Used Draw Press for sale (13,992)

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Hsdpfx Aoyvgrheh Sont Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Condition: used, Year of construction: 1998, machine/vehicle number: 2 / 2000, Pressure total: 2000 ton Hnodpfx Aheyvz Sts Sot Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 2002, Manufacturer: ROVETTA Model: S4-2000 Year: 2002 Condition: Used Stock number: 0372 Press capacity: 2,000 tons Number of slide points: 4 Hedpfxsxbcnws Ah Sont Slide stroke: 1,000 mm Die space between platens: Min. 1,150 mm, Max. 1,650 mm Slide adjustment: 500 mm Table size: 4,500 x 2,300 mm Moving bolster: Yes Cushion in bed: Yes Blankholder cushion total force: 400 tons Lower blankholder stroke: 300 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Hnodsy Ul I Aepfx Ah Sjt Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production.

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, total length: 8,000 mm, total width: 8,000 mm, total height: 9,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Hnjdsyw Ah Eopfx Ah Sst Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Hsdpfezt H U Sex Ah Sont Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, pressing force: 25 t, overall weight: 1,900 kg, Neff straightening press RPH 25 in very good condition, no oil leaks, runs smoothly. Hnsdpfx Aez A Dktjh Sst Fine and precise control of the pressing force. Outreach: 250 Distance between cylinder and plate: 500 Working stroke: 300, adjustable Working pressure: adjustable Lowering speed: adjustable Forward and reverse stroke: adjustable. With additional shaft alignment device (removable). Table: 420 x 1000, shaft plate: 400 x 1300 Dimensions: H 2.1m, D 1.28m, W 1.0m - 1.3m Weight: 1900 kg Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: ready for operation (used), Year of construction: 1995, A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible. Hnjdpfxjy Ndf Ae Ah Set

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Hedpfoin Et Nsx Ah Sent Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Hsdozzkwgopfx Ah Sjnt Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Hnjdpoup Skwefx Ah Sst Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Hnjdpfezb Aivex Ah Sot Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 360 kg, Dimensions WxHxD: 900 x 1180 x 750 mm Weight: 360 kg Operating principle: hydropneumatic Hsdpfjzvz Dtjx Ah Sjnt Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Air connection: R 1/4" Punch stroke: 17 mm Return stroke: 140 mm Maximum punching height: 150 mm Maximum profile height: 210 mm

Condition: used, Year of construction: 2000, pressing force: 1,600 t, total length: 6,000 mm, total width: 3,000 mm, total height: 8,000 mm, overall weight: 2,00,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Hedpszxkrrsfx Ah Sont Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Pressing force max.: 1,600 t Dimensions (LxWxH) approx.: 6000 x 3000 x 8000 mm Weight approx.: 200,000 kg Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Hsdpfjz Aagasx Ah Sent Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: DHD/250/100, functionality: fully functional, input voltage: 400 V, pressing force: 250 t, stroke length: 600 mm, operating speed: 170 mm/s, reverse speed: 250 mm/s, table width: 1,200 mm, table length: 1,000 mm, ram plate width: 1,200 mm, ram plate length: 1,000 mm, total length: 2,000 mm, total width: 2,700 mm, total height: 4,500 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, die cushion stroke: 200 mm, electrical fuse: 63 A, installation height: 900 mm, pressure: 235 bar, Euroblech 2024 trade fair machine - Hamburg location. Hnjdpfettriaex Ah Set

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic portal straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and is equipped with an integrated tooling clamping device as well as parallel control for bending blades. Thanks to its movable table, sliding cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Specifications - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Gantry press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: depending on load ==== Hydraulics & Performance - Pressure setting: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free breakout force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples ==== Construction & Features - Integrated tool clamping device - Parallel holding for bending blade - Induction-hardened cylinder - Machine body powder-coated / double painted - T-slots to customer specification ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) ==== Hnodpfx Aewgakvoh Sjt Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are constructed according to German machinery guidelines as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our core strengths are special purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, clearance between the columns: 5,100 mm, retraction force: 130 t, HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Maximum force adjustable slide Ton 200 to 2,000 n. 04 Cylinders Net slide return force Ton 130 Maximum piece dimensions mm 5,000 x 2,800 x 1,700 Maximum piece weight kg 60,000 Upper part weight Kg 35,000 Slide stroke mm 1,500 Maximum clearance between worktops mm 2,500 Minimum clearance between worktops mm 1,000 Front distance between uprights mm 5,100 Lateral distance between uprights mm 2,000 Moving Bolster Front: Front mm 5,000 Hjdpfx Aewlgr Reh Sont Lateral mm 2,800 Plan height above zero level mm 650 External stroke mm 4,000 Capacity Ton 60 Slide Plane: Dimensions mm 5,000 x 2,800 Number of guides n° 8 Guide height mm 1,800 Lower blank holder cushion (6 cylinders, force 600-6,000 kN) Upper slide cushion (force 300-3,000 kN) Spark plug diameter (40 mm) and center distances (150x150 / 200x200 mm) Working speed: Minimum mm/sec 3 Maximum mm/sec 110 Approach mm/sec 400 Return mm/sec 350 Stop time ms 219 Safety distance mm 438 Weight without tools kg 365,000 USED MACHINE

Condition: good (used), Year of construction: 1985, Manufacturer: RADAELLI Model: 1000/S2 Year: 1985 Hodsyrigpopfx Ah Sont Condition: Used Stock number: 0388 Press force: 1000 tons Press points: 2 Ram dimensions: 2,820 x 2,200 mm Table size: 3,150 x 2,200 mm Ram stroke: 500 mm Die height at BDC: 1,000 mm Ram adjustment: 190 mm Strokes per minute: 15 spm Pneumatic cushion present

Condition: used, Year of construction: 2018, machine/vehicle number: A0221E1033, functionality: fully functional, operating hours: 31,621 h, table width: 1,500 mm, table length: 3,000 mm, Power: 3000 W Hsdpfx Aszzyl Hjh Ssnt Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee.

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm Hedpfx Asyxhp Deh Ssnt - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Hnjdpeyxhq Iofx Ah Set Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Return force (gross): 1,660 kN Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Bending force 700T Hsdpfowd I Svex Ah Sont Bending lenght 6500 mm Distance between columns 5100 mm Depth throat 420 mm Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: used, Manufacturer: Müller Stanz- und Umformtechnik GmbH & Co. KG Type: PMLE250x1700 R-HK Machine No.: A05036-02 Year of manufacture: 2006 Machine type: Eccentric press Press force: 2500 kN Press force: 250 t Stroke rate: 20–120 min⁻¹ Stroke: 25–125 mm Ram adjustment: 100 mm Voltage: 400 V Motor power: 55 kW Connected power: 100 kW Weight: 47,000 kg Draw cushion: No Hedpfxezrz Ece Ah Sent Condition: Used Machine is leaking hydraulic oil Several leaks are present in the hydraulic system Tension pins for the ram adjustment have been deactivated due to the hydraulic leaks Sold without conveyor system Videos available upon request Location: Freiburg

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances Hnjdpfxozhudqe Ah Set • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.