Used Ga 50 Vsd for sale (94,726)

Condition: like new (used), GA (W) VSDs (Variable Speed Drive) are single-stage, oil-injected, electric motor-driven, stationary screw compressors. Hfedpfxowxwxzs Aaben The cooling system is equipped with an air cooler and an oil cooler. GA VSD are air-cooled compressors; cooling air is provided by a fan. Main features: - Maximum air inlet temperature: 40°C. - Maximum cooling water outlet temperature: 50°C - Temperature of the air leaving the outlet valve approx.: 30°C - Approximate oil capacity: 17.9 L

Condition: like new (used), Year of construction: 2016, operating hours: 3,890 h, functionality: fully functional, INVERTER COMPRESSOR WITH INTEGRATED DRYER, LIKE NEW, ONLY 3890 HOURS. NEW LIST PRICE: EUR 56,199. MAIN FEATURES: MAX PRESSURE 13 BAR, OUTPUT 5100 L/MIN, POWER 26KW-35HP. Hfjdpfjxnx Dhjx Aabon

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Hfjdpfjxmkc Tjx Aabjn

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Hfjdpfjv Rmmmjx Aabon

Condition: good (used), Year of construction: 2009, operating hours: 63,000 h, functionality: fully functional, machine/vehicle number: API 656 564, overall weight: 1,213 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,968 mm, power: 90 kW (122.37 HP), fuel type: electric, pressure (min.): 3 bar, pressure (max.): 13 bar, noise level: 74 dB, type of cooling: air, Equipment: documentation/manual, type plate available, The system was used to operate dry ice blasting equipment. A 5,000-liter tank was connected upstream and is included in the offer. After our relocation, the system was no longer put into operation. The system additionally features a water heat exchanger, allowing the waste heat to be used for heating. Hfjdpfx Aexd Umqsabsn

Condition: good (used), Year of construction: 2010, operating hours: 1,00,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Hfedpou Rptyjfx Aabjn Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours Hfodpst Hdh Nofx Aaben The compressor is fully functional.

Condition: like new (used), Year of construction: 2014, operating hours: 5,520 h, functionality: fully functional, INVERTER COMPRESSOR WITH INTEGRATED DRYER, LIKE NEW, FEW HOURS. NEW LIST PRICE: EUR 31,200. MAIN FEATURES: MAX PRESSURE: 13 BAR Hfsdpfexnxz Tox Aaben POWER: 15 KW – 20 HP CAPACITY: 2,940 LITERS/MINUTE

Condition: ready for operation (used), Year of construction: 2012, operating hours: 30,000 h, functionality: fully functional, power: 37 kW (50.31 HP), fuel type: electric, operating pressure: 13 bar, pressure (max.): 12.5 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco GA 37 VSD FF - used premium screw compressor Speed-controlled screw compressor, air-cooled, oil-injected, full feature incl. integrated refrigeration dryer incl. heat recovery system Used device from year of manufacture 2012, functional, approx. 30,000 operating hours, without warranty Technical data: Motor power: 37 kW Refrigeration dryer: integrated Compressed air connection: G 1/2" Dimensions in mm (LxWxH): approx. 1766x970x1800 Weight: approx. 1,130 kg Max. pressure: 12.5 bar Volume flow: at 4 bar up to 7.43 m3/min, Hedpfxjvcmwce Aabofn at 7 bar up to 7.32 m3/min, at 9.5 bar up to 6.40 m3/min at 12.5 bar up to 5.24 m3/min

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. Hfsdpfxowlp Hdo Aabon The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: excellent (used), Year of construction: 2009, overall weight: 444 kg, volume flow: 1.7 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 11 VSD screw compressor Variable speed (inverter) On a 500 l pressure tank Hsdpfxsv Sm Ume Aabofn 11 kw engine Efficiency 1.70 m3/min Pressure 10 bar Year of production 2009 Compressor after service, filter and oil replacement.

Condition: excellent (used), Year of construction: 2017, operating hours: 29,000 h, inverter compressor with integrated dryer technical specifications maximum pressure: 13 bar power: 55 kW / 75 hp Hodpfx Ajxl Tpyjabefn capacity: 9960 litres/min current list price for new compressor: €94,655

Condition: new, Year of construction: 2025, Atlas Copco compressor (we are official dealers) new year 2025 with warranty. possibility of combining dryer (available). list price euro 49551 mod ga 37 vod with inverter main features: Hfjdpfxjwaz D Rj Aaben bar max 10 power 3kw/45hp flow rate liters/min 6900

