot at extra cost Dimensions: Weight: 4,600 kg Length/Width/Height: 4.23x1.41x2.05 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Kdedozy Ikzjpfx Adlet Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: new, Year of construction: 2026, functionality: fully functional, working width 1300 mm manual cleaning brush manual element height adjustment glue dosage adjustment CE marking Kdedpfx Aozz Ni Uedlet safety switch power supply 380V completely new 2026

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Kdsdpfszy Ih Hex Adlet Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2008, Manufacturer: Dumek Model: DV 1100 Year: 2008 Type: Volumetric dosing unit Dosing technology: volumetric piston pump Number of filling heads: 1 Outer diameter of the filling head: 12 mm (8 mm also in stock) Speed control: pneumatic Type of product : Liquid: aqueous / viscous Kodszv Uzropfx Adljdt Semi-liquid: gel / paste Manual or semi-automatic operating mode Adjusting the volume rate: cubic centimetres per manual handwheel Minimum dosage range: 20 mL Maximum dosage range: 1100 mL Hopper capacity: 50 L Product support with height-adjustable Operating video available on request Dimension : 112 x 50 x 175 cm Weight : 90 kg

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ hour.High quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Kjdpfx Aex D A N Todledt Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: good (used), overall weight: 400 kg, Skinetta ASK 450 Tension banding machine Purpose of the machine The tight banding machines in the SKINETTA series are used to band (wrap) individual products or several individual products tightly with polyethylene film. In contrast to shrinking machines, the wrapping film is pulled tightly around the pack before sealing. This tightening is the main advantage of the process. The result is up to 20% less film consumption. A particular advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosage. The sealing (welding) of the film takes place in a very small space and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heating hood downstream and using a correspondingly wide film, the excess film protruding beyond the container can be shrunk to the side. This process makes the pack even more stable and prevents individual products from falling out of the sides of a grouped pack. Full closure of the packs by sealing, sealing and side folding is possible with appropriate additional equipment. The range of SKINETTA stretch-banding machines comprises 6 basic types for film widths from 25 mm to 200, 290, 440, 590, 790 and 1250 mm. In addition to the single-track version, two to four-track systems are manufactured to increase output. - In the SK series (semi-automatic), the products are grouped on the machine table by an operator. The insertion into the film and the subsequent stretch-banding process is triggered either by a foot switch or a two-hand control, subsequent full automation is possible (except for type SK 200), - In the ASK series (fully automatic), the products are fed, grouped and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming and special equipment based on over 20 years of experience allows adaptation to the most diverse customer tasks with tried and tested standard elements. Technical data Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 Power requirement: 6.1 kW Kjdpfxop U T Ifs Adljdt Additional equipment: Bar chain conveyor Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, Working width: 1300 mm Manual adjustment of element height Glue dosage adjustment CE marking Safety switch Kedszx U R Sepfx Adledt Power supply: 380 V Completely new, year 2025

Condition: new, Year of construction: 2025, Working width: 1300 mm Manual adjustment of element height Glue dosage adjustment Kodszx U Tajpfx Adledt CE marking Safety switch Power supply: 380 V Completely new, year 2025

