Used Dvpn 75 for sale (22,188)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Iedsvf E Avepfx Aabjtn Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, mileage: 1,10,646 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,690 mm, overall weight: 7,490 kg, empty load weight: 4,990 kg, maximum load weight: 2,500 kg, first registration: 07/2013, loading space length: 5,498 mm, loading space width: 2,447 mm, loading space height: 2,125 mm, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 2, Year of construction: 2013, total length: 7,300 mm, construction height: 3,300 mm, fuel: diesel, Equipment: ABS, onboard computer, tail-lift, Transmission damage! The used Iveco EuroCargo ML 75 E 16 P is presented as a reliable transporter with a box body internal length of 5.5 meters. The vehicle is equipped with a 3,920 cc diesel engine delivering 118 kW (160 hp) and complies with the Euro 5 emissions standard. The automatic transmission ensures comfortable driving. With a mileage of 110,646 km and first registration in July 2013, it is in good condition. The vehicle is functionally upgraded with useful features such as a tail lift and air suspension. The transporter measures 7.3 meters in length, 2.3 meters in width, and 3.3 meters in height. Its wheelbase is 3,690 mm, and the permissible gross weight is 7,490 kg, making it ideal for commercial applications. Itsdexmt Ixopfx Aaben The transporter was previously owned by a single owner and is currently finished in yellow. The vehicle holds an emissions sticker of class 4 (green), allowing access to low-emission zones. Sale only to businesses (agricultural, freelancers, small or large commercial enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 4,62,060 km, power: 152 kW (206.66 HP), first registration: 06/2015, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 215/75R17,5, fuel: diesel, wheelbase: 4,170 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, soot filter, spoiler, traction control, = Additional Options and Accessories = - Leaf Spring Suspension - Power Brakes - Roof Spoiler - EBS - Electric Windows - Remote Central Locking - Particulate Filter - Radio/CD Player - Radio/Cassette Player - Spare Tire - Central Locking = Additional Information = Technical Information Number of Cylinders: 4 Engine Displacement: 4,485 cc Transmission Transmission: 6-Speed, Manual Axle Configuration Tire Size: 215/75R17.5 Brakes: Disc Brakes Suspension: Leaf Spring Suspension Front Axle: Max. Axle Load: 3200 kg; Steered Rear Axle: Twin Tires; Max. axle load: 5200 kg Isdpsxnm H Defx Aabotn Dimensions Dimensions (L x W): 800 x 255 cm Weights Unladen weight: 5,120 kg Payload: 2,370 kg GVW: 7,490 kg Identification License plate: 06-BKP-3

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, DGUV certified until: 09/2026, Flake Ice Maker KF 75 L suitable for built-in installation - Stainless steel construction - Daily output up to 80 kg/24 hours - Air-cooled - Refrigerant R 404 A Only with us: DGUV V3 tested Connection: 230V/520Watt Dimensions: 485 x 586 x 720 mm (W x D x H) New machine, SAB tested With warranty & service Options: Water filter Maintenance contract Itodpfx Aouiruzjabjn Service package Leasing & rental services We have a wide selection of bakery machines in stock!

Condition: used, mileage: 2,11,100 km, power: 137 kW (186.27 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 07/2015, loading space length: 5,100 mm, loading space width: 2,470 mm, loading space height: 2,160 mm, loading space volume: 27 m³, emission class: euro6, Equipment: ABS, air conditioning, central locking, tail-lift, Dhollandia tail lift 1,000 kg, 1,800 mm high, 1,680 mm wide. * Thermo King T-800R cooling unit, diesel + 380 V, cold recorder. ----Spier freezer box with 3 rear doors, additional side loading area door (1,900 mm high, 900 mm wide), Cool Slide cold retention system (3-part) can be moved transversely and lengthways. ----* 6-speed gearbox * Rear axle with air suspension * Disc brake * Driver's cab S (short) * Transparent external sun visor Itodpfjxmmxdjx Aabsn * Heated rear view mirror * Electric window lifter for driver and passenger doors * Electric adjustable mirrors, driver and passenger side * Immobilizer (transponder) * Air conditioning * Rear view camera with monitor in the driver's cab * Euro 6 engine version * Plastic floor coating in cargo area * Driver's seat with air suspension * Two-seater passenger seat * Rear doors * Central locking * Without spare wheel ----Sale to businesses only! No guarantee for the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to make you a leasing or financing offer.

