14
CATALOG NUMBER 6569
TECHNICAL DATA
- max width of the workpiece 800mm
- max thickness of the workpiece 200mm
in advance:
- pulling, toothed, split shaft (segmented, sequential) enables simultaneous planing of several elements
- 2 rows of pawls
- pulling, toothed, split shaft (segmented, sequential)
- pressure
- planing shaft 800mm, 4 knives 10kW
- pressure
- smooth, metal shaft
from down:
- adjustable pre-table with a skid roller
- planing shaft 800mm, 4 knives 7.5kW
- sliding rollers 2 pcs
- ...
5
Machine was in everyday use until March of 2020. Mechanically it is in good condition but the exterior could use some attention.
Twu2jw8d
The detailed technical specifications can be seen in the attached photographs.
planing width 220 mm
planing height 140 mm
tool diameter max 160 mm
2 x 5.5 kW main engines
3 kW feed motor
feed speed 6 - 36 m / min - on the inverter
feed on cardan shafts
Nxo8cvc
heads supported on both sides
electric height adjustment
:VM-3225 | VM-4225 | VM-5225
x-travel:3200|4200|5100 mm
y-travel:3000/3400 mm
z-travel:800/1000 mm
distance spindle nose and table:235~1235 mm
distance between columns:2550/3050 mm
table-size:3350x2200|4350x2200|5350x2200 mm
table load:15|18|21 t
T-slot (width-distance-quantity):28x250x13|28x250x17|28x250x21 mm
spindle cone:50 BT/SK
spindle speed:6000 (opt.10000, 15000) 1/min
spindle drive:22/26 kW
Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm)
rapid traverse in x-y-z axis:15/18...
10
SCM Compact 23K four-sided planer
Working width 230mm
Working height 120mm
Number of spindles 4
Spindle arrangement: bottom/right/left/top
Bottom 4kw
Right/left 5.5kw
Top 4kw
Haugmrz
Average of spindles 40mm
Rotation of spindles 6000 rpm
Electric pressure bar adjustment
Feed speed 4-22m/min
CE marking
4
1600 mm
1800 mm
1020 mm
1800x1600 mm
MAS 403 BBT 40
15000 U/min
Cbsogl0pkv
27/32,4 kW
1250 mm
40
x-travel: 3 500 mm
y-travel: 2 200 mm
z-travel: 1 200 mm
Bfqp2fwv8g
c-axis: +/- 200°
control: Heidenhain TNC 426
spindle speeds -left sided:: max. 10000 U/min
spindle speeds -right sided:: max. 10000 U/min.
distance between columns: 2 500 mm
distance spindle /table: vertical: 1230 mm
clamping surface area: Tisch: 3000 x 2000 mm
table load: 10 t
tool taper: HSK A 63
feed:: X/Y/Z: max. 20 m/min.
compressed air: 8 bar
total power requirement: ca. 100 kW
weight of the machine ca.: 40 000 kg
dimensio...
6
x-travel 2500 mm
y-travel 3000 mm
z-travel 1250 mm
Control Heidenhain iTNC 530 HSCI
head swivability +-110 °
c-axis +-300
table load 16 t
table surface area 3250 x 2500 mm
spindle turning speed range 25000 U/min
tool taper HSK A 63
tool change unit 50 fach Kette
total power requirement kW
weight of the machine ca. 53,5 t
dimensions of the machine ca. 7600 x 7300 x 5650 mm
This ZIMMERMANN FZ33c is in mint, very good condition and can be viewed live by
arrangement.
New price over 1,2 milli...
2
pressure 125 t
distance between columns 1150 mm
stroke fix 25 mm
no. of strokes 70 - 700 Hub/min
dayligth (stroke and adjustment up) 400 mm
column travel -side 650 mm
table surface area 1150 x 1000 mm
hole in the table 900 x 220 mm
table height over floor mm
ram surface 990 x 850 mm
power requirement 46,5 kW
Mxgagk
weight of the machine ca. 29,50 t
required space 3,3 x 1,8 x 4,5 m
ram adjustment 60 mm
permitted for automatic mode according to the German Safety Regulations (UVV)
with infinite...
:VM-2018 | VM-3018 | VM-4018
x-travel:2300|3200|4100 mm
y-travel:2000 mm
z-travel:800 mm
distance spindle nose and table:180~980 mm
distance between columns:1840 mm
table-size:2300x1600|3200x1600|4100x1600 mm
table load:8|10|12 t
T-slot (width-distance-quantity):22x180x8 mm
spindle cone:50 BT/SK
spindle speed:6000 (opt.10000) 1/min
spindle drive:15/18,5|22/26|22/26 kW
Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm)
rapid traverse in x-y-z axis:20/20/15|20/20/15|15/20/15 m/min
fee...
9
Weinig Unimat 17A four-sided planer for wet
Working width 170mm
Working height 130mm
Pulling rollers in the table for wet wood
6 spindles
Spindle arrangement: bottom/right/left/up/down/uni
Power of individual spindles:
Bottom 4kw
Right 4kw
Left 4kw
Top 5.5kw
Bottom 4kw
Universal 4kw
Spindles with a diameter of 50mm
Spindle 4 and 5 have sharpeners
Feed on gimbals
Qcggd
Stepless feed regulation 6-36m/min
Machine with cabin
Machine exceptionally well maintained in perfect condition
3
3200 mm
2300 mm
920 mm
I9gyj2l
3200x2050 mm
BBT 50
6000 U/min
22/26 kW
2400 mm
40
5
Cantilever racking, heavy duty racking
-without insert trays: none available
-Double sided
-consisting of:
-Shelf: each with 3 uprights, 5.4 m high
-Double-sided support arms: 500 mm long
-Bolt load capacity: 795 kg
-Payload per side: max. 7000 kg
-screwed
-Number: 3x shelves available
-Price per piece
Enkzas0
-Own weight: 1250 kg / piece
9
x-travel 14000 mm
y-travel 5000 mm
z-travel 1500 mm
w-axis 3000 mm
column daylight 4000 mm
column: max. dist. table - spindle nose 4500 mm
workpiece weight 100 t
table dimension - longitudinal 9000 mm
table dimension - cross 3000 mm
spindle taper ISO SK 50
spindle turning speed range 2-2500 U/min
spindle motor 113 kW
spindle diameter 200 mm
max. torque on the spindle 9500 Nm
feed in x - axis 1-10000 mm/min
feed in y - axis 1-10000 mm/min
feed range Z-direction 1-10000 mm/min
rapid traverse 2000...
1
pressure 200 t
distance between columns 1550 mm
stroke 30 - 160 mm
no. of strokes 30 - 90 Hub/min
dayligth (stroke and adjustment up) 745 mm
B38tf0xbea
column travel -side 800 mm
table surface area 1500 x 1150 mm
hole in the table 450 mm
table height over floor 810 mm
ram surface 1500 x 1000 mm
power requirement 38,0 kW
weight of the machine ca. 26,5 t
required space 5,1 x 1,6 x 3,7 m
ram adjustment 110 mm
permitted for automatic mode according to the German Safety Regulations (UVV)
with infi...
2
x-travel:1200 mm
y-travel:800 mm
z-travel:500 mm
distance spindle center to table:150-650 mm
distance between columns:920 mm
table-size:1320x800 mm
table load:2000 kg
T-slot (width-distance-quantity):14x120x7 mm
spindle taper:HSK- A63
spindle speed:15000 (Direktantrieb) U/min
B3gtyusa
spindle drive:9/15 kW
Spindle motor torque:57.3/120 N.m.
rapid traverse in x-y-z axis:30000 mm/min
Cutting feed rate X/Y/Z axis:1~10000 mm/min
Tool changer:20
max. tool diameter:100 mm
max. tool length:235 mm
...
