Used Emco E45 for sale (151)

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm Kfodpfowvuf Tjx Aansa >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 1 x 12 tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N Kjdpswx R Rkjfx Aanefa rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

Year of construction: 2007, operating hours: 8,500 h, condition: excellent (used), functionality: fully functional, Vertical BAZ Emco FAMUP MCX 750-1200 with IKZ 40bar year of construction: 2007 Control: Fanuc 21i Running hours: 8.500h Chip Blaster high pressure system - Max. Speed 8.000 min. - Tool magazine with 24 magazine places (ISO 40), - Tool magazine ISO 40 - 24 tightening bolts ISO 40 - Standard painting: red - gray - black - Spindle is prepared for high pressure cooling (connection A) - Tapping without compensating chuck - Central lubrication system - Chip removal from the housing via flushing device - Flushing gun for cleaning of working area, clamping devices, parts - Coolant device with 3 adjustable nozzles - Coolant tank 500 l - Spindle blowing device for cleaning the fixture during tool change - Illumination of the working area by halogen lamp 24 V - Two-color alarm lamp TECHNICAL DATA MCX 750 axis X - longitudinal: 750 mm axis Y - transverse: 500 mm WORKING RANGE axis Z - vertical: 640 mm clamping area: 900 x 520 mm T-slots: number, width, spacing 5x18x100 mm max. table load: 400 KG Kfsdeh Akhkopfx Aanea TABLE distance table surface - floor mm 925 speed range: 50 ÷ 8.000 min spindle motor power: 13/9 KW tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive Belt drive rapid traverse X,Y,Z m/1' 24 Working feed X,Y,Z m/1' 20 AXIS DATA Axis acceleration (X,Y,Z) G 0.25 One-way positioning accuracy in total stroke range XYZ µm ± 8 One-way repeatability X, Y, Z µm ± 8 PRECISION Reversal span µm 5* Number of tool positions: 24 Tool selection random Max. Tool diameter with (without) adjacent tools ø 75 (150) Max. Tool length: 250 mm Max. tool weight: 6 KG TOOL CHANGE Tool change time (tool/tool): 1.5". Connected load: 20 KVA dimensions LxDxH: 2,650x2,400x3,050m weight: 5,5to

Year of construction: 2001, condition: excellent (used), Digital display Heidenhain. Slide travel range Slide travel longitudinal (X) 450 mm Carriage travel transverse (Y) 300 mm Slide travel vertical (Z) 350 mm clamping surfaces 800 x 400 mm Tool holder SK 40 quill stroke 100 mm Swiveling vertical milling head ± 90 Speed range 50-2500 rpm Machine dimensions: Length 1485 mm width 1475 mm height 1475 mm Weight approx. 1500 kg Kfjdpfxonab A Ns Aanea

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm Kjdpfx Aasd I R E Nonofa speed range 50 - 10.000 rpm table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), Emco emcomat FB4 Milling Machine CNC control over X and Y axes by Proto Trak Type AGE 2 Also usable in conventional mode. SK40 spindle taper Spindle speeds: 50-2500 rpm X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Kfedpfx Aoxc H I Reanja Equipped with coolant system, emergency stop, and table guard with interlock.

Condition: used, Year of construction: 2008, greates pass round over bed 600 mm swing diameter over face slide 500 mm control Siemens Sinumerik 840 PL max. turning diameter 430 mm Max. Turning length 744 mm max. bar material dia. 65 mm travel -x axis 270 mm travel -z axis 750 mm travel -x2 axis 205 mm travel -z2 axis 750 mm travel -y axis 100 (+/- 50) mm main spindle speeds 0 - 5.000 U/min Subspindle speed 0 - 7.000 U/min number of tapers in turret head 2x 12 tool taper VDI 30 CNC Turning- and Milling Center | EMCO - HYPERTURN 665MCPlus with main and counter spindle, C and Y axis, 2 turrets aligned for driven tools, and equipped with a bar feeder Irco Profimat as well as a coolant system Knoll SF 1000/Turbo- 1. The machine has approximately 26,710 hours of production operation. Scope of delivery / Equipment: + 2 spindles: main and counter spindle with C-axis + 2 turrets for driven tools (each with 12 stations) Kfodpfsv Rgzkjx Aanja + Upper turret equipped with Y-axis + Internal cooling + Chip conveyor + Bar feeder Irco Profimat + Driven tools (straight and angled) + Chucks for main and counter spindle + Extraction system + Workpiece discharge device with conveyor belt + Coolant system Knoll SF 1000/Turbo-1 + Various holders, approx. 80 pieces VDI 30 + Boring bar holders + Jaw holders The machine is in well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Working Area Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Max. table load: 100 kg Table – floor distance: 880 mm Spindle Speed range: 50 – 10,000 rpm Kfsdpfoxa Araox Aanea Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h EQUIPMENT 30 holders 2 Gressel vices Note: The machine will remain powered until 21.09.2025.

