Used Driver Disk for sale (9,272)

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm Dlodpfovnmnrex Addoa weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm Dedpjxuv Udsfx Addela In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding Dsdpfx Aexqrbxeddjla system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: excellent (used), Year of construction: 2012, DISKUS DDS 750 XR – Technical Specifications Machine type: vertical double-disc grinding machine Model: DDS 750 XR Grinding wheel diameter: 750 mm Maximum grinding width (through-feed): 180 mm Maximum material thickness (through-feed): 30 mm Maximum grinding width (plunge-cut): 300 mm Maximum material thickness (plunge-cut): 80 mm Grinding spindle 1 power: 48 kW Grinding spindle 2 power: 48 kW Grinding wheel surface speed (max): 63 m/s Coolant delivery: through the spindle center Feeder type: rotary feeder Dljdewwrqcopfx Addsa Feeder speed range: 20 mm/min to 240 mm/min Control system: Siemens 840 D CNC Total machine height: approx. 3,100 mm Overall weight: approx. 13,000 kg Footprint requirements: length approx. 4,900 mm, width approx. 5,000 mm Construction features: triangular rigid frame, linear-guide spindles, 16 CNC axes, central lubrication, coolant filtration

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2179, The Diskus DDS 750 XRE is a double-sided surface grinding machine from Diskus's DDS series, designed for precision flat and plunge grinding. Although the exact year of manufacture (2012) is not specified, the technical data for the XRE variant are as follows: Dedpfx Adjwnrv Tedsla Technical Data of the Diskus DDS 750 XRE * Grinding wheel diameter: 750 mm * Maximum workpiece diameter: * Through-feed grinding: 420 mm * Plunge-cut grinding: 300 mm * Grinding width: * Through-feed grinding: up to 180 mm * Plunge-cut grinding: up to 300 mm * Maximum material thickness: * Through-feed grinding: 30 mm * Plunge-cut grinding: 80 mm * Grinding spindle drive power: * Spindle 1: 48 kW * Spindle 2: 48 kW * Feed system: rotary feed * Feed rates: * Maximum: 20 mm/min * Minimum: 240 mm/min * Dimensions: * Required floor space (L × W): 4900 mm × 5000 mm * Total height: 3100 mm * Weight: approx. 13,000 kg * Control system: Siemens 840 D CNC * Measuring control: Diskus IONIC 17A This machine is particularly suitable for machining workpieces made from corundum, CBN, or diamond and is used in sectors such as the automotive industry, gearbox manufacturing, hydraulics and pump technology, as well as the bearing industry. For further information or specific inquiries regarding the year of manufacture 2012, I recommend contacting Diskus Werke Schleiftechnik GmbH directly.

Condition: good (used), Industrial dishwasher. Brand - GRANULDISK. Model - GD 900 S Overall dimensions - Width - 146 cm. Depth - 109 cm / doors open - 157 cm. Height - 203 cm (plus/minus 25 mm). Weight, empty - 480 kg. Dlodpfjxaz A Dox Addoa Weight, full - 680 kg. Voltage - 400V, 50Hz. Max power - 22kW. CLH.24.

Condition: good (used), machine/vehicle number: 7351, Manufacturing origin Germany Voltage 380/50/3 Netweight with/without acc. 4700/4000 kg Dimensions 3700x2000x2550 mm Total power Custom position 8460.29 20 Colour TECHNICAL DATA Grinding-wheel dia. 457 mm Grinding capacity 1 to 20 mm Winding width 10 to 60 mm Grinding wheel adjustment on each side 150 mm Discus grinding wheel 457 x 75 x 76 mm Total required power 32 to 42 HP Grinding procedure infeed grinding Grinding-wheel spindle 2 vertical spindles Working height with new wheel 95 mm One superior and one inferior grinding headstock Dia. 457 mm Rotation speed upper wheel 251 – 1254 rpm Lower 251 – 1254 rpm Surface speed upper wheel 60 – 30 m/s Dsdpeip A Uxjfx Addela Lower wheel 60 – 30 m/s Workfeed 21,8 to 215 mm/s errors and omissions excepted-data given without obligation

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders Dljdpfjxq Hkuox Addoa The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features Dlodot Hw Najpfx Addja * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1972, condition: ready for operation (used), A horizontal double-sided face and surface grinding machine Diskus is available. Grinding wheel diameter: 600mm, grinding wheel width: 150mm, workpiece dimensions X/Y: 1600mm/3000mm, machine dimensions X/Y/Z: approx. 5000mm/5000mm/3000mm, weight: approx. 11000kg. Documentation available. On-site inspection is possible. Dlsdpfx Adjw Azu Uodsa

