Used Electromagnetic for sale (328)

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Ksdjx Ndu Depfx Adwjll Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, Perfectly working grinding machine "станка 3Л722" Basic parameters Accuracy class A Maximum workpiece dimensions (length x width x height) 1250 x 400 x 400 Maximum dimensions on electromagnet 1250 x 400 x 280 Minimum dimensions on electromagnet 50 x 40 x 3 Distance from the spindle axis to the table mirror mm 210..625 Maximum product weight kg 600 Maximum weight on electromagnet 400 Machine work table Dimensions of table work surface (length x width) 1000 x 400 Table feed speed 3..35 Grinding head Dimensions of grinding wheel ПП450х80х203 Grinding wheel speed/min 1460 Maximum grinding speed m/s 34.4 Maximum diametrical feed, mm 430 Accelerated transverse disc feed m/min 1,2 Automatic cross feed for each table feed mm/rev 1..60 Kodpjqwzt Nofx Adwsll Maximum vertical disc feed, mm 415 ?? 0,002 ?? 0,2 Automatic vertical disc advance, mm 0,002..0,128 Vertical accelerated advance speed, m/min 0,2 Electrical equipment Number of motors 13 Disc spindle motor power, kW 11 Hydrostatic pump motor power 4 Hydrostation air heat exchanger motor power 0,09 Lubrication system pump power 0,25 If you have any further questions, we will be happy to answer them.

Year of construction: 2017, condition: excellent (used), Plant description Steel base plates as the basis of the plant and for positioning the lifting systems and shakers Electric or electro-hydraulic lifting system for vehicle positioning 2 High Power Shakers with electromagnetic fixation and docking system up to 3,5 tons Control cabinet with shaker control PC system for control and evaluation Klsdpfx Asifkhaedwel With component test bench!!

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. - Mobile and compact setup - Standard with vacuum system 2.2 kW - Optional with 2 or 4 electromagnets - Equipped with 2 grinding heads - Bracket with double hand control (CE marking) Klsdpfx Asixz Hdedwjl - Workpiece width: max. 780 mm / length unlimited - Power consumption of machine: 400 V, 50 Hz, 10 A, 6 kW - Dimensions: 1435 x 1100 x 1510 mm (L x W x H)

Condition: excellent (used), Year of construction: 1999, Geibel & Hotz FS 60 Compact Surface Grinding Machine Geibel & Hotz FS 60 Compact, Year of Manufacture 1999, Excellent CONDITION The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Surface Grinding Machine GEIBEL & HOTZ Type FS 60 AC Year of manufacture: 1999 Electromagnetic chuck: 600 x 400 mm Table clamping area: 960/620 x 400 mm Max. longitudinal table movement: 660 mm Grinding width: 400 mm Max. cross movement with cross feed: 400 mm Max. cross movement with manual adjustment: 425 mm Max. distance spindle center to magnet plate: 425 mm Table speed: 2 - 28 m/min, infinitely variable Grinding wheel dimensions: Ø 300 x 50 x 76 mm Manual vertical feed: 1 graduation = 0.002 mm Manual cross feed: 1 graduation = 0.01 mm Power supply: 400 Volt, 50 Hz - Electromagnetic chuck GEIBEL & HOTZ, Type HPM 600 x 400, installation height 99 mm - Automatic depth feed for surface and plunge grinding with actual value digital display - Setting of depth increment via decade switch Kodpox H Nn Defx Adwsll - Cross feed for surface grinding driven by motor or manually via handwheel - Hydraulic longitudinal table movement - Central lubrication for longitudinal table movement, Y+Z axis movements and lead screws - Mounted grinding wheel Ø 300 mm (actual Ø 290 mm) - Electrical control cabinet adjacent - Hydraulic unit integrated in machine base - Coolant device with paper band filter Required space (L x W x H): 2850 x 2250 x 2500 mm Weight approx. 2 tons (complete) Very good condition About the machine: Offered here is a Geibel & Hotz FS 60 Compact surface grinding machine. This universal surface grinder is in very good original condition. It comes from a facility where it was only occasionally used in the technical center for sample grinding. Very user-friendly controls. A grinding travel of 600 mm in the longitudinal axis and a cross travel of 400 mm makes it ideal for toolmaking, jig manufacture, and small-batch production. The comprehensive standard equipment and user-friendly handling distinguish this machine series. The robust spindle head design and dual V-guideway construction for the longitudinal and cross axes guarantee lasting precision. The intuitive operation of the controls simplifies use and significantly increases productivity. The guideways are lubricated regularly through the central lubrication system. The Geibel & Hotz was mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Geibel & Hotz under power on our premises. Further surface grinding machines from renowned manufacturers can be found on our website.

