Used Dedusting for sale (176)

Year of construction: 2002, condition: used, machine/vehicle number: 200212102, Technical data: - Manufacturer: Heesemann - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Ljdow Dplwepfx Aaboah Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized -Without own control (A new control can be offered as an option) - Location: Blomberg camp

Condition: excellent (used), Year of construction: 2020, L+M EcoCell 3.9-1200 C Dust Extraction System TECHNICAL DATA Manufacturer: L+M AG Model: EcoCell 3.9-1200 C Year of Manufacture: February 2020 Airflow Volume: 3,000 m³/h Voltage: 400 V Current Draw: 7.60 A Power: 5.50 kW Frequency: 50 Hz ATEX Compliance: ATEX 2014/34/EU Control System: Reco RM-DPC Micro FP Filter Status Display: FC-240 Spark Detection: Control Logic PAN-705 Spark Control Panel Filter Elements: 9 units SCOPE OF DELIVERY Includes (not an exhaustive list): - L+M EcoCell 3.9-1200 C dust extraction system - Filter status display - Spark monitoring system - 9 x filter elements - VDL rotary airlock with motor drive - Control cabinet with operator controls - Additional WESCO separator Laedpfx Aaexflx Teboh Exact scope of delivery as shown in the photo series The L+M EcoCell 3.9-1200 C dust extraction system was built in February 2020 and offers a high-performance and safe solution for industrial extraction and filtration tasks. With an airflow volume of 3,000 m³/h, a power rating of 5.50 kW, and robust ATEX certification according to 2014/34/EU, the system is ideally suited for use in hazardous (explosive) environments. It features a state-of-the-art Reco RM-DPC Micro FP control unit and an FC-240 filter status display for precise system monitoring and management. For added safety, it is equipped with a PAN-705 spark detection system. Nine high-performance filter elements ensure efficient separation of dust particles. The configuration also includes a motor-driven VDL rotary airlock, a control cabinet with operator elements, and an additional separator from WESCO. This combination guarantees a reliable, safe, and durable dust extraction solution for demanding industrial applications. No guarantee is provided for the accuracy, completeness, or timeliness of the information.

Condition: ready for operation (used), Year of construction: 2021, A wet extraction system Ulrich Anlagen und Industrieservice is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, particle size: less than 1µm, separation efficiency: 97.5%, control system: Siemens S7. Including buffer tank, Almatec AHS 25 heavy-duty membrane pump, MSE 470-30 chamber filter press, working platform, stainless steel filtrate tank and discharge and cross conveyor screw. Documentation available. On-site inspection is possible. Laodpjv I Db Njfx Aabeh

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 22924, Exhaust Air Dust Extraction System Extraction unit dimensions: Length: 1100 mm Width: 1100 mm Height: 1950 mm Filter housing dimensions: Diameter: 900 mm Height: 1400 mm Control cabinet dimensions: Width: 400 mm Height: 600 mm Depth: 300 mm Laodjv Scfuspfx Aabjh You are welcome to arrange an appointment for an on-site inspection.

Condition: ready for operation (used), Year of construction: 2019, A dust extraction system is available. 1) Filter unit FAV FSR219/200-FDK, year of construction: 2019. 2) Fan intensive filter RM 50-N-60, air volume flow: 20000m³/h. 3) Intensive filter fan RM 28-N-45, air flow rate: 6900m³/h. 4) Fan intensive filter RM 50-N-60, air flow rate: 20000m³/h. Documentation available. On-site inspection is possible. Lasdpfev Dwi Sex Aabeh

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Laedpfx Aoxn Rgueaboh Warehouse No.: 1051

Condition: ready for operation (used), Overall dimensions: 2500 x 6000 mm Lsdpfxswfrl Aj Aabsah Cyclone diameter: 2500 mm Cyclone height: 6000 mm

Year of construction: 2015, condition: used, Rapid G600-150 Granulator; Lasdsxpw R Aopfx Aabsh drive motor 90kW; infeed conveyor system; dedusting system; big bag unloading unit; designed for shredding of 6-layer boards 1000x1600x10mm; deep drawn and welded tanks to a height of max. 5500mm; capacity 1200 to 2500kg/h Condition: Good

Year of construction: 1994, condition: used, functionality: fully functional, Plastic granulator with feed conveyor and dedusting system Lodpfswtfavex Aabjah The CONDUX plastic granulator CS 300/300-S-II is a reliable solution for the size reduction and granulation of plastics. Equipped with an integrated feed conveyor and dedusting system, it ensures continuous processing in a clean working environment. Its robust design guarantees durability and consistent performance, making it ideal for recycling and recovery processes.

