Used Emag Vsc 200 for sale (100)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Hedpsxf Apvefx Abzsw Y-axis: 300 mm Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: used, Year of construction: 2011, Mach. No.: 2380008, Control: Siemens, 4 spindles, travel X/Y/Z 400 x 500 x 425 mm, max. speed 17,500 rpm, pallet changer, 2x 36-position tool changers, tool holder HSK 63, chip conveyor manufacturer: Knoll, type 800 K-1, year 2015, mach. no. 643331, cooling unit manufacturer: Knoll, type FKA/1200, year 2011, mach. no. 478031 Hodpfx Aswufncobzow +++ Attention: This machine is part of an online sale! +++

Condition: used, Year of construction: 2014, Control Siemens 840DSL max. swing diameter 420 mm max. turning height 300 mm max. turning speeds 3400 min/-1 drive capacity - main spindle 45 / 35 kW max. torque 775 / 600 Nm chucking diameter 315 / 400 mm number of tool places 12 Pos. Shank diameter 40 mm x-axis 850 mm z-axis 315 mm Hodpfx Absxfwffjzsw rapid traverse (x/z) 45 / 30 m/min weight of the machine ca. 10,0 t dimensions of the machine ca. 4,2 x 1,5 x 3,5 m In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2006, Technical details: turning diameter: 250 mm swing diameter: 260 mm Hjdjxc Idgspfx Abzow Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools! *

Condition: used, Year of construction: 2008, Technical details: x-travel: 2665 mm y-travel: 2440-2890 mm z-travel: 750 mm max. torque on the spindle: 4400 Nm control: Siemens 840D workpiece diameter - max.: 800 mm workpiece length - max.: 750 mm tool changer with: Scheiben-Revolver 12-fach places spindle speed:: 750 U/min tool taper: 50 voltage: 400 V Total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 7,0 x 3,1 x 4,5 m The machine has a turret with 12 tool stations (VDI 50) and a milling spindle with a tool changer for up to 96 tools. The tool magazine can be loaded during machining, which reduces setup time and allows the use of “sister” tools. The proven EMAG turret is available for turning operations on the machine. The VLC 800 MT multifunctional machining center can completely machine parts up to 800 mm in diameter in a single clamping. If necessary, a new (unused) spindle unit can be purchased as an option. (#1100673) Hsdpjw S Htaofx Abzjw *

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840 Dsl Turning diam. : 250 mm Spindle: Technology:Motortspindle Speed:6.000 rpm Power (max.):39 kW Torque (max.):460 Nm Clampingcylinder:Full-Clampingcylinder Workpiececlamping:3-Jaw chuck, SMW Autoblock, KNCS-NB-260-72 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 40 Tooldrive:6.000 rpm, 7,5 kW, 24 Nm Toolcarrier II: Hjdpfx Asv S Dnksbzow Technology:Drillingstation with Internal coolant supply Taper:Capto C8 In general: Movement in X/Z:1.180/525 mm Rapid travers in X/Z:60/30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure Toolmonitoring:ARTIS CTM Automation:Workpiecestorage, Circulation systems for Storage, Type L Oilmistseparation:Interface Electrostatic extraction prepared

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit Hjdpfxoxf An So Abzow - Knoll coolant system

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,385 h, Control Unit Brand SIEMENS General Data Machine weight 5500 kg Main Drive Spindle speed range 7500 Hodpfx Asxa H Thsbzew Number of axis 3 Movement X-Axis Movement 400 mm Z-Axis Movement 200 mm Turret Number of turrets 1 Tools Number of station 12 Type of tool holder VDI 40 Media Internal cooling Yes Additional Equipment Tool Storage: Conveyor belt for max. 27 workpieces Workpiece Feed: Vibratory spiral conveyor, vibrating plate, single workpiece feed Handling Robot: 8-axis Protective Enclosure: Robot cell Scraper Belt Conveyor Oil Mist Extraction Cooling System: Cooling capacity 3 kW Chip Container: 700x700x600 mm It's System of 2 EMAG VL03 vertical turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this vertical turning machine system with robot included. Contact us for more information about this system. Application Types Turning

