Used Combined Drawing for sale (6,149)

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of cutting unit (cm): 175 * Weight without cabin (kg): 0 * Grain tank capacity (hl): 6.5 * Model: MF30-6 * Serial number: 0D7758 * Year of manufacture: 1967 ---- Internal vehicle number: 8144 ---- Errors and prior sale reserved. WhatsApp support available! Bjdpfx Ansvhvf Todsdi If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Bdodpjz D Ihfefx Andei

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 4 kW (5.44 HP), For sale is a Felder AD 741, a combination jointer and thickness planer manufactured in 2019. This machine is suitable for professional use in carpentry and woodworking shops. Technical data: - Manufacturer: Felder - Model: AD 741 - Year of manufacture: 2019 - Motor power: 4.0 kW - Connection: 400 V, 3 phases, 50 Hz Bedo Ahqxwopfx Andedi - Current consumption: 8.6 A - Jointer table width: 410 mm - Thickness planer table width: 404 mm - Jointer table length: 2,000 mm - Thickness planing height: approx. 3–230 mm - Feed rate: 6 / 12 m/min - Max. material removal: approx. 4 mm - Weight: approx. 500 kg The Felder AD 741 allows switching between jointer and thickness planer functions. Please refer to the images for the exact equipment of the machine offered, in particular the cutterhead and any special accessories, or inquire if interested. Inspection is possible by arrangement.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Bedpfx Ajr Nfvmsndedi Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: excellent (used), Year of construction: 1959, input voltage: 400 V, input frequency: 50 Hz, total length of planing tables: 1,800 mm, Combi 500 Combination Surfacing and Thicknessing Planer - 2-knife cutterhead - Table length: 1800mm - 2 dust extraction ports - Feed motor with 2 speeds - Year of manufacture: 1959 - 2-knife cutterhead, planing width 510mm, planing height 200mm - Aigner auxiliary fence and guide strip - Toothed steel feed roller, steel take-off roller - 2 dust extraction ports - 2 sliding rollers in the thicknessing table Bdedpfx Aoy Tuctondoi

Condition: good (used), machine/vehicle number: 17346, functionality: fully functional, power: 4.78 kW (6.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, number of blades: 4, rotational speed (max.): 5,500 rpm, HK 63 combined jointer/thicknesser - Planing width 630 mm, - Cutterhead width 640 mm, - 4-knife cutterhead, - Table length approx. 2100 mm, - Planing height 2-230 mm, - Toothed steel infeed roller, steel outfeed roller, - 2 sliding rollers in the thicknessing table, - Motor 6.5 HP, Bdedpfo Ahmy Uex Andsi - Speed 5000 rpm, - Feed rate 10 / 16 m/min, - Adjustable fence for the jointer

Condition: used, used cleaned functionally tested Manufacturer: BGU Type: KAD 409 S Machine No.: 1179458 Number of knives: 2 Table lips, low-noise Safety wedge bar knife shaft Motor kW: 4.0 Planing width approx. mm: 400 Planing height approx. mm: 200 Table length approx. mm: 700 Dust extraction connection mm: 120 and 100 Space required approx. L x W x H mm: 1500x1100x1100 Weight approx. kg: 400 Total connected load approx. kW: 4 Location: 97447 Gerolzhofen, free loading, unpackaged Handover in the current condition, as inspected, without guarantee or warranty Bjdpfxj Ahr Are Andjdi

Condition: excellent (used), 5-in-1 combination machine Manufacturer: SCM Samco Type: CU 350 K Saw, router, planer, thicknesser, and mortising machine Planer: Working width: 350 mm Table length: 1800 mm Adjustable fence: 90°-45° Motor: 3.0 kW / 400 V Bjdpfx Anj Ahnnpsdjdi Thicknesser: Working width: 350 mm Maximum feed height: 230 mm Panel saw: Sliding table: 1500 mm Cutting height: 100 mm Motor: 3.0 kW / 400 V Adjustable to 45° Router: Spindle diameter: Ø 30 mm Adjustable to 45° Motor: 3.0 kW / 400 V Spindle speeds: 1400/3500/6000/8000 rpm Circular guide Slotting device Mortising attachment Very good condition

Condition: good (used), Code: 0507 Brand: SCM MINIMAX - ITALY Model: CU 350 K - CE Standard Universal 5 works combined machine for joinery workshops, craftspeople, furniture makers, bespoke furnishings, doors, wooden joinery, DIY, panels and various applications – CE Standard Technical data: Base consisting of a single, fully welded steel monoblock Cast iron worktable Wide worktable surface area Three-phase motors V 380/50 Hp 3 each Surface planer: Working width 350 mm Total length of tables 1800 mm N° 3 blades Anodised aluminium guide adjustable from 90° to 45° Thickness planer: Table dimensions 600 x 350 mm Max/min working height 230/3 mm Max removal depth 5 mm Spindle moulder: Spindle length 136 mm Max rotational speed 8000 rpm Max tool diameter extending below the table 180 mm Circular saw: Carriage made of anodised extruded aluminium with a sliding system on steel guides Carriage stroke 1500 mm Max blade diameter 300 mm Blade tilting 90°–45° Cutting width at parallel guide 900 mm Squaring frame complete with guide, stops and a guide adjustable in both directions from 90° to 45° for angled cuts on panels Workpiece clamping presser N° 3 suction inlets diameter 120 mm Bdsdj Afwxlepfx Andoi Overall dimensions of assembled machine mm 2000 x 2400 x 1100 h Transport dimensions mm 2000 x 1400 x 1200 h Weight kg 600

Condition: good (used), Year of construction: 1987, For sale is a used Felder BF5-41 4-in-1 combination machine with a cutting length of 1200 mm. The machine has been inspected and refurbished by our service team. Bdsdpjz Symkofx Andji Technical data: - Cutting length 1200 mm - Cutting height 95 mm - Max. saw blade diameter 300 mm - 3 milling speeds - Planer width 410 mm - 4-knife cutterblock - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1987 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, multi-function machine, planer, thicknesser, circular saw Reference: R-E28JC

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. Bodpfjz Hngmsx Andedi The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: ready for operation (used), functionality: fully functional, Wire drawing polishing machine, ultrasonic / wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4-6 bar It is used to process or polish wire drawing dies through which metal wire is drawn. Bodpfx As Ag Dxbjndedi

Condition: used, Year of construction: 1976, machine/vehicle number: 8841, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressing force: 25 t Pulling force: 10 t Bdedpo Aa Nynofx Andsi Total power requirement: 11 kW Machine weight: approx. 3 t Stroke and working data Overhang: 260 mm Stroke: 500 mm Pulling stroke: 200 mm Table Table size: 500 × 500 mm Dimensions Space requirement: approx. 1.40 × 1.10 × 2.80 m EQUIPMENT Very robust design Two-hand operation Analog pressure gauge

Condition: new, Catalog number: S 0335 - New machine, in stock - CE certificate PLANER: - Dimensions of the work table: 1500 x 320mm - Max. cutting depth: 5mm - Dimensions of the aluminum guide rail, mm: 1100 x 155 THICKNESS PLANER: Bdodpfx Ane Af I Dijdei - Dimensions of the work table: 316 x 600mm - Max. cutting depth: 3mm - Cutting speed: 7m/min - Material thickness: 4 - 230mm - Motor power: 3kW - Spindle speed, rpm: 5600 - Dimensions (L/W/H): 1500/600/1050mm - Weight: 315kg * Cast iron worktops with a ground surface, * Tables with precise adjustment for longitudinal planing, * Stable aluminum guide rail with the possibility of tilting from 90° to 45°, * Spindle guard, * Work table of the thickness planer with a central guide column and carriage, * Power on/off without stopping the machine, * Mortising machine with left-hand rotation. Net price: 8900 PLN Net price: 2120 EUR Net price calculated according to an exchange rate of 4.20 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 1999, For sale is a used Hammer C3-31 Trend 4-in-1 combination machine with a cutting length of 1250 mm. The machine has been inspected and refurbished by our service team. Technical data: Bsdjz Sthuspfx Andodi - Cutting length 1250 mm - Cutting height 103 mm - 3 milling speeds - 3 system cutterhead shafts - Planing width 310 mm - Max. passage height 230 mm - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1999 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-J0001

Condition: used, Year of construction: 1993, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 160 t Retraction force: 40 t Bdedpfx Ans Aa Ngbsdoi Drawing cushion pressure: 630 kN Ejector pressure: 50 kN Total power requirement: 42 kW Machine weight: approx. 19.5 t Stroke and movement data Stroke: 300 mm Stroke speed: 400 m/min Stroke speed under load: 16–42 strokes/min Return speed: 350 mm/min Drawing cushion stroke: 100 mm Ejector stroke: 50 mm Table and ram Table size: 1,500 × 700 mm Ram clamping area: 1,200 × 560 mm Working area Overhang: 360 mm EQUIPMENT Drawing cushion Ejector

Year of construction: 2009, condition: ready for operation (used), Combined automatic float and laminated safety glass (VSG) cutting line manufactured in 2009. This LISEC Combined VSG & Float Glass Cutting Line features a robust configuration with breakout, transport, and trimming modules. It is currently installed and running in active production, allowing for turnkey inspection. If you are looking to get high-quality glass processing capabilities, consider the LISEC Combined VSG & Float Glass Cutting Line we have for sale. Contact us for further details. Bdodpfx Ae Agixyendoi - Plant Configuration: Combined automatic float and laminated safety glass (VSG) cutting line with breakout, transport, and trimming modules- System Manufacturer: LISEC Austria GmbH / LISEC Maschinenbau GmbH- Years of Manufacture (Line Integration): 2009 & 2016 (mixed installation)- Operational Status: Currently installed and running in active production (turnkey inspection possible)- Standard Line Voltage: 400 V / 50 Hz (3/N/PE~ 400V, Control: 24V AC/DC)- Operating Compressed Air: 6.00 – 8.00 bar- Total Cumulative Installed Weight: > 28,400 kgMODULE BREAKDOWN & INDIVIDUAL SPECIFICATIONS:1. VSG (Laminated Safety Glass) Processing Section:- Pos 01: LISEC PTV-60/30RE (YOM: 2009) * Type: Laminated glass cutting machine (Verbundglasschneidanlage) * Weight: 5,640 kg | Electrical: 400 V / 50 Hz- Pos 02: LISEC VZ Linie 2 (YOM: N/A) * Type: Assembly unit / line connection section- Pos 03: LISEC LKT-45/45TS (YOM: 2009) * Type: Processing / support air-cushion table * Weight: 3,200 kg | Connected Load: 61.28 kVA | Air: 8.00 bar- Pos 04: LISEC VB-33 (YOM: 2009) * Type: Laminated glass line sub-assembly * Weight: 2,200 kg | Connected Load: 17.00 kVA | Air: 6.00 bar- Pos 05: LISEC FASV-33 (YOM: 2016) * Type: Automated protruding PVB film trimmer/remover * Weight: Not specified | Connected Load: 0.83 kVA | Air: 6.00 bar- Pos 06: LISEC VB-33 (YOM: 2016) * Type: Cutting machine for laminated glass * Weight: 2,200 kg | Connected Load: 18.83 kVA | Air: 6.00 bar | Max Load: 43 kg/m²- Pos 07: LISEC AL-32/33N (YOM: 2016) * Type: Glass stop locator and positioning section * Weight: 1,830 kg | Connected Load: 25.88 kVA | Air: 6.00 bar- Pos 08: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar | Max Load: 50 kg/m²2. Float Glass Processing & Transfer Section:- Pos 09: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar- Pos 10: LISEC BTA-40/26 (YOM: N/A) * Type: Horizontal transport / support table * Weight: Not specified | Electrical: Not specified- Pos 11: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 9.05 kVA | Air: 6.00 bar- Pos 12: LISEC BTS-37/33 (YOM: 2016) * Type: Manual breakout table with integrated breaking bars * Weight: 1,543 kg | Connected Load: 15.75 kVA | Air: 6.00 bar- Pos 13: LISEC LKT-10/33 (YOM: 2016) * Type: Horizontal air-cushion transfer table * Weight: 250 kg | Connected Load: 4.50 kVA | Air: 6.00 bar | Max Load: 33 kg/m²- Pos 14: LISEC BTA-40/26 (YOM: 2009) * Type: Horizontal belt transport conveyor unit * Weight: 1,154 kg | Connected Load: 2.30 kVA | Air: 8.00 bar | Max Load: 50 kg/m²- Pos 15: LISEC TBY-26/12 (YOM: 2009) * Type: Intermediate transport module * Weight: 255 kg | Connected Load: 0.00 kVA | Air: 6.

Condition: good (used), Year of construction: 1983, functionality: fully functional, Used, compact LUREM C 260 EN2 surface planer and thicknesser from 1983. The machine is suitable for surfacing and thicknessing solid wood. It features a planing width of approximately 260 mm, adjustable surfacing tables, and a swiveling fence. The thickness is adjusted mechanically via a handwheel. Robust and compact machine, well-suited for carpentry shops, workshops, and ambitious users. Technical data / Features Manufacturer: LUREM Type: C 260 EN2 Year of manufacture: 1983 Machine no.: C.J. 0.17 Working width / planing width: 259 mm Bdedpfx Ajzzah Iendji Motor power: 2.2 kW Max. speed: 6,400 rpm Thickness planer feed height: 140 mm Power connection: 400 V / three-phase Jointer cutter block Surfacing and thicknessing function Adjustable surfacing tables Fence included Height adjustment of the thickness table via handwheel Dust extraction connection available The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, overall weight: 9,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Dieffenbacher PO100 Pressing force 1000 kN / 100 tons Approach speed max. 300 mm/s Working speed max. 14 mm/s Connected power 30 kVA Stroke max. 500 mm Dwell time 95 ms Safety clearance 190 mm Tool height min. 200 mm, max. 700 mm Tool weight max. 1000 kg Tool length max. 1000 mm Tool width max. 700 mm Weight of upper part max. 500 kg Other: Light barriers, Siemens control system In top condition! Bdodpfx Anez Rzkhedei

Condition: excellent (used), Year of construction: 1995, Surface planer and thicknesser combination machine Manufacturer: Elektra-Beckum Model: HC 410 Year of manufacture: 1995 Working width: 410 mm Max. planing height: 230 mm Power: 5.5 kW Number of knives: 3 Knife type: Strip-type planing knives Feed rate: 7 m/min Bdjdpfoz Uxmzsx Andsi Surface table length: 1,700 mm Weight: approx. 300 kg Includes infeed/outfeed roller table.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Electric thickness table adjustment with fine adjustment Motor power 4 kW Planing width 510 mm Total length of the jointer table 2200 mm 4-knife planing cutterhead Cutterhead speed 4700 rpm Planing height 3 - 230 mm Bdodpfxezhuz Ao Andei Feed speeds 8 + 14 m/min Weight approx. 750 kg

Condition: good (used), Year of construction: 2002, For sale is a used Holzprofi circular saw and milling machine with a cutting length of 2500 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical specifications: - Cutting length 2500 mm - Cutting width 1200 mm - Cutting height 90 mm - 3 milling speeds - Height-adjustable + swiveling - Dust extraction port Ø 100/80 mm - 2 motors, each 4.4 kW / 6 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combination machine Reference: R-J047R Bdsdpfxsz Apgie Andji

Condition: like new (used), functionality: fully functional, spindle diameter 35mm 5 speeds from 3000 to 10,000 rpm motor power 5.5 kW Maggi feed system with 4 rollers and adjustable speed Bjdpfx Aszx U Nujndsdi indexing carriage with a graduated scale for angle adjustment table 120x730 cm 760 kg year of manufacture: 2001 DTR manual – YES CE marking – YES guard for mortising AIGNER table tops 4 feed speeds turret for adjusting milling depth option to purchase without the feed system external dimensions: 2550x1700x1660

Condition: used, functionality: fully functional, machine/vehicle number: 30242, mileage: 99,900 km, power: 338 kW (459.55 HP), first registration: 09/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6c, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Combination sweeper/vacuum truck with water recycling system ADR equipment, engine D2676LF52, front suspension parabolic 9.5t, rear suspension air, differential lock rear axle, trailing axle steerable and liftable, hill start assist, lane keeping assist (LGS IV), disc brakes, MAN BrakeMatic, emergency braking signal (ESS), emergency brake assist (EBA2), ABS, ASR, ESP, exhaust pipe raised on the right, tires: steering axle 385/65R22.5, drive axle 315/80R22.5, tires 385/65 R 22.5 - 315/80 R 22.5, fuel tank 400 liters - 60 liters AdBlue, length/width/height 9.550/2.550/3.800 Bedpfx Anez Hnf Asdjdi Cab: 2 seats, driver's comfort seat with air suspension, passenger seat static, central locking, cruise control, air conditioning, fine dust and pollen filter, tilting roof, speed limiter 90 km/h, TollCollect pre-equipment, digital tachograph Conti, MAN Tronic on-board computer, MAN Media Truck Advanced radio with Bluetooth and navigation, radio system, windshield, door windows and side windows tinted, electric door window lifts, sun visor, sun shield, mirrors heated and electrically adjustable, reversing camera, 2 rotating beacons on the cab roof Superstructure KROLL with water recycling: extension piston, 3-way adjustable piston with volume division water/sludge: approx. 3 m³ / 10 m³, 5 m³ / 8 m³, 7 m³ / 6 m³, filling level indicator in front of and behind the piston with internal float and external scale, hydraulically upward-opening full-size top cover with hammer head locking, lower suction connection, water treatment unit, all working functions fully automatically controlled via CAN-BUS technology (KROLL-CANMATIC), combined operation of suction and high-pressure flushing, variable water and sludge chamber, emptying by means of discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention, vacuum pump CVS water ring pump VacuStar WR 2500, suction capacity 2,500 m³/h with pneumatic pressure control valve, high-pressure pump URACA P 3-45 (approx. 348 l/min at 205 bar), hose reel cassette with simultaneous telescopic boom DN 125, large HD reel swiveling by 180° for 240 m DN 25, small HD reel for 60 m / DN 13, central control panel in stainless steel housing with louvre at the rear right, second control panel mounted on swiveling HD reel, remote control, discharge apron made of aluminum, closed hose box made of aluminum on the right, open hose box made of aluminum on the left, electric winch, rope pulley, vice, storage box, LED ambient lighting, LED work lights with 20 m cable and with approx. 15 m cable extension in drum, hand washing basin, ladder, fire extinguisher, reversing camera, rotating beacon at the rear.

Year of construction: 2008, condition: used, functionality: fully functional, This is a combination steamer, also known as a convection oven, manufactured by Convotherm, model OGS 20.20, in a gas-powered version, direct injection, without a boiler, manufactured in 2008. The unit is set for natural gas; it can be converted to propane gas. The combination steamer is functional; videos can be sent upon request. The combination steamer is equipped with a trolley for 20 x 2/1 GN or 40 x 1/1 GN pans and includes 2 x 1/1 GN insert racks. The unit is sold without inspection or warranty, as received from the customer. An inspection will certainly be necessary for recommissioning. Wiring diagrams and documentation are included. Only frozen, ready-made meals have been heated/regenerated in this combination steamer. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Insert slots: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Condition: Used, no inspection Additional information: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (image symbol) for quick selection of predefined cooking recipes Tray Timer (staggered loading) Start time pre-selection in real-time mode Night baking Delta-T baking (requires multi-point core temperature probe) Cook & Hold Programmable with 250 cooking recipes, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking recipes Disappearing door: more space and improved workplace safety Double-glazed door with integrated door stop Antibacterial door handle latch with ventilation position and safety function Door handle latch with closing function Motor brake when opening the cooking chamber door: less steam escaping Fan with autoreverse function Handheld spray with stepless adjustment Multi-point core temperature probe Bjdpfx Anoz Smhijdedi Height-adjustable device feet Easy operation via menus/icons Bright graphic display Digital rocker switch for easy adjustment of temperature, time and core temperature Modular processor control with clear display and module self-check RS232 interface Storage of all device settings and cooking recipes in an additional memory module Permanent self-diagnosis for fault detection System with full-text error description Safety program mode: operation of the device with limited functionality is possible Basic prison version Robust design in stainless steel Seamless welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic socket seal Cooking chamber lighting with shock-resistant glass cover Including loading trolley with condensate collection tray