Used Double Printing Press for sale (37,368)

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds Iiodpfx Asv Srfwjabeh - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm Iiedpfowx R Rdox Aabjh ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 1,600 mm, pressing force: 250 t, stroke adjustment: 120 mm, distance table to quill: 460 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body • Pneumatic clutch brake • T-channel additional additional plate • 8 Bearing rams • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano type control panel • Touch LCD screen • Motor reverse movement • Overload hydraulic fuse • Motorized ram adjustment mechanism • Photocell protection curtain • Gear group in closed oil chamber • Double coil safety valve • Compliance with CE Standards • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. • WE PRODUCE H TYPES FROM 150 TONS TO 2000 TONS. • COUNTRY OF ORIGIN: Türkiye • WARRANTY PERIOD: 24 MONTHS • DEADLINE PERIOD: WILL BE SPECIFIED IN THE OFFER. TECHNICAL SPECIFICATIONS: Ijdpevtw Adofx Aaboih PRESSURE (TON) 250 STROKE (MM) 220 REVOLUTION (D/D) 30-45 TABLE-RAM RANGE (MM) 800 TABLE DIMENSIONS (MM) 2400X1100 MAXIMUM MOLD HEIGHT (MM) 580 REGULATION DISTANCE (MM) 180 SIDE WINDOW WIDTH (MM) 700 MOTOR POWER (KW) 22 WEIGHT (KG) 33000 MACHINE DIMENSIONS (MM) SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED ACCORDING TO YOUR REQUESTS

Condition: good (used), Year of construction: 1993, machine/vehicle number: 709661, Size 35 x 52 cm, Alcolor dampening, Technotrans cooling and recirculation unit, Weko T66 powderspray, Plus version Machine no.: 709661 Ijdpfxjw Inu Rs Aabsih

Condition: used, Year of construction: 1979, functionality: fully functional, Slotter, Gandoss&fossatti, year 1979. Format 2650x1350. Skipfeed 1750. Vacuum stacker (Becker pump). Two flexo colors. Automatic feed with additional tools for handles and holes. Stacker. Iiodow N Nhujpfx Aabsh

Condition: excellent (used), Manufacturer: ROVETTA Model: S4-600 Year: 2002 Condition: Used Stock number: 0363-0364-0365-0366 Pressing force: 800 tons Number of connecting rods: 4 Drive mechanism: LINK DRIVE Ram stroke: 900 mm Ram adjustment: 500 mm Isdpfx Aew Hci Ieabjih Ram dimensions: 4,500 x 2,300 mm Table dimensions: 4,500 x 2,300 mm Lateral opening in frame: 2,450 mm Usable front passage: 4,500 mm Die space at BDC: max. 1,500 mm, min. 1,000 mm Hydraulic safety device: Present Side removable carriage: Present

Condition: used, Double-column punching press EBU - Eisenwerk Hensel Type HK 130 Z Eccentric punching press, eccentric press Mach. No. P 54096 / 96, built in 1996 Pressure force 130 tons Table size 1200 x 880 mm Stroke adjustment 8 to 140 mm Ram adjustment 100 mm Ram surface 1150 x 800 mm Table opening (support edge) 450 x 350 mm Table opening (through hole) 440 x 235 mm Column width 1200 mm Column width across 595 mm Installation height of maximum stroke of ram at TDC max. 510 mm (ram adjustment at top) Installation height of maximum stroke of ram at BDC max. 370 mm (ram adjustment at top) Stroke rate 40-120 strokes/min. Table height above floor: 900 mm Main drive motor power: 15 kW Hydraulic motor power: 2.2 kW Total current consumption: 40 amps Power supply: 400 volts, 50 Hz - Hydraulically operated multi-disk wet clutch and spring-loaded safety brake - Continuously adjustable drive via frequency converter (120 strokes at 80 Hz) - Hydraulic overload protection - Automated stroke adjustment - Motorized ram height adjustment with digital actual value display - Pneumatic, continuously adjustable ram weight counterbalance - Electrical cabinet adjacent (120 x 40 cm x height 220 cm) - Electric two-hand operation for stroke release - Movable Plexiglas safety door on the operator side, with pneumatic opening - Lubrication unit for circulating oil lubrication (fixed to the machine) - Hydraulic unit for the clutch-brake combination (fixed to the machine) Machine) - UNIDOR APS-Mini tool monitoring system, shown opposite - Operating instructions and documentation for the press available as PDF - Electrical circuit diagram available Included: EBU roller feed unit, type EVS 320 Order No.: ZT01054949 / 96, built in 1996 Strip width: 320 mm Strip thickness: max. 4 mm Strip cross-section: max. 1000 mm² - Feed control via the SIEMENS machine control system Isdswa D Npepfx Aaboih - Programmable feed path from the roller feed system - Control panel for feed system with Siemens S5 control system with OP 15, shown opposite Space requirement for press with feed system: L x W x H 380 x 180 x 375 cm Space requirement for control cabinet: L x W x H 125 x 41 x 200 cm, approx. 450 kg Transport dimensions of the machine with control cabinet and disassembled drive motor: L x W x H 400 x 230 x 343 cm Height with drive motor: 375 cm Height without drive motor: approx. 343 cm Weight: 18 tons Good condition

Condition: good (used), Year of construction: 2011, product width (max.): 1,250 mm, working width: 1,200 mm, 8 color Printing Width (max): 1250 mm Web Width (max): 1200 mm Printing Repeat: from 370 mm to 850 mm Mechanical Speed (max): 300 m/min Iiedpfx Aaew Adz Robjh Substrate Types: plastic films (LDPE, HDPE, PET, BOPP), paper, aluminum foil Unwinder/Rewinder Diameter: up to 1000 mm Inking & Doctor Blade System Drying System Web Guiding and Tension Control Automatic web guide at unwinder Electronic tension control on unwind and rewind units Register Control Automatic longitudinal and transversal register adjustment Job memory for repeat orders Reel Handling Shaftless unwinder and rewinder Integrated lift for easy roll handling Control Panel Centralized touchscreen HMI PLC with diagnostic and job recall functions Suitable for: Flexible packaging (food and non-food) Laminates and labels Film for industrial use Paper and foil printing Material Thickness: 12 – 150 μm

Condition: new, Year of construction: 2025, pressing force: 400 t, table width: 1,200 mm, table length: 2,500 mm, retraction force: 200 t, Equipment: safety light barrier, FOR 400/200 TON H TYPE HYDRAULIC PLASTERING PRESS TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8 SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR SLIDE BEARING KESTLUB CAPACITY (RAM) 400 TON CAPACITY (POT) 200 TON MOVABLE TABLE DIMENSIONS 1200 x 1500 mm FIXED TABLE TABLE DIMENSIONS 1200 x 1500 mm Iodev Dvv Repfx Aaboih LOWER EXTRACTOR TABLE DIMENSIONS 1050 x 1330 mm PARALLELITY TOLERANCE 120 micron/mt. HORIZONTAL TOLERANCE 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. INTERMEDIATE SPACE 200 mm MAX. INTERMEDIATE SPACE 1200 mm WELDING STRESS RELIEF Stress relief by vibration WELDING APPLICATION - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) PROPORTIONAL SPEED and PRESSURE APPLICATION The system is designed as proportional speed and pressure feature. By entering different speed, stop and pressure values at different points of the pressing process, the effect of material and mold deformations on the work done is minimized. MAX. WORKING PRESSURE 250 Bar – Adjustable from Proportional Screen TOTAL MOTOR POWER 37 kW– IE3 MAIN PUMP 140 cm³ – REXROTH – Piston Power Regulated MOVING TABLE FAST Descent Speed 50 ~ 400 mm/sec. – Adjustable from Proportional Screen MOVING TABLE PLASTERING Speed 5 ~ 21 mm/sec. – Adjustable from Proportional Screen MOVING TABLE RETURN SPEED 50 ~ 450 mm/sec. – Adjustable from Proportional Screen POT TABLE FAST Descent Speed 10 ~ 40 mm/sec. – Adjustable from Proportional Screen POT TABLE RETURN SPEED 10 ~ 70 mm/sec. – Adjustable from Proportional Screen MAIN CYLINDER INNER DIAMETER Ø 450 / Ø 390 mm – Ck45 POT CYLINDER INNER DIAMETER Ø 320 / Ø 250 mm – Ck45 AUXILIARY ACCELERATOR CYLINDERS Ø 80 / Ø 50 mm – Ck45 APPROXIMATE HEIGHT OF PRESS 5600 mm APPROXIMATE WIDTH OF PRESS 3250 mm APPROXIMATE DEPTH OF PRESS 2200 mm LOWER TABLE HEIGHT FROM THE GROUND 1400 mm PRESS SIDE WINDOW DIMENSIONS 500 x 1300 mm PRE-FILL VALVE NG 200 – hawe HYDRAULIC UNIT REXROTH COOLING SYSTEM SUCTION – CIESSE OFF-LINE FILTRATION REXROTH ENGINE CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR REXROTH AIR FILTER REXROTH – 10 MICRON PERMEABILITY RETURN FILTER REXROTH – 25 MICRON PERMEABILITY OIL AND HEAT INDICATOR REXROTH VALVES USED REXROTH FILTER CONTAMINATION WARNING ELECTRONIC CONTROLLED LUBRICATING STYLE AUTOMATIC – (ADJUSTABLE FROM THE SCREEN) RAM STROKE ADJUSTABLE FROM THE SCREEN POT STROKE ADJUSTABLE FROM THE SCREEN RAM TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN POT TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE VISIBLE ON THE SCREEN PRESS STATUS INFORMATION CAN BE VISIBLE ON THE SCREEN MOLD MEMORY CAN BE ADJUSTED FROM THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE VISIBLE ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. PARKER or ORDEL PLC APPLICATION DELTA TOUCH PANEL SCREEN DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER RADIATION BARRIERS KEYENCE, LEUZE, PILZ or SICK – 2 tk. APPROXIMATE WEIGHT 25 TONS

