Used Double Plate Clutch for sale (23,361)

Condition: excellent (used), Year of construction: 1992, I sell the double knife veneer guillotine Josting ZFS 2800. Year 1992 / fully reconditioned 2007. Cutting length 2810mm. Cutting height 80mm. Cutting width 20-470mm. Njdpfevxli Aox Adwocl Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1987, I sell the double knife veneer guillotine OMPEC OA 3200/400. Year 1987. Njdpfx Adjyc I Tvjwocl Cutting length 3200mm. Cutting height 80mm. Cutting width 20-450mm. Very good condition. Available immediately.

Condition: good (used), I am selling a Rema DS 12/ST in good condition. Njdpfx Aou Uvv Todwjcl

Condition: used, tank capacity: 20,000 l, GENERAL Design: horizontal Remarks: Tank with double safety jacket made of Fe (according to DIN 6616D); Test overpressure for tank: 2 bar; Test overpressure for safety double jacket: 0.6 bar; 2 loose saddle supports, Fe; 1 manhole with 600 mm diameter and 1 manhole with 500 mm diameter; Tank without bottom outlet; light exterior protective coating Inner diameter: 2,500 mm Total height: 2,950 mm Total length: 4,700 mm Location: Bremen Nameplate: Volume: 20,000 liters Product-contact surface material: V2A 1.4301 (AISI304) Ncjdoyck Ucjpfx Adwjl Condition: used Cylindrical length: 3,800 mm Last application: chemicals TANK Support type: saddle EQUIPMENT Manhole / Dome: on top of the tank Outlet: not present Remark: Manhole cover plated

Condition: used, tank capacity: 1,800 l, GENERAL Design: rectangular Remarks: Double-chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); each chamber has a manway, diameter approx. 415 mm; each chamber has 1 outlet (1 x internal pipe diameter approx. 35 mm, 1 x internal pipe diameter approx. 38 mm); 2 welded reinforcements made of V2A in one of the chambers (see photos) Total width: 2,080 mm Total height: 1,500 mm Total length: 1,100 mm Location: Bremen Volume: 1,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: Food products TANK Mounting: Feet Njdpfjyck Tfex Adwscl Number of feet: 4 pieces EQUIPMENT Manway / Dome: on the tank MATERIAL CHARACTERISTICS Outer surface: marbled Feet material: stainless steel

Condition: used, Year of construction: 2023, tank capacity: 1,00,000 l, GENERAL Equipment: Venting/air release Design: Horizontal Year of manufacture: 2023 Notes: Manhole diameter approx. 600 mm; includes optical leak detector, tank fitting for heating oil, overfill prevention device, and ladder with working platform; External diameter: 2,900 mm Total length: 16,050 mm Heating/cooling: present Ncodpfxeyckwqj Adwol Location: External storage Minden Technical documentation: Drawing, various documents Nameplate: Volume: 100,000 liters Product-contact material: Steel Condition: used Cylindrical length: 14,960 mm Last application: Heating oil TANK Support type: Saddles welded on HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: on the tank

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Outlet: DN50 DIN 11851 Njdpfx Ajyckt Sodwscl MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Ncedoyckt Eopfx Adwjl Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Nsdpfx Aoycktredwecl Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: used, tank capacity: 44,480 l, GENERAL Equipment: Lifting lugs Design: Vertical Remarks: Double-chamber storage tank divided into two 22,240 litre tanks; total height according to drawing, cylindrical height for each 22,240 litre tank according to drawing Internal diameter: 3,200 mm Total height: 7,380 mm Max. overpressure: 1.0 bar Location: 6250 Kundl, Austria Technical documentation: Drawings, various documents Nameplate: Vacuum: 0.25 bar Volume: 44,480 litres Cylinder wall thickness: 6 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Njdjyci Unepfx Adwjcl Cylindrical height: 1,930 mm TANK Max. permissible operating temperature: 100°C Ends: Dished heads Support type: Legs Number of legs: 4 pcs EQUIPMENT Manhole / Access port: in the top head (DN 600) Outlet: Flange DN100 TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 10 mm Top head wall thickness: 6 mm

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Njdpfxjx Thcmj Adwscl Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: excellent (used), I am selling an industrial table grinder. Price 550€/ for 1 piece. Ncsdpfx Adoud A A Sswol