Condition: excellent (used), Year of construction: 2021, Dust suction hood 180 mm Motor output 3 kW Air consumption 2900 m³/h Dimensions (L/W/H) 1660 x 1020 x 1990 mm Laedpexpxtlofx Aabjh Weight 410 kg

Condition: used, Year of construction: 2025, functionality: fully functional, The DC3000 from CORMAK is an advanced sawdust cyclone designed for intensive dust extraction processes in the woodworking, furniture and metalworking industries. Thanks to its state-of-the-art cyclone separator, powerful sawdust fan and double filtration system, the unit ensures effective air cleaning of fine and coarse dust fractions. The sawdust extractor DC3000 is distinguished by its automatic filter shaking and remote control - which significantly increases the comfort and efficiency of daily work. Technical parameters Extraction capacity 2000 - 7000 m³/h Fan rotation speed 2800 rpm Suction nozzle diameter 3 x 100 mm / 1 x 200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions 1300 x 1000 x 2200 mm Weight 219 kg Standard equipment Automatic filter shaker Remote control Pressure gauge Double filtration system (main and pre-filter) Metal container under the separator Transport wheels WARNING: THE MACHINE IS RETURNED, FILTER REPLACED, OLD BAG INSTALLED, NO ORIGINAL PACKAGING Lasdew Hxquspfx Aabsh

Condition: ready for operation (used), functionality: fully functional, filter area: 2.2 m², volume flow: 3,000 m³/h, Sawdust extractor 1 bag Alfa Rimini Specification: • condition - used • manufacturer - Alfa Rimini • model - Alfa 1 Lodpfx Aajvuhqnoboah • turbine engine power - 1.5 kW (single-phase, 220V) • turbine inlet - fi 160 mm • collection bag diameter - 1 x fi 500 mm • 1 filter bag with dimensions - 500 x 1250 mm (2.2 m2) • efficiency - 3,000 m3/h • year of manufacture - 2000 • dimensions 110 x 720 x 260 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Manufacturer: Piovan Type: — Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Manufacturer: Siemens Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm Ljdpfx Asxh Ammoaboah

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz Ljdpfx Aaecdy I Toboah max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Holzkraft Extractor RLA 210 For wood dust and shavings, designed for commercial use Item number: 5132100 Brand: Holzkraft Dimensions and weights Shavings collection volume: 2 x 165 l Nominal diameter of the external suction nozzle inlet: 200 mm Length: approx. 1755 mm Width/depth: approx. 830 mm Height: approx. 1800 mm Weight: approx. 259 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise emission Sound pressure level: max. 72 dB(A) Voltage flow: Nominal flow rate: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with low noise Space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Lajdpohk Dfrsfx Aaboh Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor is delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece, washable and therefore with a long service life Filter is tested and approved as standard in an antistatic version according to category M-BIA Filter resistance monitoring via differential pressure cell, adjustable with a warning light on the unit Control box The fan is installed downstream of the filter. Equipment details With a new locking device for secure container positioning. Location: From stock, 54634 Bitburg - Available at short notice.

Condition: good (used), Year of construction: 2007, Used Al-ko clean air dust extractor, Intake nozzle: 160 mm Motor rated power: 2.2 kW / 3-phase Voltage: 400 V / 50 Hz Nominal air volume flow: 1850 m³/h Negative pressure: 2120 Pa Filter area: 9 m² Filter material: Category "C" - BIA certificate - electrically conductive - washable - H3 < 0.1 mg/m³ Filter cleaning: compressed air Max. sound pressure level: 69.4 dB Chip collection volume: 280 litres Dimensions (L/W/H) in mm: 1600 x 830 x 1850 Ledpfsw Aptlsx Aaboah Weight: 288 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition piece - new Sold at a special price Technical data 300-P intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Lajdpscdrzdofx Aaboh Location: ex stock Bitburg Subject to prior sale

Condition: excellent (used), Year of construction: 2013, Technical data: ALKO clean air mobile extraction unit, Ledpfew Aprzex Aaboah Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Suction nozzle Ø=120 mm, Soundproofed, mobile separator container 135 l, manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust container volume: 135 liters, Weight: 117 kg, Nominal air volume (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko clean air deduster Laedpfx Ajcdr Ensabeh Exhibit Sold at a special price Technical data Power Unit 250 P Intake manifold: 250 mm Nominal motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22,4 m² Spa collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Lajdpfx Aaecdy I Roboh Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Lajdpfx Aocnw T Ioabeh Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) Lasdpfjhkzt Nex Aabeh - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: excellent (used), Year of construction: 2016, Technical data POWER UNIT 200 P used - Excellent condition - • Inlet diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. air flow: 3010 m³/h • Rated air flow: 2262 m³/h • Vacuum: 2174 Pa • Filter surface area: 13.7 m² Ljdpsw Tqndofx Aabeah • Filter cleaning: compressed air cleaning • 2 discharge containers (roll containers): each 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 mm • Weight: 320 kg • Version: left Location: Ex-stock Bitburg - Immediately available -

Condition: good (used), Year of construction: 2000, Gebr. Esta Dustomat 62 Lodpfevk Drtox Aabeah Suction nozzle Ø: 160 mm Main motor: 3 kW Item description: mobile, CE mark, 3 KW, Ø=160 mm, Filter cleaning mobile separation container, Nominal volume flow 1,850 m³ / h Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Lodpfx Aasv Sk Tmobjah Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning