Used Dw 742 for sale (850)

Condition: used, High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm Kdjdpfx Aofxrghjdwog -Weight: 3.1kg / piece

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.37/0.48 kW Kodpfx Adeckb E Tewedg -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 39 kg

Condition: good (used), Pressure-tight clamping connection, formwork accessories, KRASO clamping connection -monolithic connection of the vulcanized KRASO locking disc -Easy installation -No assembly on site -simple closure of the clamping point -no complicated gluing of the sealing plugs Ksdpfob Eu S Iex Adwjdg -no labor-intensive rework -absolutely watertight clamping point -Tested to be watertight inside and out -from company liquidation -Total length: 300 mm -1 wire mesh box approx. 350 pieces -Weight: including box 142 kg

Condition: used, Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller Kodpfx Adsd Nhihswedg -Oscillator Model: ED-WS -Year of construction: 2017 -Voltage: 220 V -Dimensions: 210/210/H130 mm -Weight: 2.6 kg

Condition: good (used), Electric motor, three-phase motor, brake motor Kdsdpfx Adodlw D Dowjg -Power: 2.2 kW -Speed: 1410 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 44 -Brake: 220 V -Number: 1x available -Price: per piece -Dimensions: 430/260/H200 mm -Weight: 35 kg

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm Kdsdpfxecwl A Io Adwjg -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Stöber HEW, gear motor with brake -Gearbox: Stöber Type DWO-2000-018-4 -Speed: 69 rpm -Hollow shaft: Ø 16 x 85 mm -Engine: HEW RF 63L/4-BO,4 -Power: 0.18 kW -Protection class: IP54 Kodew Da Rqopfx Adwodg -Brake: 4 Nm -Dimensions: 365/140/H190 mm -Weight: 10.8 kg

Condition: used, Toggle plug, anchor hook -Manufacturer: Würth, Toggle dowels 25 pieces/box Kodpfxsipapxj Adwedg -Type: W-KDW M10x180 -Number: 27 boxes available -Price: per box -Dimensions cardboard: 270/210/H100 mm -Weight: 3kg/carton

Condition: good (used), PLC control, digital output, digital input -Manufacturer: Siemens, SIMATIC S7-400, digital output SM 422 Kdjdpfx Aewc Npgjdweg -Type: 6ES7 422-1BL00-0AA0 -Quantity: 1x module available -Dimensions: 215/25/H290 mm -Weight: 0.8 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 110/165 V 200/300 Hz Kedpfxsb R Aczs Adwedg -Power: 8.3/12.5 KVA -Dimensions: 750/350/H320 mm -Weight: 150 kg

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Tennant, Permanent Magnet Motor Type 377425 -Power: 0.74 kW -Speed: 2200 rpm -Voltage: 36 V -Gearbox: Regal-Beloit 7722703-SJ Kdsdpfsfv Ap Nex Adweg -Translation: 7.5 : 1 -Shaft: Ø 19 x 35 mm -Dimensions: 395/210/H195 mm -Weight: 21 kg

Condition: good (used), Position computer, computer, control unit, robot controller, controller, CNC controller, operator panel, computer monitor, screen, TFT industrial monitor, front panel, touch screen, control unit, display, operator panel, touch screen, touch panel, multi-panel, touch multi-panel Kdsdpfjxud Dmex Adwsg -Manufacturer: Schneider Electric, Pro-face Monitor -Type: GP-4301TW -Model: PFXGP4301TADW -Number: 3 monitors available -Price: per piece -Dimensions: 170/140/H60 mm -Weight: 0.7 kg/pc.

Condition: good (used), Geared motor, electric motor, electric geared motor -Electric geared motor: for crane cable reel -Features: External fan, no brake -Speed: 3.7 rpm -Power: 300 Nm -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 Kedpfxscxq Ale Adwsdg -Quantity: 1x motor available -Price: per piece -Dimensions: 760/260/H300 mm -Weight: 51 kg

Condition: good (used), PLC control, digital output, digital input -Manufacturer: Siemens, SIMATIC S7-400, digital input SM 421 -Type: 6ES7 421-1BL01-0AA0 -Number: 1x module available Kdjdpfxowc Nn Ao Adweg -Dimensions: 215/25/H290 mm -Weight: 0.8 kg

