Used Emco Turn 340 for sale (148)

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Itodpfxsk Nk I Ne Aanor

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm Ijdpfx Aaoua E Naenetr spindle taper MT: 2 voltage: 380/400 V

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal Tool Milling Machine Emco Emcomat FB-450 Linear with Position Indicator – Near-Mint Condition, CE-Compliant!! Technical Data: >> Year of manufacture: 2013 | Machine No.: F9A124962 >> Milling table clamping surface: 800 x 400 mm T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 150 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rates: 10–5000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 10 kW >> Spindle brake >> Technical documentation, spare parts plans, operating manual included >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head >> Rotary table >> Machine vice Itedpewycv Iefx Aansr >> Steady rest About the Machine: For sale is a Universal Tool Milling Machine Emco Emcomat FB-450 Linear with position display, in near-mint condition. The machine comes from a government operation and was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal operation. Conversion from vertical to horizontal mode is very simple due to the tilting vertical head. The Emco has been mechanically and electrically tested in our workshop. Take advantage of the opportunity to inspect and test the machine under power at our facility.

Year of construction: 2007, operating hours: 8,500 h, condition: excellent (used), functionality: fully functional, Vertical BAZ Emco FAMUP MCX 750-1200 with IKZ 40bar year of construction: 2007 Control: Fanuc 21i Running hours: 8.500h Chip Blaster high pressure system - Max. Speed 8.000 min. - Tool magazine with 24 magazine places (ISO 40), - Tool magazine ISO 40 - 24 tightening bolts ISO 40 - Standard painting: red - gray - black - Spindle is prepared for high pressure cooling (connection A) - Tapping without compensating chuck - Central lubrication system - Chip removal from the housing via flushing device - Flushing gun for cleaning of working area, clamping devices, parts - Coolant device with 3 adjustable nozzles - Coolant tank 500 l - Spindle blowing device for cleaning the fixture during tool change - Illumination of the working area by halogen lamp 24 V - Two-color alarm lamp TECHNICAL DATA MCX 750 axis X - longitudinal: 750 mm axis Y - transverse: 500 mm WORKING RANGE axis Z - vertical: 640 mm Isdpfx Ash Akhkoanetr clamping area: 900 x 520 mm T-slots: number, width, spacing 5x18x100 mm max. table load: 400 KG TABLE distance table surface - floor mm 925 speed range: 50 ÷ 8.000 min spindle motor power: 13/9 KW tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive Belt drive rapid traverse X,Y,Z m/1' 24 Working feed X,Y,Z m/1' 20 AXIS DATA Axis acceleration (X,Y,Z) G 0.25 One-way positioning accuracy in total stroke range XYZ µm ± 8 One-way repeatability X, Y, Z µm ± 8 PRECISION Reversal span µm 5* Number of tool positions: 24 Tool selection random Max. Tool diameter with (without) adjacent tools ø 75 (150) Max. Tool length: 250 mm Max. tool weight: 6 KG TOOL CHANGE Tool change time (tool/tool): 1.5". Connected load: 20 KVA dimensions LxDxH: 2,650x2,400x3,050m weight: 5,5to

Year of construction: 2001, condition: excellent (used), Digital display Heidenhain. Slide travel range Slide travel longitudinal (X) 450 mm Carriage travel transverse (Y) 300 mm Slide travel vertical (Z) 350 mm clamping surfaces 800 x 400 mm Itedpjnab A Nofx Aanjr Tool holder SK 40 quill stroke 100 mm Swiveling vertical milling head ± 90 Speed range 50-2500 rpm Machine dimensions: Length 1485 mm width 1475 mm height 1475 mm Weight approx. 1500 kg

Condition: ready for operation (used), Emco emcomat FB4 Milling Machine CNC control over X and Y axes by Proto Trak Type AGE 2 Also usable in conventional mode. Iedpjxc H I Refx Aanotr SK40 spindle taper Spindle speeds: 50-2500 rpm X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Equipped with coolant system, emergency stop, and table guard with interlock.

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Itsdjk Nk Iwopfx Aanjr

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm Isdpod I R E Nofx Aanotr weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) Iedpfx Aaowxxd Eonjtr >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Working Area Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Isdpfxjxa Aras Aanjtr Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Max. table load: 100 kg Table – floor distance: 880 mm Spindle Speed range: 50 – 10,000 rpm Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h EQUIPMENT 30 holders 2 Gressel vices Note: The machine will remain powered until 21.09.2025.

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories Iedpfxowpkd So Aanotr collet equipment is included

Year of construction: 2006, condition: excellent (used), Control system Siemens 840D –Chop Mill—Carte Eternet Spindle recently changed stroke X axis 2000 stroke Y axis 800 stroke Z axis 700 rotation speed range 30 000 tr/min coolant through spindle (CTS) 30 bars with 2 metal filters 60 microns Electronic handwheel Linear scales Pressurized optical rulers for X and Y axis motion control Chip conveyor Coolant gun Itsdpsl Dr D Uofx Aanjr

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Machine available IMMEDIATELY with a wide range of accessories ex works Mayrhofen for a bid Itjdpfenk Uabox Aaner

Condition: used, Year of construction: 1995, functionality: fully functional, turning diameter: 25 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, bar passage: 25 mm, bar diameter (max.): 25 mm, Emco ET425 2 main spindles, 2 pick-off spindles Itjdpfxjw Adxpo Aanjr 2 turrets, 12 tools per turret or 4 driven tools with double bar feeder magazine

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Iedpfx Aaewxxdfenjtr Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V Iodpfov Iqm Ssx Aanjtr EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: excellent (used), Year of construction: 2011, operating hours: 10,111 h, functionality: fully functional, machine/vehicle number: M12400511, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Heidenhain TNC 620 X-axis: 1,200 mm Y-axis: 600 mm Isdpfjvrz Smox Aanjtr Z-axis: 600 mm 4th axis: included in delivery, dismantled Spindle Taper: SK 40 Max. speed: 12,000 rpm Condition: New spindle (2024), runs very smoothly Tool changer Capacity: 30 tools MACHINE DETAILS Control switch-on time: 34,597 h Program run: 11,726 h Spindle run time: 10,111 h

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting - live center - bed stop Iedpowy Hvxsfx Aanetr - machine feet

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm Itedewag Stspfx Aanor >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Itsdpfx Aajv Iqlzonsr Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, total height: 1,690 mm, total width: 1,480 mm, total length: 1,500 mm, table width: 400 mm, table length: 800 mm, type of input current: three-phase, table load: 400 kg, overall weight: 1,500 kg, input voltage: 380 V, workpiece weight (max.): 400 kg, input current: 16 A, input frequency: 50 Hz, milling length: 450 mm, Equipment: documentation/manual, Machine is complete with all accessories and tools three axes digital readout Heidenhahn X-axis range 450 mm Y-axis range 300 mm Z-axis range 350 mm Table length 800 mm Table width 400 mm Table load 400 Spindle speeds 2500 Rpm X-axis feed 0-4000 mm/min. Y-axis feed 0-4000 mm/min. Z-axis feed 0-4000 mm/min. Dimensions (Estimated) Length 1500 mm Width 1480 mm Height 1690 mm Weight 1500 kg Ijdpfjwnya Tjx Aanstr

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system Itodswvuf Topfx Aansr About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg Iodpfx Aajv Ip Izonstr T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list