Condition: excellent (used), Year of construction: 2003, Arburg 320S 500-60 Year of manufacture: 2003 Kdjdpfxezy Idze Adlet Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA Additional Equipment: Euromap 12 Robot interface Air valve x 1 Controller with 6 hot runner zones Hardened injection unit - bimetallic Dimensions: Weight: 2,350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pump/Motor: 11 kW Heating capacity: 4 kW Total power: 15 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), ZACMI 40-Cup Rotary Telescopic Filler – Stainless Steel ZACMI automatic telescopic filler with 40 cups, designed for the volumetric filling of solid and particulate food products into containers within continuous industrial production lines. Manufactured by ZACMI, the machine features a rotary telescopic filling system with 40 dosing cups, enabling the automatic and continuous feeding, dosing, and filling of the containers. This type of technology is particularly interesting for the canning industry, where a regular volumetric dosage of solid or particulate products is required, along with their proper introduction into cans or other rigid containers. Its construction, primarily in stainless steel, along with the rotary carousel and automatic transport systems, provides a robust solution for high-production industrial lines. MAIN FEATURES -Manufacturer: ZACMI -Type: Automatic telescopic filler -Number of dosing cups: 40 -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dosing -Automatic container handling -Continuous container input and output -Integrated conveyor -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling using a rotary system with 40 cups. The containers are automatically fed and transferred to the filling carousel. During the cycle, the dosing cups control the amount of product and transfer it into the container. Once filled, the containers automatically continue to the next stage of production. It can be integrated with: -Product feeding systems -Can feeders and conveyors -Liquid or brine dosing systems -Can sealers -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling and end-of-line equipment APPLICATIONS Especially suitable for canning industries and processors of vegetables, legumes, and other solid or particulate foods that require a high-capacity automatic filling system. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. Kdodpfx Aezw Dbwodlot The combination of 40 cups, rotary operation, and telescopic filling technology makes this ZACMI a particularly interesting solution for continuous production canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Kjdpfxjzy I Rzj Adlodt Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), functionality: fully functional, The SERIA 4-head filling machine automates the dosing of liquid, semi-liquid, pasty food products, or those containing inclusions. Thanks to its four synchronized filling heads, it ensures precise, homogeneous, and rapid filling of containers. This allows manufacturers to improve their production rate while reducing material losses and dosage variations. Furthermore, this system integrates a MASO SPS-2 sinusoidal volumetric pump, which is renowned in the food industry for its particularly gentle transfer. Unlike traditional pumping systems, this technology preserves the texture of sensitive products while maintaining a constant flow rate. Consequently, the machine is perfectly suited for sauces, purees, ready meals, meat preparations, catering products, fillings, and recipes containing pieces. In addition, the pump limits shear, reduces pulsations, and facilitates clean-in-place (CIP) cleaning, depending on the system configuration. Moreover, the design, entirely made of stainless steel, facilitates daily cleaning operations and meets the hygiene requirements of food processing plants. As a result, the filling machine can be easily integrated into an existing packaging line, whether for high-volume artisanal productions or automated industrial lines. It also guarantees excellent repeatability of dosages, which directly contributes to the quality of the finished products. Finally, Europ'Équipement completely reconditions this filling machine before it is offered for sale. Our technicians inspect each mechanical, hydraulic, and pneumatic component, replace worn parts when necessary, and then carry out comprehensive tests before putting the machine back into service. Thus, this SERIA 4-head filling machine represents a reliable, economical, and durable solution for modernizing a production line while controlling investment costs. Technical specifications: Manufacturer: SERIA Constructeur Machine type: Automatic 4-head food filling machine Year of manufacture: 2008 Number of filling heads: 4 Construction: Food-grade stainless steel Dosing pump: MASO Process Pumpen SPS-2 Pump technology: Sinusoidal volumetric pump with low shear Compatible with liquid, pasty, and highly viscous products Suitable for products containing pieces Kedpfx Adszh Hiljljdt Consistent flow rate with low pulsation Clean-in-place (CIP) possible, depending on line configuration

Condition: used, Year of construction: 2015, Manufacturer: Packinov Model: 1015 D Year : 2015 Type: Semi-automatic electric dosing machine Kdedpfox R Dhysx Adlst Volume digitally adjustable Dosage cylinder available: 2 blocks, max. 85 ml. 3 x hoppers, 1 of which is double-jacketed Mixer for hopper Temperature controller Foot-operated actionner Control panel Height-adjustable frame Machine dimensions: 110 x 100 x 190 cm

