Used Driver Disk for sale (7,956)

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Photo: Short cone 11 -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm Ihedjh Hbw Eopfx Abcew -T-slot: Slot width 22 mm -Weight: 109 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening Ihedsxuflfspfx Abcsw -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Condition: good (used), friction wheel, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shrink disc, shaft-hub connection -Manufacturer: Ringspann, shrink disc: for crane chassis -Type: RLK 603 S-85x155 .: 1048 1782 -Hole: Ø 85 mm -Quantity: 4 pieces available -Price: per piece -Dimensions: Ø 155 x 48 mm Ihsdpfx Abev Hw Igjcjw -Weight: 3.5 kg/piece

Condition: repair required (used), Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 Ihodpfsda Ny Iex Abcjw -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 Iodjrv Avgspfx Abcehw -Front dimension: Ø 63 mm -Recording: see photos -Total dimensions: Ø 80 x 235 mm -Weight: 3.5 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck Iodpfxod E Tfwj Abcohw -Mouth size: Ø 400 mm -Cone size: 6 -Short cone mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 450 mm -Conical mount: Ø 110 mm -Groove: 16 mm -Weight: 66 kg Ijdsb A Szgepfx Abcohw

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver, roller tip -Manufacturer: Neidlein, face driver mount: MK5 -Type: OEX 5 Isdpfxsu Tlg Ej Abcshw -Front dimension: Ø 39 mm -Dimensions: Ø 75 x 185 mm -Weight: 2.6 kg

Condition: good (used), Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 8, bolt circle diameter Ø 171.4 mm -Weight: 54 kg Iedpfsdu Ufzox Abcohw

Condition: new, Year of construction: 2026, Industrial bench grinder equipped with two 300 mm diameter discs. The stable and rigid construction ensures quiet and vibration-free operation. Machine description Rotor design based on bearings from the world's best manufacturer NSK, ensure quiet and smooth operation and a long service life of the machine Powerful drive motor with high torque Adjustable guards made of durable plastic for effective spark protection Fitted with 35 mm diameter suction port, with possibility of connecting an extraction unit Adjustable workpiece supports Unlike the competition, the machine is equipped with industrial bearings from world-class manufacturer NSK. Technical specifications DIMENSION OF THE DISPLAY 300 x 50 mm disc, grinding wheel bore 75 mm GRINDING WHEEL GRIT K 36 / K 60 suction nozzle diameter 2 x 35 mm NUMBER OF RPM 1450 rpm MOTOR POWER S1 2,2 kW MOTOR POWER S6 3,0 kW VOLTAGE 400 V Iodjvlkwfopfx Abcehw DIMENSIONS 700 x 430 x 1170 mm WEIGHT OK. 78.5 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck Iedpeduiw Tefx Abcohw -Mouth size: Ø 400 mm -Conical mount with groove: Ø 105 mm -Passage: Ø 80 mm -Weight: 35 kg

Year of construction: 2025, operating hours: 550 h, condition: as good as new (ex-display), functionality: fully functional, Alzinger Lepton 5100 – Solution for the BioWaste Ordinance (BioAbfV) Ideal for biowaste separation: Effortlessly meet the statutory 1% limit! As of May 2025, biowaste may only be processed if the contaminant content is below 1.0% by weight. Our Lepton 5100 has been specifically designed for this requirement. Lepton 5100 Advantages: Separation Instead of Shredding Gentle Bag Opening: Waste bags are reliably opened without shredding. A pre-shredder (slow-speed shredder) is not required! Maximum Film Size: Films remain largely intact and are effectively separated during the first screening process, before they fragment in the compost windrow due to turning, heat, and UV light. Highest Purity: Prevents microplastics in the process and ensures final product quality. Cost-effectiveness: Regulatory Compliance: Reliably achieves the sub-1% contamination threshold per BioAbfV. Process Optimization: Reduced effort in downstream cleaning. Isdeycup Rjpfx Abcehw Cost Efficiency: Significant savings on diesel and wear costs as no pre-shredder is required. Integrated Air Separator: No bulky additional machinery required, saving space and maintenance costs. Process Innovation (flexible control): Biowaste Processing (2-fraction): Reversible middlings conveyor combines medium and fine fractions for a homogenous result. Outcome: Clean target fraction for digestion/composting plus oversize fraction with films/contaminants. Compost Refinement (3-fraction): Separation into premium compost, structural material, and energy wood. The ballistic effect extracts stones, glass, and hard plastics via the stone fraction conveyor. Integrated air separators remove remaining film residues. Current Application: Successful biowaste processing for wet fermentation. The machine delivers a contaminant-free, homogenous fraction for the fermenter, preventing floating or sinking layers. Inspection & Demonstration: On-site demonstration possible while in operation at our partner facility in the Kelheim district. Processes can be discussed directly with the plant operator. Technical Data: Model: Lepton 5100 | Year of manufacture: 2025 | approx. 550 hours Location: D-84069 Schierling | Availability: short notice Screen decks: Deck 1 (52 mm), Deck 2 (43 mm) Features: Variable dosing roller, volume measurement, air separator preparation, compressor, LED package, radio remote control. Drive: Diesel-electric (Perkins 58 kW, no AdBlue) + option for external power supply (400V 63A). Transport dimensions: L: 11.97 m / H: 3.98 m / W: 2.53 m (No special permit required). Screening material: Compost, green waste, biomass, wood, municipal waste, RDF. Condition: Very good, immediately operational.

Condition: good (used), driver's seat, forklift seat, tractor seat, tractor seat -Manufacturer: Klepp, driver's seat with suspension Ijdpfx Absx Ivrxocohw -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm -Weight: 20 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 380 mm -4 jaw chuck -threaded mount Ijdpfx Aob A Iqqsbcshw -Weight: 40 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 560 mm -Short taper mount: Ø 122 mm Isdpfx Asb A Iuyjbcohw -Bolt circle: Ø 170 mm -Weight: 100 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8" 1 1/2" -Through hole: Ø 84 mm -Weight: 56 kg Iodpfx Abodfv Ilscohw

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 320 mm - Mounting thread: Ø 60 mm inside Iodpfx Abob A Ih Aecjhw -Weight: 30 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck Ihedpfsb A Rddex Abcew -Feed size: Ø 450 mm -4: Jaw chuck -Receptacle: Thread -Internal thread: Ø 69 mm -Weight: 40 kg

Condition: good (used), End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm Ihsdex H Ip Hspfx Abcew -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. Ihodjwy Uyxjpfx Abcjw System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Iodjwzahdspfx Abcehw Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: ready for operation (used), Panasonic DV47M02AVXAA P356-02AVXAA Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Ihjdei Eccfspfx Abcow

Condition: ready for operation (used), Agie MJG 2119 A Zch 615072.6 + Step motor driver REX MJG 2113 A 629753.5, used, normal signs of wear, 100% functional Ijdpfx Aei D Twwjbcshw

Condition: ready for operation (used), AGIE 622064.4 Step Motor Driver Isotorque MJG2129E , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Iedoi D Tvgjpfx Abcehw

Condition: ready for operation (used), Panasonic Panadac 337N-01 Pulse Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Iodpfx Aoi Eccmjbcohw