Condition: used, New: Yes Field of application: Mining Power: 110 kW (150 HP) Empty weight: 35.000 kg Dimensions (LxBxH): 700 x 240 x 240 cm Engine type: V-type Volume of the tank: 20 m^3 Ncjdpfjx D Dagjx Adwol Productivity: 400 tph Log(Blade) Washer(With SKF AUTOMATIC LUBRICATION) Model : LW25 Machine Size : 2000 X 7000 X 2 (Double row) Drive System : 2 X 55 kW Feeding Size : 0 - 50mm Main Body : It is Manufactured ST37 A1 Quality 8mm Sheet as Twisted er Sheet to Which the Front Reducer Group is Connected Will be Manufactured From 12 mm Sheet Metal. Helice: Double Row Carrier Spiral Spoons ST 37 are Manufactured From 8 mm Sheet and the Arms Against Wear Will be Covered With Casting, Helices Will be Hardox Coated. Shaft : Made of Cr-Ni-Mo Alloy Steel. Housing : GS52 Steel Casting Parts Used. Bearing : SKF or FAG Mark Heavy Duty Spherical Roller Bearings.

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) Ncsdpfx Asycxgmodwol * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: used, mileage: 7,50,000 km, power: 375 kW (509.86 HP), first registration: 06/2015, fuel type: diesel, number of seats: 81, gearing type: automatic, emission class: euro6, color: red, brakes: retarder, Equipment: ABS, electronic stability program (ESP), 81 seats New clutch New gearbox Mercus has over 15 years of expirence in bus manufacturing, it`s the biggest producer in Poland. We offer a wide range of ready to go vehicles, over 100 new buses in our car park. All needed documentation to register our bus in your country. Nsdpfxoyc I E Ej Adwscl TAX FOR EXPORT 0% Contact: , Marcin Opon (English, Polish, Russian)

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate Njdjb A Nbnjpfx Adwocl -Weight: 1050 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg Nsdjycck Ajpfx Adwscl

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total height: 890 mm, total width: 630 mm, total length: 1,000 mm, overall weight: 190 kg, Granite measuring table / surface plate by Planolith in very good condition. 1000 x 630 x 890 mm (L/W/H) Nodpfjya Dhqjx Adwocl

Year of construction: 1996, condition: not inspected (used), functionality: unexamined, FOM double-head saw for aluminum, plastic, and wood - one head electic drive - saw diameter 400mm - total length 4800mm Ncedpfsycv Nxsx Adwjl - maximum saw approximately 4000mm The machine worked until the end. After unplugging, it was tested and working. It may require minor repairs (air leaks). You can inspect it on-site at our company in Poland. We can send a video of the machine in operation. We can assist with transport.

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load Ncsdpfjhlnzksx Adwjl - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: ready for operation (used), Year of construction: 2002, This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine. Application Types Ncsdpfx Asx D Iq Njdwol Edge Banding

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Ncedpfx Aovut Hnjdwol Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 1990, pressure 200 t distance between columns 1400 mm Ncodpfxjvut T Is Adwsl stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1300 x 1100 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 700 x 700 mm capacity of ejector in ram 10 t ejector stroke in ram 50 mm table height over floor 930 mm side window 770 mm ram surface 1300 x 1100 mm speed down 400 mm/s speed up 410 mm/s working speed 20 - 50 mm/s return capacity 30 t oil volume 1350 l power requirement 70,0 kW weight 23,0 t dimensions (WxDxH) 4,5 x 3,0 x 3,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, controllable dependent on pressure/time and way, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 2003, Pressure 50 t stroke 800 mm distance between columns 2250 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2250 x 1200 mm Ram surface 2250 x 1200 mm feed down 350 mm/s feed up 190 mm/s working feed 27,5 mm/s oil volume 800 l power requirement 24,2 kW Weight 13,0 t dimensions of the machine ca. 3,75 x 2,75 x 4,67 mxmxm permitted for manual loading according to the CE-norm Nsdpfx Asvuun Hodwscl with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic ram interlocking (Sitema), light guard with active start

Condition: used, Year of construction: 1991, pressure 500 t distance between columns 1910 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 700 mm table surfache without cutting impact cushions 1910 x 1360 mm table surfache with cutting impact cushions 1600 x 1360 mm table height over floor 800 mm ram surface 1600 x 1270 mm Side window 600 mm speed down 400 mm/s speed up 330 mm/s Nsdpevuuiqefx Adwjcl working speed 10 - 28 mm/s oil volume 1200 l power requirement 60,0 kW weight 40,0 t Dimensions (WxDxH) 3,6 x 2,5 x 5,0 m height over floor 4,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, cutting impact cushioning, two-hand operation table size depending on cutting impact devices: - without approx. 1910 x 1360 mm - with approx. 1600 x 1360 mm can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F