Used Edge Grinding Machine for sale (66,722)

Condition: refurbished (used), Year of construction: 1975, DISKUS GRINDING MACHINE (Double-surface grinding machine) Hjdpfezzpaaox Ab Iont DISKUS WERKE AG (FRANKFURT / MAIN), Type DDS 600 P, Year of manufacture 1975, COMPLETELY OVERHAULED in 2024.

Condition: good (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, coolant pump power: 150 W, grinding spindle motor power: 1,500 W, overall weight: 510 kg, grinding wheel diameter: 230 mm, For sale: Wadkin copy sanding machine in tidy condition with a wide working capacity. Hodpfx Ajyk S U Tob Ient

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm * Maximum edge height: 55 mm Hnjdozi Am Nspfx Ab Iet * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0204231, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, height adjustment type: electric, total length: 4,800 mm, total width: 1,500 mm, Kuhlmeyer ZBS 2 Grinding Machine / Belt Grinder – Year of Manufacture 2002 – Industrial Version For sale is a robust and powerful grinding machine, type Kuhlmeyer ZBS 2, built in 2002. This machine is manufactured in Germany and is specifically designed for industrial use in metalworking. Technical Data: Manufacturer: Kuhlmeyer Maschinenbau GmbH Type: ZBS 2 Year of manufacture: 2002 Machine No.: 0204231 Connection voltage: 400 V Control voltage: 230 V Connected load: 6.5 kW Rated current: 16 A Frequency: 50 Hz Compressed air: 6 bar Weight: approx. 2,500 kg Description: The Kuhlmeyer ZBS 2 is a heavy-duty industrial belt grinder, ideal for grinding, deburring, and finishing metal components. Thanks to its sturdy construction and high own weight, the machine runs extremely smoothly and enables precise processing results, even on larger workpieces. Features & Equipment: - Massive, long-lasting construction - Suitable for continuous operation - Pneumatic components (6 bar required) - High grinding capacity with 6.5 kW drive - Made in Germany – proven industrial quality Condition: Used, fully functional. Age- and use-related signs of wear are present, but technically ready for operation. Areas of Application: - Metal fabrication - Stainless steel processing - Grinding and finishing work - Industrial and workshop use Hnsdeyvrtzopfx Ab Ijt Other Information: Viewing by appointment possible. Loading can be assisted. All information without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 1995, Deckel SOE tool grinding machine, manufactured in 1995. Accessories: collets, various grinding wheels. In good, operational condition. Hnedpozx Rwuofx Ab Iet

Condition: ready for operation (used), functionality: fully functional, grinding length 500 mm grinding width 200 mm workpiece height 250 mm Hodpfsz Aynwex Ab Isnt table surface 600 x 200 mm grinding wheel dimensions 225 x 20 x 51 mm grinding spindle drive 1.5 kW table feed 1 - 20 m/min total power requirement 2.6 kW machine weight approx. 2 t machine dimensions approx. 2.6 x 1.6 x 1.8 m

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport Hsdpfx Abjzuzb Ao Ient - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 146978, Knuth Surface Grinding Machine Flat HFS 2500C Working Area & Capacities Table dimensions: 250 x 500 mm Hnedoy H Dg Iopfx Ab Iot Grinding area (max.): approx. 500 x 250 mm Maximum workpiece weight: 180 kg Distance spindle center to table surface: 450 mm Travel Distances & Feeds Longitudinal travel (X-axis): 560 mm Cross travel (Y-axis): 275 mm Hydraulic table feed (X): 7 – 23 m/min Rapid traverse cross (Y): 990 mm/min Rapid traverse vertical (Z): 460 mm/min Spindle & Grinding Wheel Grinding spindle motor power: 2.2 kW Grinding wheel dimensions: 200 x 20 x 31.75 mm Graduation: Y-axis 0.02 mm / Z-axis 0.005 mm Dimensions & Weight Machine dimensions (LxWxH): approx. 2650 x 2150 x 1675 mm Total weight: approx. 1800 kg

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Quantity: - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines - Suitable for metal edge preparation and beveling applications - Supplied in transport cases - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. The listed price is for both units. Individual sale can also be arranged. Hsdpfjzyah Ssx Ab Ijnt Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Year of construction: 2013, operating hours: 5,200 h, condition: excellent (used), functionality: fully functional, We offer this very good Comandulli SPEEDY SYSTEM D8 automatic stone edge polishing machine, year of construction 2013. Manufacturer: Comandulli Model: SPEEDY SYSTEM D8 Year of construction: 2013 Hnjdpsycxyaefx Ab Ijt Condition: very good If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2007, total length: 1,700 mm, total width: 900 mm, total height: 1,200 mm, overall weight: 300 kg, height adjustment type: electric, grinding belt length: 2,650 mm, grinding belt width: 150 mm, Volpato edge sander – MADE IN ITALY! - Working height: 150mm - Sanding belt length: 2650mm - Mechanical sanding belt oscillation - Main motor: 2.2 kW - Control panel - Sanding at angles from 5 to 90 degrees - Year: 2007 Machine dimensions: - Length: 1700 mm - Width: 900 mm - Height: 1200 mm - Weight: 300 kg Machine testing is possible on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl Hjdpfjzxyuvox Ab Ijnt We have the following machines available: band saws, circular saws, crosscut saws and panel saws, planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planers, 4-sided, 3-sided, three-sided, two-sided, thicknessers, jointers, sanders, planers, combined planer-jointers, combined planer-thicknessers, combined jointer-thicknessers, thicknesser-jointers, cleaning machines, mortisers, tenoners, parquet machines, trimmers, edge trimmers, machines for log homes, milling machines, routers, spindle mounters, top routers, bottom routers, sanders, wide belt sanders, throughfeed sanders, roller sanders, disc sanders, angle sanders, jointers, drills, drilling machines, horizontal, radial, milling machines, multi-spindle, edge banding machines, edge banders, veneer machines, presses, lathes, sawmills, briquetting machines, chippers, wood chippers, dowel machines, mortising machines, dust extraction systems, extractors, fans, compressors, sharpening machines, multi-functional machines.

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 380 V, Cylindrical grinding machine, VEB Schleifmaschinenwerk Berlin (WMW), type SI 40×70, year of manufacture 1962 (factory number 1383/62). The machine is complete and features the original control panel (ON/OFF/STOP). It is in working condition and can be inspected and tested on-site before purchase. Technical specifications: Type / design dimensions: SI 40×70 Factory number / year of manufacture: 1383/62 Total weight: 1.5 t Current flow system: SI 40-8DT Wiring system: SI 41-002 Type of current: 3-phase alternating current (3~) Frequency: 50 Hz Operating voltage (input): 380 V Distribution voltage: 220 V Hodpfeznu Trox Ab Isnt Connected power: 2.8 kW Slow-blow fuse: 20 A Manufacturer: WMW / VEB Schleifmaschinenwerk Berlin – a German brand known for its robust, industrial-grade cylindrical grinding machines from that era. Transportation throughout Poland is possible, subject to prior arrangement. We provide a VAT invoice or receipt. Please contact us to arrange details regarding collection / transportation – Tel. 793697064.

Condition: good (used), Year of construction: 1978, Knife grinding machine with 1300 mm grinding length, equipped with a swiveling magnetic rail. The machine is labeled Vollmer but was built by Reform. Function tested. Hnodpeynt I Njfx Ab Ist

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop Hsdpfx Abeztl Scj Isnt - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Hnodjy Shzaepfx Ab Iet Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: ready for operation (used), DELTA LC 400 – Rotary table grinding machine - Magnetic clamping plate (rotary table) 400 mm - Max. grinding diameter 400 mm - Grinding height (distance table - grinding wheel) approx. 230 mm - Spindle speed 2850 rpm - Fine feed 0.01 mm - Distance column - grinding wheel axis approx. 320 mm - Spindle motor 3 kW - Grinding wheel dimensions 200x80x78 mm - Lateral grinding wheel dressing device - Machine housing - Coolant system - Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight approx. 700 kg Errors and omissions excepted. Hodpfx Aboznvcbe Ijnt

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, spindle speed (min.): 10,000 rpm, spindle speed (max.): 60,000 rpm, Equipment: rotational speed infinitely variable, Overbeck overhauled in 2015 and equipped with fast frequency spindle SC3060-V1000, frequency converter SD2T 3.8kVA and cooling unit PHK525 HZ, cooling capacity 550W Hsdpsu Aqt Eefx Ab Isnt

