Used Electrostatic for sale (110)

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) Cjdpfx Agjya Dz Rjksgp x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Cgedpoya Az Nofx Agkep Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: used, Year of construction: 2013, The machine was completely rebuilt by the manufacturer in 2013, including retrofitting of a new HMC 600 control system. Description: Suitable for regrinding and manufacturing new wooden and metalworking tools of all kinds. Accessories: Software Package 1 (cylindrical tools sharp-edged, corner and full radius), Software Package 2 (conical-spiral tools sharp-edged, corner and full radius), Software Package 3 (drills and step drills), Software Package 4 (step tools) Software Package 6 (woodworking tools), Software Package 16 (warming-up program), Software Package 27 (free programming), Heli-Flute & Cone (flute calculation program for cylindrical and conical mills), stepless speed control, pneumatic workpiece clamping, Probe, automatic fire protection system, electrostatic extraction, oil collection tray, automatic central lubrication, X axis longitudinal movement: 400 mm Y - axis vertical movement: 250 mm Z-axis cross movement: 580 mm C-axis rotary table: Swivel range +/- 200 ° Workpiece holder: ISO 50 max. workpiece length: 270 mm max. grinding wheel diameter: 200 mm, Max. Workpiece diameter: 260 mm Grinding spindle speed infinitely variable: 0 - 9500 rpm. weight: approx. 3200 kg Drive power grinding spindle: 10,0 kW Connected load: 15 kVA (400 V / 50 Hz) Cedpfxox H Nqlj Agkogp Dimensions W x D x H: 2000 x 2010 x 2150 mm colour: grey RAL 7035/7043

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment Csdpsx D Hwnofx Agkogp • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: used, functionality: fully functional, type of input current: AC, input voltage: 220 V, Equipment: lighting, For sale: a corona roller separator from hamos, Model: KWS 1010-1 - Year of manufacture: approx. 1998 - Approx. 500 operating hours - Used exclusively for trials and testing, never integrated into a production facility; thus, very little wear - Technically fully functional Application areas - Electrostatic separation - Plastics and recycling applications - Material testing, production Special features - Robust industrial construction - Standalone machine with controller - Ideal for laboratories, development departments, or pilot plants Sale as inspected Cgsdpoyhcqyefx Agkjp Inspection by appointment possible

Condition: excellent (used), Year of construction: 2007, For sale is a complete, containerized heating plant from the renowned manufacturer Kohlbach, with an output of 1500 kW. The system was in operation until recently and is in excellent technical condition. As part of a comprehensive overhaul, a completely new combustion chamber lining was installed and the air supply systems were renewed. Cedpfjyha Szjx Agksgp Technical specifications: - Containerized design (no separate building required) - 19 m high chimney stack - Electrostatic precipitator for fine dust separation - Wood chip storage with moving floor - Hydraulic stoker for automatic fuel feeding - Complete piping system with central heating pumps Fuels: Suitable for various types of biomass such as bark, wood chips, and sawdust—ideal for efficient and environmentally friendly operation. Key benefits at a glance: - Ready for immediate operation - No building permit required (mobile) - TÜV certificate (Germany, valid, issued 2023) - Very good overall condition Price on request – please contact us for more information or to arrange an on-site inspection.

Condition: good (used), Year of construction: 2012, Exhaust gas filter system, exhaust gas filter system, exhaust filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, particulate filter, industrial filter -Manufacturer: ifs, exhaust air purification system industrial filter type IF-Vario M 1600 -Nominal power: 0.75 kW -Suction power: 1600 m³/h Codpfx Agswrcbnskjgp -Individual components: see photos -Dimensions: 990/600/H660 mm -Total weight: 100 kg

Condition: used, Year of construction: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control Heidenhain TNC 640 swivelling range -98 bis 98 Grad rotary table dia. 750 mm total power requirement 29 kW weight of the machine ca. 16 t Hedelius traveling column machining center Tiltenta 7 Magnum Cjdpfx Agswfqqkekjgp with continuously swiveling main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-fold tool magazine and NC rotary table integrated into the fixed machine table. Machine equipment: T7M-3200, operating mode 3 -Pressure booster pump 50 bar -Heidenhain TNC 640-T series -Spindle speed 12000 rpm/29.0 kW -Extended swivel range TNC/T -HR 510 handheld control unit -SK40/190 standby magazine -Cone cleaning station -900 l slant bed coolant system -25 bar internal coolant supply -Slant bed coolant system prefilter -Electrostatic exhaust air filters T / 2x1300 -Compressed air nozzle on spindle head -Internal compressed air supply -Blow-off guns -Rinsing guns -Infrared receiver M&H 91.40 -3D infrared measuring probe M & H 25.50 -Toolsetter M&H 35.70 -Workspace partition T7 with slider Control on: 33163:56:22 Machine on: 24185:07:21 Program run: 16784:12:57 Spindle: 11751.13.08

Condition: excellent (used), Year of construction: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Short bar loader Spinner Servo-Load 80-1500V2 with support stand Control: Fanuc 32iTB with color LCD display/control panel 1 Drive motors for X/Z axes and spindle manufactured by GE Fanuc with digital AC technology, traversing paths X = 200 mm, Z = 515 mm. Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6=40%). Main spindle as integrated motor spindle with water cooling, spindle nose A6. Cedpfx Aewwucuogkjgp C-axis for spindle including software option 'Transmit' for face machining and 'cylindrical interpolation' for peripheral machining. Hydraulic hollow chuck cylinder. 12-position indexing turret for tool holders in accordance with DIN 69880/30 mm, 12 driven tool stations with turret for milling and drilling operations. Tailstock for TC400, MK4. Chip conveyor TC400 with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump, 50 l/min, 3.3 bar. Parts catcher, tool setter arm, high-pressure pump, electrostatic air cleaner.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,150 h, functionality: fully functional, machine/vehicle number: 30017409, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, workpiece weight (max.): 600 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Simultaneous Milling Machine Hedelius RS80 S with Heidenhain I TNC 530 Operating Hours Program Run: 25,130 hours (still in operation) Spindle: 300 hours Speed Range: 30 – 8,000 rpm Power (approx.): 25 kW Torque (approx.): 244 Nm Internal Coolant Supply (IKZ): 25–70 bar Tool Holder: SK 40 DIN 69871 AD Tool Magazine: 30+190 additional stations Encapsulated Heidenhain Linear Measuring System: Direct in X/Y/Z/A/C Travel Range (XYZ): 800 / 800 / 600 mm Rapid Traverse X/Y/Z: 40 m/min NC-Swivel Rotary Table: A-axis: +95° / -95° C-axis: 360° Clamping Surface: ø800 x 630 mm Table Load (max.): 600 kg Equipment/Accessories: Chip conveyor Slant-bed coolant system SKM 1250 L High-pressure coolant pump IKZ 70 bar Rinsing pistols Hydraulic clamping/release on the table via M command, 2 units Workpiece touch probe: Infrared probe M&H Blum laser tool measurement and system for diameter and length Cgsdpfjwl Dy Esx Agkjp Full enclosure work area hood with shutter 2 electrostatic air filters LTA type AC 1000 Internal cleaning system Automatic door interface for automation Setup mode: Electronic handwheel Heidenhain 410 Under power for inspection

Condition: used, power: 0.5 kW (0.68 HP), input voltage: 380 V, type of input current: three-phase, suction capacity: 1,250 m³/h, operating temperature: 50 °C, negative pressure: 200 Pa, Electrostatic oil mist exhauster. Cedpfsx Tzlusx Agkogp

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun Cgodpfow U T Atox Agkjp -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Condition: good (used), Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 Cgsdjlb Iv Eopfx Agkjp -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg

Condition: excellent (used), Electrician's workbench ESD workplace -Dimensions: 1500/750/780 mm Cgjdpfx Aeb A Hk Uogkep -Conductive tabletop with Anka-Plast coating -for workplaces where electrostatically sensitive components and assemblies are processed. -Leakage resistance: according to DIN 51953

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. Cgsdpfx Agoxz Ab Rjkjp B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Year of construction: 2023, condition: new, The cable granulator is widely used in copper scrap recycling to separate copper and plastic. The processing capacity is 100-150 kg/h. It can be crushed and separated without classification. It is the best choice for recycling copper scrap. Application V-S10 wire granulator machine is mainly used for processing copper and aluminum wires such as household wires, industrial wires, automobile wires and so on. Design and manufacture 99.99% excellent efficiency and reliability equipment, such as: Copper rice mill, air gravity sorting, electrostatic separation, pre-shredding, vibration screen, magnetic separation conveyor belt, self-cleaning dust separation. Technical Specifications Model V-S10 Power 17.8kw Range 0.1~30mm Cgjdpfx Agjpm E U Rokep Weight 900kg Mea 1550*1500*2100mm Process capacity 100~150kg/h

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station - micro-notching station Csdpfjvg Ad Tex Agksgp - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm Cjdpsxmirgofx Agkegp - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: IMBDS63-52-10-45-2/SP/DC/SB, workpiece weight (max.): 120 kg, working height: 2,850 mm, power: 35 kW (47.59 HP), air demand: 24,000 m³/h, compressed air connection: 6 bar, The existing window coating line was in full operation until December 19, 2025. The system is currently still connected to the electrical supply network but will be replaced by a new robotic coating system over the turn of the year. The objective is to find a suitable subsequent user who will professionally dismantle and remove the complete system on their own responsibility at the beginning of the coming year. Csdpjx Npzcjfx Agksgp System Concept Description Loading and unloading of traverses with window frames and sashes takes place via a lifting/lowering station, which allows for ergonomic and process-safe feeding of the system. Impregnation and priming of the workpieces is carried out in a vertical flooding booth. The coating application is performed using the flooding process via vertically arranged coating nozzles. This is followed by a drip-off and drying zone, where the traverses are guided in an inclined position. The first drying tunnel has a buffer capacity of approx. 40 traverses. Drying is achieved by means of warm air generated from a hot water system with a supply temperature of approx. 85°C. A switching unit enables workpieces to be routed either to a second impregnation/priming stage or directly to the subsequent coating section, as required. The coating section consists of a lifting stand with integrated electrostatic application (E-Statik). Coating is performed on one side only, supplemented by an automated turning unit, allowing workpieces to be returned to the spray system for a repeat coating pass. The second drying tunnel enables buffering of approx. 50 traverses. Here as well, drying is by warm air supplied by a hot water system at approx. 85°C. A buffer section after the second drying tunnel with a capacity of about 25 traverses serves as a transfer area to the unloading station.

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Cjdpfx Agomcw S Sjksgp Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, overall weight: 900 kg, power: 5.75 kW (7.82 HP), input voltage: 220 V, Equipment: documentation/manual, emergency stop, type plate available, We are offering for sale the NJP-800 capsule machine (specifically for size 00 capsules). Cgodpox Ngd Ujfx Agksp The machine is fully functional, basically unused. Reason for sale - we designed the machine to encapsulate our raw materials (Very fine powder like matcha), but we found that due to its specific viscosity and electrostatic properties, it is unfortunately not compatible with the given type of machine, only after purchasing and putting the machine into operation. Thus, the machine is basically brand new and only a few times during several attempts to operate with our raw material, the user interface of the machine is in English.

Condition: used, Year of construction: 2020, operating hours: 4,042 h, functionality: fully functional, machine/vehicle number: W20-1123-01, We offer this used Hamos DM43310 electrostatic sorting machine, year of manufacture 2020. If you have any questions or need more information, feel free to send us a message or give us a call. Cjdpox S Ngwefx Agkegp

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 32 kg, total width: 490 mm, total length: 575 mm, total height: 880 mm, warranty duration: 24 months, We offer for sale a Universal Vacuum Cleaner Karcher NT 65/2 Tact2 Condition of the machine – Perfect, brand new unit Year of manufacture – 2024 Vacuum cleaner with TACT² system. Designed for removal of hazardous class M dust. Meets the highest European safety standards. Technical Specifications - Power supply parameters: 1 / 220–240 / 50–60 Ph / V / Hz - Airflow: 2 x 74 l/s - Vacuum: 254 / 25.4 mbar / kPa - Container capacity: 65 l - Container material: Plastic - Max rated power: 2760 W - Nominal diameter: ID 40 - Power cable length: 10 m - Sound pressure level: 73 dB(A) - Colour: anthracite - Weight without accessories: 24.5 kg - Weight with packaging: 31.332 kg - Dimensions (L x W x H): 575 x 490 x 880 mm Scope of Delivery - Drain hose (oil-resistant) - Automatic shut-off at maximum collected liquid level - Antistatic system - Metal suction tube, 2 x 550 mm - Filter cleaning, Automatic Tact² Filter Cleaning System - Flat pleated filter, cellulose fibre material - Crevice nozzle - Electrically conductive elbow - Universal floor nozzle width: 360 mm - Bumper bar - Push handle - Swivel castor with brake - Safety class: I - Electrically conductive suction hose, 4 m Cgsdpfex Aux Rsx Agkjp The vacuum cleaner is equipped with an antistatic system with grounding of suction nozzles, tubes, hose, and elbow to discharge electrostatic charges that may occur when vacuuming very fine dust. It can operate with suction hoses of 40 mm and 60 mm diameter. It is ideal for the automotive and construction industries as well as general industrial applications. Two turbines ensure high suction power. Each is equipped with the TACT system, allowing the vacuum to remove up to 1000 kg of fine dust (class A) using a single filter. The flat pleated Eco filter is suitable for collecting very fine class M dust as well as liquids. Its design offers a large filtration surface while maintaining compact overall dimensions. The TACT2 automatic filter cleaning system alternately shakes half of the filter every 7 seconds, effectively preventing reductions in suction power during operation. Included is a drain hose, which facilitates emptying water directly into a floor drain. The vacuum cleaner has a 65-litre plastic container.

Year of construction: 2013, condition: as good as new (ex-display), Technical Details : - Sand Blasting + Liquid electrostatic painting line Cgsdpfx Aohtlw Regkop - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots - Capacity - 400 bottles / day - Line consists . 1. Sand Blasting line 2. Electrostatic painnting line

Condition: new, AUTOMATED PAINT SHOPS Codjdy Ez Iopfx Agkjgp These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, glazing, coating, washing and similar system requirements.