Body press, straightening set
-Manufacturer: DEMA/Europrotec
-Transfer: in the current condition as seen
-Support plate: corner broken off
-Pump: 10 t with pressure cylinder
-various accessories
-Metal case
-Dimensions: 710/285/H160 mm
Bjdly8ts3s
-Weight: 31 kg
2010 LIGNUM PRESS for the body
Lignum1 - used 2010
Mark:
Lignum1
Model:
-
Description:
2010 LIGNUM PRESS to the body
LIGNUM1 in Kłodawa
Location
Gorzów Wlkp.
Conditions of delivery
SELF COLLECTION
Shipping cost
Client protection
Start type
to be agreed
Description
Comments
CHAIR PRESS 8 PIECES OF CYLINDERS FI 70 mm BINDING SPEED 560 mm BINDING HEIGHT 900 mm
Buwuolxtzp
Year:
2010
Item no.7-05
Year of manufacture: 1980
Machine number: 330 27 80 680
Type: Export
Make: Hess
Buojl8q2vk
Technical data:
Pneumatic
3 pcs pressure units sideways (6 pcs punches)
4 pcs. pressure units on top (8 pcs. punches)
0,75 Kw
clamping length: 2500 mm
Clamping height: 1500 mm
Pallet requirement: LxWxH: 3800 x 700 x 2500 mm
Condition of the machine: 5 - ready for use (used machine)
Machine is technically o.k. and ready for operation
pressure:400 t
distance between columns:1100 mm
stroke:250 mm
no. of strokes:25 - 75 /min
distance table/ram, max. stroke up, adjustment up:900 mm
table surface area:1100 x 965 mm
capacity of ejector in table:30 t
ejector stroke of ejector in table:80 mm
2wdpz2jj
capacity of ejector in ram:3 t
stroke of ejector in ram:60 / 70 mm
ram surface:980 x 800 mm
column travel -side:800 mm
ram adjustment:20 mm
power capacity:80,0 + 5,5 kW
weight:47,0 t
Dimensions (WxDxH):3,5 x 3,3 x 6,0 m
weight of switch...
Spindel Press Krause
Eoaxjnybs
Year - Serial-No. 190675
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Forging line INVER PRESS LECCO 100 T built in Italy. Brass forgings were made on the line from a solid rod fi 19. After swelling, we get a diameter of fi 24. Product lengths: from 25 to 50 mm.
The forging line consists of the following devices:
1. INVER PRESS LECCO 100 TON forging press, eccentric with pneumatic clutch, pressure: 100 tons
- dimensions of the eccentric press (width x length x height): 1750 x 1100 x 2100 mm
2. AMYSA WMU V-10x induction device made in Italy:
- induction heating ba...
pressure 60 t
stroke 380 mm
table surface area 750 x 260 mm
press capacity 588 kN
Pressure power 259 bar
working width 750 mm
pressing speed 2,07 mm/sec
Bwwynnx
feed speeds 8,69 mm/sec
return speed 10,79 mm/sec
Ø 210 mm
total power requirement 1,5 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1,3 x 0,8 x 2,1 m
This 60 ton motorized workshop press with sliding cylinder is very robustly
built and manufactured in the Netherlands. The hydraulics work extremely
precisely in b...
⢠Minimal footprint
⢠Height continuously adjustable
Bjfhulirbn
⢠Suitable for 2- and 4-up
Low-cost shipping The Smart Stacker XXS has been developed in order to enable CtP users in the 2- and 4-page format a space-saving and cost-effective possibility of plate stacking. On a footprint of only 640 x 658 mm, up to 100 plates are automatically stacked by that stable âlightweightâ made in Germany. Low-cost shipping due to a package size of 118 x 78 x 17 cm (L x W + H) and weight of only 1...