Condition: used, first registration: 01/2022, Ident: MAN00000C01090306 Year of manufacture: 2022 332 operating hours Fuel type: Diesel System output: 55.4 kW Automatic transmission Enclosed cab Air conditioning Rearview camera Load moment indicator 2022 US EPA label Adjustable forks Manual coupling Auxiliary hydraulics Tires 400/80R24 Side shift Two vehicle keys available. Model year 2023. The vehicle is sold deregistered. As there is no insurance coverage, the vehicle must be transported using a towing axle or with transit plates. Sale exclusively to businesses, with any warranty excluded. Errors and prior sale excepted. Itjdpsw H N Ttsfx Aaben

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head, double drilling head -Manufacturer: Madison. Boring head double boring head with indexable inserts Itsdpfx Aasxdw Idobsn -Type: 3023-200-07400 -Employments: 3025-438 -Spindle size: Ø 75-100 mm -Dimensions: Ø90 x 370 mm -Weight: 6.0 kg

Condition: excellent (used), round clamping plate Clamping disk diameter 1380 mm Height 75 mm Iodpfxefggc To Aabetn Weight 900 kg

Condition: used, Year of construction: 1997, For sale is the enamel stove shown in the pictures. If you have any questions, we are happy to assist you. Iedpsxlq Elefx Aabetn

Year of construction: 2024, condition: new, - 260 mm cutting height - 750 mm cutting width - 5-30 m/min stepless feed - 2x75 sawing motors - 3 KW feed gearbox - 70 mm soindle diameter - 400 mm sawblade diameter Itedpfobu Rqpox Aabjn - 5000 Kg weight

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Itodpfxjnccx Ho Aabsn

Condition: used, mileage: 3,65,000 km, power: 105 kW (142.76 HP), first registration: 09/1999, fuel type: diesel, axle configuration: 4x2, tire size: 215/75 r 17.5, gearing type: mechanical, emission class: euro2, suspension: steel-air, Year of construction: 1999, machine/vehicle number: 1, Equipment: ABS, air conditioning, IVECO EUROCARGO 75 E 150 P refrigerator, 2 axles 4X2, year 1999, Thermo King VM 305 MAX Diesel+Electric refrigerator temperature down to -20°C degrees, van measurements: length 4,150 mm X height 2,050 mm X width 2,150 mm, total truck length 4,150 mm X height 2,050 mm X width 2.150 kg, total truck length 5,900 mm, wheelbase 3,105 mm, total weight 7,490 kg, load capacity 3,425 kg, manual transmission 6+R gears, climate, ABS, Euro 2, 1st axle mechanical suspension balestrato, 2nd axle air suspension, tires 70%, tire size 215/75 R 17.5, windows + electric mirrors, radio, good condition. INFO ENG: Trcuk IVECO EUROCARGO 75 E 150 P refrigerator, 2 axler 4X2, first registration 1999, refrigerator Thermo King VM 305 max Diesel+Electric, refrigerator is 4,150 mm long X 2,050 mm high X 2,150 mm Large, truck is 4.150 mm total long, total weight 7,490 Kg, payload 3,425 Kg, manual gearbox 6+R speed, air-conditioning, ABS, Euro 2, 1°Axler steel suspensions, 2°axler air-suspensions, tyres 70%, tyres 215/75 R 17.5, good condition Ijdpfx Aaopmaifsbotn

Condition: excellent (used), Year of construction: 2015, operating hours: 64 h, machine/vehicle number: LS001216, Size 53 x 75 cm, Prinect Press Center, Axis control, Instantgate software, Intellistart, Colorfast, Preset Plus feeder, ultrasonic double sheet control, Autoplate, Alcolor Vario dampening, Heidelberg combistar air-cooled cooling and recirculation unit, Heidelberg Hydrostar air-cooled, Powderstar AP 262 powder spray, Staticstar compact anti-static device, Preset Plus delivery, blanket wash, roller wash, impression cylinder wash. 15,000 sheets/hour. Itodpfxexd Ahie Aabsn