Condition: like new (used), ZACMI Automatic Telescopic Filler – Canning Industry ZACMI automatic telescopic filler, designed for the volumetric filling of solid and particulate food products in cans and other rigid containers within continuous production lines. Manufactured by ZACMI, a specialist in machinery for the canning industry, the machine utilizes a rotary telescopic filling system that allows for the automatic, controlled, and continuous dispensing and introduction of the product into the containers. This type of technology is especially suitable for canning processes where a regular volumetric dosage of solid or particulate products is required, while maintaining a continuous flow of containers through the line. MAIN FEATURES -Manufacturer: ZACMI -Type: Automatic telescopic filler -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dispensing -Automatic container feeding and positioning -Continuous container infeed and outfeed -Integrated conveyor -Industrial construction in stainless steel -Perimeter enclosure with safety guards -Integrated control panel -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling of containers using a rotary telescopic system. The containers are automatically fed and transferred to the carousel, where the dispensing and subsequent introduction of the product takes place. Once the filling is complete, the containers automatically continue to the next stage of the process. It can be integrated with: -Product feeding systems -Can feeders and conveyors -Liquid, oil, or brine dispensers Kdjdpfx Ajxp Rqpsdlot -Can sealers -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling machines and end-of-line equipment APPLICATIONS Especially suitable for canning industries, processors of vegetables, legumes, and other solid or particulate food products that require automating the filling of containers. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. The combination of ZACMI technology, telescopic filling, and continuous rotary operation provides a robust solution for industrial canning packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C Kdsdpolhqndjfx Adlot - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump Kdjdpfxot Nfarj Adljt • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: used, Technical data: Working width: 300 mm Maximum roller spacing: 60 mm Safety switch Adhesive dosage adjustment Manual roller spacing adjustment Kodpfx Adsx Hgrgoledt Power supply: 400 V Motor power: 1.5 kW Overall dimensions: Length: 830 mm Width: 880 mm Height: 1410 mm

Condition: like new (used), Year of construction: 2017, Nordson Durablue 4F hotmelt glue unit suitable for up to 6 hose connections. This unit is equipped with a gear pump, unlike a (double-acting) plunger pump, this has no so-called dead stroke. Kjdpfxevupz Ie Adljdt This makes the unit very suitable for constant glue assignments where an even glue dosage is important. The glue unit has been completely cleaned internally and externally by us, tested and is fully functional.

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Ksdpfxsl Hx Rdo Adljdt

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Kodox T Aqfopfx Adlsdt Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen Kjdpfel Rix Nex Adlodt →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: used, Year of construction: 2006, Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph This Monoblock  offers a bottling unit manufactured by Bertolaso in 2006. Although designed to operate at a maximum speed of 2000 bottles per hour (BPH), operators have never used it, leaving it in very good condition. Furthermore, the Olimpia 12/12/1 monoblock efficiently handles glass containers, allowing for both 0.75 and 1.5-liter formats, and performs especially well for bottling still wine and beer. Rinsing System of the Used Filling Monoblock OLIMPIA 12/12/1 The Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph achieves rinsing through a gripper system equipped with 12 clamps for glass containers. In fact, this system ensures uniform container cleaning before filling. Moreover, its single-type treatment prepares containers efficiently, maintaining the final product’s integrity. This configuration controls the rinsing flow stably, achieving efficiency even in high-intensity work environments. Kdjdpfovgvfksx Adlot Filling Technology: Gravity Valves with Light Depression The Monoblock BERTOLASO integrates 12 valves that fill containers using gravity, supported by light depression, ensuring precise liquid dosage. Consequently, this method minimizes air presence in the container, which helps preserve product quality and increases storage stability for wine and beer. Fixed Nozzles for Consistent Filling Additionally, the fixed nozzles of the Filling Monoblock BERTOLASO maintain stable, continuous filling, ensuring homogeneous liquid distribution in containers. As a result, this design enables the monoblock to handle high volumes efficiently, therefore reducing product waste and optimizing production processes. Operational Condition and Storage State The Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph remains in storage, having never been activated. Thus, this storage state keeps all components in pristine condition, so they are ready for immediate operation. Therefore, it serves as an ideal solution for those seeking a ready-to-use bottling monoblock without wear or restoration requirements. Production Advantages of the Used Filling Monoblock OLIMPIA 12/12/1 The Monoblock BERTOLASO adapts especially well to production lines requiring flexibility for different container formats and bottled products. In particular, its ability to manage various container sizes (0.75 L and 1.5 L) expands its applications, making it a versatile choice. Finally, the machine’s overall design enhances efficiency, ensuring high performance during production runs.