Used Electrical Drawing for sale (31,211)

Condition: new, weight max. in kg 1600 kg fork length 1150 mm stroke height 4500 mm high 2020 mm Kjdovn Uyiepfx Aabenc weight of the machine ca. 0,92 t dimensions 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Knodpfxsvuuikj Aabec Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 - overhaul 2005 mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: ready for operation (used), Year of construction: 2017, operating hours: 235 h, General Data Machine weight 21500 kg Injection Unit Screw diameter 70 mm Shot weight 1172 g Injection pressure 1856 bar Clamping Unit Clamping force 350 T This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine. Ksdpfx Aew Say Heabonc Application Types Injection Moulding

Condition: used, Year of construction: 2023, operating hours: 500 h, functionality: fully functional, power: 200 kW (271.92 HP), type of input current: AC, We are selling parts from a Steam Methan Reforming plant in Norway. In this case we have two heat exchangers and one electrical steamer from a company Boiler Tech in Norway. Documentation in the attachments Knsdpfx Aoxg I A Reabec

Condition: good (used), Inexpensive from Swiss liquidation Knedpfxsukunne Aabec

Condition: excellent (used), Year of construction: 2008, X,Y travel: 14.6" x 10.6" U,V,Z travel: 3.9" x 3.9" x 10.2" Knedpfx Aaowqq Rhobec Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Drive system: AC servo motor/linear motor Wire diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb Taper angle: ±21°/4.33 in (DA+DB=0.6 in) Layout (W x D x H): 90.6" x 89.2" x 80.6"

Condition: new, weight max. in kg 1600 kg fork length 1150 mm stroke height 5500 mm high 2385 mm weight of the machine ca. 1,2 t dimensions 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast Ksdpfxjvn Uzys Aabsnc - Lithium-ion battery - quick lifting and lowering - low overall height

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Knodpfevuuh Tsx Aabjc Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Kedpfxjw Slnis Aabjnc Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Condition: good (used), Electric transformer E.R.E 1 250 kva Year 2002 Knodpfsr I Sm Esx Aaboc

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system Kjdpfx Ajw Sm Tyeabsnc - HSJ technology (High Speed Jump)

Condition: good (used), Travel on X axis (longitudinal) 400 mm Travel on Y axis (transverse) 250 mm Travel on Z axis (vertical) 400 mm Max. workpiece length 850 mm Max. workpiece width 500 mm Max. workpiece height 400 mm Max. workpiece weight 1000 kg CNC type CHARMILLES Tank length 1200 mm Tank width 700 mm Tank height 400 mm Plant closure sale: various machines, accessories, cutting tools, tool holders, vices. Please call for contact; no replies to OLX messages. Prices are net and open to reasonable negotiation. Kedpfx Aoxbm Uzsabenc 1. Bench drill press 2. Jungner surface grinder 3. SPC 20 surface grinder 4. Surface plate (layout table) 800x500 5. MAHO 800 6. 2D dividing head, diameter 300 mm 7. 3D dividing head, diameter 300 mm 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM 10. Charmilles Drill 11 die sinking EDM 11. Metal bandsaw

Condition: used, Year of construction: 2014, weight max. in kg 1600 kg fork length 1450 mm Kjdpfx Aajv Ehcxjbjnc stroke height 200 mm high 1150 mm weight of the machine ca. 0,68 t dimensions of the machine ca. 2,05 x 0,72 x 1,15 m incl. charger

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Knjdpfxovuuhgj Aaboc Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Year of construction: 2007, condition: as good as new (ex-display), Multiblock wire drawing line ( NEVER USED, LIKE NEW) Made in CHINA Construction year - 2007. No. of blocks - 9 blocks Knedpfx Aasdycirsbjc Blocks size - No.1-4= 560mm , No.5-9 =500mm Max INLET - 5,50 mm Min OUTLET - 1,55 mm Motors - type AC 380V, 50Hz , No1=30kW and rest 8 motors 22 kW Max speed - 13 meters/ second Please contact us for more details…..

Condition: like new (used), Year of construction: 2019, pressure:400 t Ksdpfx Aofh Izmeabjnc stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: refurbished (used), Year of construction: 1980, Technical Details : Knedow Dpqgepfx Aabsc Year - 1980/ 2020 reconditioned Speed - 7m/sec. Number of blocks - 7 Input wire diameter - 5,5 mm Output wire diameter - 2,0 mm Line Consits : - Decoiler - Mechanical descaling and brushing - Wire drawing machine 7 blocks - Coil winder for coils up to 800 kg ( Vertical and horizontal spooler )

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Kodeibh S Hepfx Aabonc Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder.

Condition: new, weight max. in kg 1500 kg fork length 1150 mm stroke height 4150 mm high 2450 mm weight of the machine ca. 0,82 t Kedpequx S Djfx Aabonc dimensions 1,72 x 0,8 x 2,65 m

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Ksdpoxaphbofx Aabjnc

Year of construction: 1992, condition: reconditioned (used), Multiblock wire drawing line EURODRAW Max INLET wire diam. - 5,50 mm Outlet wire diam. - 1,60 - 4,80mm; Material - Low carbon steel wire Model - 460/7 Year - 1992. Number of blocks - 7 blocks Block diam. - 460 mm Number of drawing dies - 7 + coiler Knsdpfx Aofglx Ioaboc Max. pull on 1st draft: 800kg Final drawing speed: 15m/sec. Main D.C. motor power: 7 x 33.6kW, 1620 RPM Supply voltage: 415V – 50 Hz – 3 phase Take-up: ROT 560 coiler Machine is MECHANICALLY fully reconditioned , Electric ORIGIN from 1992. Line consist of the following parts - 1. Payoff 2. Mechanical descailer with bruches AND dust collecting unit 3. Chemical wire threatment unit 4. Drawing line with 7 blocks 5. Coiler 6. Electrical cabinet

Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 100 t, Equipment: safety light barrier, DOUBLE-ACTION PRODUCTION PLACE TURKEY Knsdpfx Aovy Daisabec WARRANTY PERIOD 24 MONTHS 300/100 TON H TYPE HYDRAULIC PLASTERING PRESS FOR TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8-SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR SLIDE BEARING BRONZE Zr14 CAPACITY (RAM) 300 TONS CAPACITY (POT) 100 TONS MOVABLE TABLE DIMENSIONS 1200 x 1500 mm FIXED TABLE TABLE DIMENSIONS 1200 x 1500 mm PARALLELITY TOLERANCE 120 micron/mt. HORIZONTAL TOLERANCE 60 micron/mt. STROKE (RAM) 800 mm STROKE (POT) 300 mm MIN. INTERMEDIATE SPACE 100 mm MAX. INTERMEDIATE SPACE 900 mm WELDING STRESS RELIEF Stress relief by vibration WELDING APPLICATION EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) MAX. WORKING PRESSURE 250 Bar TOTAL MOTOR POWER 37 kW– IE3 MAIN PUMP 45 cm³ – REXROTH or PARKER MOVING TABLE RAPID Descent Speed 150 mm/sec. MOVING TABLE PLASTERING Speed 12 mm/sec. MOVING TABLE RETURN SPEED 170 mm/sec. POT TABLE FORWARD SPEED 30 mm/sec. MAIN CYLINDER INNER DIAMETER Ø 390 mm – Ck45 POT CYLINDER INNER DIAMETER Ø 230 mm – Ck45 AUXILIARY ACCELERATOR CYLINDERS 2 pcs. APPROXIMATE HEIGHT OF PRESS 4400 mm APPROXIMATE WIDTH OF PRESS 3250 mm APPROXIMATE DEPTH OF PRESS 2200 mm LOWER TABLE HEIGHT FROM GROUND 1350 mm PRE-FILL VALVE NG 150 HYDRAULIC UNIT REXROTH or PARKER COOLING SYSTEM SUCTION – CIESSE – PARKER OFF-LINE FILTRATION REXROTH or PARKER MOTOR CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR REXROTH or PARKER AIR FILTER REXROTH or PARKER – 10 MICRON PERMEABILITY RETURN FILTER REXROTH or PARKER – 25 MICRON PERMEABLE OIL AND HEAT INDICATOR REXROTH or PARKER VALVES USED REXROTH or PARKER FILTER CONTAMINATION WARNING ELECTRONIC CONTROL LUBRICATING STYLE AUTOMATIC – (CAN BE ADJUSTED FROM THE SCREEN) RAM STROKE SETTING CAN BE ADJUSTED FROM THE SCREEN POT STROKE SETTING CAN BE ADJUSTED FROM THE SCREEN RAM TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN POT TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE VISIBLE ON THE SCREEN PRESS STATUS INFORMATION CAN BE VISIBLE ON THE SCREEN MOLD MEMORY CAN BE VISIBLE ON THE SCREEN ADJUSTABLE HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE SEEN ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK or TURCK PLC APPLICATION DELTA TOUCHSCREEN DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER APPROXIMATE WEIGHT 21 TONS

Condition: used, Year of construction: 1991, Technical Details : Year - 1991 Speed - 20 m/sec Number of Blocks - 13 +1 Knjdpsw Dpm Uefx Aabec El. Power - 13x55 Kw , 1x60 Kw,1x55 Kw Danser arms Inlet wire - max. 7 mm ( height and low Carbon ) Output wire - 1,2 - 2,4 mm Condition - excellent - Refreshed in 2020 Line consists : - Mechanical wire pay off - Mechanical wire cleaning unit - Line with 13+1 blocks - wertical dead block + Horizonttayl unwinding unit

Condition: used, Year of construction: 2017, weight max. in kg 2200 kg fork length 1190 mm stroke height 250 mm high 1,3 mm weight of the machine ca. 0.9 t Ksdpfx Aevki Dnsabenc dimensions of the machine ca. 2,5 x 0,73 x 1,3 m Forklift truck Elekrto New battery from 2023 including charger Very good condition!!

Condition: new, Year of construction: 2025, pressing force: 1,200 t, table width: 1,500 mm, table length: 2,000 mm, retraction force: 400 t, Equipment: safety light barrier, DOUBLE EFFECTIVE PRODUCTION PLACE TURKEY WARRANTY PERIOD 24 MONTHS - Steel construction body and parts with stress / welding tension relieved by vibration method - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system 1200/400 TON H TYPE HYDRAULIC PLASTERING PRESS FOR TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8 SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR SLIDE BEARING BRONZE Zr14 CAPACITY (RAM) 1200 TON CAPACITY (POT) 400 TON MOVABLE TABLE DIMENSIONS 1500 x 2000 mm FIXED TABLE TABLE DIMENSIONS 1500 x 2000 mm PARALLELITY TOLERANCE 120 micron/mt. PERpendicularity TOLERANCE 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. INTERMEDIATE SPACE 100 mm MAX. INTERMEDIATE SPACE 1100 mm WELDING STRESS RELIEF Stress relief by vibration WELDING APPLICATION EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) MAX. WORKING PRESSURE 250 Bar TOTAL MOTOR POWER 75 kW– IE3 MAIN PUMP 70 cm³ – REXROTH or PARKER MOVING TABLE RAPID DOWN SPEED 150 mm/sec. MOVING TABLE PLASTERING SPEED 12 mm/sec. MOVING TABLE RETURN SPEED 170 mm/sec. Knodpfsvy A Ulsx Aabsc POT TABLE FORWARD SPEED 30 mm/sec. MAIN CYLINDER INNER DIAMETER Ø 560 mm – Ck45 - 2 pcs. POT CYLINDER INNER DIAMETER Ø 450 mm – Ck45 AUXILIARY ACCELERATOR CYLINDERS 2 pcs. APPROXIMATE HEIGHT OF PRESS 6100 mm APPROXIMATE WIDTH OF PRESS 3550 mm APPROXIMATE DEPTH OF PRESS 2400 mm LOWER TABLE HEIGHT FROM GROUND 1450 mm PRE-FILL VALVE NG 200 HYDRAULIC UNIT REXROTH or PARKER COOLING SYSTEM SUCTION – CIESSE – PARKER OFF-LINE FILTRATION REXROTH or PARKER MOTOR CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR REXROTH or PARKER AIR FILTER REXROTH or PARKER – 10 MICRON PERMEABILITY RETURN FILTER REXROTH or PARKER – 25 MICRON PERMEABLE OIL AND HEAT INDICATOR REXROTH or PARKER VALVES USED REXROTH or PARKER FILTER CONTAMINATION WARNING ELECTRONIC CONTROL LUBRICATING STYLE AUTOMATIC – (CAN BE ADJUSTED FROM THE SCREEN) RAM STROKE SETTING CAN BE ADJUSTED FROM THE SCREEN POT STROKE SETTING CAN BE ADJUSTED FROM THE SCREEN RAM TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN POT TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE VISIBLE ON THE SCREEN PRESS STATUS INFORMATION CAN BE VISIBLE ON THE SCREEN MOLD MEMORY CAN BE VISIBLE ON THE SCREEN ADJUSTABLE HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE SEEN ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK or TURCK PLC APPLICATION DELTA TOUCHSCREEN DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER APPROXIMATE WEIGHT 75 TONS