10
Four-sided planer Futura Krono 220/5
Planing width: 220mm
Planing height: 120mm
Number of spindles 5
Spindle arrangement:
Bottom 5.5kw
Right 5.5kw
Left 5.5kw
Top 5.5kw
Cbcmjx0lsk
Universal 5.5kw
Spindles adjustable in two planes
Electric adjustment of top presses
Speed adjustable on variator
2
3100 mm
2000 mm
1020 mm
B7f9ntsx3
3100x2000 mm
SK 50 DIN 69781
6000 U/min
22/26 kW
2100 mm
40
Four-sided planer
Sicar Prima 220-5
Max planing width 220mm
Throughput speed 6-12 m/min
Min/max planing height 8/120mm
Min/max planing width 30/220mm
Minimum workpiece length 450mm
Spindle diameter 40mm
Vertical spindles min/max tool 125/180mm
5 spindles
1st spindle bottom, 5.5kW
2nd spindle right, 4kW
3rd spindle left, 4kW
4th spindle top, 7.5kW
B9srslayob
5th spindle bottum, 7.5kW
5
x-travel 6000 mm
y-travel 2860 mm
z-travel 1500 mm
distance spindle nose and table 1652 mm
column daylight 2580 mm
Number of axles 5 simultan St.
c-axis +-300 °
head swivability +-110 °
spindle turning speed range 15000 U/min
tool taper HSK A+C50
table dimension - longitudinal 8000 mm
table dimension - cross 2500 mm
table load 30 t
Dkta9phbq
milling spindle drive 18 kW
feed speeds 20000 mm/min
control SIEMENS 840D
tool change unit 12 fach Pick-Up
total power requirement 30 kW
weight of the mac...
pressure 130 t
distance between columns 1600 mm
stroke 8 - 140 mm
no. of strokes 50 - 200 Hub/min
dayligth (stroke and adjustment up) 520 mm
column travel -side 610 mm
table surface area 1600 x 880 mm
hole in the table 1000 x 350 mm
table height over floor 950 mm
ram surface 1600 x 880 mm
P7wyd
power requirement 24,2 kW
weight of the machine ca. 28,00 t
required space 4,3 x 2,2 x 3,8 m
ram adjustment 100 mm
permitted for automatic mode according to the German Safety Regulations (UVV)
with inf...
x-travel:1200 mm
y-travel:800 mm
z-travel:550 mm
distance spindle center to table:150-700 mm
distance between columns:920 mm
table-size:1320x800 mm
table load:2000 kg
T-slot (width-distance-quantity):14x120x7 mm
spindle taper:HSK-A 63/HSK-E 50
spindle speed:15000 (opt. 24000/36000) U/min
spindle drive:7.5/11 (opt. 30/39; 20/26 kW
Bbpg3rrk
Spindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m.
rapid traverse in x-y-z axis:30000 (opt. 40000) mm/min
Cutting feed rate X/Y/Z axis:1~10000 (op...
15
Weinig Unimat 23 CE four-sided planer
Planing width 230mm
Planing height 150mm
Diameter of spindles 40mm
Spindle arrangement:
Bottom 7.5kw
Right 7.5kw
Czawl0heu
Left 7.5kw
Right 7.5
Top 11kw
Bottom 7.5kw
Top 7.5kw
Bottom 7.5kw
Feed motor 7.5kw
Feed speed adjustable 1-36m/min
4 pulling rollers in table top
Feed on cardan shafts
CE
Year 1995
Total power 75kw
3
4200 mm
2600 mm
1020 mm
4200x2050 mm
BBT 50
6000 U/min
B7do8wdxo
30/37 kW
2700 mm
40
14
Four-sided planer
Jajf7ox8s
Gubian BS 230/4
6 Spindles
Maximum planing width 230mm
Maximum planing height 130mm
Spindle 40mm
380V
Machine no. 6459
Spindles:
Below 7.5kW
Right 4kW
Left 5.5kW
Right 4kW
Above 5.5kW
Universal 5.5kW
Extension with additional bottom spindle possible.
