Used Double Sided Cantilever Rack for sale (26,393)

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm Fgjdpfx Ajvuugcsa Njb permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm Fjdpfxevuubae Aa Nsgb table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1990, pressure 160 t Fsdpfsyx Ii Dsx Aa Nsgb stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) Fsdpfxjyyya Ds Aa Nogb EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Fgsdoyypi Uspfx Aa Njb Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) SERVO-DRIVE guillotine shear (cutting the edge/band) Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm Fsdpfsxfl Eajx Aa Njgb max. sanding height 200 mm year of manufacture 1994 with CE mark

Condition: used, - Documentation available: No - CE certificate present: No - Number of uprights [pcs]: 15 - Number of beams [pcs]: 16 - Arm length [mm]: 1200 - Upright height [mm]: 3950 - Foot length [mm]: 1500 - Width between uprights [mm]: 1300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Fgjdpfx Aewub H Isa Nob

Condition: used, Year of construction: 1977, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Fgedpfx Aaoyxmule Njb Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Fsdpfx Aaoyilxmj Nsgb Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, Year of construction: 2015, Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Fgodoyw Twkspfx Aa Nob Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton Standard configuration Moving bolster extending forwardsCutting impact bumper dampingSIEMENS S7-300 controller

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Fgsdjyw R Adspfx Aa Njb Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Fodpfx Aajyw Rvqs Njgb Weight of machine approx.: 344 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: like new (used), Almost new cantilever racks, single- and double-sided, available from stock. Loading marks may be visible on the system. Available quantity: 20 pcs System dimensions: Arms: base + 5 arms, 80 cm long Load capacity: 160 kg/upright Uprights: 4 pcs, 2500 mm high, 90 cm upright spacing Fsdpfx Ajxcn Ekoa Negb Load capacity: 1000 kg/upright Total system length: 3300 mm Total system depth: 1100 mm Single-sided: 1090 EUR Double-sided: 2000 EUR

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm Fgsdpfxjd Ixbcs Aa Nob electrical connection: 380 V, 0,55 kW space needed: 530 x 400 x 1180 mm weight:

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed Fodpoyvz U Iefx Aa Nsgb The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 1998, machine/vehicle number: 2 / 2000, Pressure total: 2000 ton Fedpeyvz Stofx Aa Njgb Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: good (used), Cantilever rack OHRA 3 m high Over 100 meters in stock, see pictures. Height: 3 m Arms: 100 cm Load capacity per arm: 800 kg 4.5 running meters, 4 uprights with arms. Negotiation price: €2,360 net Fgodscd Dwyopfx Aa Njb Offer includes: - 4 uprights with base, each 3 m high - 4 adjustable arms per upright, each arm 100 cm, load capacity 800 kg/arm - Diagonal braces, stabilizers, and spacers included - Frame distance: 150 cm - Load capacity per upright/per side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m also available Other configurations available on request. Constant stock of over 3000 lfm pallet racking from various manufacturers. Transport and assembly available on request. (Technical data, specifications, and prices subject to change without notice. Intermediate sale reserved! See our general terms and conditions. All prices excl. VAT, ex stock.) Buying / Selling: We are constantly purchasing and offering numerous items from various sectors: - broom-clean business clearances - company liquidations - fast – flexible – effective! We also clear or dispose for insolvency administrators. Contact us with a brief description and we will get back to you promptly. To visit our page, please click on our logo!

Condition: used, Year of construction: 1985, Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7 Fgsdpsyvkuksfx Aa Neb

Condition: used, overall weight: 208 kg, total length: 400 mm, total width: 400 mm, total height: 470 mm, Erowa ER-051145 FL-AA0324 Double side tooling column with Erowa Mounting holes System Erowa Length 400 mm Width 400 mm Height 470 mm Weight 208 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Fgedjywy U Aepfx Aa Nsb

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: Modell 5003, carrying capacity per cantilever arm: 1,500 kg, shelf height: 3,585 mm, total length: 6,200 mm, total width: 1,520 mm, total height: 3,985 mm, number of shelf rows: 8, Cantilever rack, roll-out, make Lützenkirchen Fgjdpfeyzn S Rjx Aa Nob

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm Fgjdpevuua Nofx Aa Nsb feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm Fgsdevut Uxspfx Aa Njb feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 trolleys: 800x600 mm - Baguette capacity: minimum 360 - Refractory stone (heat accumulator) - Integrated heat recovery unit - Baking surface: 19.2 m² - TOUCHMATIC touch screen control - Voltage: 400V - Power: 4 kW Fgjdpfxjxxanpj Aa Njb - Burner: Gas - ALL-IN-ONE = Rotary rack oven with integrated heat recovery unit - No additional trades required for installation - No electrical consumption by the heat recovery unit, as it is 100% mechanical - No need to connect to BMS (Building Management System)/central heating, no buffer tanks to store hot water - Automatic adjustment with no need for control, monitoring, or complex programming - Truly maintenance-free heat recovery unit - Heat recovery on each burner operating cycle - Long service life equal to that of the oven’s heat exchanger - Primary energy consumption reduced by 20% (oil/gas) - Improved baking results due to faster achievement of target baking temperature after loading - Further primary energy savings thanks to shorter baking times - No downtimes (no reheating periods) for continuous baking - Heat remains where it is produced and needed: in the baking chamber, to bake your delicious products

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Fodpfjyq Avhox Aa Nsgb Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm Fgodpfx Aaoyttrxj Nsb MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561