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Ijdpfx Aohlnzksaboih Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System Unwinder with constant web tension control Web alignment and stabilization unit Electronically controlled infeed with precise tension management Complete drive system for accurate web handling 2. Rewinding System Single-shaft rewinder, max diameter: 1000 mm Constant tension control for stable winding 3. Surface Treatment & Web Cleaning Corona treatment unit for surface energy optimization (pre-print treatment) ACE single-side contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section 8 flexo printing units with: Print drum Removable inking drawer (excluding anilox rollers) Optional features for flexo units: Explosion-proof configuration (applied per printing unit) Drum cooling system Lightweight anilox rollers: 5 units (195–300 lpi) with gear 5 units (>300 lpi) with gear 24 printing sleeves with cams 2 additional ink drawers (tray + rubber roller) 1 trolley for ink drawers (3 slots – 2 active + 1 spare) Special Flexo Units 1 cold foil trolley 1 sliding cold foil unit (movable to any print station, rail-free design) Iisdpfx Aaowya Tkeboh Rotogravure Printing Section 1 rotogravure unit for front-side or reverse-side printing, equipped with: Tilting bar for reverse (back) printing Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) Rotogravure trolley for mobile positioning Extended hot air drying system: “Super Hood” with 32 high-efficiency blowers Heating via methane gas burner Integrated cooling unit Electrostatic assist system for ink transfer 3 rotogravure printing formats (16”–26”) Solvent ink viscometer Pump and ink supply tank 5. Drying and UV Curing Systems 8 UV curing units, 22 kW each, one per print station Integrated cooling system for UV lamps Drum cooling for temperature-sensitive substrates 6. Die-Cutting and Finishing Units Rotary die-cutting unit, working width up to 530 mm Base for die-cutting station Trim removal system (up to 530 mm width) Scrap pressure system (limit 530 mm) 7. Slitting Section Scissor-type slitting system 6 Helios box-type knives with self-sharpening counter blades

