Used Dosing System for sale (40,825)

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee Blsdpfey Dc R Tsx Aktjp

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Bljdpfx Asznli Doktep Manufacturer: MANZ PLC control, touch screen display, Siemens

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Bsdpfx Akohkzu Ajtelp Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Bledpfxshk S Sdj Aktsp Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software Bodpskdnv Tsfx Aktjlp - with tube laser software very good condition

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight in standard version: approx. 82 kg Bledpedbny Ejfx Aktjp Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Please choose the desired size: new, galvanized: Depth: 305,381,457,610,762,914 width: 610,762,915,991,1219 Special load: 100-250 kg/Shelf Metric scaling: new, galvanized Depth: 300,400,500,600,700,800 Width: 800,1000,1200 Special load: 120-250 kg/shelv Stand size: new, galvanized 2 m, 2.5 m, 3 m, 4 m Bjdpfxsduz Sqe Aktolp Used, RAL 7042: 610 * 915 mm For larger purchases, we offer a discount. Ask our price for Transport cost. We are dealing with rebuying, selling, assembling the shelves. Here you can find pallet racks, cantilever racks etc.

Condition: used, RMS RMS Control and Measurement Technology – Vibration testing system with accessories For sale is a high-quality set from RMS Control and Measurement Technology, as well as a fan from Rietschle, ideal for vibration testing, resonance tests, and material analysis. Included devices: RMS CONTROL AND MEASUREMENT TECHNOLOGY – Vibration exciter, type SW 6011, No. 2230 30 V – 200 A 13 mm / 1.2 m/sec / 100 g Mounting frame, type SWT 6211/1, No. 6074 – stable mounting for test objects Power amplifier, type TGE 10‑1/7 – for optimal control of the vibration exciter Rietschle SKG 410‑2.01 fan – high-performance vacuum/pressure blower Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Blodpfx Aszikdcsktep We are happy to answer any further questions you may have by phone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Bsdpfjzimaajx Aktslp Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Blsdpfx Akezixy Sjtjp Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Paper band filter with abundant nonwoven fabric SEITZ, type PFA 200 Bljde Afpyxjpfx Aktop

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer a complete, ready-to-use mineralizer in perfect condition. Blsdpfs Afubhex Aktjp Mineralizer model: Titan MPS External Exhaust. Please feel free to contact us and arrange a visit to see the equipment on-site.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 300 g/m², product length (max.): 320 mm, product width (max.): 620 mm, TECHNICAL DETAILS Minimum paper size: 120 × 210 mm Maximum paper size: 320 × 620 mm Paper weight: 65–300 g/m² Booklet heads: 2 ISP booklet heads Maximum book thickness: 10 mm Maximum page count: approx. 200 pages at 80 g/m² Staples per spool: approx. 50,000 EQUIPMENT Plockmatic Morgana BM 5050s Booklet Maker VFX high-performance feeder with vacuum feeder CST 5000 creasing and 2-sided trimming module for head and foot trimming Blsdj Ahnqgopfx Aktjp FM 5000 finishing module for front trimming BEST 4000-1 extended conveyor stacker Anti-static kit for VFX feeder Anti-static kit for CST 5000

Condition: good (used), mileage: 2,52,835 km, power: 74 kW (100.61 HP), first registration: 04/2018, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, wheelbase: 3,060 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 2, total length: 4,910 mm, total width: 1,800 mm, total height: 1,840 mm, loading space length: 1,960 mm, loading space width: 1,430 mm, loading space height: 1,190 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 697 kg, Curb weight: 1463 kg, Gross vehicle weight: 2160 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 1300 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 4, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Silver, Metallic, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 74 kW (99 hp), Number of cylinders: 4, Displacement: 1499 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, Air conditioning, Navigation, Parking distance control, Tow bar, Spare wheel, Tire type: Summer tires = Additional Information = General information Number of doors: 1 License plate: V-914-NP Bljdpez Rv Egofx Aktop Axle configuration Tire size: 205/60R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,463 kg Payload: 697 kg GVW: 2,160 kg Functional Loading area height: 57 cm Maintenance APK (Periodic Vehicle Inspection): Valid until 04.2027 Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 1

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Bledpfjz Nxxajx Aktop Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Stock number: 1172