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kdodpfx Adex Rqpkewog

Condition: used, maximum load weight: 13,820 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2020, next inspection (TÜV): 10/2026, loading space length: 5,000 mm, loading space width: 2,380 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 2,450 mm, Equipment: ABS, Tandem three-way tipper trailer ABS Air suspension Support leg at front Platform at front wall Aluminum drop sides Foldable underrun protection Wheelbase 1,000 mm Gross weight 18,000 kg Payload 13,820 kg Tyres 385/65R22.5, 40-80% tread Kedpfxjyawayo Adwsdg Vehicle No. 2428 for inquiries. Trailer in very good overall condition, first owner. No liability for typing or data transmission errors. Subject to change and prior sale. Daily cash purchase of commercial vehicles, construction machinery, trailers, and semi-trailers built from 2000-2025.

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). Kedsgvkktopfx Adwsdg thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm Ksdpfxjk Egrts Adwjdg We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. Kjdpsgvkk Nofx Adwsdg - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, Technical specifications: Material Thickness: 2mm Internal dimensions LxWxH: 120 x 61 x 58 cm Useful volume: 420 liters External dimensions LxWxH: 122 x 61.5 x 70 cm Height (unfolded): 123 cm Drill Pattern Spacing - Large Hole (25mm): 40" x 18". Drill Pattern Spacing - Small Hole (12mm): 8.4 x 8.4 cm Stacking fork mounts: W12 x H8.5 cm Weight: 60kg Kdjdpfx Aot U Sckjdwog

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW Kdsdpfx Aoh Evt Uodwsg The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: used, mileage: 3,29,568 km, power: 162 kW (220.26 HP), first registration: 01/2010, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2026, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, tail-lift, ? MAN TGL 8.220 ? 1st owner ? German vehicle ? Air conditioning ? Engine brake Kdjdjya S S Dspfx Adwog ? Auxiliary heater ? Reversing camera ? Automatic transmission ? Electric windows ? Cruise control ? Roof spoiler ? Payload approx. 2000 kg ? Tyres 70%? Spare wheel ? Rear axle air suspension ? Sliding tarpaulin ? Drop sides 50 cm ? Palfinger tail lift 1000 kg ? Internal dimensions: L: 6.20 m, W: 2.49 m, H: 2.77 m ? Trailer coupling and ball hitch ? Euro 5 ? TÜV valid until 02/2026

Condition: used, machine/vehicle number: 28810, mileage: 1,19,501 km, power: 355 kW (482.67 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 8,323 kg, maximum load weight: 9,677 kg, overall weight: 18,000 kg, tire size: 315/70 r 22.5, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2022, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, onboard computer, parking heater, soot filter, spoiler, traction control, our vehicle number # 28810 DAF XF 480 FT NGD Euro VI Checkbook maintained, maintenance up to date new!!! XF Sleeper High Cab, air suspension Additional brake: Intarder Rear axle with air suspension Wheelbase 3,800 mm 315/70 R 22.5 tires Diesel tank: 765 + 620 ltr. Differential lock Automatic transmission: TraXon Automatic air conditioning Auxiliary heating Cruise control Traction control VSC electronic stability control Full spoiler Climate suspension seat/heated Refrigerator 2 recliners 3-way sunblind Radio/DAB DAF Premium Audio DAF Connect Apple CarPlay Android Audio ACC adaptive cruise control FCW collision warning system AEBS Emergency Brake Assist LDWS Lane Departure Warning System Turn Assist PCC Predictive Cruise Control ZV w. remote control Front fog lights Kdodsp Nkkmspfx Adwog Working headlights LED headlights Bend lighting LED sky lights el. FH 2-fold el. Exterior mirrors/heated el. Roof hatch Multifunction leather steering wheel On-board computer reversing alarm Axle load indicator DPF diesel particulate filter Leasing or hire purchase/financing possible on request !!!

Condition: excellent (used), Year of construction: 2011, functionality: unexamined, overall weight: 2,500 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 350 mm, 2 x white sandwich panel 350 x 2000 x 4500 mm with hydraulically extendable wheels, design type 5 Kdjdpfjwxwcmex Adwsg

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 6 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. Kjdemcclijpfx Adwjdg • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Length: 6 m Linear Unit: ProfiStop Omicron Material Length: 5230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.