Used Double Wheel Grinder for sale (25,216)

Condition: excellent (used), Double bench grinder Codpfek Iwx Ejx Aiaegu

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Cgedpfexq Hkuox Aiaju Subject to prior sale!

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Cgsdpfx Aodzp Tboiasu Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Codpoy R Drljfx Aiaogu

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg Cgjdpfx Aioydi A Ijaou

Condition: good (used), Aceti Macchine double grinding wheel Type: FB 90 2/4 ART 101 Diameter grinding stone max: 210 mm Machine height: 130 cm Cedpfx Aijl I I Upoaegu Weight: ca 125 KG

Condition: good (used), Grinding wheel diameter: max. 300 mm Rotational speed: 1,500 rpm Drive power: 1.5 kW Machine dimensions (L x W x H): 750 x 420 x 1100 mm Weight: approx. 130 kg Csdpfx Aijw Emaheaogu Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Double bench grinder Cjdpfx Aieywbatsaogu

Condition: good (used), double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW Cjdpedzxklsfx Aiasgu -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Csdjxq R Haspfx Aiasgu Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Cgsdpfsxuv Udex Aiasu Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, respectively Grinding wheel dimensions: 175 x 25 x 51 mm Grinding wheel speed: 2900 rpm Cgjdpfedqgmwex Aiaeu mounted on a common base

Condition: ready for operation (used), Grinding wheel dimensions: 200 x 25 mm Grinding wheel mounting hole: 51 mm Grinding wheel speed: 2900 rpm Grinding wheel drive: 380 V, 0.7 kW Cgedpfxef Aru De Aiaeu

Condition: used, machine/vehicle number: 053051, grinding area: 200 x 25 mm electrical connection: 380 V, 0,5 kW space needed: 550 x 450 x 1100 mm Cjdobfp Ixepfx Aiajgu weight: 95 kg

Condition: used, Grinding wheel dimensions: Diameter 175 mm Width 25 mm Bore 51 mm electr. connection: Alternating current 220 V, 420 W kW Csdpfx Aeby Hh Ioiasgu space requirement: 400 x 400 x 1140 mm weight: 33 kg

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm electrical connection: 380 V, 0,55 kW space needed: 530 x 400 x 1180 mm Cgedpfx Aiod Ixbcoaou weight:

Condition: used, machine/vehicle number: 87/64-369, Grinding wheel dimensions: 400 x 50 mm Grinding wheel speed: 1400 rpm Drive motor: 380 V, 1400 rpm, 2.2 kW Space requirement: 750 x 470 x 470 mm Weight: 138 kg Cgsdpfob Tqhqox Aiaju

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Codpfxsx E Rx Uo Aiajgu Grinding wheel speed: 1400 rpm Drive motor: 400 V, approx. 1.5 kW Weight: kg Required space: 700 x 400 x 1100 mm

Condition: good (used), Grinding wheel diameter: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Cjdpjv D E Szefx Aiaogu Space required: 1050 x 580 x 1200 mm Weight approx.: 140 kg

Condition: ready for operation (used), Grinding wheel diameter: 250 mm Grinding wheel width: 32 mm Grinding wheel bore: 51 mm Grinding wheel speed: 1450 rpm Grinding wheel drive motor: 1450 rpm Drive power: 0.73 kW Electrical connection: 380 V, approx. 1.1 kW Required space: 630 x 550 x 1100 mm Weight approx.: 75 kg Cedsxpv Aqjpfx Aiajgu

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm Cjdpsvnmnrjfx Aiaegu total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: ready for operation (used), Year of construction: 1970, Double sanding bench with tilting device Type:R20 1 H Grinding wheel diameter 200 mm. Cgsdpfotwnxusx Aiasu

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Csdpjvnrm Hefx Aiaegu Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: new, Year of construction: 2026, Tabletop version -High performance -Belt grinding attachment height adjustable from 0-90° -Maximum usable surface grinding surface -Belt adjustment with fine adjustment Combined belt grinder/sander -Longitudinal stop for material guidance -Perfectly balanced and low-vibration -Double-sided connection for dust extraction Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop -1 standard sanding belt (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Additional charge for special equipment/options: - Machine stand, emergency stop push button, brake, and extraction system / €2,260 (Item 330.370) - Machine stand, emergency stop push button and brake / €1,030 (Item 330.365) - Machine stand with water immersion tank / €360 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE! Cjdpfxshhiaas Aiaogu

Condition: new, Year of construction: 2026, Description Double-sided grinding machine TS 200 SD P with extraction system, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Cjdpfer Eqzfjx Aiasgu Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 - Speed (rpm): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!