Used Drive Module for sale (34,120)

Condition: used, Year of construction: 2012, operating hours: 4,202 h, fuel type: diesel, Weights Empty weight: 7.450 kg Iijdpfxexc Dlms Aabeh Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Identification Serial number: 901133 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Max. horizontal reach: 830 m Transport dimensions (LxWxH): 7.03x2.3x2.37 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2023, operating hours: 3,421 h, functionality: fully functional, overall weight: 592 kg, total length: 940 mm, total width: 850 mm, total height: 1,805 mm, power: 30 kW (40.79 HP), pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Top Offer: ALMIG F-DRIVE 30 Compressor × BOGE DS40-2 Refrigeration Dryer! Secure a nearly new and high-performance ALMIG F-DRIVE 30 compressor (year of manufacture 2023) with a modern water separator, efficient heat recovery, and a BOGE DS40-2 refrigeration dryer (year of manufacture 2022). Description: We are selling an almost new, variable speed-controlled ALMIG F-DRIVE 30 compressor, year 2023. This screw compressor offers state-of-the-art technology for maximum efficiency and reliability. Variable speed drive means the motor speed is adjusted to flexibly control pressure and output flow according to the load requirements. (This results in significant cost savings, less wear, and a longer service life compared to a fixed-speed compressor.) Attached you will find the manufacturer's brochure for the F-Drive series! Technical Data: Manufacturer: ALMIG Model: F-Drive 30 Year: 2023 Warranty: 5-year manufacturer warranty Operating hours: only 5,772 h Load hours: only 3,421 h Design: Screw compressor, direct drive Operating pressure: 5–13 bar Free air delivery: 0.62 to 6.15 m³/min Max. pressure: 13 bar Power consumption: 30 kW Dimensions: 940 mm (L) x 850 mm (W) x 1,805 mm (H) Weight: 592 kg Features: Includes water separator 275125-WS and integrated heat recovery system Special Features: - Heat recovery: The compressor is equipped with an integrated heat recovery system. Up to 96% of waste heat can be recovered and used, for example, for hot water generation (up to 70°C) or heating purposes. The compressor is already equipped with the necessary flow and return connections. (Heat recovery can be enabled as required.) - Water separator (B40-230-159-1 / 275125-WS): Removes free water droplets from the compressed air. Additional information: - Video available: Upon request, a video of the unit in operation can be provided. Note ALMIG compressor: The original price with this configuration was approx. €27,000. Note BOGE DS40-2: The original price was €4,500. Ijdeuhhm Ropfx Aaboih Please contact us for more information or to arrange a viewing appointment.

Condition: ready for operation (used), AGIE PMO-02 A2 Power Module Output 614030.5, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Isdpfxei D Txfs Aabjih

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Hand crank with indexing plate and scissors - Scale ring for reading at the crank - Readable degree scale on the rotary table - Swing-out worm for direct indexing Isdoxcbpijpfx Aabsih - Clamping via clamping screw - 14 mm T-slots in the table plate - Universal joint drive - Built-in indexing plate: 17-25-30-39-47-57 - Rotary table drive suitable for WMW HECKERT console milling machine Type FU 315 E, possibly also for FU 400 E - Dividing head (indexing plate = 20) suitable for WMW HECKERT console milling machine Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: good (used), Year of construction: 2012, Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module from CNC machining center Santenberg GTC S 2 -Type: EMB9352-E -Input: DC 725V Imax = 25A Iijdsi Sdgyjpfx Aabjh -Output: Pav= 19 kW Ppk = 32 kW -Quantity: 1x brake module available -Dimensions: 55/380/H185 mm -Weight: 2.3 kg

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 454 kg, empty load weight: 1,971 kg, construction height: 2,310 mm, fuel type: electric, total length: 2,440 mm, drive type: Elektro, construction width: 1,160 mm, working height: 9,960 mm, Scissor lift Iiodpfx Aasw Uavyobsh Technical condition: New

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 131G9799, input voltage: 400 V, input current: 647 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, continuous power: 355 kW (482.67 HP), Exact type designation: Danfoss FC-302P355T5E54H2XGC3XXSXXXXA6BXCXXXXDX Output power and output current: 355kW | 658A 131G9799 Iisdpsv Hbvuefx Aaboh ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Only 1 piece left in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready for immediate use.

Condition: good (used), WEILER MATADOR lead and feed screw lathe - Heidenhain - Digital Readout - ND 780 - Centre height: 140 mm - Centre distance: 500 mm - Swing over cross slide: 155 mm - Spindle speed range: 20-3,500 rpm - Automatic longitudinal/cross feeds - Thread cutting: metric/inch etc. - Spindle bore: 36 mm - Tailstock: MT3 Isdpoxhz T Eefx Aaboih - Three-jaw chuck - Collets – quick-change system - Emergency stop - Chuck guard - Documentation Dimensions: LxWxH 1.6x0.7x1.6 m / Weight: 750 kg Errors and omissions excepted

Condition: used, mileage: 1,94,799 km, lifting height: 44,200 mm, Year of construction: 2011, Drivetrain Drive: Wheel Weights Empty weight: 33.000 kg Functional Lifting capacity: 40.000 kg Identification Serial number: WMG3208H8CZ000936 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Iedpfewht U Djx Aaboih Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.7x2.5x3.6 Additional information Please contact PFEIFER GROUP for more information

Condition: used, 3-Roller Ring Bending Machine with Hand Crank Drive Manual Section Bending Machine KNUTH Type HRB 30 M Year of manufacture: approx. 1995 Shaft diameter: Ø 30 mm Top roller diameter: Ø 98 mm Bottom roller diameter: Ø 116 mm Drive rollers: 2 units Performance data with standard roller set: Square steel (at Ø 150 mm): up to 18 x 18 mm Round steel (at Ø 180mm): up to Ø 18 mm Iiodpfjxbtxtjx Aabeh Flat steel, flat (at 150 mm): up to 50 x 8 mm Flat steel, edgewise (at Ø200 mm): up to 30 x 10 mm T-section: up to 20 x 20 mm - Driven by hand crank - Millimeter scale for pressure roller adjustment - Standard roller set with 80 mm roller width - Top roller with wire groove, bottom rollers 2-piece Machine dimensions L x W x H: 750 x 330 x 1450 mm Weight: 160 kg In good condition

Condition: good (used), Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: GfA, Elektromat Type SE 3.5.120-25.00 Iisdpfx Aajxb Rppebjh -Speed: 120/20 rpm see photos nameplate -Motor: Siemens, power 0.37 kW -Shaft: Ø 25 x 100 mm -Protection class: IP 55 -Dimensions: 375/140/H260 mm -Weight: 11.6 kg

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 454 kg, empty load weight: 1,971 kg, construction height: 2,310 mm, fuel type: electric, total length: 2,440 mm, drive type: Elektro, construction width: 1,160 mm, working height: 9,960 mm, Scissor lift Iiedpfx Aajw Ezqzobjh Technical condition: New

Condition: used, mileage: 2,21,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Iiodowwqbyspfx Aabjh Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Part-turn actuator, pneumatic cylinder, rotary vane actuator, swivel module -Manufacturer: Rotech, TCR module for rotary actuator unused -Type: TCR3MVAZ Iijdpfexbzt Eox Aaboh -Number: 2x module available -Price: per piece -Dimensions: 160/70/H105 mm -Weight: 0.4 kg/piece

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 454 kg, empty load weight: 1,971 kg, construction height: 2,310 mm, fuel type: electric, total length: 2,440 mm, drive type: Elektro, construction width: 1,160 mm, working height: 9,960 mm, Scissor lift Technical condition: New Iedsw Ezq Ispfx Aabeih

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 350 kg, empty load weight: 3,701 kg, construction height: 2,770 mm, fuel type: electric, total length: 3,110 mm, drive type: Elektro, construction width: 1,410 mm, working height: 15,950 mm, Scissor lift Technical condition: New Iijdpow Eztcofx Aabeh

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Isdpfoxg U I Hjx Aabsih

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 900 kg, construction height: 1,880 mm, fuel type: electric, total length: 2,000 mm, drive type: Elektro, construction width: 810 mm, working height: 6,300 mm, Scissor lift Iisdpfx Aaexg U Igobeh Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 900 kg, construction height: 1,880 mm, fuel type: electric, total length: 2,000 mm, drive type: Elektro, construction width: 810 mm, working height: 6,300 mm, Scissor lift Technical condition: New Iedpfx Aoxg U Iteaboih

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 900 kg, construction height: 1,880 mm, fuel type: electric, total length: 2,000 mm, drive type: Elektro, construction width: 810 mm, working height: 6,300 mm, Scissor lift Iodpfx Aexg U Imjabjih Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Isdjxg U H Nopfx Aabsih Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Iiedpfx Aasxg U Iajbjh Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Ijdpfxjxg U H Ao Aabjih Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Iisdsxg U Hvjpfx Aaboh Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Iedpfx Aaoxg U Hpebsih