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, ATLAS COPCO GA50VSD screw compressor, machine after service with frequency inverter Technical specifications: Output: 9.18 m3/min; Motor power: 50 kW; Maximum pressure: 13 bar; Year: 2001 Operating hours: 18,531h Hodpoxlpzxefx Aabjfn Price: 19,500 net / 23,985 gross Compressor is fully functional, ready for operation, warranty included Service provided. Video link below.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,656 h, functionality: fully functional, Second hand Atlas Copco GA250VSD, year of manufacture 2018, approximately 34,656 operating hours. 10 bar with 44.90 m3/min. 250 kW. Hfodpfx Asw Ewd Rsabjn

Condition: excellent (used), Year of construction: 2002, Screw compressor ATLAS COPCO GA50VSDFF machine after service, with inverter and air dryer Technical data: capacity: 9.27 m3/min; 50 KW motor,; 12.8 bar max pressure; year;2002 Hfodjrxtd Njpfx Aabon mileage;15194h 24500 net 30135 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Year of construction: 2005, Screw compressor ATLAS COPCO GA50VSDFF machine after service, with inverter and air dryer Technical data: Hfedsri Rnfjpfx Aabjn capacity: 9.27 m3/min; 50 KW motor,; 12.8 bar max pressure; year;2005 mileage;15194h 27500 net 33825 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Year of construction: 2002, Screw compressor ATLAS COPCO GA50VSD machine after service with inverter Technical data: capacity: 9.18 m3/min; 50 KW motor,; Hodpfsrxtddex Aabefn 13 bar max pressure; year;2002 mileage;14276h 23500 net 28905 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Collet chuck from the renowned brand GARANT (Hoffmann Group) – guaranteed top quality and reliability in CNC machining. Model SK40-12-50, catalogue number 300100 12. • SK40 taper – industry standard for machining centres • Clamping diameter Ø12 mm • Chuck length 50 mm • Max. RPM 25,000 • High precision and dynamic balancing • Supplied with a mounted end mill. Very good condition, ready for immediate use. Professional tool for CNC milling machines, ideal for workshops that value quality and reliability. -- PRICE LISTED IS FOR 1 PIECE -- Hfodpfxsw Sy Ane Aabsn

Condition: like new (used), 50 rm pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Hfjdpofkgq Sefx Aaben Height 7 m Depth 110 cm, blue Beam length 2.7 m orange girder with load /shelf 3050 kg Negotiable price: € 10.150,-- net ex stock Offer consists of: + 19 pcs. frames pre-assembled, depth 110 cm, height 7 m +144 pcs. beams, length 2,7 m, 3050 kg payload/slot +288 pcs. suspension locks + 38 pcs. concrete anchors Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), For sale: complete GARANT SK40-10-50 tool holders equipped with VHM solid carbide end mills. Products from the renowned Hoffmann Group Germany, ready for immediate use on CNC machining centers. • Clamping type: SK40 (DIN 69871) • Bore size: Ø10 mm • Length: 50 mm • Catalogue no: 300100.10 • Balancing: G2.5 up to 25,000 rpm • Set includes: VHM solid carbide end mills Ø10 (various types – visible in the photos) • Ideal for machining steel, stainless steel, cast iron, and metal alloys • Very good condition – tested and ready for use GARANT tool holders ensure top-quality clamping and machining precision at high spindle speeds. -- PRICE IS PER PIECE -- Hjdpow Sy Ahsfx Aabsfn

Condition: new, 50 rm pallet rack Jungheinrich type MPB new goods New goods, see pictures height 9 m depth 110 cm, blue beam length 2,7 m yellow girder with load / compartment 3000 kg Negotiable price: € 12.750,-- net ex stock Offer consists of: + 19 pcs. frames pre-assembled, depth 110 cm, height 9 m + 144 pcs. beams, length 2,7 m, 3000 kg payload/slot + 288 pcs. suspension locks + 78 pcs. concrete anchors Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue, infills galvanized. 3.5 m to 9 m heights in stock. Bay load 12 tons. Beam yellow. Product is in stock. Transport and assembly possible on request. Inspection possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices Hfsdpfxelp Ntgs Aabon and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), For sale: Professional GARANT SK40-6-50 tool holder for precise clamping of Ø6 mm tools. Product of the renowned Hoffmann Group / Garant – Germany, used in CNC machining centers. • Clamping type: SK40 (DIN 69871) • Size: Ø6 mm • Length: 50 mm • Catalogue number: 300210.6 • Balancing: G2.5 up to 25,000 rpm • High accuracy, stable clamping • Ideal for VHM end mills and drills as well as precision tools • Very good condition – tested, ready for use. GARANT tool holders represent the top tier in clamping technology – guarantee of quality and durability. Hedjw Syzwopfx Aabjfn -- PRICE PER PIECE --

Condition: new, Neugart WPLS142-005-SSSB3AG-E24/50/130/165/B5/M10 bevel gear Item No. 100336738 SN:2231204-1, unused in opened original packaging, 100% functional, scope of delivery as per photos Hsdpfx Aaei Eb Ufsbsfn

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder. Hfjdpfsibh S Hox Aaben