Used Lever Plate Shear for sale (13,825)

Condition: new, Lever-action shear for cutting sheet metal, flat steel, round steel, and square steel. Ledpega T Hnjfx Ahtjhk Working length: 200 mm Plate thickness: 5 mm Flat steel: 70 x 5 mm Round steel: 13 mm Weight: 19 kg

Condition: new, sheet length: 1.020sheet thickness: 1,5total power requirements: -weight approx.: 450messurements (LxWxH): 2000 x 850 x 1500 Lhsdpfx Ahsd Ab Hbstsk

Condition: used, Hand lever shears VEB Scherenbau Nossen type ScDH10 Blade length: 180 mm Sheet thickness: max. 10 mm Flat material: 50x15 mm square solid material: 22x22 mm Ljdpfeuqrabex Ahtjhk Round steel: 24 mm Angle steel: 60x7mm T-steel: 60x7mm on mobile base frame Own weight: approx. 150 kg

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Ljdpfxjvkbrqs Ahtohk Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Ledpfjxc Nikox Ahtohk

Condition: used, Year of construction: 1997, cutting length 2000 mm Lhedeztfv Uspfx Ahtjk sheet thickness - max. 6 mm operating pressure 250 bar fabric-no. S2669 weight of the machine ca. 4,7 t working width 2059 mm

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm Ledpfeu Icqaex Ahtshk machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: used, Year of construction: 1990, plate thickness 5 mm Lodpjztf Azefx Ahtshk cutting length 3000 mm rear stop 750 mm total power requirement 7,5-10 kW weight of the machine ca. 4 t

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m Lodpfeww Nccex Ahtehk voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1998, plate thickness 16 mm cutting length 4075 mm weight 23 t Ljdpfx Aeztfvnohtshk output 45 kw

Condition: used, blade length oben 211/unten 180 mm plate thickness max. 6 mm round bar steel max. 13 mm weight ca. 19 kg Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm. Lhjdpjxbtrmjfx Ahtek With compound action. Cuts sheet metals and round steel bar. Colour: Red-brown

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1172, Offer 23443 Technical data: Lhjdpfsrckh Sex Ahtek - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30 ° - Cutting gap adjustment by hand - Projection 200 mm - Manual backgauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirement incl. backgauge - approx. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Year of construction: 1994, condition: ready for operation (used), A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Lhedpey R Drfefx Ahtjk

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm Lhjdpfxot Ucgas Ahtok - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Lhedpfxezukrqo Ahtok

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Lhsdpfxouddh As Ahtsk Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2708, Offer 23478 Lsdpfxsq R T U Ds Ahtohk Technical data: - max. working width 3030 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustment - Cutting gap adjustment - Number of hydraulic hold-down devices 17 pcs - Motorized backgauge with positioning control ELGO 10 - 950 mm - Back gauge with safety guard - front angle fence + 2 support arms - max. stroke rate at max. cutting length 13 per/min - Hydraulic drive 400 V / 11 kW - Table height mm - Space requirement incl. back gauge, without front support arms, without safety guard - approx. W 3800 x H 1840 x D 2350 mm - Weight approx. 7500 kg

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Technical data: - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min - drive 400 V / 45 kW - table height 700 mm Ledpjvmmrujfx Ahtjhk - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch - cutting line lighting

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 800 h, control type: NC control, controller manufacturer: Delem, controller model: DAC-362, working width: 4,050 mm, sheet thickness (max.): 10 mm, Delem DAC-362 NC-control programmable limit stop automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Ledszkty Aopfx Ahtohk

Condition: good (used), Year of construction: 1997, machine/vehicle number: 607697782, Offer 23220 Technical Data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.3 - 3° - Manual adjustment of the cutting gap - Number of hydraulic clamping cylinders 17 pcs - Motor-controlled rear stop 20 - 700 mm - Front angle stop + support arms - Stroke rate depending on the cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height approx. 900 mm - Space requirement including rear stop, without front support arms - approx. W 3700 x H 1850 x D 2250 mm - Weight approx. 5800 kg - Including: - E-foot switch - Cutting line illumination Lsdpfx Ajzqdcbehtshk - Cutting length preselection via potentiometer - Machine rear with light curtain safety

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° Lodpfx Ahox A Tpnetehk - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. Ljdpfx Aet Tqkdohtjhk cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: excellent (used), Year of construction: 1999, AMADA MODEL GPN 840 HYDRAULIC SHEAR MAXIMUM CUTTING LENGTH 4000 mm MAXIMUM THICKNESS M.S. 45 kg/mm/2 8 mm MAXIMUM THICKNESS S.S. 60/kg/mm2 6 mm STROKES PER. MIN 10 - 35 BACK GAUGE RANGE 10 - 1000 mm MOTOR SIZE 15 KW MACHINE WEIGHT 10100 kg STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 1.5 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORT SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER AUTOMATIC SHEARING CONTACTS IN BACK GAUGE Lhsdjtrkmnjpfx Ahtjk BLADE GAP AND RAKE ANGLE ADJUSTMENT FRONT FLIP STOPS ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE WORK CHUTE HOUR COUNTER AUTO-DIAGNOSTICS

Condition: good (used), Year of construction: 2009, machine/vehicle number: 150042, Offer 25328 Technical Data: - Max. cutting width: 3200 mm - Max. cutting capacity at 45 Kp/mm²: 12 mm - Frame throat depth: 175 mm - Cutting angle: 1.48° - Manual blade gap adjustment - Number of hold-downs: 13 units - Strokes per minute: up to 10 1/min - Front squaring arm approx.: 1100 mm - 2 front support arms approx.: 1100 mm each - Motorized back gauge with positioning control up to: 1000 mm - Rear area safety with light barrier - Cutting line illumination - Working height: 860 mm - Electric foot pedal - Drive: 400 V / 19.5 kW Ljdjxl Rypopfx Ahtjhk - Space requirements (approx.): W 4150 x H 2150 x D 2300 mm - Weight (approx.): 8.5 t

Condition: used, Year of construction: 2019, sheet width 6080 mm plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication Lhsdjzvq Etopfx Ahtsk - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device