Condition: new, Year of construction: 2025, pressing force: 320 t, table width: 1,200 mm, table length: 1,200 mm, retraction force: 140 t, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE DELIVERY FROM STOCK H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS – EHSP o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 320 TONS CAPACITY (POT) 140 TONS MAIN TABLE SIZE 1200 x 1200 mm MOVING TABLE (RAM) SIZE 1200 x 1200 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. OPENING HEIGHT 300 mm MAX. OPENING HEIGHT 1300 mm STRESS RELIEF afer WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) PROPORTIONAL SPEED AND PRESSURE APPLICATION The system is designed as proportional speed and pressure feature. At different points of the pressing process, different speed, stop and pressure values are entered and the effect of material and mold deformations on the work is minimized with proportional precision. MAX. PRESSURE 250 Bar – Proportionally adjustable ENGINE POWER 37 KW – IE3 PUMP FLOW RATE 70 cm³ – REXROTH FREE FALLING SPEED 50 ~ 600 mm/sec. – Proportionally adjustable PRESSING SPEED 10 ~ 72 mm/sec. – Proportionally adjustable ASCENDING SPEED 90 ~ 750 mm/sec. – Proportionally adjustable DIE-CUSHION WITH SPEED – UP 50 ~ 190 mm/sec. – Proportionally adjustable MAIN CYLINDER DIAMETER Ø380 mm – Ck45 POT CYLINDER DIAMETER Ø270 mm – Ck45 AUXILIARY CYLINDER NUMBER Ø100/60 mm Ck45 – 2 pc. PRESS HEIGHT 7300 mm PRESS DEPTH 2040 mm PRESS WIDTH 1400 mm TABLE HEIGHT FROM FLOOR 1630 mm PRESS SIDE WINDOW SIZE 500x1685 mm Isdpfx Aevx T Hpeabsih PRE-FILLING VALVE NG 200 – hawe HYDRAULIC UNIT REXROTH WET COOLING EXCHANGER CIESSE OFF-LINE FILTRATION REXROTH CIRCILATION MOTOR PUMP REXROTH – 3 kW ENGINE USED IN THE UNIT IE3 LEVEL INDICATOR REXROTH FAN COOLING REXROTH – 10 MICRON PRESSURE FILTER REXROTH – 10 MICRON RETURN FILTER REXROTH – 25 MICRON OIL AND HEAT INDICATOR REXROTH USED VALVES REXROTH FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATINON ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC FORGET OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. PLC DELTA TOUCHSCREEN DELTA KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY LIGHT CURTAINS KEYENCE, LEUZE, PILZ or SICK – 2 pcs. APPROXIMATE WEIGHT 27 TONS

Condition: used, Double-acting hydraulic cylinder HÄNCHEN type Servoslide Flange cylinder, ideal for workshop press Serial no.: S004420 Year of manufacture 2010 Cylinder stroke: 400 mm Operating pressure: 300 bar Piston rod: Ø 160 mm Piston diameter: Ø 220 mm Cylinder pressing force at 300 bar: 114 tons Flange outer diameter: approx. 400 mm with 16 holes Ø 24.5 mm Total length of piston rod retracted: approx. 1230 mm (with the force sensor) Total length from flange to top of cylinder: approx. 750 mm - Hydraulic connection thread G 1 1/4 " - Thread on the piston rod M150 x 3 mm (on the force sensor) - Piston rod guide system with plastic guide "Servoslide" Iijdpfxevcrwho Aabsh - Mounting flange Ø 400 mm with 16 holes Ø 24.5 mm - Force transducer HOTTINGER Messtechnik, FORCE Transducer Type C6A Own weight: 450 kg comes from a warehouse clearance and is in very good condition

Condition: used, Year of construction: 2005, Web handling system with web guide, web cleaning, and corona treatment unit 1 screen printing unit (semi-rotary) 5 offset printing units (semi-rotary) 1 hot foil stamping unit (semi-rotary) 1 additional screen printing unit (semi-rotary) 1 embossing unit (flatbed) 1 flatbed die-cutting unit Matrix stripping and dual rewinding system Iodpfx Aswvv H Sjabjih A complete overhaul was carried out in 2017, including full mechanical and electronic refurbishment. Replacement and upgrade of the control system to Version 3

