Electromagnetic clutch for Czech machine

PSP POHONY ELS-16, ELS-25, ELS-63

Condition: new, Year of construction: 2025, saw band length: 3,920 mm, saw band width: 34 mm, Double column bandsaw fully automatic Everising H-260 HB Cutting range round: 0 - 260mm Cutting range square: 300 x 260mm Bundle tension: Width: 145 - 190mm Bundle tension height: 30 - 130mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1mm Weight: 1759 KG Machine dimensions: 2170 x 2100mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device Iaedpfxoq Ulxyo Adwsl - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: new, Year of construction: 2023, saw band length: 5,450 mm, saw band width: 41 mm, Double column bandsaw fully automatic Everising H-460 HB Cutting range round: 0 - 460mm Cutting range square: 460 x 460mm Bundle tension: Width: 195 - 310mm Bundle tension height: 120 - 230mm Drive power: 5.5 kW Saw blade dimensions: 5450 x 41 x 1.3mm Weight: 3030 KG Machine dimensions: 2820 x 2190mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Iaedpfjq Ulxgsx Adwsl Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Year of construction: 2007, condition: good (used), Technical data shown i pdf file in attachment. Parts shown by hand not come. Chucks on the table are not included. Isdpfsmnp D Iox Adwsal Machine vices not come.

Condition: new, Year of construction: 2023, HS-440HL CNC lathe TECHNICAL DATA: - FANUC 0i-TF Plus control (5) - spindle servo motor: FANUC 11/15 kW - X-/Z-axis servo motors: FANUC 1.6 kW - max. workpiece/turning diameter fi 450 mm / fi 300 mm Ijdpfjiwtk Njx Adwjal - max. turning length 450 mm - X/Z-axis travel: 165 mm / 500 mm - working strokes 5 m/min; high-speed strokes 30 m/min - spindle speed 45-4500 rpm - Spindle bore / bar diameter: 62 mm / 52 mm - hydraulic turning head fi 200 mm - 12-position hydraulic tool turret - MK4 hydraulic tailstock / tailstock pin travel 130 mm - linear ball guides in all axes - machine dimensions (w x d x h) 3950 x 1552 x 1825 - machine weight 4500 kg STANDARD EQUIPMENT - fully protected working area with cab - 12-place hydraulic tool magazine - 4 hole holders - 8 sets of lathe knife holders - MK4 swivel tip - chip conveyor (belt) with container - automatic lubrication system - Cooling system with reservoir and pumps - heat exchanger electrical box - transformer - tool cassette for basic machine operation - levelling screws and shims (6 sets) - LED signal/work light

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, Iaodpfx Ajridf Uodwol 16-position tool changer, SK 50 tool holder, Spindle speed up to 4,000 rpm, Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system,

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available. Iaedpfotyymcox Adwsl

Condition: excellent (used), 3 phase brushless servo motor Manufacturer: SIEMENS Type: 1FT6105-1AC71-4AH1 Numbers: YF P7204929 01 YF R021977803 YF R122124201 Diameter clutch: 80 mm Speed normal: 2.000 rpm Speed max.: 3.000 rpm Hole spacing flange: Coupling: Rotex GS 38/45 KTR Iodpfx Aef Umuaodwoal Manufacturer: Kupplungssystemtechnik Rheina Dimensions: 520 x 250 x 190 mm Weight: 43 kg Three motors are available. Motors are from a CNC BAZ Hurko EX20. Price per piece, single sale possible.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, hard -Jaw width: 50 mm -Grid: 1/16 Iedpjr R Aa Isfx Adwoal -Dimensions: see photo technical drawing -Dimensions total: 110/150/H55 mm -Total weight: 3.5 kg