Used Dosing Station for sale (7,372)

Condition: new, 4 never used dosing stations. Gkodpfx Aswvmiwoabjc

Condition: new, DOPAG Micromix Gkjdpfx Ajxcgpzsabjc The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled.

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Godpfx Aoh Akm Teabskc

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Gkedpfxjibx S Ne Aabsc Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed Gksdpju D E A Defx Aabec - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, Processing and dosing system for green waste, wood chips and fuel from biomass consisting of: - 2 x feed hopper 1,500 x 8,000 mm, with dosing and equalization stages - Drum screening system 2,300 x 7,000 mm, screening drum 15 mm² - Overband magnetic separator Permanent magnet - Disc separator 1,500 x 4,500 mm, separating cut 15-100 mm² - Elevation, steel construction - Conveyor belts, distribution belts - Switch cabinet with control system Manufacturer: Rudnick & Enners Project no.: AF4 167 C Year of construction: 2015 Operating hours: approx. 11,000 h Location: Hesse (Germany) Availability: August 2024, by arrangement Service details: Gkodpstynftefx Aaboc The system is in very good technical condition. Warranty: The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects All prices are ex works, net plus VAT, excluding dismantling, packaging, transportation and crane provision! We reserve the right to prior sale, changes and repairs. This overview is for your information only and does not constitute a binding offer.

Condition: new, functionality: fully functional, Year of construction: 2024, A crawler mobile stone crusher is a mobile crushing device that has a tracked chassis, which allows it to move around the site and be transported from one location to another. This type of crusher is generally used in areas where there are space restrictions and the stones need to be crushed directly at the site, making it a versatile and flexible option for various applications. Here are some key features and aspects of crawler mobile stone crushers: 1. Mobility: - The primary advantage of a crawler mobile stone crusher is its mobility. The tracked chassis enables it to move easily on different types of terrain, making it suitable for a wide range of applications, including construction sites, quarries, and demolition projects. 2. Crushing Mechanism: - Crawler mobile stone crushers are equipped with a primary crusher to break down the large rocks into smaller pieces. Common types of primary crushers include jaw crushers, impact crushers, or cone crushers. Gsdpfx Aaeq Nxpgebekc 3. Versatility: - These crushers are versatile and can handle various types of materials, including hard rocks, ores, and recycled concrete. They can be used for primary, secondary, or tertiary crushing depending on the specific requirements of the application. 4. Remote Control Operation: - Many crawler mobile crushers are equipped with remote control systems, allowing operators to control the equipment from a distance. This feature enhances safety and efficiency, especially in challenging or hazardous environments. 5. Compact Design: - Crawler mobile stone crushers typically have a compact design, making them suitable for working in confined spaces or on construction sites with limited available space. 6. Hydraulic System: - The crushers are often equipped with a hydraulic system to facilitate quick and easy adjustment of the crusher settings. This includes adjusting the crusher's discharge opening and controlling the feed rate. 7. High Production Capacity: - Despite their compact design, crawler mobile stone crushers can have high production capacities. This is crucial for efficiently processing large volumes of material on construction sites or in mining operations. 8. Screening Unit (Optional): - Some crawler mobile crushers come with an integrated screening unit, allowing the production of multiple particle sizes in a single pass. This can be particularly useful in applications where a specific range of sizes is required. 9. Power Source: - Crawler mobile stone crushers are typically powered by diesel engines, providing the flexibility to operate in remote areas where electrical power may not be readily available. 10. Easy Maintenance: - Many crawler mobile crushers are designed with ease of maintenance in mind, with features such as access panels and service points to simplify routine inspections and repairs. Crawler mobile stone crushers have become popular in the construction and mining industries due to their flexibility, mobility, and ability to crush a variety of materials on-site. They offer a solution for efficient and convenient mobile crushing operations in diverse working environments.

Condition: excellent (used), Year of construction: 2020, Complete cleaning station package : 1x System Cleaners - Manual Satellite TYPE S2 Low Pressure Cleaner 1x stainless steel hose reel approx. 20m with various nozzles and lance 2x stainless steel canister wall bracket S2 is a solid satellite station with high operational reliability The S2 satellite can be used in decentralized and centralized cleaning systems and manages a detergent with the option of adding a separate outlet for another product. It can be used in a pressure range of 3-8 bar for connection to the water mains or 15-40 bar for connection to a boosted water supply from a System Cleaners main station, pump station or booster station. It performs rinsing, foaming and disinfection*. The S2 satellite is protected by a stainless steel cabinet and can either be wall-mounted or mounted on a trolley for mobile cleaning. Features Rinsing, foaming and disinfecting Pressure range: 3-8 or 15-40 bar Up to two chemical inlets for either premixed or concentrated detergents Gedpfxsrk D E Is Aabekc System Cleaners stainless steel needle dosing valve as standard - alternatively click dosing valve or fixed dosing for decentralized chemical supply Hygienic design High-quality materials with high chemical resistance Intuitive operation with mechanical function selector Available for wall mounting or mounted on a trolley Further devices are available, please enquire Very good condition, see pictures Location is 75053 Gondelsheim Collection or shipping by forwarding agent possible.

Condition: like new (used), Baktec water Dosing machine and chiller In good working condition for more information please sent an request Gkjdoump Axspfx Aabjc

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication Gjdpovuuknjfx Aabokc can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity). Gsdpfx Aew Ed S Ieabjkc

Condition: used, functionality: fully functional, The device serves as a backup source of 1.8 MPa steam, particularly in the event of a failure of one of the back-pressure turbo generators when there is a shortage of 1.8 MPa steam, or during other special operations requiring the reduction station as a source of 1.8 MPa steam through direct reduction from 9.6 MPa steam. Godpfewwt Upsx Aabjkc A total of 4 such reduction stations are used in the Heating Plant's steam system. Steam: Quantity before RS: 100 max. 105 t/h Pressure before RS: 9.0 MPa max. 9.6 MPa Temperature before RS: 515°C max. 530°C Temperature after RS: 320°C max. 360°C Pressure after RS: 1.8 MPa Cooling Water: Pressure before RS: 3.6 – 3.8 MPa Temperature before RS: 150°C Quantity before RS: 14.0 max. 20.0 t/h Opening Overpressure of Safety Valves: 1 pc 2.4 MPa 1 pc 2.5 MPa

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Gsdpov Abm Esfx Aabskc Dimensions: 4900 mm x 1500 mm x 2300 mm.

Year of construction: 2021, condition: like new (used), 1.Introduction: 1. This document describes the functional requirements regarding a; 1.1. LC tray degassing chamber 1.2. LC tray degassing chamber is a (controlled vacuum chamber) in which an aluminum tray containing LC liquid is degassed in a vacuum environment during a period of time (i.e. entrapped air is evacuated) Vacuum profiles; 1.1. Pressure set points adjustable between 1.103 and 1.10-3mBar 1.1.1. Measurement range: 1.103 – 5.10-4 1.2. Time set points adjustable between 1 and 600min per step 1.2.1. Degassing step (D) can be minutes to days 1.3. Evacuation and ventilation rates must be controllable 1.4. The evacuation cycle (A – D) is performed automatically 1.4.1. The vent step (E) must be activated manually (operator) 1.5. Typical degassing profile 2.Interior; 2.1.Stainless steel (aluminum) polished process chamber (inside) 2.1.1. Leak rate to be discussed 2.2. LC-tray (adaptation) drawer to easily (un-)load the LC-tray (no shock/shake movement allowed), see Section 2 LC-tray dimensions and appendix 1 2.3. LC tray must be level (waterpas) at all times to prevent LC spillage 2.4.Chamber must be easily/quickly accessible for cleaning and/or LC tray Gksdpfx Aajwam Saeboc (un)loading 2.5.Chamber inside must be polished for easy cleaning and prevention of contamination and/or moisture collection 2.6.Monitoring (window) possibility of the degassing cycle i.e. monitoring LC liquid surface behavior in the LC tray 2.7.No process contamination caused by chamber material (-manufacturing)

Condition: used, Year of construction: 2003, pressure 400 t Gjdpsvzxpusfx Aabekc distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O. Type: DOSOWNIK 2G, Number: 439, Year of construction: 2014, Gkedpevz H N Nsfx Aabec Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Dimensions: 4200 mm x 1300 mm x 1800 mm.

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2025, A mobile jaw crusher is a type of crushing machine that is equipped with a jaw crusher and is mobile in nature. This crusher is designed to be moved around and taken to various locations, especially those where processing materials are needed on-site. Mobile jaw crushers are widely used in industries such as mining, construction, and recycling for processing a variety of materials. Here are the key features and components of a typical mobile jaw crusher: 1. Jaw Crusher: - The primary crushing unit of the mobile jaw crusher is the jaw crusher itself. It consists of a fixed jaw and a movable jaw, with the material being crushed between them. 2. Mobile Chassis: - The crusher is mounted on a mobile chassis, which may have tracks for mobility or be wheeled for easy transport. The mobility of the chassis allows the crusher to be easily moved between different work sites. 3. Feeder: - A vibrating feeder is typically included to feed the material into the jaw crusher. It ensures a consistent and controlled feed of the material to the crushing chamber. 4. Engine or Power Source: - Mobile jaw crushers are powered by diesel engines or electric motors. The choice of power source depends on factors such as the availability of electricity and the need for mobility. 5. Control Panel: - A control panel is provided for operators to manage and monitor the crusher's operation. It may include controls for starting and stopping the crusher, adjusting the discharge setting, and monitoring various parameters. 6. Hydraulic System: - Mobile jaw crushers often feature a hydraulic system to adjust the crusher's settings. This includes the adjustment of the jaw crusher's CSS (Closed Side Setting), which influences the product size. 7. Conveyor Systems: - Conveyors are used to transport crushed material from the jaw crusher to the next stages of the processing plant or for stockpiling. Some mobile jaw crushers have integrated conveyor systems. 8. Magnetic Separator (Optional): - Some mobile jaw crushers come equipped with a magnetic separator to remove metal contaminants from the crushed material, preventing damage to downstream equipment. 9. Dust Suppression System (Optional): - To control dust generated during the crushing process, some mobile jaw crushers may be equipped with dust suppression systems. 10. Remote Control (Optional): - Remote control capabilities allow operators to control the crusher from a distance, enhancing safety and convenience. 11. Application: - Mobile jaw crushers are used for primary crushing of various materials, including hard rock, construction and demolition waste, concrete, asphalt, and natural aggregates. 12. Versatility: - Mobile jaw crushers are versatile and can be used in various applications. They are suitable for both recycling and quarrying operations, offering flexibility in processing different types of materials. Mobile jaw crushers are beneficial for operations that require frequent relocation or for processing materials in remote locations. They provide a cost-effective solution for on-site crushing and are widely used in the construction and mining industries. Operators should follow safety guidelines and manufacturer recommendations for proper operation and maintenance. Gkedpfx Aasq I N Atjbjc