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Hjdpfx Aezwm Akjb Ijnt Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: used, Year of construction: 1995, operating hours: 9,000 h, functionality: fully functional, center height: 225 mm, grinding length: 1,600 mm, STUDER S40 CNC Universal Cylindrical Grinding Machine with Polygon Grinding Attachment For sale is a STUDER S40 CNC universal cylindrical grinding machine, manufactured in 1995, with a GE Fanuc Series 16-GC control system and a polygon grinding attachment. The machine is equipped for various cylindrical grinding tasks and enables, among other things, face, plunge, internal, and cylindrical grinding. Additionally, the machine is equipped for polygon grinding. Technical Data Manufacturer: STUDER / Studer AG Model: S40 CNC Year of manufacture: 1995 Machine No.: 011.0166.60.028 Control system: GE Fanuc Series 16-GC Center distance: 1,600 mm Cross slide X: max. 275 mm Resolution: 0.0001 mm Maximum table swivel: 8.5° Equipment – Polygon grinding attachment – 2 grinding wheels plus 1 internal grinding unit, selectable via the control system – Face, plunge, internal, and cylindrical grinding – Automatic truing device – Steady rest Hnedozw E Npjpfx Ab Iet – Magnetic chuck – Three-jaw chuck – Collets – Grinding between centers – Cycle control – DXF import – Grinding wheels in corundum, diamond, and CBN available – STUDER hand-held control unit The machine is in used condition with signs of wear and tear consistent with its age and use. An inspection is possible after prior arrangement. Price: €60,000 negotiable plus VAT. Location: 74343 Sachsenheim Collection/shipping by arrangement. Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 1993, operating hours: 6,700 h, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, total height: 2,660 mm, total length: 3,550 mm, total width: 3,150 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, table length: 1,000 mm, type of input current: three-phase, table width: 550 mm, grinding wheel width: 100 mm, overall weight: 6,100 kg, grinding spindle motor power: 11 W, input voltage: 400 V, disc diameter: 400 mm, We are offering this used ELB-Schliff BD10 Perfekt NC surface grinding machine, manufactured in 1993. Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 37 A Fuse: 50 A Control voltage: DC 24 V DC voltage: 215/320 V Hnsdpfx Abezzlxxo Ist Retrofit and conversion to NC with modern control Scraped X and Z axes, control cabinet completely new Overhead and table dresser Magnetic clamping plate 1000x550 High productivity due to max. grinding wheel width of 100 mm (400x100x127) Unused, attractive accessories available on request CBN & Dia grinding wheels, 1 additional flange, vacuum table 600x400 If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Rotary table surface grinder ARTER A3 - 16 - Grinding diameter approx. 450mm - Grinding height approx. 220mm - Workpiece weight approx. 250kg - Automatic feed - Coolant system - Machine enclosure - Work light Hsdpfszpfz Ajx Ab Iont Dimensions: L x W x H 2.5 x 1.5 x 1.7 meters / Weight approx. 3500kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Jung JF 520 D year of manufacture 1988 magnet 500 x 175 mm max. grinding area 600 x 220 mm variable speed variable magnetic field strength automatic start diaform coolant/filter tank Hsdpfx Abozba Ngo Ijnt 3 x flange 1 x clamp documentation machine is powered on for inspection

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, overall weight: 10,000 kg, - Year of manufacture: 2002 - First owner: from our own use and first hand - Fully functional, under power, ready for demonstration - Centre height: 230 mm - Centre distance: 2000 mm - Max. grinding diameter: 355 mm Hnsdpfx Aboylh Ras Iet - External grinding wheel, standard: 500x80x203 mm - Surface grinding wheel, standard: 400x40x127 mm - Control: Siemens 840 D - Drive power external grinding spindle: 9 kW - Drive power internal grinding spindle: 2.2 kW - Total connected load: 25 kW - Total weight: 10,000 kg - Machine no.: 3021600302 Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hnodpozyz Efefx Ab Ist Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: reconditioned (used), Year of construction: 2011, machine/vehicle number: GG110C 19624, total length: 8,355 mm, total width: 1,550 mm, total height: 2,700 mm, overall weight: 3,600 kg, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, working height: 800 mm, power: 27 kW (36.71 HP), pressure: 6 bar, year of last overhaul: 2026, Straight-line edging machine for heavy-duty production; equipped with 3 diamond grinding wheels, allowing for the processing of glass up to 50mm thick. Minimum glass dimensions: 40x40mm; Glass thickness: 3-50mm; Speed: 0.6-6 m/min; Hnodpfx Ajzq Dkrsb Iet Installed power: 27 kVA; Weight: +/- 3600 kg.