Condition: used, TECHNICAL DETAILS - grinding wheel dimensions : 457 x 75 x 76,2 [mm] - lower and upper spindle holder headstock diameter : 457 [mm] - machining capacity width : 10-60 [mm] - work height with a new grinding wheel : 95 [mm] - upper grinding wheel rotation speed : 251-1254 [Rpm] - lower grinding wheel rotation speed : 251-1254 [Rpm] - tangential speed upper grinding wheel : 6-30 [m/sec] - tangential speed lower grinding wheel : 6-30 [m/sec] - part feed speed : 21 to 215 [m/s] - tension / frequency : 380 [V] / 50 [Hz] - intensity : 70 [A] - motor power : 2 x 11 [kW] - power : 35 [kW] - machine weight : 4700 [kg] Dodpfx Aou Hagpeddjla - floor space (LxDxH) : 3700 x 2000 x 2550 [mm] EQUIPMENT - trueing device

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Side Face Grinding Machine  This machine type is a machine with a motor-driven grinding spindle. Clamping and grinding of the workpieces is done with clamping devices adapted to the respective work. The devices are attached to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side surface grinding machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 litres Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! Djdpshtyudefx Addola International shipping costs on request!

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: Dedjt Hw N Hepfx Addola * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Soprel Rotodrive R083B30/04 servodrive motor, serial number as per photo, mounting hole spacing: 53 x 53 mm, drive shaft diameter: 11 mm, used, heavy signs of wear, 100% functional, scope of delivery as shown in the photos. Dlodpfx Adjx Dwb Dedea

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, Used machine - very good condition - checked and fully functional. NEW VERSION - AL7 Year of construction: 2016 Cutting technology and compactness Dlodpfxsx A U U Ej Addsa Universal bread cutter: cutting all types of bread (even fresh from the oven) without oiling the knife Soft sound: noise-optimized cutting Long service life of the circular knife due to special grinding Hygiene and handling Automatic start at the push of a button after closing the safety cover Automatic slice holder that supports the slices during the cutting process and thus facilitates the removal of bread Direct access to the knife area for cleaning and knife replacement security Reliable safety system with automatic gripping of the bread and automatic residual piece ejection Thanks to the absolutely secure locking of the lid, there is no risk of injury to the customer in the self-service area: there is no access to the knife or the gripper hook when the safety lid is open GS mark (mark of the trade association for tested safety / certificate of compliance with the requirements of the Equipment and Product Safety Act) Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, total length: 800 mm, total width: 700 mm, 6 x TREIF round blade bread slicers /each from €1,200 Dodex A Dnbopfx Addela from our facility in 75015 Bretten all fully operational and in working order Available together or individually Adjustable slice thickness, with function for precise halving of loaves, extremely compact dimensions (only approx. 80 x 70 cm), hygienic cutting without oil! 2 x Diskus 400, year 2010+2011 (400V) at €1,200 each 3 x Diskus 400+, year 2012+2012+2015 (400V) at €1,500 each 1 x Primus 400, year 2021 (220V) at €2,900 All prices plus VAT or by agreement (e.g., for export) Package deal available

Condition: used, functionality: fully functional, Year of construction: 2019, TRUMPF TruDisk 4006 (6 C) – High-Performance Solid-State Laser with KLH Cooling Unit RW 20/0 SK Description: The TRUMPF TruDisk 4006 (6 C) is an industrial high-power solid-state laser delivering 4 kW laser output, engineered for precise applications such as laser welding, cutting, and cladding. The system is distinguished by its high energy efficiency, stability, and outstanding beam quality. Combined with the KLH Kältetechnik RW 20/0 SK cooling unit, it is ideally suited for use in automated production lines, robotic cells, or CNC manufacturing systems. Dlodpexwc Trjfx Addja Technical Specifications Laser (TRUMPF TruDisk 4006 (6 C)) Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Model: TruDisk 4006 (6 C) Equipment No.: L4216M0390 Serial No.: 20-10-03-A604 Year of manufacture: October 2019 Rated voltage: 380 V (–10 %) … 460 V (+10 %), 3 AC + PE Power consumption: 22 kW / 23 kVA Nominal current: 32.5 A / 400 V Frequency: 50 – 60 Hz Protection class: IP 54 Weight: 820 kg Short-circuit capacity (SCCR): 50 kA CE marking: Present Technical Specifications Cooling Unit (KLH RW 20/0 SK) Manufacturer: KLH Kältetechnik GmbH, D-18209 Bad Doberan Model: RW 20/0 SK Model No.: 0393710 Serial No.: 17KLH00670 Year of manufacture: 2017 Refrigerating capacity: 10.2 / 12.9 – 20.4 / 21.5 kW Voltage: 400 / 460 V Frequency: 50 / 60 Hz Refrigerant: R134a (3.7 kg), hermetically sealed system Max. operating pressure: 20.5 bar CE marking: Present Automation Level: Designed for fully automated manufacturing systems. The laser is engineered for integration into robotic systems, CNC machines, or custom production cells and supports standard interface protocols (Ethernet, fieldbus, analog signals) for industrial automation.

