Used Electrical Drawing for sale (31,141)

Condition: used, functionality: fully functional, Wire drawing machine COMPAC – model TR560 – 7 steps of drawing Raw material : low carbon hot rolled wire rod Input: from fi 5,5 mm output: 1,8 mm on the last step Speed: cca 15 m/s Diameter of blocks 560 mm (5 pcs with ceramics) Engine power - 41 KW Electronics: SANTERMO Knsdpjw Ephnsfx Aabsc matrix cassette No. 1 rotating on a chain, others fixed with water for cooling 2 cassettes for washing the wire +1 rotating cassette (spare) +1 block (reserve) Complete with two mandrels for unwinding. We have complete documentation for the machine. The machines are in good condition, we used them for production and dismantled them at the end of last year.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15914, PRESS RUNNER MACHINE TYPE: EPT63 YEAR BUILT: 1999 MACHINE NUMBER:15914 MACHINE DATA Pressing force: 630 KN Idle noise: 69.2 dB Knoderypfyspfx Aabjc Drive power: 22+4 KW Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil quantity: 285 liters. Weight: 6000kg TRAVEL DISTANCE MEASUREMENT: Overtravel: 20mm Follow-up time: 90ms Safety distance: 180mm DIMENSIONS: Installation height max: 600mm Ram stroke max: 400mm Throat: 280mm Table height: 850mm Table width: 630mm Table depth: 500mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, General Data Measurements width 1260 mm Measurements depth 6460 mm Measurements height 2100 mm Clamping Unit Clamping force 2200 kN Additional Equipment Sepro Robot SDR 22 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding Knjdowvwaaepfx Aaboc

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 diameter range: 8 mm drawing speed: 19 m/min Knedjwi S R Tjpfx Aabec mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse

Condition: good (used), functionality: fully functional, Chain drawing bench for sharpening and drawing metal wires. Was used in profile wire production. Motor power 1.5 KW. Drawing length approx. 2 meters. Total length of the machine 2.70 meters. The electrical wiring is quite old, but the machine works well. The machine is mechanically in good order and has even been partially overhauled. Knjdjry T E Uopfx Aabsc

Year of construction: 2009, condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Switch cabinet/electrical cabinet Manufacturer: Gilgen/Logistics Condition: used year of construction: 2008/2009 type: ICP 10 KA-IPK 17 KA order: 250623/250399 dimensions: approx. 450 mm wide approx. 660 mm high approx. 250 mm deep Stock: 2 pieces Price: per piece Gilgen Logistics switch cabinet Knodpfel Skarsx Aabsc

Condition: used, Year of construction: 1979, weight max. in kg 2000 kg tool adaptor Kugelkopf stroke height 200 mm battery 24 V / 240 Ah weight Batterie: 204 kg weight of the machine ca. 320 + 204 Kg dimensions of the machine ca. 1,1 x 1,2 x 1,4 m • Electric lift truck for roller carrier, • Battery, Manufacturer HAKER, type Perfect plus, YOC: 2009 Ksdpjtwbruofx Aabjnc • Charger, last UVV inspection: 01/2009,

Condition: as good as new (ex-display), Wood kiln fan motor VEM produced. Knedpfxeliib Ts Aaboc 5,5KW 1440rpm. Foot mounted. Price for one (1 pc.) motor. Totally 3 pc. on stock.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, General Data Measurements width 1460 mm Measurements depth 5370 mm Measurements height 2060 mm Kjdpfx Aaswvwagjbsnc Clamping Unit Clamping force 1600 kN Additional Equipment Sepro Robot SDR 11 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe Ksdpfx Ajwi S Ixsabjnc

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm Knsdpfx Aovxwhwoaboc column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Condition: used, Year of construction: 1979, weight max. in kg 2000 kg tool adaptor Kugelkopf stroke height 200 mm battery 24 V / 240 Ah weight Batterie: 204 kg weight of the machine ca. 320 + 204 Kg dimensions of the machine ca. 1,1 x 1,2 x 1,4 m • Electric lift truck for roller carrier, • Battery, • Manufacturer HAWKER, type Perfect Plus, no. 5225080001, Knsdpjtwbr Usfx Aabjc • Year of construction 2009, • Charger, • last UVV inspection: 01/2009

Condition: as good as new (ex-display), Balcancar el.rope hoist 1 tonn capacity. Was installed one time on the rail, but never used. Knodpfold S Nwex Aaboc

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 Ksdpowi Tidsfx Aabenc diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm Knjdpfsvxwm Tsx Aaboc ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38I/8834, Offer Number: M38I/8834 Machinetype: pre-drawing machine Make: TECNO IMPIANTI Type: SKP26 Knsdpfxowi Thge Aabsc Constr. year: 2003 diameter range: 26 mm drawing speed: 10 m/min diameter range - mild steel: 26 mm diameter range - high tensile: 24 mm capstan diameter: 1300 mm Location: Germany

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm Knodovxwmmopfx Aabjc table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: M38L/8943, Offer Number: M38L/8943 Machinetype: pre-drawing machine Info: only the draw drum Knedswi Tdzepfx Aabjc Make: RMG Type: 67 Constr. year: 2020 diameter range: 11 mm capstan diameter: 700 mm clear width: 150 (160) mm Location: In our warehouse

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm Kodpfx Aaevxwmgjbsnc table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled Kodpovxwh Dofx Aabsnc die-cushion inside the table hydraulic, controlled

Condition: used, Year of construction: 1973, pressure 1000 t Knjdpfx Aajvxwhqsboc distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic Knsdpfovxwhksx Aabec weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm Ksdjvxwg Tspfx Aabenc die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t Kjdpfx Aovxwg Heabonc stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005 Knedpfx Aaovxwgyoboc