Own weight 4500kg
10
x-travel 3500 mm
y-travel 2500 mm
z-travel 1250 mm
39jgep7o
control FIDIA C20
c-axis +-300 °
milling-head swivable +/- 110 °
rapid traverse 20 m/min
spindle turning speed range 15000 U/min
tool taper HSK 63A
table dimension - longitudinal 3500 mm
table dimension - cross 2500 mm
column daylight 3640 mm
total power requirement kW
weight of the machine ca. 35 t
dimensions of the machine ca. 6,4 x 5,9 x 4,8 m
The ZIMMERMANN FZ 37 portal milling machine is in very good condition.
can be inspe...
5
pressure 125 t
distance between columns 1250 mm
stroke 8 - 130 mm
no. of strokes 10 - 160 Hub/min
dayligth (stroke and adjustment up) 480 mm
column travel -side 520 mm
table surface area 1250 x 900 mm
B7pcv27aoa
hole in the table 1000 x 200 mm
table height over floor 1000 mm
ram surface 1100 x 800 mm
power requirement 22,5 kW
weight of the machine ca. 25,00 t
required space 2,3 x 1,9 x 3,6 m
ram adjustment 80 mm
permitted for manual put-in according to the CE Regulations
Permitted for automat...
3
x-travel:3200 mm
y-travel:2000 mm
z-travel:1000 mm
distance spindle nose and table:200-1200 mm
distance between columns:1820 mm
table-size:3200×1600 mm
table load:10 t
T-slot (width-distance-quantity):22x180x8 mm
spindle cone:50 BT
spindle speed:6000 (Direktantrieb) 1/min
spindle drive:22 kW
Spindle motor torque:689/1692
rapid traverse in x-y-z axis:20/20/12 m/min
feeds:1~10000 mm/min
Tool changer:Vorbereitung für WZW
workpiece length:350 mm
tool diameter:110/225 mm
weight of tools max.:20 kg
...
SCM P64 four-sided planer
Working width 180mm
Working height 100mm
4 spindles
Spindle arrangement:
3o9lpyex
Bottom 4kw
Right/Left 5.5kw
Top 4kw
Diameter of spindles 35mm
Two-step feed rate: 6-12 m/min
Electric height adjustment
Adjustable spindles
Input table length 2300mm
Machine dimensions 3300x1200x1600mm
3
5200 mm
2300 mm
1020 mm
5200x2050 mm
SK 50 DIN 69781
4000 U/min
Cbsos3l2t9
24/30 kW
2400 mm
40
14
Four-sided planer
SCM Sintex
380V
Qgqgl
Year of construction 1996
4 spindles
Spindle below / above 7.5kW
Spindle left/right 7.5kW
Max working height 105mm
Max working width 180mm
Input table 2300mm
Spindle diameter 40mm
Total dimensions 3400x980x1600mm (LxWxH), weight 925kg
9
x-travel 7000 mm
y-travel 3000 mm
z-travel 1751 mm
tool taper HSK A-63
turning speeds 20000 U/min
tool change unit 20 -fach
Control FIDIA C20
spindle motor 20 kW
rapid traverse 65 m/min
milling head -swivable +/- -95 / +125 °
milling head swivable ca. +-275 °
Number of axles 5 simultan St.
total power requirement kW
C0qqunx
weight of the machine ca. 105 t
dimensions of the machine ca. 12,2 x 6,3 x 5,8 m
The machine is in good condition and can be inspected under power by
arrangement with ...
x-travel 17700 mm
y-travel 4755 mm
z-travel 800 mm
milling width 3450 mm
distance table - vertical milling spindle 3682 mm
table height over floor 500 mm
spindle diameter in front bearing 200 mm
turning speed range 12 - 450 U/min
tool taper ISO 60
axial adjustment of the spindle slide 800 mm
creep feed 5 und 50 mm/min
feed stepless 10 - 3000 mm/min
cross adjustment of cross beam milling head 4745
rapid traverse 2 m/min
creep feed 3 und 30 mm/min
Benjqh3ak0
feed stepless 6 - 2000 mm/min
rapid t...