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
voltage 400 V / 50 V
adjustment movement hydraulic up to 120 mm
motor speed 1400 U/min
total power requirement 1,5 kW
weight of the machine ca. 430 kg
dimensions of the machine ca. 1200 x 800 x 1750 mm
Horizontal and vertical position,
optionally two or three driven rollers,
standard roller set,
lateral guide rollers,
Tlvmt3hi
foot pedal with safety button,
according to CE,
operating instructions,
pressure:400 t
distance between columns:1060 mm
stroke:450 mm
Fe7ib0b
no. of strokes:15 - 30 /min
distance table/ram, max. stroke up, adjustment up:1160 mm
table surface area:1000 x 700 mm
capacity of ejector in table:2 x 16 t
ejector stroke of ejector in table:125 mm
Die cushion pressure in table:120 t
Die cushion stroke in table:2 mm
capacity of ejector in ram:2 x 4 t
stroke of ejector in ram:100 mm
ram surface:1000 x 700 mm
column travel -side:630 mm
power capacity:55,0 kW
weight:50,0 t
die c...
Spindle Press Krause KgS
Jiciqnz
Year - Serial-No. KgS
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
pressure 100 t
stroke 380 mm
Gvufe0
table: 1740 x 996 mm m
daylight between the columns 1050 mm
daylight - vertical 600 mm
total power requirement 2,2 kW
weight of the machine ca. 1,6 t
dimensions of the machine ca. 1,7 x 1,7 x 2,2 m
Unique Cold Hydraulic Press Specially Designed for Engineered Wood Flooring (Parquet) Production
Deck Art MK1 (first generation) Cold Press CP 250/2500 (3800)
Technical parameters:
• Max gluing width - 250 mm
• Max gluing length - 2500 (3800) mm
• Max gluing height - 850 mm
• Working height (static) - 800 mm
• No of pressing cylinders (total) - 16 (24) pcs
• No of pressing cylinders per cycle - 4 cycles x 4 cyl. (4 cycles x 4 cyl.; 4 cycles x 2 cyl.)
• No of independent pressing cycles - 4 (8...
Typographic printing press
Produced in the Netherlands
Correct machine, no damage.
In full original.
It can serve as a machine for work as well as a museum exhibit.
Handmade hammer delivered.
Wałki
Bvbrz0cvnx
pressure 16 t
Nulov
plate thickness 4 mm
no. of strokes 70 Hub/min
stroke speeds 1,7 sec.
working feed 2/9.8 mm/sec
return speed 20 mm/sec
piston stroke 70 mm
arm length: 160 mm
total power requirement 2,2 kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 0,8 x 0,45 x 1,43 m
In this offer you acquire a used colour production system "Xerox Colour J75 Press".
Item for sale:
1 x Xerox Colour J75 Press with the following equipment:
-incl. Squarefold
-incl. Impose Fiery Edition
-incl. Square Fold Trimmer Module JFN-1
-incl. Finisher LFN-7
-incl. Finisher ZYC-1
-incl. Paperdeck JCF-1
-incl. Fiery EX-J75
Counter readings:
Bk9ah3g8ak
Total: Approx. 1,611,042 pages
Colour: Approx. 793,022 pages
Black: Approx. 818,020 pages
Condition:
This is a used machine...
Table size 2500 x 1300 mm
Total thrust 70 Ton
Stroke – total opening 400 mm
N. 4 of cylinders
Pistons D 70 mm
Approx. weight 2400 kg
Fabricated assembled steel platen max. temp up to 120 ° C max working pressure 3-5 kg/cm2
Heating medium pressure 2,5 bar, it is composed by:
G) ALUMINIUM COVERING FOR A BETTER SURFACE FINISHING AND A BETTER HEAT PROPAGATION
H) FLAT GAUGED STEEL SHEET
I) Coil of piping for hot water/oil circulation
J) Reinforcement piping
Vqos9i
K) Flat gauged steel plate, only f...
pressure 50 t
stroke 250 mm
throat 265 mm
table: 700 x 450
ram surface 550 x 300 mm
total power requirement 4 kW
weight of the machine ca. 1,7 t
Beojfhitbb
Unique Cold Hydraulic Presses Specially Designed for Engineered Wood Flooring (Parquet) Production
Technical parameters of our standard MK2 models:
- Max gluing widths - From 200 to 320 mm (Up to 500 mm upon order)
C8ten7xxm
- Max gluing length - 2560 mm to 3840 mm (Unlimited upon order)
- Max gluing height - 800 mm
- Working height - From 800 to 850 mm
- No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order)
- No of independent pressing cycles - From 4 to 12 cycles (unlim...
Machine was ordered for a certain application but did not work
Bfxe7bzxnd
pressure 10 t
stroke 30 mm
table surface area 105 x 366 mm
distance between columns 366 mm
column daylight 70 mm
32 mm
total power requirement - kW
weight of the machine ca. 55 kg
dimensions of the machine ca. 500 x 700 x 1030 mm
Benmuvyijl
In this offer you acquire a used colour production system "Xerox 800 Colour Press ".
Item for sale:
1 x Xerox 800 Colour Press with the following equipment:
incl. 2x large capacity stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. Free Flow Controller
Hvxumcy
Counter readings:
Total: Approx. 17,171,752 pages
Colour: Approx. 15,509,952 pages
Black: Approx. 1,661,800 pages
Condition:
This is a used machine and may show signs of use (minor s...
Used C-frame gap hydraulic presses for sale, second hand, for cold stamping of metal sheet and coil. FPM has a long tradition in sales and overhauling of hydraulic presses. Each used hydraulic gap press for sale is available in the condition "as is", in working conditions or fully overhauled and rebuilt.
DATA SHEET
Hta3jnxy3
Code: PICC002
Manufacturer: FLUID PRESS
Condition: Used
Processed material: metal sheet
Quantity of con-rods: 1
Nominal power: 60 ton
Table dimension: 1.100 x 800 mm
Slide...
Good working condition
Manufactured in Romania
YOM: 1986
Hydraulic
Ram stroke: 700mm
Nominal working pressure: 320 bar
Working direction: Up to Down
Work surface: 2000mm x 2400mm
Brgz07z8jv
Fast approach speed: 200mm/sec
Working speed: max.50mm/sec
Return speed: 250mm/sec
Maximum height from the ground: 8000mm
Weight: 120000Kg
Dimensions:
2750x1700mm
T-nut plate: 2440x1520x230mm
L3bigh2g
Press design MBM TYPE B27-1 for coffins
Nlymtyt0u
mounting press-coffin funeral press obekasten
pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
total power requirement 4 kW
weight of the machine ca. 0,650 t
Stddfg
diameter of piston 180 mm
working feed 2 mm/sec
return speed 20 mm/sec
pressure capacity max. 200 bar
toolpiece height min. 200 mm
dimensions of the machine ca. 1150 x 750 x 1103 mm
This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ?
?The application of this Profi Press horizontal bending / straightening...
In this offer you acquire a used colour production system "Xerox Rialto 900 Inkjet Press ".
The Rialto 900 closes the gap between high-speed inkjet production printing systems and cut sheet systems with toner technology. It combines the speed and economical cost per page of inkjet technology with high print quality and low investment costs.
Item for sale:
1 x Xerox Rialto 900 Inkjet Press with the following equipment:
incl. Double Stacker
incl. cutter
Original price: 710.000€
Meter read...
Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014.
Lydy8clb
Press-vite ironing / steam table 4 whirlpool hoods, 9000W BJ. 2002, Pr12LP +.
You buy a hanger system
Dv7r7m
Ironing / steam table press vite, with 4 adjustable hot tub covers, and 2 steam generator / en working width approx. 340 cm, 380VPr12LP - 9000W
BJ 23.10.2002
Control GE VAT20 U20NOK7S
BJ. 16.02.2002
Find more articles in our shop!
Article number 17746;
For inquiries please specify;
Dimensions: 2740x1700x220mm
Beya8omnph
frame hydraulic press WEGOMA
Dgjnj29
Workspace: width 3600 mm height 2500 mm
the amount of lateral hydraulic cylinders 3
pieces top two pieces beam mechanically Move
Mechanical compression setting
more photos an questions
pressure 100 t
Bojaal9pfg
distance between columns 1500 mm
stroke 380 mm
working feed 2,47 mm/sec
700
adjustment of press crosshead 1500 mm
slide adjustment -horizontal 1740 mm
feed speeds 7,54 mm/sec
return speed 9,06 mm/sec
Pressure power 258 bar
table-size 1740 x 1396 mm
total power requirement 2,2 kW
weight of the machine ca. 2060 kg
dimensions of the machine ca. 1,74 x 2,07 x 2,04 m
This 100 ton straightening press has a manually movable portal and is
exclusively made in the Netherlan...
In this offer you acquire a used colour production system "Minolta Bizhub Press C1070".
Item for sale:
1 x Minolta Bizhub Press C 1070 with the following equipment:
incl. Booklet Finisher FS-612
incl. Relay Unit RU-516
incl. Paperdeck LU-202
incl. Fiery E200-02
Counter readings:
Total: Approx. 558,434 pages
Colour: Approx. 532,384 pages
Black: Approx. 26,050 pages
Bw3wyiag
Consumables:
Drum Unit BK: 41%
Drum Unit C: 76%
Drum Unit M: 76%
Drum Unit Y: 76%
Condition:
...
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
Laenge: About 2430 mm
Width: About 1520 mm
Hpxmute
Heithrange: About 540 mm
Press the door lignum-EVERT JOHANSON TPBH 2300X1300
Press bonding framework of internal and external doors "
Companies Lignum-Evert Johanson
--- pneumatic-hydraulic press
bonding size maximum dimensions: Length 2330 mm Width 1330 mm
adjustable working pressure and the size of the door bonded
T20yo98un
hardware give one year warranty
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
adjustments 120 mm
total power requirement 1,5 kW
weight of the machine ca. 430 kg
Benmpar7my
dimensions of the machine ca. 1,2 x 0,8 x 1,75 mm
The PB 50-3 H is a hydraulic profile bending machine: we produce
thisprofilebender in Europe and deliver it directly from our stock.
This hydraulic profile bending machine has a shaft diameter of 50 mm and 3
driven rolls. It is easy to switch between working with two or three driven
rolls ...
In this offer you will purchase a new colour production system "Xerox Versant 180 Press ".
Object of sale:
1 x Xerox Versant 180 Press with the following equipment:
incl. Paperdeck A-CF01
incl. Booklet Maker A-FN13
Bm9f0ajn08
counter readings:
Total: Approx. 13,970 pages
Colour: Approx. 5,369 pages
Black: Approx. 8,601 pages
Condition:
This offer is for a used device, which under certain circumstances may show signs of use.
(minor scratches or yellowing).
The device is te...
50 mm
roll diameter 148 mm
revolutions per minute 13,6/27,2 U/min
total power requirement 1/1,4 kW
3ojke8o
weight of the machine ca. 420 kg
dimensions of the machine ca. 800x920x1450 mm
pressure 15 t
Vy2xfohj
stroke 160 mm
press capacity 147,15 kn
Pressure power 382,2 bar
column daylight 555 mm
80
tank capacity 1,5 l
distance between columns 134 mm
weight of the machine ca. 134 kg
dimensions of the machine ca. 825 x 600 x 1880 mm
pressure 400 t
stroke 450 mm
throat 450 mm
work speed 2,1 m/min
ajustment speed 9,5 mm/sec
return speed 12,5 mm/sec
pressure 320 bar
diameter of piston 60 mm
opening stroke 1100 mm
table-size hinten / back 2500 x 750 mm
Table dimensions Main 750 x 750 mm
total power requirement 11 kW
weight of the machine ca. ca. 20 t
dimensions of the machine ca. 3,75 x 2,5 x 0,95 m
The straightening and forming presses have been specially developed
for straightening and bending profiles, bars and beams. ...
pressure 30 t
Fhjpujh2k
stroke 160 mm
table surface area 560 x 255 mm
table length 695 mm
table width 230 mm
Pressure power 374,6 bar
piston stroke 160 mm
tank capacity 1,5 l
column daylight 560 mm
diameter of piston 110 mm
weight of the machine ca. 175 t
dimensions of the machine ca. 830 x 640 x 2030 m
pressure 10 t
plate thickness 4 mm
no. of strokes 26,6 Hub/min
stroke speeds 1,7 sec.
Nlmbf
total power requirement 2,2 kW
weight of the machine ca. 190 kg
dimensions of the machine ca. 0,68 x 0,44 x 1,214 m
Used Body press
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