Year of construction: 2023, condition: new, Attachment suited for: Hoisting equipment Kodpfx Asph Rk Tjdwjll Selling price: € 15.500, US$ 16.480 A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us

Year of construction: 2023, condition: new, A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us Kjdpfophnygox Adwjll

Condition: used, Year of construction: 2005, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, workpiece weight (max.): 470 kg, table load: 700 kg, spindle speed (max.): 1,500 rpm, overall weight: 4,900 kg, grinding spindle motor power: 7,500 W, disc diameter: 355 mm, space requirement height: 2,100 mm, space requirement length: 4,220 mm, space requirement width: 2,500 mm, Equipment: rotational speed infinitely variable, Used Okamoto surface grinding machine for sale Control: Fanuc type 21GA Stepless speed control Dressing incl. compensation Electromagnet The machine is used and fully functional. Kljdpfxjx H Acuj Adwjl The hydraulic unit should be overhauled.

Condition: new, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Our entire vehicle inventory, including vehicles available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (test load approx. 50 t) Tyres: * Tyres 235/75 R 17.5 3PMSF TPMS: * TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the towing vehicle is via the standardized EBS interface in line with ISO 11992. For correct display, the towing vehicle must be able to receive and display this data. Axles: BPW axles and suspension, 2 rigid axles, 1 steered trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock actuated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tool kit Brake system: * Brake system complies with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Entire steel structure automatically blast-cleaned with turbine blasting after welding * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final painting with two coats of 2K topcoat, single color in RAL 3002 Carmine Red according to the RAL 841GL system * Rims in silver grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting Ksdpox H Hi Eofx Adwjll * ASPÖCK UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connector according to ISO. 24N ISO 1185, 24S ISO 3731 * 15-pin ISO 12098 Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * Mount at the rear of the gooseneck for aluminium loading ramps * Galvanized folding support legs under the platform bevel * On the gooseneck and rear panel, left and right, each with a holder for warning signs including socket * Axle load gauge including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the load area for a 20' (30') or 40' container * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the out

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Kodpfxeb Dxnwj Adwoll Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,000 mm, total width: 2,100 mm, power: 3 kW (4.08 HP), compressed air connection: 6.5 bar, volume flow: 6 m³/h, Open spray stand 2x2.1x2.2 The overspray during powdering is collected via the suction unit. The powder spray stand is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. 1 Dimensions of the powder stand Width 2,000 mm Depth 2,100 mm Kedpfsfhv Tqsx Adwell Height 2,200 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter

Condition: new, Year of construction: 2025, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. powder coating booth, open spray booth The overspray during powder coating is collected by the suction unit. The powder spray booth is supplied on castors and is therefore mobile. - The extraction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. 1 Dimensions of the powder level Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 2. powder combustion furnace 1 Internal dimension length 4,000 mm 2 Inner dimension width 1,500 mm 3 Internal height 2,200 mm 4 External dimension incl. thermoblock length 5,250 mm 5 External dimension incl. thermoblock width 2,050 mm 6 External dimension incl. thermoblock height 2,530/2,750 mm 3. switch cabinet Kjdpfx Adoffwfxewoll 4 Manual conveyor system The "Mantion system" conveyor technology is designed for max. 250 kg per product carrier and 750 kg/ trolley.