5
x-travel:2200 mm
y-travel:2650 mm
z-travel:1200 mm
Cabxi2jwlz
distance between columns:max. 2150 (ohne Spritzschutz) mm
table-size:2000x1800 mm
cross section of ram:450x400 mm
universal head:TRAMEC A5TK (made in Germany), Universal-Gabelkopf
:HSK A63, max. 18000 rpm, 28 kW (S1)-90 Nm (S1)
:Siemens 840D SL+15"LCD (5 axis simultaneous application)
table load:max. 12 t
Tool changer:32 -fach
workpiece length:250 mm
tool diameter:80/130 mm
weight of tools max.:8 kg
machine dimensions LxWxH:6,4 x 4...
8
x-travel 9000 mm
y-travel 3000 mm
z-travel 1250 mm
control Sinumerik 840D
table surface area 10000 x 3000 mm
distance between columns 4000 mm
distance table -spindle nose max/min 73 - 1323 mm
operating hours 15000
tool taper DIN 69871 A 50
turning speed range 35 - 4000 U/min
feeds 6 - 20000 mm/min
rapid traverse X- and Y-axis 40000 m/min
rapid traverse: vertical 30000 mm/min
tool changer number of tools 80
weight of tools max. 25 kg
tool changing time 10 sec
milling head -swivable 360 Grad
m...
3
4200 mm
2300 mm
1020 mm
4200x2050 mm
BBT 50
6000 U/min
30/37 kW
Cbsl9xtz9i
2400 mm
40
Four-sided planer
Weinig  Quattromat 23P
Year of construction 1998
400V
Jahhkx0qa
Machine number: 88502
ATS Operating System
Min/max working width 13/230mm
Min/max working height 6/120mm
Feed rate 8m/min
Spindle diameter 40mm
Speed 6000 rpm
Engines:
1st spindle, Below 4kW
2nd/3rd spindle, Right/left 7.5kW
4th spindle, Above 5.5kw
6
Technical characteristics
Working width: max 230 mm, min 15 mm
• Working height: max 150 mm, min 10 mm
• 2000 mm chrome feed table
• Drive shaft drive shaft 4 kw, speed 6 to 24 m / min
• Chromed toothed feed rollers up to the 1st spindle, rubber after; pneumatic pressure and rise / fall
• Electric height adjustment
• Mechanical display on spindles, except for dressing
• Power supply 400 V, 50 Hz, emergency stop, switches
Composition:
1. Horizontal lower spindle
- 7.5 Kw
- 6000 r...
x-travel 4000 mm
y-travel 3500 mm
Bdq23jyw
z-travel 1500 mm
Control Siemens Sinumerik 840 D
total power requirement 45 kW
weight of the machine ca. t
dimensions of the machine ca. m
3
x-travel 2500 mm
y-travel 2500 mm
z-travel 1000 mm
control Heidenhain TNC 426 PB
table-size 3000 x 1250 mm
distance between columns 2000 mm
rapid travel x/y/z 15/12.000 mm/min
feed 5 m/min
Csf8uody
milling head Orthogonal UDG
milling head -swivable +/- 2,5 °
taper ISO 50
spindle turning speed range 50 - 2.000 U/min
transmission ratio 2
Tools changer 10 fach/tools
Internal cooling system 15 bar
spindle drive 30 kW
table weight 10.000 Kg
handwheel HR-410
total power requirement 44 kW
weight o...
14
CATALOG NUMBER 6632
TECHNICAL DATA
- max width of the workpiece 180mm
- max height of the workpiece 110mm
- length of the introductory top 1700mm
- number of spindles 4
1) horizontal lower 180mm 5.5kW
2) vertical right 110mm 5.5kW
3) vertical left 110mm, right / left adjustable 5.5kW
4) horizontal top 180mm, adjustable up / down 5.5kW
- diameter of the spindles 40mm
in advance:
- 4 introductory pulling, toothed rollers, including two double ones
- rubber, pulling roller
Qpqyx
- clamp from the b...