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Kodpfeg Rcf Sex Aanjfa

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories collet equipment is included Kedpfxjwpkd Sj Aanjfa

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation Kfjdpfxov Hqnto Aanoa - Replacement turret (after complete overhaul)

Year of construction: 2006, condition: excellent (used), Control system Siemens 840D –Chop Mill—Carte Eternet Spindle recently changed stroke X axis 2000 Kodpfx Aaol Dr D Usnofa stroke Y axis 800 stroke Z axis 700 rotation speed range 30 000 tr/min coolant through spindle (CTS) 30 bars with 2 metal filters 60 microns Electronic handwheel Linear scales Pressurized optical rulers for X and Y axis motion control Chip conveyor Coolant gun

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Machine available IMMEDIATELY with a wide range of accessories ex works Mayrhofen for a bid Kodpfx Aaenk Uabenefa

Condition: used, Year of construction: 1995, functionality: fully functional, turning diameter: 25 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, bar passage: 25 mm, bar diameter (max.): 25 mm, Emco ET425 2 main spindles, 2 pick-off spindles Kfedpfx Aew Adxpoanja 2 turrets, 12 tools per turret or 4 driven tools with double bar feeder magazine

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Kodpjg Rcf Iefx Aanefa

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V Ksdpfjv Iqm Sex Aanjfa EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: repair required (used), Year of construction: 2008, operating hours: 9,000 h, functionality: not functional, machine/vehicle number: R65EW1851, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 4,200 rpm, No reserve price - guaranteed sale at the highest bid! Nimble and precise machine with lots of accessories, driven tools and collet chuck with various collets, including square and hexagon. Condition: Used machine, previously used in Thailand. Due to the climatic conditions on site, the machine shows external signs of use. The pneumatics show signs of wear, especially from the distributor: brittle hoses, some broken. It is not possible to assign the hoses from the distributor valve without a diagram. The pneumatics must be repaired. TECHNICAL DETAILS Swing diameter over bed: Ø 600 mm Swing diameter over cross slide: Ø 360 mm Distance main spindle (clamping flange) - tailstock center: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel ranges Travel path X: 210 mm Travel path Z: 610 mm Main spindle Spindle connection according to DIN 55026: KK 6 Outer spindle diameter in the front bearing: Ø 100 mm Spindle bore: Ø 73 mm Hollow clamping cylinder with draw tube, max. passage: Ø 66.5 mm Max. chuck size: Ø 250 mm AC motor, power (100%, 60% ED): 15 / 18 kW Speed range (infinitely adjustable): 60 - 4,200 rpm Max. torque: 192 Nm Kfjdpfx Aaevrz A Sonea Tailstock Automatic tailstock: hydraulically operated Tailstock travel: 500 mm Max. tailstock pressure force: 8,000 N Travel speed: 20 m/min Inner taper of the tailstock quill: MK 4 Feed drives Rapid traverse speed X/Z: 24 / 24 m/min Feed force X: 5,000 N Feed force Z: 7,000 N Acceleration time from 0 to rapid traverse: 0.2 s Position spread (according to VDI 3441 in X/Z): 3 / 5 µm C-axis (spindle 1 and 2) Resolution of the rotary axis: 0.001° Rapid traverse: 1,000 rpm Spindle indexing (disc brake): 0.01°

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: A8EW4982, turning diameter: 250 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, controller model: Sinumerik Operate, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 100 mm Z-axis travel: 300 mm C-axis for main spindle: available C-axis speed: 0 - 1,000 rpm Main drive power: 5.5 kW Main drive speed: 60 - 6,300 rpm Tool turret: 12-way VDI16 Driven tools: 6 pieces Driven tool speed: 200 - 6,000 rpm Driven tool power: 1.2 kW Max. finished part length: 120 mm Max. finished part diameter: 25 mm Max. finished part weight: 0.5 kg EQUIPMENT - Coolant system Kjdpov Dlr Isfx Aanofa - Pneumatic hollow clamping cylinder - Pneumatic tailstock - Full enclosure - Central lubrication - WinNC for Sinumerik Operate -I/M - Machine license M.M - SINUMERIK Operate key module - MOC: Integrated PC with 12" color display, keyboard and mouse - Safety devices in accordance with CE - Various tool holders (radial tool holder M4 (2x), radial tool holder M3 (1x), collet holder ESX 16 (2x), set of collets ESX 16 (1x), indexable insert drill holder Ø16 mm (1x), boring bar holder Ø10 mm (1x), radial angle milling holder 90° (1x), axial milling holder straight (1x)) - Various clamping systems (RÖHM power chuck KFD #HS 895/3 with 926 mm through-hole, 1 set of soft top jaws (432 095) with 1/16" × 90° serration, set of hard reversible jaws 95/3, collet chuck 385E / 5C including draw tube (A8Z 150 010) for draw collets 385E / 842 / 5C Ø2 - 25.5 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R6AP3801, turning length: 600 mm, turning diameter: 360 mm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS Turning diameter: 360 mm Turning length: 600 mm Control: Siemens CNC 840 D MACHINE DETAILS Operating voltage: 400 V~ Phases: 3/PE Frequency: 50/60 Hz Ksdpjw Em A Ajfx Aanofa Maximum current: 48 A Nominal current: 36 A Short-circuit current (Ik): 6 kA EQUIPMENT - Double spindle

Condition: excellent (used), Year of construction: 2011, operating hours: 10,111 h, functionality: fully functional, machine/vehicle number: M12400511, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Heidenhain TNC 620 X-axis: 1,200 mm Y-axis: 600 mm Z-axis: 600 mm 4th axis: included in delivery, dismantled Spindle Taper: SK 40 Max. speed: 12,000 rpm Kodpfxsvrz Smo Aanjfa Condition: New spindle (2024), runs very smoothly Tool changer Capacity: 30 tools MACHINE DETAILS Control switch-on time: 34,597 h Program run: 11,726 h Spindle run time: 10,111 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Kfsdpow Dfhuefx Aansa

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. Kjdpov Iqlzofx Aansfa TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout Kfsdpswy Hvxsfx Aansa - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting - live center - bed stop - machine feet

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Kodpfxev Ip Izs Aansfa Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! Ksdpfev Imzfox Aanjfa The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck