Used Edge Machine for sale (65,805)

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2011011, Edge grinding machine, Montresor model Lola 1000 8+6 SX Todpfjzwx Husx Abtsb • Belt running direction: LEFT to RIGHT, year of manufacture 2011 #2011011 • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 pneumatic upper chamfer supports • Belt infeed: Calibration/profiling support • Belt outfeed: Water nozzle support • Table extension console, extended • Machine footprint approximately: 610 x 180 cm • Infeed and outfeed path, each 250 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not included with the machine/scope of delivery. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness. Warranty: • Machine sold as is, excluding any warranty claims. Inspection: • Possible at the operating site near Passau. Availability: • After delivery of the new machine in December 2026 / January 2027.

Condition: good (used), Year of construction: 1989, Machine with full equipment Tsdpfx Ajf Ua R Hebteb Length approx. 9 m Jointing Rip sawing Dadoing Rounding Edge profiling Scraping Edge profiling

Condition: good (used), Year of construction: 2002, Edge banding machine with joiner milling cutter. Otherwise, fully equipped. PU adhesive can be used. Todpfxegmn H As Abtob

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Tedpfxsztl Sce Abtsb Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Tsdpfx Aszv Eaxebteb Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Tsdpfezmy N Nox Abtjb Weight 900 kg

Condition: like new (used), Year of construction: 2007, total length: 1,700 mm, total width: 900 mm, total height: 1,200 mm, overall weight: 300 kg, height adjustment type: electric, grinding belt length: 2,650 mm, grinding belt width: 150 mm, Volpato edge sander – MADE IN ITALY! - Working height: 150mm - Sanding belt length: 2650mm - Mechanical sanding belt oscillation - Main motor: 2.2 kW - Control panel - Sanding at angles from 5 to 90 degrees - Year: 2007 Machine dimensions: - Length: 1700 mm - Width: 900 mm Todpfx Abozxyuvjtob - Height: 1200 mm - Weight: 300 kg Machine testing is possible on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines available: band saws, circular saws, crosscut saws and panel saws, planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planers, 4-sided, 3-sided, three-sided, two-sided, thicknessers, jointers, sanders, planers, combined planer-jointers, combined planer-thicknessers, combined jointer-thicknessers, thicknesser-jointers, cleaning machines, mortisers, tenoners, parquet machines, trimmers, edge trimmers, machines for log homes, milling machines, routers, spindle mounters, top routers, bottom routers, sanders, wide belt sanders, throughfeed sanders, roller sanders, disc sanders, angle sanders, jointers, drills, drilling machines, horizontal, radial, milling machines, multi-spindle, edge banding machines, edge banders, veneer machines, presses, lathes, sawmills, briquetting machines, chippers, wood chippers, dowel machines, mortising machines, dust extraction systems, extractors, fans, compressors, sharpening machines, multi-functional machines.

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Tjdpfezbyt Ejx Abtob Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V - Power voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! Tedpfoy Sap Asx Abteb The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Tedjv Sv Enopfx Abteb Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Tjdsy Iu N Aspfx Abteb Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: good (used), Year of construction: 2009, 0,4-6 mm Tjdpfxozvq Eyo Abtsb Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Todpfxjziyvhj Abtjb Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: used, LASM belt edge grinder, Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, Todpfx Aszxz Tajbtob 150mm wide abrasive belt, Oscillation, Angle-adjustable table, Used machine, ready for operation.

Condition: excellent (used), Catalog number: 8075 TECHNICAL DATA - Table length: 2200mm - Table width: 700mm - Main motor: 2.2kW - Manual beam lifting - Abrasive belt width: 160mm - Grinding head - Dust extraction nozzle diameter: 120mm - Overall dimensions (L/W/H): 3060x1240x1430mm - Weight: 250kg ADVANTAGES – Made in Austria – Unpainted – Used sander, very good condition Net price: 6500 PLN Tjdjzuk Huepfx Abtob Net price: 1548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Tsdpfjw Nadgex Abtob Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1991, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 290-02-1819, total length: 2,670 mm, total width: 1,500 mm, total height: 1,200 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 380 V, space requirement width: 1,800 mm, space requirement height: 2,000 mm, space requirement length: 5,000 mm, Edge sander, capable of sanding profiled strips on the first unit; the second unit is for flat sanding, and the third unit has a brush. Tedpfx Aezvy A Uebtob

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-cutter 10 end faces Tjdpfszpy Drjx Abteb 4 chamfers 2 water jets Calibration support Belt feed direction from left to right

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Conductor cross-section: 5×6 mm² If you have any questions or require further information, please send us a message or call us. Tedpfxezvqcls Abteb

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Tedpjzafppsfx Abteb Total length 4130 mm Feed speed 11 m/min. Weight 1250 kg

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein ja ja/nein ja ja/nein tiltable up to 30 Grad Motor output 2,8 kW Tsdpezfqkzofx Abtjb Table dimensions 850 x 300 mm sanding width 150 mm Weight 330 kg

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edgebander LUMINA 1380 Multi PUR & EVA glue application (up to 60mm) + NIR unit / laser edging up to 45mm, as exchangeable station Jointing milling unit IntelliSet - tool correction fa.s.t. - Set-up on the fly iTronic - pressure & glue quantity control Fully motorized configuration of all units Multi-function milling units - 1.3mm radius (double) & 2mm (double) Spraying units and much more... The machine is currently being refurbished at the factory in Voitsberg, Austria. Delivery, installation, and commissioning can be arranged directly through us at additional cost. The machine is currently located in our distribution warehouse in Gratwein, Austria. Todpfsx E A Disx Abteb In the event of discrepancies between the German and a foreign language version, only the German version is binding. Our Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Tedpszwlnrjfx Abtsb Including spare parts, consumables Full line has less than 2000 working hours Very good condition Available for inspection

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Todpjy Nznusfx Abtsb

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 Tedpfx Ajzw Et Isbtob . Series : B20 .