Condition: excellent (used), mileage: 2,63,024 km, power: 184 kW (250.17 HP), first registration: 01/2010, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: other, Year of construction: 2010, = Additional Options and Equipment = - PTO (Power Take-Off) = More Information = Technical Information Number of cylinders: 6 Engine displacement: 9,186 cc Drivetrain AdBlue system: Yes Axle configuration Front axle: Steered; Suspension: Leaf suspension Rear axle 1: Twin wheels; Suspension: Air suspension Rear axle 2: Lift axle; Steered; Suspension: Hydraulic suspension Dimensions Dimensions (L x W x H): 1,025 x 265 x 395 cm Weights Unladen weight: 15,520 kg Payload: 10,480 kg Isdpfxoxmtcps Aabetn Gross vehicle weight: 26,000 kg Functional Body manufacturer: EUROVOIRIE Pump: Yes Condition Technical condition: Very good Visual condition: Very good Additional Information Contact Thierry Leemans for further information.

Condition: used, Year of construction: 1979, - Automatic cross feed defective - Includes tools & accessories - Includes operating manual & documentation - Year of manufacture: 1979 Working area: - Table clamping surface without extension: 700 x 500 mm - Table clamping surface with extension: 1320 x 500 mm - Max. grinding length: 700 mm - Max. grinding width: 550 mm - Max. distance table/spindle center: 700 mm Table load capacity: - Max. load without magnetic chuck: 780 kg - Standard size of magnetic chuck: 700 x 500 mm - Weight of magnetic chuck: approx. 245 kg Table longitudinal travel: - Longitudinal travel (hydraulic): 820 mm - Longitudinal travel (manual): 900 mm - Table traverse speed (stepless): 2 - 30 m/min Support cross travel: - Cross travel with automatic cross feed: 475 mm - Automatic cross feed: 2 - 50 mm/table stroke - Max. cross travel (manual): 500 mm - Adjustment with handwheel: 0.1 mm/division - Fine adjustment: 0.001 mm/division Grinding head vertical adjustment: - Automatic infeed (Finimatic): 0.001 - 0.04 mm/stroke - Manual tip infeed: 0.001 - 0.002 mm - Adjustment with handwheel: 1 mm/revolution - Fine adjustment at micrometer head: 0.1 mm/revolution - Rapid traverse: approx. 150 mm/min Grinding spindle drive: - Speed (at 50 Hz): 1400 / 2800 rpm - Power: 5 / 6 kW Grinding wheel: - Outer diameter: 300 mm - Max. outer diameter: 400 mm - Min. outer diameter: 165 mm - Width (standard): 50 mm - Max. width: 80 mm - Bore diameter (standard): 76 mm - Bore diameter for Ø 400 mm: 127 mm Space requirement, weight & power consumption: - Base dimensions WxD: 1200 x 1285 mm Iodjxbgnuopfx Aabjtn - Total space requirement WxD: 3430 x 3695 mm - Total weight (without operating materials): approx. 3900 kg - Power consumption: approx. 10 kW

Condition: defective spare-parts repository (used), Year of construction: 2015, operating hours: 2,500 h, power: 257 kW (349.42 HP), Lindner Urraco 75 D approx. 2,500 hours fire damage incl. overband magnet Itodpfx Aexca A Ioabjn incl. 1 set used shafts CE certified machine

Condition: reconditioned (used), warranty duration: 6 months, Kemper ST 75 A Dough Mixer - used Ijdpfx Ajxfwvdeabotn - refurbished - capacity 120 kg dough - 2 removable bowls - manual control - 2 speeds - power approx. 8 kW - manual and automatic operation - refurbished - 6-month warranty - price on request