Condition: used, Trumpf Dljdpfx Aswh Rnzoddja Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser beam source with KLH cooler The Trumpf TruDisk 4002 laser beam source is an industrial disk laser source (disk laser) from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of a beam source with associated cooler, but without optics and fiber optic cable. Technical Specifications Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10% ... 460 V +10%, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical Features: Water-to-water cooling Precise temperature control (typically 20–25°C) Refrigerant: R 404A Can be controlled via TRUMPF interface Required to comply with laser specifications Device Type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: used, Worm gear, bevel gear Manufacturer: Sew-Eurodrive Type: DFY112ML/TH Output speed: 1400 rpm Torque: 24 Nm Power: 6.6 kW IP65 Voltage: 50 Hz V 230/400v Power consumption: A 49.50/16.50 Speed: 3000 rpm Dlodpsudywgsfx Addea Gear ratio (i): 27.88:1 weight: 36 kg

Condition: ready for operation (used), SEW Eurodrive R17F DRS71M4 / TH geared motor SN: 01.1971210703.0008.14,used, good condition, 100% functional, scope of delivery as per photos Dlodjtwhr Uopfx Addja

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, DGUV certified until: 12/2026, total width: 650 mm, total height: 1,100 mm, nominal power: 2 kW (2.72 HP), input frequency: 50 Hz, year of last overhaul: 2025, Treif Diskus Smart Circular Knife Bread Slicer Stainless steel construction Max. 130 slices per minute Blade newly sharpened and coated Manual operation via rotary control Slice thickness adjustable from 4 - 24 mm Dimensions: 650 x 690 x 1100 mm (W x D x H) Maximum bread size: 300 x 200 x 160 mm (L x D x H) DGUV V3 tested – exclusively with us Connection: 400V, 16A CEE plug Used machine, cleaned with warranty + spare parts service Options: Delivery service Maintenance contract Spare blade E-Box Service package Delivery service Installation & commissioning Visit our large bread slicer exhibition! Dsdpfswbm Rxex Addsla

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0012, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Protection class: IP54 Power: 16kW/17 kVA 24A at 400V Dodpfjwq Rmpox Addola Frequency: 50-60 Hz Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a robust and powerful laser system, perfectly suited for demanding industrial applications. It features high precision and efficiency, enabling fast and high-quality cutting operations on various materials. Thanks to its compact design, the system can be easily integrated into existing production processes.

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 20-10-03-A105, TRUMPF TruDisk 5001 (6 C) – High-Power Solid-State Laser Description: The TRUMPF TruDisk 5001 (6 C) is an industrial high-power solid-state laser engineered in Germany, designed for demanding applications such as laser welding, laser cutting, cladding, and surface processing. The TruDisk series is renowned for its outstanding beam quality, long-term stable performance, and reliability in continuous 24/7 operation. This laser is ideally suited for integration into automated production cells, robotic systems, or CNC machinery. Technical Data: Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Model: TruDisk 5001 (6 C) Equipment No.: L4211M2236 Djdpfx Adexv D Alsdjla Serial No.: 20-10-03-A105 Year of manufacture: April 2017 Rated voltage: 380 V (–10 %) … 460 V (+10 %), 3 AC + PE Power consumption: 28 kW / 29.5 kVA Rated current: 42 A / 400 V Frequency: 50 – 60 Hz Protection rating: IP 54 Weight: 820 kg CE marking: present Degree of Automation: Suitable for fully automated production lines. The TruDisk 5001 can be fully integrated into robotic or CNC controls via fieldbus, Ethernet, or analog interfaces and is prepared for Industry 4.0 applications.

Condition: new, SEW Eurodrive R17F DRS71M4 / TH Gear motor SN:01.1736146301.0006.11 ,unused, 100% functional, scope of delivery according to photos Dsdpfji D N Rujx Addsla

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0011, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Protection rating: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Dledpfxowq Rhmj Addsa Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a powerful and robust laser system, ideally suited for demanding industrial applications. With its high precision and efficiency, it enables fast and high-quality cutting processes with various materials. The compact design ensures easy integration into existing production lines, while the innovative technology guarantees stable and long-lasting performance.