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,500 mm, pressing force: 315 t, stroke adjustment: 40 mm, warranty duration: 24 months, lifting height: 820 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body • Pneumatic clutch brake • T-channel additional additional plate • 8 Bearing rams • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano type control panel • Touch LCD screen • Motor reverse movement • Overload hydraulic fuse • Motorized ram adjustment mechanism • Photocell protection curtain • Gear group in closed oil chamber • Double coil safety valve • Compliance with CE Standards • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. • WE PRODUCE H TYPES FROM 150 TONS TO 2000 TONS. • COUNTRY OF ORIGIN: Türkiye • WARRANTY PERIOD: 24 MONTHS • DEADLINE PERIOD: WILL BE SPECIFIED IN THE OFFER. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 300 STROKE (MM) 220 REVOLUTION (D/D) 24-40 TABLE-RAM RANGE (MM) 820 Iiedpfevtw Awjx Aaboh TABLE DIMENSIONS (MM) 1200X2500 MINIMUM MOLD HEIGHT (MM) 450 REGULATION DISTANCE (MM) 150 SIDE WINDOW WIDTH (MM) 700 MOTOR POWER (KW) 30 WEIGHT (KG) 39000 MACHINE DIMENSIONS (MM) 4700X3500X2000 SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED ACCORDING TO YOUR REQUESTS

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Iedsdzp Tcjpfx Aabeih Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: good (used), Year of construction: 2015, Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm if not specified otherwise for optional accessories Air core diameter 76.510 mm Repeat steel lock 310 mm Max. print length 600 mm OPERATION EFFICIENCY Max. mechanic speed 300 m/min Iisdpfx Aetuc R Hjabjh FALCON - automatic setting of print registers and impressions Sophisticated system for print control FAST BLADE - system for doctor blade exchange in the machine INKSTORM - automatic wash-up system (option) Bosh Rexroth INDRAMAT direct drive technology JOB MANAGEMENT - preparation of future jobs from remote PC PRINT QUALITY CDTS - central drum thermal stabilization system DYNAMIC IMPRESSION - printing deck impression electronic compensation system Machine design with emphasis on high printing stability Composite graphite cores (option) EASY OPERATION Intuitive touch display (Touch Screen) Easy access to web path Doctor blade chambers with FAST BLADE system for blade quick exchange in the FASTBLADE machine FASTADAPT - doctor blade chamber position automatic adaptation CORONA, AHLBRANDT - 4 kW Side control before printing Printing unit 8-printing deck unit Central drum with diameter of 1,450 mm Gas dying system Printed material cooling unit Unit with cooling cylinder and servo drive Web guiding system prior to the rewind unit Web fault control system BST SUPER HANDY SCAN 4000 chip digital camera Rewind unit NONSTOP 800 rewind unit For roll max. diameter of 800 mm Roll clamping using pneumatic expansion shaft

Condition: new, Year of construction: 2025, table width: 900 mm, table length: 1,300 mm, pressing force: 200 t, stroke adjustment: 100 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body • Pneumatic clutch brake • T-channel additional additional plate Iedpfx Asvtwz Toaboih • 8 Bearing rams • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano type control panel • Touch LCD screen • Motor reverse movement • Overload hydraulic fuse • Motorized ram adjustment mechanism • Photocell protection curtain • Gear group in closed oil chamber • Double coil safety valve • Compliance with CE Standards • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • DEADLINE PERIOD: WILL BE SPECIFIED IN THE OFFER. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 200 STROKE (MM) 180 REVOLUTION (D/D) 38-45 TABLE-RAM RANGE (MM) 680 TABLE DIMENSIONS (MM) 1000X2000 MAXIMUM MOLD HEIGHT (MM) 500 REGULATION DISTANCE (MM) 120 SIDE WINDOW WIDTH (MM) 600 MOTOR POWER (KW) 22 WEIGHT (KG) 28000 MACHINE DIMENSIONS (MM) 4000X2000X3000 SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED ACCORDING TO YOUR REQUESTS

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram Iiedpfedzqlvjx Aabsh - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: used, Year of construction: 2010, 10 UV Printing units 1 x Unwinder 1 x Turnbars 4 x Delam – Relam in 1, 2, 3, 4 Printing Units 1 x Double-Layer Station 2 x Hot Air dryer in printing units 1 and 10 1 x Web cleaner 1 x Web Coronation unit, 1 x Die-cutting unit with Gapmaster and Label Shifting Unit 1 x Inspection unit (Video system BST) 1 x Edge trimming 1 x Top-conveyor for endless removal of the matrix after the die-cutting Iiedpfx Aov Rmr Asabjh 1 x Cold lamination unit -- Unwinder and rewinder placeable in units 1-10 1 x Rewinder