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: gasoline, operation weight: 350 kg, Year of construction: 2015, operating hours: 427 h, Equipment: all wheel drive, cable winch, Dvorak SPIDER ILD-02 Radio remote controlled Large area mower / embankment mower Technical information according to manufacturer: Ksdpfstzczdox Adwjll Spider large area and embankment mower Areas of application The remote-controlled SPIDER ILD was designed for the maintenance of uneven and rough terrain, with inclines of up to 40° degrees (up to 55° degrees with the optional cable winch). The mower not only copes well with rough ground, wild growth and unkempt lawns, but also with well-kept parks. It is invaluable, especially when maintaining ditches around roads, for cutting grass in orchards and forest nurseries, landfills, areas around power stations, airports or mountain hotels, ski slopes and parks and military areas. It can also be used in agriculture and is often used for mowing golf courses and other sports facilities. The unique drive system makes it very suitable for maintaining the surrounding terrain of reservoirs, rivers and dams. The machine's exceptional environmental friendliness is due to its low weight and soil-friendly drive system. The 4-wheel drive allows the mower to be used in wetlands and protected nature reserves. Mowing system Mulching system Control system Radio remote control Cutting width 123 cm Cutting height adjustable from 90 - 140 mm Cutting system 4 cutter bars with 8 blades Area output Ø 3,500 m²/h | max. 7,000 m²/h Engine Kawasaki FS 691V | 2 cylinders Engine output 17.6 kW | 24 hp | 726 cc Transmission Hydrostatic transmission 0 - 8 km/h Hour meter Yes Electromagnetic mower clutch with brake Drive 4-wheel drive Steering 4-wheel steering Wheels endlessly rotatable through 360 Tires 16 x 6.50 | V-profile Tank capacity / consumption 16 liters / 3 - 3.8 l/h Weight 335 kg Dimensions 1640 x 1430 x 920 mm This SPIDER ILD02 with cable winch was first commissioned in 2015, has 427 operating hours according to the meter and is in a well-kept overall condition with the usual signs of use and wear and tear of this equipment class, customer service freshly carried out, ready for immediate use! - Net price 16.722,-€ / Gross price 19.900,-€ - Viewing / test drive possible - Shipping costs nationwide (except islands) 400,-€ - Our leasing partner will be happy to provide you with an attractive leasing / financing offer!

Condition: good (used), Year of construction: 2001, • Sanding width (mm): 1100 • Workpiece thickness (mm): 3 - 150 • Total sanding units: 1 • Longitudinal belt: 1 • Calibration roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding Kedeww Iatspfx Adwsll • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 11 m/min. • Sanding belt length (longitudinal unit) (mm): 1,900 x 1,120 • Pressure beam: CSD system, electromagnetic, wear-free • Availability: checked, in stock

Condition: good (used), Year of construction: 2000, • Sanding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total sanding units: 2 Klsdswwlm Dspfx Adwjl • Longitudinal belt: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 12 m/min • Sanding belt length, longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: inspected, in stock

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 297 mm bore stroke 120 mm speeds 8 / 75 - 1600 U/min table-size 500 x 460 mm spindle taper MK 4 column diameter 115 mm spindle feeds: 3 / 0,1 - 0,26 mm/U distance spindle /table 715 mm Ksdpfx Aoxuv I Rsdwjll distance spindle/base plate 1180 mm engine output 1,5 kW table rotating 360 Grad weight of the machine ca. 335 kg dimensions of the machine ca. 0,5 x 0,76 x 1,89 m Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. The machine has minor transport damage, see picture no. 6. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Kljdpfx Ajxw Uqvjdwsl Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: new, Year of construction: 2022, planing width: 800 mm, Electric table lift, two motor speeds 1/6 mm/s Kedpfx Aoittnpodwjll Automatic table positioning to the specified position Feed table – length 1200 mm 1x grooved roller at the infeed 2x feed rollers at the outfeed Automatic star/delta motor starting Electromagnetic brake Electronically controlled, continuously variable feed belt speed 4 – 19 m/min 4-knife planer cutterhead  150 mm Segmented pressure shoes at the infeed, pressure bar at the outfeed 4-point table mounting Workpiece thickness 3 - 300 mm Extraction nozzle with outlet  180 mm Knife setting gauge Noise protection Standard PE film packaging Machine built to CE power and safety standards Additional equipment: 20 HP motor (15kW) Segmented grooved feed roller Two table relief rollers Two rubber-coated outfeed feed rollers Milling cutterhead type “Tersa” - Available from stock in Haldensleben

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Kledpfx Adsxuwanowel Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1735072, grinding length: 600 mm, grinding width: 300 mm, total height: 1,800 mm, total length: 2,630 mm, total width: 1,550 mm, distance table to spindle center: 500 mm, table load: 300 kg, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 1,750 kg, power: 3.75 kW (5.10 HP), input voltage: 400 V, disc diameter: 355 mm, Exhibition machine for sale – top condition - Designed for precision surface grinding tasks in industrial applications - Maximum rigidity and stability thanks to stress-relieved annealed and hardened cast iron construction Kodpfexpvxrox Adwjll - High-quality spindle with precision tapered roller bearings (runout accuracy 2 µm) - Electromagnetic chuck for securing workpieces, including automatic demagnetization function - Automatic central lubrication system for all guideways and spindles - Hand-scraped and Turcite-B-coated V-flat guideways ensure extremely smooth, low-friction movement and highest precision - Halogen work lamp: dustproof, fully touch-protected, and protected against water jets according to IP65 - A second grinding wheel flange is included in the delivery AD 5 automatic feed control The FSM series models are equipped with an automatic feed control (AD 5). Various grinding cycles are available: surface grinding with infeed at the starting point, slot grinding with infeed at the starting point, and slot grinding with infeed at both the start and end points. The infeed of the grinding wheel can be individually configured depending on the workpiece. The total grinding dimension is divided into rough and fine infeed steps, which can be freely programmed with a minimum increment of up to 0.001 mm, depending on the application. The system also allows dwell times after a defined number of infeed steps and spark-out passes after reaching the grinding dimension, ensuring optimal grinding results.

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) Kljdjw Tpqwepfx Adwol One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: new, Bernardo Gear-Driven Pillar Drilling Machine GB 32 S Vario Technical Specifications • Drilling capacity max.: 32 mm • Tapping capacity max.: M22 • Drill chuck: 1 – 13 mm / B16 • Morse taper: MK 4 • Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm • Feed range: 0.06 / 0.12 / 0.18 mm/rev • Throat depth: 300 mm • Max. spindle to table distance: 670 mm • Spindle to base plate distance: 1285 mm • Quill stroke: 160 mm • Column diameter: 125 mm • Table size / T-slot size: 460 x 460 mm / 14 mm • Base working area: 420 x 340 mm • Motor output (S1 100%): 1.5 kW / 400 V • Motor input (S6 40%): 2.2 kW / 400 V • Machine dimensions (W x D x H): 540 x 900 x 2120 mm • Weight: approx. 360 kg Features • Infinitely variable speed control, ideal for adjusting the desired cutting speed • Machined base (420 x 340 mm) with integrated coolant pump • Integrated digital display for speed and drilling depth • Heavy-duty cast iron table with rotatable and tiltable work surface • Supplied as standard with 3 automatic spindle feeds • Guaranteed concentricity ≤ 0.02 mm measured in the quill • User-friendly membrane keypad operation • Standard with automatic quill feed and tapping device • Robust, ground steel column designed for heavy-duty use Scope of Delivery • Gear-driven drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 • Reducing sleeves MK 4 / 3, MK 3 / 2 • Delta VFD frequency converter • Automatic tool ejector • Coolant system • Electromagnetic spindle feed Kledpfex Agiuex Adwel • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Condition: excellent (used), Electromagnetic clamping plate (28490) Length 500 mm width 250 mm height 75 mm Voltage 90 Volt 0.4 Ampere Klodpotrngpefx Adwsl Weight 58 kg

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, power: 0.75 kW (1.02 HP), Powerful high-lift truck in top condition for sale! The unit is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 15h Year of manufacture: 2025 SCHORR electric pallet stacker with a load capacity of 1200 kg -- Various lifting height options available (2500 mm, 3600 mm) -- Fully electric and self-propelled with various driving modes -- Affordable alternative to purchasing a forklift -- Low-maintenance, smooth-running, and easy to operate -- 24 V 80 Ah AGM batteries (maintenance-free) -- Integrated charger for convenient charging -- High-quality CURTIS control system (waterproof) -- Secure stability thanks to electromagnetic brakes -- Stable chassis and robust metal cover guarantee high stability -- High-performance hydraulic pump Prices depending on lifting height / variant: -- 2500 mm lifting height: Upon request -- 3600 mm lifting height: Upon request The SCHORR electric pallet stacker has a load capacity of 1200 kg and reaches a lifting height of up to 2500 mm or 3600 mm (depending on the selected variant). Thanks to its robust construction, stable chassis, and sturdy metal cover, the device ensures high stability and durability. The centrally located control instruments, such as the battery charge indicator, emergency switch, and key, are easily accessible and in the operator's direct field of vision. With its small turning radius, the pallet stacker is extremely maneuverable and allows you to maneuver effortlessly even in the tightest spaces. An integrated 24 V/10 A charger allows you to easily charge the electric pallet stacker. The pallet stacker also features a maintenance-free 24 V/80 Ah AGM battery. You can simply plug and charge the device into a conventional 230 V outlet. In addition to the normal transport speed of approximately 4.2 km/h, there is a "Turtle" or "Crawl" mode. This function allows you to reduce the travel speed and perform precise maneuvers, for example, when transporting delicate goods. With its safe design and integrated steel reach-through guard, it offers you and your employees optimal protection during operation. Thanks to its electromagnetic brakes, it ensures secure footing and thus maximum stability during your transport tasks. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR12HHE3 Load capacity: 1.2 t Model: 250E // 360E Weight including batteries: 455 kg // 489 kg Klodpfx Adjwh N T Aewel Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 1706 mm Overall width: 925 mm Length including fork face: 556 mm Lift: 2500 mm // 3600 mm Mast retracted height: 1820 mm // 2370 mm Mast extended height: 3035 mm // 4130 mm Fork dimensions DIN ISO 2331: 60 mm x 170 mm x 1150 mm Fork spacing: 570 mm Aisle width with pallet: 800x1200 lengthwise 2180mm Turning radius: 1415mm Speed Travel speed with/without load: 4.0km/h / 4.5km/h Lifting speed with/without load: 0.10m/s / 0.15m/s Lowering speed with/without load: 0.12m/s / 0.10m/s Max. gradeability with/without load: 3% / 10% We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: new, Year of construction: 2024, load capacity: 1,200 kg, power: 0.75 kW (1.02 HP), SCHORR electric pallet truck 1200 kg load capacity 3.6 m lifting height -- Fully electric & self-propelled with various driving modes -- Inexpensive alternative to purchasing a forklift truck -- Low-maintenance, smooth-running and easy to operate -- 24 V 80 Ah AGM batteries (maintenance-free) -- Integrated charger for convenient charging -- High-quality CURTIS control unit (waterproof) -- Safe stand thanks to electromagnetic brakes -- Sturdy chassis and robust metal cover guarantee high stability -- High-performance hydraulic pump The SCHORR electric pallet truck 3600mm has a load capacity of 1200kg and reaches a lifting height of up to 3600mm. Thanks to the robust design, the stable chassis and the robust metal cover, the device guarantees high stability and durability. The pallet truck has a waterproof CURTIS control system. The centrally located control instruments such as the battery charge indicator, the emergency switch and the key are easily accessible and are in the operator's direct field of vision. With its small turning radius, the pallet stacker is extremely maneuverable and allows you to maneuver effortlessly even in the tightest of spaces. An integrated 24 V/10 A charger allows you to charge the electric pallet truck easily. The pallet truck also has a maintenance-free 24 V/80 Ah AGM battery. You can simply connect the device to a conventional 230 V socket and charge it. In addition to the normal transport speed of approx. 4.2 km/h, there is also a "turtle" or "creep mode". This function allows you to reduce the driving speed and perform precise maneuvers when transporting sensitive goods, for example. Kledpfxjqwc Eie Adwol With its safe design and integrated steel reach-through protection, it offers you and your employees optimum protection during operation. Thanks to its electromagnetic brakes, it ensures a secure footing and therefore maximum stability for your transportation tasks. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR12HHE3 Load capacity: 1.2t Model: 360E Tare weight incl. batteries: 489kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 1706mm Overall width: 925mm Length including fork crown: 556mm Lift: 3600mm Height mast retracted: 2370mm Height mast extended: 4130mm Fork dimensions DIN ISO 2331: 60mm x 170mm x 1150mm Fork outer spacing: 570mm Aisle width with pallet: 800 x 1200 lengthwise 2180mm Turning radius: 1415mm Turning speed Travel speed with/without load: 4.0km/h / 4.5km/h Lifting speed with/without load: 0.10m/s / 0.15 m/s Lowering speed with/without load: 0.12 m/s / 0.10 m/s Max. Gradeability with/without load: 3% / 10% Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our forklift trucks. You can reach our competent team by phone or e-mail. We look forward to hearing from you and being able to help you with advice.