Condition: good (used), OMRON CPM1A control, 4 stations. Target machine for assembling and compressing door glass modules. Gksdpfjfruvcex Aabjc Price is a net target price, a matter of final price agreement Purchase, acquisition, asset management of industrial equipment and machinery. Wide range of used machinery, industrial equipment

Condition: excellent (used), For sale: a complete set of professional measuring stations from the renowned German brand ULTRA Germany, models: • ART. 27484-032 – POS. 12 • ART. 27484-033 – POS. 10 • ART. 27484-030 – POS. 8. The devices are designed for precise positioning, inspection, and calibration of mechanical and measuring components in production and quality control processes. An ideal solution for measurement laboratories, quality departments, research centers, or tool shops requiring high repeatability and accuracy. • Construction made of high-quality steel and aluminum – robust, stable, and durable • Precision linear guides ensure smooth movement and high measurement accuracy • Height adjustment and holder locking for quick adaptation to the tested component • Capability to mount dial indicators, holders, and other measuring accessories • A reliable solution for series measurements and part positioning in production processes. Condition: used, in very good technical and visual condition – devices are fully functional, sourced from a quality control department. Price refers to Gkjdexltn Aopfx Aaboc

Condition: ready for operation (used), Year of construction: 2011, Powder feeding cabinet with suction hood and potentially a dust filter, twin screw powder feeder is installed under the cabinet with a level sensor. Gedew Dfv Sopfx Aabskc

Year of construction: 2018, condition: used, Plant for Drawing Oil Preparation in Tube Production The plant is designed for the optimal preparation of undrawn tubes prior to the subsequent drawing process. In this process, the tubes are evenly treated in drawing oil baths, ensuring homogeneous wetting of the surface. The drawing oil bath provides uniform lubrication, which reduces frictional resistance during the drawing operation, improves surface quality, and increases tool life. The system is designed to ensure a continuous material flow as well as constant bath temperature and quality. It therefore represents a key process step in tube manufacturing and significantly contributes to both the quality and cost-effectiveness of production. Technical Specifications of the Plant Automatic Bridge Crane Type: Matr. 2981 t.6,5 Gedsxnindopfx Aabekc Max. translation speed: 40 m/min class: A6 (FEM 1.001 – ISO) Number of wheels: 4, Ø 315 mm Crane gauge: 13,000 mm Net crane weight: 8,000 kg Motor: Type FC90LFECCL-4, power 1.5 kW, protection degree IP55 Brake: Disc type, DC V400 Gearbox: Type TP 315/90BR, ratio 1/35 Power supply: 400 V – 50 Hz

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kohlhoff Hygienestation for shoes and hand sanitation year of construction 2017 very good condition! Gkedpfexl Tq Dsx Aabec

Year of construction: 2022, condition: like new (used), functionality: fully functional, Fully automatic water mixing and dosing unit with automatic pre-mixing control and numeric input keypad Langheinz Model: Aquamix 32 Your advantages: - Fast and precise input of temperature and water quantity - User-friendly control panel with large, bright display - Compact and flour-dust-proof stainless steel housing - Easy connection to an ice water system - Comes with food-grade dispensing hose and stainless steel pipe elbow - Includes repeat dosing function Technical data: - Temperature inlets: 3 (including ice water) - Dosing quantity range: 0.1 l - 999.9 l - Temperature control range: +0.5°C to +70°C - Temperature accuracy: +/-2°C Godpfx Aexmq U Ajabokc - Dosing accuracy from 1 l: +/- 0.1 l - Water flow at 3 bar: up to 30 l/min - Water connection: 3/4" male thread - Power supply: 100 - 240V; 50Hz - Device dimensions (W x H x D): 300 x 300 x 170 mm Used machine, cleaned with warranty Visit our large bakery machinery showroom!

Year of construction: 2017, condition: used, engine 12 Zylinder cubic capacity 57200 ccm total power requirement 3.438 kW Electric capacity 1.516 kw thermal performance 1.425 kW Number of working hours ca. 34.683 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Gkodpfx Aajw Rrgceboc The combined heat and power unit is sold professionally dismantled and free on truck. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale.

Condition: excellent (used), I am selling Weller WTCP-S soldering station. Price per 1pc. Gkodpfx Aasu Svmvsbec