Condition: excellent (used), Year of construction: 2017, No. 1 rectangular filter station with a mechanical shaker cleaning system, operating under positive pressure, with the following dimensions: Width: 3,400 mm Length: 6,600 mm Height: 7,500 mm Filtering surface: 396 m2 Manufactured from galvanized steel sheet, complete with: Blodpfx Akez Hz Htjtsp - No. 160 polyester satin filter bags, 350 g/m², Ø250 × 3,000 mm, open at both ends; - No. 320 galvanized quick-release clamps, Ø250 mm; - No. 2 filter support frames; - No. 1 electric motor, 2.2 kW – 6 pole; - No. 1 external filter housing enclosure; - No. 1 access door to the filter compartment; - No. 1 vertical access ladder to the filter compartment; - No. 2 clean-air discharge stacks complete with air sampling connections; - No. 6 braced support legs; - No. 1 dust collection hopper complete with inspection hatch; - No. 1 screw conveyor, complete with 2.2 kW – 4-pole gear motor, steel shaft and flight, bearings, and supports; - No. 1 rotary airlock valve, complete with 1.5 kW – 4-pole gear motor, steel shaft, and rubber blades; - No. 1 high-level indicator; - No. 2 transparent PVC inspection windows; - No. 1 Ø200 mm tee connection complete with anti-clogging micron vent; - New galvanized bolts, nuts, and sealing gaskets for future reassembly.

Condition: used, empty load weight: 9,500 kg, axle configuration: 3 axles, first registration: 08/2019, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 7,600 mm, Year of construction: 2019, Equipment: ABS, Tare weight: 9500kg, Loading area (L W H): 13.403 mm x 2.490 mm x 2.650 mmRiepu izmērs: 385/55 R22.5, Loading area volume: 88 m³, 1. ass: , 2. ass: , 3. ass: , Pneimatiskā piekare, Palešu furgons, Elektroniskā bremžu sistēma EBS, Rezerves riteņa turētājs (2x), Ferry फेरी फास्टनिंग के छल्ले, Šasija ir pieskrūvēta, 1x15- un 2x7-pin spraudnis, Āķis gaļai, Antispray, Bodpfxez Sfq Ne Aktslp

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. Bledpfxez Srm Ne Aktjp The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 +++ Subject to prior sale! +++ Bedpfjz Tn Edjx Aktjlp +++ Attention: This unit is part of an online auction! +++

Condition: excellent (used), functionality: fully functional, For sale is a well-maintained Holzkraft ASA 2403 mobile dust extraction unit. This unit is ideally suited for extracting wood chips and dust in carpentry shops, joineries, as well as hobby and professional workshops. Bledpfoz Smwqsx Aktjp Thanks to its high air flow rate of approximately 2,850 m³/h, the machine ensures reliable extraction at various woodworking machines. The mobile base allows the extraction unit to be used flexibly within the workshop. The unit is in used but well-maintained condition and is technically functional. Scope of delivery: Holzkraft ASA 2403 mobile dust extraction unit Base with rollers Filter bag Chip collection bag Magnetic switch Transportation is possible for an additional charge! The machine will be inspected before sale. For used machines with a manufacturing year of 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information is provided without guarantee.

Condition: good (used), mileage: 2,29,090 km, power: 55 kW (74.78 HP), first registration: 03/2015, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,380 mm, total width: 1,810 mm, total height: 1,800 mm, loading space length: 1,760 mm, loading space width: 1,500 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 666 kg, Tare weight: 1269 kg, Gross vehicle weight: 1935 kg, Unbraked towing capacity: 680 kg, Braked towing capacity, center axle: 995 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Lighting type: Halogen lamp, Engine power: 55 kW (74 hp), Number of cylinders: 4, Engine displacement: 1560 cc, Fuel: Diesel, Euro: 5, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, air conditioning, side door, spare wheel, Tire type: All-season tires = Additional Information = General information Number of doors: 1 Bljdpfxjz S Ag Ts Aktsp License plate: VN-057-K Axle configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,269 kg Payload: 666 kg GVW: 1,935 kg Functional Loading area height: 58 cm Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Bedpfsz Iql Isx Aktelp Price: Upon request

Condition: used, 3D Systems Type: ProJet 3000 HD Bsdpjzdnnuofx Aktolp Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) Blodpfx Akezdn T Rotep (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, VETTER Crane Technology PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist. For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,590 mm Support distance B: 5,100 mm Beam length: 6,170 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Travel unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Steel support and beam construction Inspection book available EC declaration of conformity available Documentation available Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Longest component: approx. 6.2 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam construction Floor control / operating elements Main switch Inspection book Blodpfx Aoz Sn Ddsktsp EC declaration of conformity Documentation Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping possible. Subject to changes, errors and prior sale.