Used Edge Grinder for sale (5,001)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, input frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Fpjdpjuynnujfx Ap Don

Condition: like new (used), Sanding belt height: 200 mm Mechanical oscillation of the sanding belt Raising/lowering of the sanding unit controlled from the control panel Main motor power: 2.5 kW Possibility of sanding using a platen or flat surface Adjustable table angle Capability to sand curved elements 380 V Year: 1998 Fpedpfx Ajzxyfnop Dsn

Condition: excellent (used), Technical data: Grinding belt width: 150 mm Dimensions of fixed working table: 1000x400 mm Dimensions of tilting work table: 1000x350 mm Mechanical oscillation Extraction nozzle 2x120mm Power supply: 380 V Motor rotation: 1300 r/min Motor power: 3 kW Overall dimensions: Length: 1,850 mm Fsdpfxsu Rmado Ap Dspn Width: 1 400 mm Height: 1,350 mm

Condition: excellent (used), functionality: fully functional, - Manual table adjustment - Manual belt angle adjustment Fsdpfxey N N Nts Ap Depn - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW - 400 V - Year: 2002

Condition: good (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 640, total length: 2,500 mm, total width: 1,000 mm, total height: 1,800 mm, type of input current: three-phase, overall weight: 600 kg, height adjustment type: mechanical, input voltage: 380 V, grinding height: 100 mm, Milling and edge grinding machine with oscillating unit for narrow surface grinding Fpodjvw Eh Aopfx Ap Don

Condition: excellent (used), functionality: fully functional, - Belt width: 150 mm - Grinding possible on the platen or flat surface - Table angle adjustment - Capability to grind curved elements - Manual table height adjustment Fedoy N N N Hepfx Ap Dopn - Motor: 3.4 kW - 380 V - Year: 1992

Condition: excellent (used), Technical data: Abrasive belt width: 150 mm Abrasive belt length: 2650 mm Fpjdswv Swajpfx Ap Dsn Worktable dimensions: 16680x700 mm Additional roller for sanding irregular edges Oscillation Power supply: 400 V Motor power: 2.4 kW Overall dimensions: Length: 1680 mm Width: 700 mm Height: 1560 mm

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking Fpjdpfx Aezinlwop Djn TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Condition: new, The HB1000 is a universal edge sander with oscillating belt and sanding head, featuring adjustable height, designed for demanding work with large-sized components. The machine can be used for sanding veneer edges, sanding edges on a mandrel, or using sanding rollers of different diameters. Due to these features, the HB edge sander is suitable for both small and large workshops. Technical data: Work table dimensions: 1000x400 mm Sanding belt width: 200 mm Sanding belt length: 3200 mm Sanding belt speed: 13 m/min Work table tilt: 0 - 45 ° Motor power: 3 kW Dust extraction port diameter: 2x120 mm Fjdpjziag Tjfx Ap Dopn Adjustable sanding head height Mechanical sanding belt tensioning Oscillating sanding unit Overall dimensions: Length: 1850 mm Width: 1150 mm Height: 1350 mm

Condition: excellent (used), functionality: fully functional, Double-sided grinder Grützmacher GSP10 Working width: 200-1000 mm Working height: 230 mm Number of units: 2 Mechanical oscillation of sanding belts Fpedpfx Apexmgrqj Dsn Pneumatic head approach Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm

Condition: excellent (used), OMAB/Comec curved part grinder Fedpfx Apstvfmhs Dopn Working width 200mm Sanding belt oscillation Pneumatic material clamping Main motor 5.5kw Feed motor 0.25kw Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg

Condition: excellent (used), Volpato LASM Edge Sander Mechanical oscillation Constant grinding speed 1.5k3 motor Grinding height approx. 100mm Fsdpowcflqofx Ap Dopn Belt length 2640mm Height 130mm Extraction nozzle fi 100mm

Condition: excellent (used),

Condition: new, machine/vehicle number: M1-KS2260, Holzprofi Maker oscillating edge belt sander, a solid sanding machine for craft and business Technical data: Band dimensions 2260 x 150 mm Engine power S1: 2,2 KW , 400 V Fpjdovw Ed Dopfx Ap Dsn Table length 750 mm Tabhle width 250 mm Belt speed 16 m/sec Space required 1325 x 570 mm Extraction connection 100 mm Weight 156 kg

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder Fpodpsxdh Hqsfx Ap Den • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), Volpato LBK 150 edge grinder Grinding belt height 150mm Length of the grinding belt 2650mmm Fpjdpfx Aevdpyvep Djn Oscillation of the grinding belt mechanical Raising/lowering the unit from the control panel Main motor 3kw Oscillation motor 0.37kw CE certificate Extraction nozzle 110mm

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Fpsdpfsya Hmiox Ap Den Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Fsdpjz Ekkxsfx Ap Depn Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Fpsdpev Aailofx Ap Don

Condition: excellent (used), Drills grinder for sharpening of twist drills, diamond drills, step drills, center drills, counterborers, standard 2-3-4-6 cutting edges taps,etc. Fpsdpfxezhbqwo Ap Don

Year of construction: 2025, operating hours: 140 h, condition: like new (used), functionality: fully functional, machine/vehicle number: X-1500, Equipment: CE marking, Only 12 months old – like new , only 140 working hours. Immediate availability. Full documentation + CE. Can be demonstrated producing corners. Unique capability: up to 130×130 mm. Fpsdpfx Aoz I S Idsp Den Perfect condition – ready for production. Manufacturer: SIA Model: Edge Protector 130x130, Slitter 1500x1500, SCC Base 7 Year of Manufacture: 2025 Working Hours: 140 hours Technical Condition: Like new State: In production Edge Protector Specifications: - Size: Minimum 35x35mm, Maximum 130x130mm - Wall Thickness: Minimum 1.5mm, Maximum 8mm (10mm optional, depending on paper thickness) - Maximum Reels: 12 + 1 craft - Speed: 50m/min (60m/min optional, available on data regulation) - Glue heating - 7,5kw. Slitter Rewinder Specifications: - Reel Size: Maximum 1500x1500mm, Minimum Width 500mm - Minimum Cutting Width: 35mm - Number of Knives: 15 - Speed: Maximum 250m/min - Electrical Power: 11kW SCC Air Compressor Specifications: - Base: SCC Base 7 VSD TD - Electrical Power: 7.5kW - Air Volume: 0.92m³/min - Tank Volume: 500 liters Dimensions: EDGE PROTECTOR ; SLITTER : Length: 26000 mm; 3000MM - Width: 3000 mm ; 2300MM - Height: 2500 mm ; 1300MM - Weight: 6000 kg ; 3500KG Keywords: corner production line, cardboard corner machine, edge protector machine, packaging corner line, cardboard profile machine, V profile machine, 130×130 mm corner, automatic corner cutting, high‑speed corner line, packaging machinery, cardboard converting machine, protective corner production, industrial packaging equipment.

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Fpjdpfxjz En Axj Ap Djn Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: refurbished (used), Year of construction: 2013, Grinder LASKA WW-200 2013 year After technical inspectrion 3 months warranty for parts. All bearings, bushings and rollers new. Fedpfxezy Hmno Ap Dspn New cutting set Delivery time: ready

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports Fpsdpfez Rk E Ujx Ap Don • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Fpjdpeuw Skhsfx Ap Djn Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Adapted for liquid cooling ----- -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Number of blades: 3 Motor: 22 kW / 30 HP Adapted for liquid cooling Prices: Mill No. 1: €7,200 Mill No. 2: €5,900 Price for buying both machines: €11,900