Condition: good (used), Year of construction: 2014, Maho DMU 75 Monoblock, year of manufacture 2014, Siemens 840 control, travels X/Y/Z 750/650/560 mm, 2-axis NC swivel rotary table, NC swivel rotary table 800 x 600 mm, max. table load 600 kg, spindle speed up to 18,000 rpm, HSK 63, 60-position tool changer, chip conveyor, cooling. Itedpsxlp Dmjfx Aabsn

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo type/model: MS 75 x 2000 S Condition: new belt dimensions: 75 x 2000 mm belt speed: 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm suction connection: 100 mm motor output power S1 100%: 3,0 kW motor input power S6 40%: 4,0 kW Voltage: 400 V length: 1080 mm width: 440 mm height: 1000 mm Itedpfxsfnr Aie Aabsn Weight approx.: 66 kg Features: Good grinding performance due to high belt speed Quick adjustment for horizontal and inclined position Continuous plane grinding surface for optimum grinding of long workpieces Constant belt tension due to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for cylindrical sanding Including quick tensioning system for fast belt change Easy adjustment of parallel belt run by means of adjusting screw Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Base frame

Condition: good (used), functionality: fully functional, DGUV certified until: 11/2026, Kemper Model: F 75 SL for up to 120 kg dough Lifting spiral mixer with 2 speeds Flour dust cover Stainless steel bowl and kneading arm Mobile machine Connection: 400V, 16A CEE plug Itsdpfevx Iwpsx Aabon Dimensions: 960 x 950 x 900/1840 mm (W x D x H) Used machine, cleaned Many more lifting mixers in stock!

Condition: excellent (used), Year of construction: 2018, Brand: DMG MORI Model: DMF DMU 75 Monoblock Year: 2018 CNC: Heidenhain iTNC640 Equipped with: Integrated rotary table, diameter 600 mm / 600 kg capacity Spindle 35 kW – 20,000 rpm Tool changer with 60 positions Probe TS 649 3D quickset Through-spindle coolant 40 bar Tool probe Coolant spray gun Iodpfsxmi Alsx Aabotn Chip conveyor Specifications: Table surface: 800 x 650 mm (dia 600 tilting) X-axis travel: 750 mm Y-axis travel: 650 mm Z-axis travel: 560 mm B-axis: -/+120° C-axis: 360.000° Spindle speed: 2 - 20,000 rpm Spindle power: 35 kW Spindle taper: SK 40 Rapid traverse XYZ: 40 m/min Machine dimensions (approx.): 3200 x 2600 x H 2900 mm Weight (approx.): 11,600 kg

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper Isdswivdkepfx Aabjtn mold is not included EXCELLENT CONDITION

Condition: excellent (used), mileage: 9,66,913 km, power: 199 kW (270.56 HP), first registration: 11/1994, fuel type: diesel, color: other, axle configuration: 4x2, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 1994, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Front suspension: Leaf - Hydraulics Isdpfx Aajxl A Rgobjtn - Open roof - PTO - Rear suspension: Leaf - Sper = Remarks = Structure Tank capacity: 10500 liters = More information = Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels; Differential lock Dimensions (LxBxH): 700 x 250 x 350 cm Technical condition: very good Visual appearance: very good Serial number: XLRAE75RC0E410741

Condition: good (used), Year of construction: 2016, Maho DMU 75 Monoblock, year of manufacture 2016, Siemens 840 control, travel X/Y/Z 750/650/560 mm, 2-axis NC swivel rotary table, NC swivel rotary table 800 x 600 mm, max. table load 600 kg, spindle speed up to 20,000 rpm, HSK 63, 60-position tool changer, chip conveyor, cooling. Isdpjxlpvvofx Aabstn

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo Type/Model: MS 75 x 2000 S-2 Condition: New belt dimensions: 75 x 2000 mm belt speed: 14,5 / 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm suction connection Ø: 100 mm motor output power S1 100%: 2,4 / 3,0 kW motor input power S6 40%: 3,0 / 4,0 kW Voltage: 400 V Dimensions (L x W x H): 1080 x 440 x 1000 mm Weight approx.: 67 kg Ijdpfx Aaeb Hhkgobetn Original packed new product.