Used Drive Module for sale (23,255)

Condition: used, Transistor pulse inverter for three-phase feed drives with analog control, servo controller SIEMENS type Simodrive 610 6SC6101-3A-Z Fab. No.: A 822M103 Z = A30+A20+A18 Hjdpfx Agjh D Syvjwefd Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters have been developed to supply the 1FT5/1FS5 three-phase servo motors. The dynamic characteristics of these motors are to be used optimally. The pulse inverters can be used for a wide variety of tasks by equipping the power section accordingly. This flexibility is further increased by expansion modules for the power section. Supply voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in delivery) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 Number of feed axes: 4 Speed reference: +-10 volts Auxiliary voltage: 24 volts Relay contact for messages fault/ready for operation dimension WxHxD: 339 x 440 x 300 mm Weight: approx. 25 Kg The servo drive is still ready for operation in a Gildemeister GDM42. Further components from the Gildemeister you will find under stock numbers: 60343, 60347, 60348

Condition: used, 6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo regulator, frequency converter, drive controller for robots FANUC type A06B-6105-H003 No. V07Z08282 NEW / unused Input voltage: 200 - 240 VAC Rated power: 1.5 kW Hfedpekpwu Rsfx Agwsd Number of axis outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Installed PCBs: A16B-2000-0063/07D, A16B-3200-0440/05C - Plexiglass cover not included in delivery Dimensions (W x H x D): 70 x 170 x 380 mm Weight: 16.5 kg As new / unused in opened original box from stock liquidation

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Hfodpoflt Egjfx Agwed Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack Hfsdpfsflt Edjx Agwed - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Air operated double diaphragm pump DEPA Type DH40-FA-ZRT Air operated diaphragm pump, double pump Serial No.: B1802498 Year of manufacture 09.05.2018 Hfsdpoib D H Uefx Agwod Temperature: max. 130°C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height product filled: approx. 9 m Operating pressure: max. 7 bar air connection: 3/8" suction connection: 1 1/2" pressure connection: 1 1/2" - self-priming - aluminum housing - Diaphragm plate made of stainless steel - Diaphragm made of nopped E4® PTFE compound - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm own weight: 15 kg very good condition

Condition: used, Static frequency inverter Manufacturer: GARBE LAHMEYER & Co. AG Type SU3760.2aFZ231 Year of manufacture: 1989 Make No.: A2K 60229 0001 Rated power 500 kVA Hedpohutxzofx Agwsfd Type of current D Mains voltage 380 Volt Input frequency 50 Hz Input current 760 Amp. Type power input 760 Amp. Output voltage 380 Volt Output frequency 50 Hz Output current 760 Amp. Type power output 760 Amp. - Control unit GARBE LAHMEYER type AEB 60 Cabinet dimensions (W x H x D) 2250 x 800/900 x 2550 mm Transport dimension (W x H x D) 2430 x 1100 x 2700 mm Weight 1660 kg

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Hsdpjflt Ebjfx Agwjfd Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Hfodpfxjd D Dh Ao Agwjd Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. 0239398K Year of construction: 1993 Rated power: 6 kW Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm Hodpfeqv I S Sox Agwofd External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, Wall-mounted slewing jib crane with hoist, slewing drive, and trolley ABUS Wall-mounted Slewing Jib Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Slewing range: 180° Outreach, jib tip to wall: approx. 6640 mm Minimum outreach (crane hook to wall): approx. 1450 mm Maximum outreach (crane hook to wall): approx. 6250 mm Trolley travel distance: approx. 4800 mm Hook distance from jib tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Jib length without wall bracket (slewing bearing): 6530 mm Total height with wall bracket (slewing bearing) and mounted components: 2590 mm (overall height) - Jib profile: double-T steel beam (height 600 x width 220 mm) - Jib electrically slewing via geared motor (2 speeds) - Electric slewing drive with limit and preliminary limit switches - Slewing angle end positions with electric end and preliminary limit switches - Painted in ABUS Yellow (original paint) - 2 wall flanges 340 x 280 mm, each with 6 Ø 27 mm holes - Mounting surface for wall flanges (W x H): 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Rated load: 3200 kg Reeving: 4/1 Lifting height: max. 6 meters Lifting speed: 5 meters/min. Creeping (fine) lifting speed: 0.8 meters/min. Trolley travel speed: approx. 4.5 and 19 m/min. - Control via radio remote and emergency control via pendant on cable Hfjdpfxewzmi Is Agwed - Trolley travel with electric drive, with limit and preliminary limit switches - Approx. 20 operating hours - Last inspection: April 2024 at 19 operating hours Wire rope hoist weight: 250 kg Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight jib with wire rope hoist: 1500 kg Very good condition

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Hfedpfx Agjptlbljwsd Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: excellent (used), Year of construction: 2021, operating hours: 137 h, lifting height: 5,550 mm, fuel type: electric, color: other, General information Year of manufacture: 2021 Technical information Drive: Wheel Empty weight: 1.216 kg Dimensions (LxBxH): 200 x 81 x 197 cm Functional Lifting capacity: 227 kg Working height: 755 cm CE mark: yes Hfjdpsyupc Aofx Agwjd Condition Technical condition: very good Visual appearance: very good Damages: none Condition CE type: CE

Condition: used, Year of construction: 2007, operating hours: 5,222 h, machine/vehicle number: B195-02-6078, fuel type: diesel, Empty weight: 12.400 kg Lifting capacity: 500 kg Working height: 2.150 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Hjdpfx Aoymi T Sjgwsfd Transport dimensions (LxWxH): 4.73x2.44x3.65 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2000, functionality: fully functional, all sawmill equipment: head saw, edger, roller conveyor, extraction system, sharpening machine, four-wheel drive forklift. Hjdpfx Agoydvpzewefd

Condition: excellent (used), Year of construction: 2021, operating hours: 77 h, machine/vehicle number: 52753030086998, load capacity: 227 kg, overall weight: 1,329 kg, product width (max.): 820 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Hsdpfx Aoyrwgdsgwefd

Condition: excellent (used), Year of construction: 2021, operating hours: 205 h, machine/vehicle number: 52753006166358, load capacity: 227 kg, overall weight: 1,329 kg, product width (max.): 820 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Hedpfxjyrwf Tj Agwefd

Condition: excellent (used), Year of construction: 2021, operating hours: 172 h, machine/vehicle number: 52752953114966, load capacity: 227 kg, overall weight: 1,329 kg, product width (max.): 820 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Hedpfxjyrwf He Agwefd

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 52750063763798, load capacity: 227 kg, overall weight: 2,090 kg, product width (max.): 810 mm, working height: 9,850 mm, enginetype: Electric, manufacturer: Genie Hsdpfx Ageyrwdcswofd

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 52750053278038, load capacity: 227 kg, overall weight: 1,300 kg, product width (max.): 820 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Hfjdpjyrwc Sjfx Agwod

Condition: excellent (used), Year of construction: 2021, operating hours: 93 h, machine/vehicle number: 52735390155094, load capacity: 227 kg, overall weight: 1,500 kg, product width (max.): 770 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Hfsdoyrwcxopfx Agwod

Condition: excellent (used), Year of construction: 2021, operating hours: 76 h, machine/vehicle number: 52753042735446, load capacity: 227 kg, overall weight: 1,329 kg, product width (max.): 820 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Hjdpfx Agoyrwb Ujwefd

Condition: excellent (used), Year of construction: 2021, operating hours: 206 h, machine/vehicle number: 52753069965654, load capacity: 227 kg, overall weight: 1,329 kg, product width (max.): 820 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Hsdjyrwbzopfx Agwsfd

Condition: excellent (used), Year of construction: 2021, operating hours: 95 h, machine/vehicle number: 52753048338774, load capacity: 227 kg, overall weight: 1,329 kg, product width (max.): 820 mm, working height: 7,850 mm, enginetype: Electric, manufacturer: Genie Hsdpsyrwbuofx Agwefd

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Hfedeyr T Nbepfx Agwed Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Hedpfx Ageyr T Nhewofd Technical condition: New