Condition: new, Year of construction: 2025, table width: 900 mm, table length: 1,300 mm, pressing force: 150 t, stroke adjustment: 100 mm, distance table to quill: 400 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body Iedpfjvtwztsx Aaboih • Pneumatic clutch brake • T-channel additional additional plate • 8 Bearing rams • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano type control panel • Touch LCD screen • Motor reverse movement • Overload hydraulic fuse • Motorized ram adjustment mechanism • Photocell protection curtain • Gear group in closed oil chamber • Double coil safety valve • Compliance with CE Standards • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • DEADLINE PERIOD: WILL BE SPECIFIED IN THE OFFER. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 150 STROKE (MM) 100 REVOLUTION (RPM) 60 TABLE-RAM DISTANCE (MM) 400 TABLE DIMENSIONS (MM) 900X1300 MAXIMUM MOLD HEIGHT (MM) 300 REGULATION DISTANCE (MM) 100 SIDE WINDOW WIDTH (MM) 500 MOTOR POWER (KW) 11 WEIGHT (KG) MACHINE DIMENSIONS (MM)

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Iiedpfx Aaodzqptsbeh Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: new, Year of construction: 2025, pressing force: 500 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 175 t, Equipment: safety light barrier, o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system 500/175 TONS H TYPE HYDRAULIC DEEP DRAWING PRESS TECHNICAL SPECIFICATION – EHSP TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 500 TONS CAPACITY (POT) 175 TONS MAIN TABLE SIZE 1200 x 1500 mm MOVING TABLE (RAM) SIZE 1200 x 1500 mm POT TABLE SIZE 1000 x 1200 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. OPENING HEIGHT 100 mm MAX. OPENING HEIGHT 1100 mm STRESS RELIEF afer WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) MAX. PRESSURE 250 Bar ENGINE POWER 37 kW – IE3 PUMP FLOW RATE 101 cm³ – REXROTH FREE FALLING SPEED 180 mm/sec. PRESSING SPEED 10 mm/sec. ASCENDING SPEED 200 mm/sec. DIE-CUSHION WITH SPEED – UP 70 mm/sec. DIE-CUSHION WITH SPEED – DOWN 30 mm/sec. MAIN CYLINDER DIAMETER Ø500 mm – Ck45 POT CYLINDER DIAMETER Ø390 mm – Ck45 AUXILIARY CYLINDER NUMBER 2 Pcs. PRESS HEIGHT 5900 mm PRESS DEPTH 3500 mm PRESS WIDTH 2400 mm TABLE HEIGHT FROM FLOOR 1550 mm PRESS SIDE WINDOW SIZE 500x1000 mm PRE-FILLING VALVE NG 200 HYDRAULIC UNIT REXROTH WET COOLING EXCHANGER EMMEGI – CIESSE OFF-LINE FILTRATION REXROTH ENGINE USED IN THE UNIT IE3 LEVEL INDICATOR REXROTH FAN COOLING REXROTH PRESSURE FILTER REXROTH RETURN FILTER REXROTH OIL AND HEAT INDICATOR REXROTH USED VALVES REXROTH FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATINON ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC FORGET OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN Iedjvtaafepfx Aaboih LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. ORDEL or REXROTH PLC DELTA TOUCHSCREEN DELTA KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY PLC SIEMENS FAILSAFE SAFETY LIGHT CURTAINS KEYENCE, LEUZE, PILZ or SICK – 2 pcs. FEEDBACK VALVES REXROTH – 3 pcs. PARKİN CYLINDER PNEUMATIC – 1 pc. APPROXIMATE WEIGHT – EHSP 30 TONS COUNTRY OF ORIGIN: Türkiye 24 MONTHS WARRANTY

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm Iedpev Srfdefx Aabjih - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter Iedpow A Amrofx Aabsih - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition