Used Double Sided Cantilever Rack for sale (31,035)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg Tedpfxofdkb Uo Ac Nsf - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2005, Cantilever rack, two-sided, height 2.90 m, arms 1.20 m each with 2 crossbeams between the arms/levels, ideal for storing goods, e.g., on Euro pallets - used -: Price ex-site: €24,500 (net) including disassembly and loading! Price for partial quantities upon request - minimum order per rack! Manufacturer: Bruckamp Shelving Systems Type: unknown Year of construction: 2005 Maximum load per arm: 2,000 kg Arms bolted Maximum load per upright: 2 x 2,000 kg Tedpfx Acewi I Tdo Nof Outreach per arm: 120 cm (IPE 100 standard) Total height per rack: 2.90 m (IPE 160) Number of uprights: 69 (currently 3 x 23) The center distance between the frames is 1,240 mm. The heights of the middle and top levels are fixed. These could possibly be offset by drilling new holes. There are no pre-drilled holes. Version / Shelf A: Divided into three sections on both sides Version / Shelf B: No middle section Version / Shelf C: Central section only on the right Condition: Good Available: Immediately Location: Schweinfurt / Würzburg area

Condition: new, Year of construction: 2025, SELF-CENTERING PLANER OSI proudly presents the European version of its self-centering planer (SCP-450). For over 20 years, OSI Machinery has supplied this technology to the North American wood industry (Canada, United States). The OSI Machinerie Self-Centering Planer (SCP) optimally utilizes every single board, regardless of defects (bowed, twisted, warped, cracked), significantly increasing yield. The SCP-450 ensures 100% thickness accuracy for all processed elements. It planes the same thickness on both sides of the material. Independent suspension guarantees optimal calibration, enabling precise planing at all times. This patented solution eliminates jams and downtime. The SCP-450 is applicable in a wide range of production environments: • Hardwood lumber • Furniture • Doors and windows • Components • Cabinets • Calibration FEATURES: High yield (maximum material utilization) Opposing horizontal cutterheads Self-centering segmented feed and pressure rollers Minimized snipe and missed planing spots Attainment of maximum possible surface area Thickness accuracy guaranteed to +/- 0.076 mm Elimination of burn marks and depressions Digital thickness readouts Spiral planing heads with replaceable knives Hydro-lock collars on each 76 mm column (4) Maximum feed speed: 50 m/min Board width: 450 mm Board thickness: 4 mm to 130 mm Material removal up to 6 mm (per side) Minimum board length: 600 mm Power to planer heads: 2 x 45 kW Spiral heads: 10 spirals (5+5) Planer head diameter: 150 mm with replaceable 4-sided knives, 15 mm x 15 mm x 2.5 mm Segmented fingers: 32 mm carbide segment fingers function as pressure and anti-kickback devices Tjdpfx Ajww I Iqsc Nof Segmented roller drive power: 4 x 2.25 kW Infeed segmented rollers: 2 x top Outfeed segmented rollers: 2 x bottom Hydro-lock clamping system Voltage: 380 V

Condition: used, TECHNICAL DETAILS - grinding wheel dimensions : 457 x 75 x 76,2 [mm] - lower and upper spindle holder headstock diameter : 457 [mm] - machining capacity width : 10-60 [mm] - work height with a new grinding wheel : 95 [mm] - upper grinding wheel rotation speed : 251-1254 [Rpm] - lower grinding wheel rotation speed : 251-1254 [Rpm] - tangential speed upper grinding wheel : 6-30 [m/sec] Todpfx Acju Hagpo Nsf - tangential speed lower grinding wheel : 6-30 [m/sec] - part feed speed : 21 to 215 [m/s] - tension / frequency : 380 [V] / 50 [Hz] - intensity : 70 [A] - motor power : 2 x 11 [kW] - power : 35 [kW] - machine weight : 4700 [kg] - floor space (LxDxH) : 3700 x 2000 x 2550 [mm] EQUIPMENT - trueing device

Condition: good (used), Year of construction: 1998, functionality: fully functional, Stefani Ibimatic Double Edge Bander Year 1998 S/N NH 002993 Manufacture StefaniS.p.A. Italy Edge banding min / max 14-65mm Thickness min 0,3mm Max size of ABS 3 x 35mm Panel thickness min/ max 60mm Panel size 220- 3200mm Working edge 30-75mm Distance between the edges 400mm Adjustable feed speed from 6 to 36 m/min Units: Tedotrgy Nepfx Ac Nef 1+1 front milling units, 4 kW, pneumatic 1+1 air blast for cleaning the workpieces 1+1 gluing station / hot melt adhesive unit GR_HMP-P HM-P GLUING UNIT FOR STRAIGHT EDGES The device is designed for gluing straight edges using a thermo-meltable adhesive with a removable container container and a premelter for quick melting The unit includes A Glue container B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shears F Side pusher G Inclination of the glue unit H Mobile table top 1+1 feeding device for edge trims, 5 stations 1+1 head cutting unit, 0.35 kW, 12,000 rpm 1+1 equalizing unit, 1 kW, 12,000 rpm 1+1 chamfer trimming unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 head rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side empty space ( U28+U55), diameter 125mm- RPM 12,000 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0,29 kW, 1500 rpm SPO ( 150/50x 50mm ) 1+1 ABS strip color brightener, 1600 W

Condition: good (used), Year of construction: 2001, Angular interlinked double-sided grinder with washing machine and automatic dryer Grinding and polishing function, A total of 40 spindle motors, Connected load: 160 kW / 400 V / 50 Hz, Rated current: 265 A, Tsdpfx Acorci Uxe Nof Max. Glass size: 3500 x 1800 mm, Min. glass size: 350 x 200 mm, Glass thickness: 4 to 10 mm.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable Tedpjfdkbhefx Ac Njf - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2020, Cantilever rack, one-sided, 6.30m high, 1.20m arms, 900kg per arm - new - : Price ex location incl. loading! 1 shelving unit with 4 uprights 3.732.-€ (net)! Transportation costs within Germany (without islands): 490.-€ (net)! One cantilever shelving system, hot-dip galvanized, consisting of: Shelving upright, one-sided approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center 600 mm 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level 4 x 900 kg = 3,600 kg Tjdpfx Acefivg Sj Nsf Profiles: Frame: IPE220, arms: IPE 100 with longitudinal and diagonal bracing e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all nuts and bolts (dispatch within Germany by parcel direct from Würth), without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) available! Please contact us!

Condition: new, OHRA cantilever rack Negotiated price: € 5.940,00 net ex stock You are bidding on a rack with a length of 7.5 m, consisting of 6 uprights with base, 6 m high + 4 adjustable outriggers per upright (120 cm), load capacity 900 kg/outrigger. Diagonal bracing, stiffeners and spacers are included. Bridges, grids and chipboards are available separately at an extra charge! Frame spacing 150 cm Arm length / outrigger 120 cm Load capacity 900 kg / outrigger Load capacity per upright per side 3,600 kg Over 100 meters available. Tedpfsby Uunsx Ac Nsf Heights of 2.5 m, 3 m or 4 m available. Other combinations on request. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous items from various areas Machines from all industries Remaining stock Special items swept clean company clearances Business liquidations Purchase of remaining stock Fast - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with a few keywords and we will get back to you as soon as possible.

Condition: excellent (used), Knopp Duplex glass drilling machine double-sided. Year of manufacture 2000 In good condition. With ball roller table, cross laser and infinitely variable speed control. Tjdpfx Acoq Umcno Nef Incl water cooling

Condition: new, Year of construction: 2022, Jungheinrich, Kongamek support arm trolley Drying boards for carpenters or joiners Jungheinrich article number: 167793-4A several available 3 packages, can be sent 14 layers Support arm diameter 20mm Installation height 1770mm External dimensions height 1960mm and length 1520mm Frame width and external dimensions depth 860mm Load capacity per level 20kg Own weight 73mm Todpfx Acsvntzxo Njf Delivered disassembled

Condition: excellent (used), carrying capacity per cantilever arm: 330 kg, shelf height: 2,500 mm, axle spacing: 1,250 mm, shelf length: 5,200 mm, Cantilever racking H 2500 mm Manufacturer: BITO Length: approx. 5.2 meters Height: 2500 mm Load per arm: 330 kg Cantilever arms, length 600 mm Distance between uprights: approx. 1250 mm Total depth of racking: 1340 mm The cantilever rack consists of: * 5 uprights with base, made from IPE 140 profile, upright height 2500 mm * 35 cantilever arms, length 600 mm, load per arm 330 kg * Diagonal braces, bolts, connectors Total weight: approx. 500 kg Price: 1,000 euros net 2 sets available Todpfx Acewzzrqo Nsf

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Tedpfx Ajmhhyaoc Njf - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, pressure 75 t stroke 8-80 mm Tjdpfx Acjvfxl Rj Nef no. of strokes 80-200 Hub/min ram - range of adjustment 70 mm table surface area 900x600 mm ram surface 900x470 mm hole in the table 450x180 mm dist. between columns - front to rear 500x350 mm dist. between pillars (front to rear) 788 mm total power requirement 10 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1600x1200x2800 mm

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Tsdpsmhhx Iefx Ac Nsf - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t Tedpsrdi Dlofx Ac Nof

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Tedpfxed Tbbde Ac Njf Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 1993, condition: used, pressure 63 t stroke 10-80 mm no. of strokes 65-400 Hub/min ram - range of adjustment 80 mm table surface area 1030x550 mm Todpfjlp U E Rox Ac Nof ram surface 920x450 mm hole in the table 700x200 mm 420 mm weight of the machine ca. 10 t

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: Tjdpfxemidyfs Ac Nef - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Year of construction: 1981, condition: used, pressure 20 t stroke 8-38 mm no. of strokes 100-1800 Hub/min table surface area 400x400 mm table pass 380x80 mm table height 1000 mm weight of the machine ca. 4 t Tjdpfx Acelp U Nme Nof dimensions of the machine ca. BxTxH 1600x1600x3100mm m

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments Todoqt Dmyepfx Ac Nof - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 1995, condition: used, pressure 125 t stroke 10-80 mm no. of strokes 240 Hub/min ram - range of adjustment 80 mm table surface area 850x600 mm ram surface 760x550 mm Tedpfxjlp U Nqj Ac Nef hole in the table 850x130 verstellbar mm table height 1100 mm tool hole in ram Ø 50 mm total power requirement kW weight of the machine ca. 13 t dimensions of the machine ca. BxTxH: 3000x2000x3300 mm

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Tsdpfomhhl Hox Ac Nef Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. Tedpfxemkixwe Ac Nef We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Tsdpfjh Ek Daex Ac Nof - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.