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm total power requirement 46 kW weight of the machine ca. 6 t Hsdsw Inr Nepfx Abzsw dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 00404, turning diameter: 250 mm, Available from: 10.10.2025 – The system consists of two individual units that are linked together. TECHNICAL DETAILS Turning diameter: 250 mm Swing diameter: 260 mm MACHINE DETAILS Power supply: 3-phase AC Frequency: 50/60 Hz Operating voltage: 400 V AC Control voltage: 24 V DC Connected load: 36 kW Rated current: 58 A Hjdpfx Aow T Rx Njbzew Main fuse: 80 A NH Total weight: 6,500 kg EQUIPMENT - No driven tools

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 105958, travel distance X-axis: 700 mm, travel distance Y-axis: 375 mm, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 100 mm, workpiece length (max.): 150 mm, The automation is included in the scope of delivery! TECHNICAL DETAILS Travels X-axis: 700 mm Z-axis: 375 mm Workpiece Chuck diameter: 160 mm Max. workpiece diameter: 100 mm Max. workpiece length: 150 mm Main spindle Power 40% / 100%: 19.5 / 12.5 kW Torque 40% / 100%: 75 / 48 Nm Max. speed: 6,000 rpm Turret Tool stations: 12 Hjdpfx Abjxb Tu Iszjw Rapid traverse speed X / Y / Z: 60 / 30 / 30 m/min Driven tools Speed: 6,000 rpm Torque 30% / 100%: 27 / 15 Nm MACHINE DETAILS Frequency: 50 Hz Operating voltage: 400 V Connected load: 30 kW Total weight: 6,000 kg

Condition: used, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 6 mm In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:6 mm Centre height:200 mm Hedpfx Absv Armcszow Grinding wheel dimensions:400x60 mm + 0x60 mm Workpiece headstock: Speed:1 rpm Workpiece weight max.:25 kg Sanding diameter max.:390 mm Mounting:MK4 Grinding headstock: Peripheral speed:2 m/s Grinding disc dimensions right:0 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:1,1 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter: mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Hodpoxf A Npofx Abzjw Infeed and outfeed Reversing gripper

Condition: good (used), Year of construction: 2011, Control: FANUC max. workpiece diameter: 220 mm max. workpiece weight: 20 kg max. turning length: 175 mm max. speed: 4,500 rpm travel path: X 660, Z= 300 mm tool changer with 12 stations chip conveyor Hedjvzrk Sepfx Abzjw

Condition: excellent (used), Year of construction: 2005, Fanuc 18 iTB control Swing diameter 210 mm, X/Z travel 400/200 mm, Hsdpfxew Rdcpo Abzsw Spindle speed 7500 rpm, 12-station turret with driven tools. Chip conveyor belt, 3-jaw chuck Chip conveyor

Condition: used, Year of construction: 2005, Technical details: Hedpfx Aboizlh Hezow weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: used, TECHNICAL DETAILS - Number of axes : 2 - Number of turrets : 1 - Max. turning diameter : 220 [mm] - Maximum workpiece height : 175 [mm] - X/Z stroke : 660/300 [mm] MAIN SPINDLE - Spindle speeds : 4500 [rpm] - Spindle power : 27 [kW] - C axis indexing precision : 0.001 [°] TURRET - Tool type : VDI40 - Number of positions : 12 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 36 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3120/2266 [mm] - Machine height : 3200 [mm] - Machine weight : 7000 [kg] MACHINE HOURS - Number of hours under power : 74809 [h] - Number of spindle hours : 30521 [h] EQUIPMENT - CNC : Fanuc 32i-A Hedpfx Aexc N I Tjbzjw - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Parts conveying strip - Chuck 3 jaws

Condition: used, Year of construction: 2014, functionality: fully functional, Travel path - X axis: 740 mm Travel path - Z axis: 400 mm Travel path - Y axis: 30 mm (optional) Chuck diameter: 260 mm Max. turning diameter: 200 mm Spindle speed: 4,500 rpm Tool speed: 6,000 rpm Rapid traverse Z-axis: 15 m/min Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 30 mm Hedow Imtfjpfx Abzow Machine weight approx.: 9,000 kg

Condition: ready for operation (used), Year of construction: 2010, For sale is a turning line for drive shafts incl. end machining machine (cutting to length & drilling) The line consists of the following machines: Hsdpsupgbwofx Abzsw Lang -Laru > cutting to length and drilling 3x Emag VTC 250 for turning the drive shafts All machines are connected with an Ewab belt Each lathe is loaded with a KUKA robot The technical data of the machines can be seen in the pictures.

Condition: used, functionality: fully functional, We are offering a complete EMAG line consisting of 6 machines (VL3, VL5, and VL5i – see nameplates) including central chip conveyor and coolant supply. The machines are in operational condition and can be inspected under power at our facility in 47225 Kedzierzyn-Kozle, Poland. We are happy to sell internationally, but please note that special packaging will be required for overseas shipment. Disassembly and export packaging suitable for shipping overseas are the buyer’s responsibility. The listed price is for a single machine without chip conveyor and coolant supply. If you purchase the entire line, the price is EUR 120,000, including chip conveyor and coolant supply. Hsdpfx Absu U D E Nszsw

Year of construction: 2003, condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Hsdpfx Abevva Hkszow

Condition: used, Year of construction: 2021, turning diameter 400 mm turning height 300 mm swing diameter 520 mm workpiece weight 60 kg x-axis 995 mm y-axis +/-30 mm z-axis 580 mm chucking diameter max. 500 mm Tool drive speed max. 6.000 1/min Main spindle drive power 37 KW tool turret with 12 work positions BMT75 total power requirement 55 kW weight of the machine ca. 13,5 t Circulating workpiece transport system, O-design Drag frame system for 10 workpieces Coolant supply: 15 bar Coolant pump with a flow rate of approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Dual coolant filter, manually switchable Filter mesh 100 µm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change Max. = 2,200 rpm (standard speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 External finishing cutter 1x 8.BMT25VL8IKX50 External roughing cutter 1x 60.7516VL8IKDI15 Engraving tool 1x 60.7516VL8IKDI15 Tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holder Hsdpfx Aowbiztobzsw 2x 27.V520HYDL26 drill bits, 20mm diameter 1x 42.V522L08Ik drill bits, 22mm diameter 1x 27.V514WNL31 Drill Bit Diameter 14mm Software Package Operating Instructions / Maintenance Manual

Condition: used, TECHNICAL DETAILS - axes number : 3 CAPACITY - machining diameter : 250 [mm] - travels (X/Z) : 1600 / 300 [mm] - rapid feeds (X/Z) : 60 / 30 [m/min] SPINDLE - spindle nose : DIN55026 - size 6 - power : 18 / 22 [kW] - torque : 202 / 250 [Nm] - speeds : 0 - 6.000 [rpm] - indexing precision axis C : 0,001 [°] TURRET - number of positions : 12 - tool holders : VDI40 - number of rotary positions : 12 - rotary tools speed : 6.000 [rpm] - rotary tools power : 8,5 [kW] MILLING HEAD - number of spindles : 6 - 5 HSK 50 spindles upon Ø : 107,95 [mm] - 1 HSK40 spindle : at center ELECTRICAL SUPPLY - voltage : 400 [V] - installed power : 45 [kW] Hjdpjuhbfyefx Abzow DIMENSIONS - floor space : 4.550 x 2.810 [mm] - height : 3.600 [mm] - weight : 10.000 [kg] EQUIPMENT - control CNC SIEMENS 840D-sl - 3 colors status lamp - linear scales : HEIDENHAIN - automatic part loader with conveyor - chips conveyor - coolant tank * with pump 10 bars * with washing gun - coolant through spindle - IFS mist separator - collection of parts supports - collet chuck - 3 live tool-holders

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 103979, We offer for sale CNC vertical lathe EMAG, VL5i F., year of production 2016, used, preserved, functional. Still in production. Must see. EXW price incl. loading. More information on request. Hedpsuyh Tdefx Abzew

Year of construction: 2011, condition: ready for operation (used), An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible. Hodpfx Aewtg E Tsbzjw