Used Toggle Press for sale (27,877)

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm Gujdpfx Asvuukneabjh no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 Gsdpfx Aovzxpuoabeuh multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: good (used), Type DO 3 Machine No. 3492 Gjdpfx Aexn Ad Sjabsuh Force 20 kN Stroke 39 mm

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication Guedpfx Asgp T Eueabjh - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: like new (used), Year of construction: 1997, Manufacturer: INVERNIZZI Model: GNT2 Year: 1997 Condition: New Stock number: 0387 Press force: 1,000 t Number of pressure points: 2 Ram stroke: 150 mm Ram adjustment: 20 mm with wedges Strokes per minute: 12–55 Die height from die holder (cbra): 800 mm Sheet passage in frame: 660 mm Guodpexnx Exjfx Aabeh

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min Gsdpfx Aaovuukusbeuh distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Guodpfefv Avksx Aabjh Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: used, pression: 1,2 kg table size: 110 x 150 mm Godpfxodbmpmj Aabeuh clearance hole in the die: 20 mm throat: 86 mm max. distance between table and tappet: 80/210 mm tappet stroke: 30 mm space needed: 240 x 150 x 510 mm weight: 21 kg

Condition: ready for operation (used), Schmidt 33-156-01 Toggle Press PressControl 500 Pressing force: 15 kN Stroke: 40 mm Overrun time: 0.07 sec Overrun distance: 15 mm PressControl 500 Two-hand operation You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. Guodpfx Aexcn Apsabsh Specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Projection 150 mm ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Guodpfx Aaovcdvpjbeh Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Condition: excellent (used), Year of construction: 1992, Manufacturer: Woronez TMP Year: 1992 Model and configuration: KB8044 / 2500 ton Nominal force: 2500 tons Slide stroke: 190 mm Number of strokes: 14-20 Godpfx Ajxlh Ttoabeuh Closed die height: 560 mm Slide adjustment: 15 Table dimensions: 1530 x 1530 mm Distance between uprights: 1600 mm Main motor: 77 kW, 380 V Overall dimensions: 4920 x 3340 x 5980 mm Weight: 125 tons.

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system Gusdpfx Aaew U Ekpobeh

Condition: new, pressure 34,0 kN stroke 40 mm Gusdpfofv Avyex Aabsh throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Year of construction: 1993, condition: used, machine/vehicle number: P 285, pression: 800 kN table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm Gujdj N D Anopfx Aaboh weight: 6000 kg

Condition: good (used), Year of construction: 1990, SCHMIDT Pneumatic Toggle Press - Rated pressing force: 60 kN - Max. rated pressure: 8 bar - Overrun stroke: 15 mm Good condition, fully functional, can be inspected and tested on site. International shipping available. Guedpfx Ajw Rctasabsh Inspection: Please note that, in order to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to purchase to avoid any uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping via freight carrier.

Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Ram stroke 12 mm Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction Gedov Srfkopfx Aabsuh - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Very good condition

Condition: new, Kyori High-Speed-Press VX40-W with Siemens-Control Technical specification: tonnage: 400 KN drive: flywheel with dynamic balancer feeding direction: right to left color: Kyori white RAL 7035 position of main drive: right ram adjustement range: 50 mm Godpfx Ajt Upvbsabouh shut height : 240 mm max. upper die weight: 180 kg safety doors: front and back tool load area light: 2 LED-lights bolster area (LxW): 950 x 600 mm bolster design: T-slot bolster material: steel bolster thickness: 120 mm base plate opening (LxW): 760 x 120 mm ram area (LxW): 950 x 450mm ram design: T-slot dimensions: 2120 x 1400 mm total height: 3170 mm weight: (approx.) 9.500 kg strip inlet height: has to be defined strip inlet width: max. 300 mm feed: Vamco SR-150

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t Overhauled in 2012 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Godovuuk Iopfx Aabouh overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: new, pressure 500 kN stroke 40 mm throat 73 mm Working height from to 60 - 150 mm Gusdpfx Aof Nb Exjabeh table surface area 115 x 70 mm weight of the machine ca. 10 Kg .Toggle lever hand press SPECIAL OFFER!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: good (used), Year of construction: 1980, For sale Knee press 200 tons Godpfx Aajv Uxwljbjuh The price given in the advertisement is a net price to which VAT should be added

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Guedpfsv Uraaox Aabeh Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Year of construction: 1977, pressure 30 t throat 110 mm stroke 50 mm no. of strokes 35 - 80 /min passage to the back 170 mm dayligth 230 mm table surface area 410 x 260 mm table height over floor 790 mm ram surface 190 mm ram adjustment 35 mm power requirement 1,0 x 1,1 x 1,8 kW Weight 1,3 t Gujdpovuugpsfx Aaboh permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) as is where is, WITHOUT putting into operation - video at seller's site before dismantling available

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Gujdpfx Aaefv Avvobeh Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, pressure 17,0 kN stroke 60 mm throat 105 mm Working height from to 75 -180 mm table surface area 170 x 130 mm spindle diameter 25 mm weight of the machine ca. 35 Kg dimensions 260 x 130 x415 mm Gusdjfv Avnspfx Aabeh Knee lever hand presses SPECIAL PRICE!!! HK 1700 stroke 60 mm with crank with fine adjustment of working height Stand height 450 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 26,0 kN Gjdpfefv Avrsx Aabouh stroke 60 mm throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column