Used Emco for sale (151)

Condition: good (used), Year of construction: 2007, with UniRobot FMB Control: SIEMENS 828D Bed swing: Ø 540 mm Cross slide swing: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel: X = 210, Z = 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm continuously variable Max. torque: 192 Nm C-axis Rapid traverse: 1000 rpm TOOL TURRET 12 stations all driven Mounting: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Fsdpsv S Ekysfx Afpefu Automatic tailstock, hydraulic Travel: 500 mm Internal taper: MK 4 FMB MH5L-XP robot cell With Yaskawa Motoman MH 5 L robot Max. payload: 5 kg Max. working radius: 895 mm Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (hand roller): -190° ~ +190° B-axis (joint/articulation): -135° ~ +135° T-axis (hand rotation): -360° ~ +360° With coolant system Chip conveyor, extraction system Total weight (machine/robotic): approx. 5300 kg

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Fsdpfx Aswcdytofpefu Parts feeding via shuttle (included) Two machines are available

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 1 x 12 Ffodswx R Rkepfx Afpju tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

Condition: excellent (used), functionality: fully functional, EMCO Maximat Super 11 – Precision Lathe in Very Good Condition For sale is a used EMCO Maximat Super 11, a robust and precise universal lathe "Made in Austria." This machine is ideally suited for workshops, training centers, or demanding hobbyists who value quality and accuracy. Fsdoxqx Nvepfx Afpjfu The machine is pre-owned but well-maintained and fully operational. All gear shifts are smooth, the guides are in good condition, and the machine has been regularly serviced. Technical Specifications: Center height: 140 mm Distance between centers: 600 mm Spindle speed range: 55 – 2200 rpm (8 geared steps) Tailstock: MT2 taper Tool holder: Quick-change toolpost Lighting: Integrated LED work light Weight: approx. 360 kg Dimensions (L × H × W): approx. 1.3 m × 1.2 m × 0.6 m Condition & Accessories: Machine runs quietly with low vibration Tailstock is smooth and easy to adjust with high precision Quick-change toolpost included LED work light for optimal visibility Various clamping devices or tools can be purchased additionally upon request (by arrangement) Price: The price is within a reasonable range and negotiable. Open for price discussions upon serious interest. Miscellaneous: Collection preferred, viewing by appointment possible Machine can be shown under power

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm spindle taper MT: 2 Ffjdpfx Afsua E Naepou voltage: 380/400 V

Condition: good (used), EMCOTurn 120 CNC lathe. 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Ffodpeu Rd S Refx Afpou Ex-College machine

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories collet equipment is included Ffodjwpkd Sepfx Afpeu

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul) Fsdpfxov Hqntj Afpsfu

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Fsdpfxsk Nk I Ns Afpofu

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Fodpfx Afek Nk Iwopsfu

Condition: good (used), Year of construction: 2008, Offered here is a machining center from the manufacturer Emco Famup equipped with a 4th axis and tailstock. The machine will be loaded onto a truck free of charge. Manufacturer: Emco Famup Model: EmcoMill E900 Year of manufacture: 2008 Control: Siemens Sinumerik 810D - ShopMill Technical data: Travel paths X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 360*0.001° Fedpfsxrvrdjx Afpofu Clamping surface of table: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12,000 rpm Spindle power: 13 kW Coolant supply through spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 t Dimensions: approx. 4000x2400x2900 mm

Condition: good (used), Offered here is a machining center from the manufacturer Emco Famup. The machine will be loaded onto a truck free of charge. Manufacturer: Emco Famup Model: EmcoMill E900 Year of manufacture: 2010 Control: Siemens Sinumerik 810D - ShopMill Technical data: Travel X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12,000 rpm Spindle power: 13 kW Coolant supply through spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 t Fedpfx Afexrvg Uopofu Dimensions: approx. 4000x2400x2900 mm

Condition: excellent (used), EMCO TURN 365 – CNC Turning Center For sale: EMCO TURN 365 CNC turning center, in excellent technical condition, immediately available and ready for operation. Year of manufacture: 2000 EMCO Turn 368/65 Operating hours: 53,000 Ffedpfx Aoxiy Ukefpeu Year: 2000 Chip conveyor Drip tray Maximum swing diameter over bed [mm]: ø600 Swing diameter over cross slide [mm]: ø360 Maximum turning diameter [mm]: ø310 Maximum workpiece length [mm]: 520 Maximum bar capacity [mm]: ø65 Distance between centers (spindle nose – tailstock center) [mm]: 669 X-axis travel [mm]: 210 Z-axis travel [mm]: 610 AC motor power (Sinumerik / Fanuc) with integrated holding brake [kW]: 24.4 / 22 Spindle speed range (stepless) [rpm]: 60 – 3200 Max. torque (Sinumerik / Fanuc) [Nm]: 267 / 242 C-axis (rotary axis) on main spindle Rotary axis resolution [°]: 0.001 Rapid traverse speed Siemens / Fanuc [mm/min]: 1000 / 100 Automatic tailstock, hydraulically actuated Tailstock travel [mm]: 500 Max. tailstock force [N]: 8,000 Travel speed [m/min]: approx. 20 Tailstock quill taper: MT 4 Disc turret with directional logic, optionally with driven tools Number of tool stations: 12 Tool holders according to DIN 69880 VDI 30 Tool cross-section for square tools [mm]: 20 × 20 Boring bar diameter [mm]: ø32 Number of driven tool stations: 12 Speed range [rpm]: 0 – 5,000 Max. drive power [kW]: 5 Max. torque [Nm]: 20 • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4,000 kg • Installation dimensions (L × W × H): approx. 4,000 × 2,000 × 2,000 mm — Condition & Scope of Delivery The machine is in very well-maintained condition. The offer includes comprehensive documentation including operator’s manual. • Inspection possible at any time • Free loading • Delivery by arrangement possible — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices subject to VAT. Errors and alterations excepted.

Year of construction: 2006, condition: excellent (used), Control system Siemens 840D –Chop Mill—Carte Eternet Spindle recently changed stroke X axis 2000 stroke Y axis 800 stroke Z axis 700 rotation speed range 30 000 tr/min coolant through spindle (CTS) 30 bars with 2 metal filters 60 microns Electronic handwheel Linear scales Pressurized optical rulers for X and Y axis motion control Ffodpfx Ajl Dr D Usfpeu Chip conveyor Coolant gun

Year of construction: 2005, condition: excellent (used), Control: Siemens 840 D Travel distances: X-260 mm; Z-610 mm Speeds: Main spindle 0-5000 RPM; Sub-spindle 0-7000 RPM C-axis Y-axis 80 mm 12-station turret, all driven Tool holder VDI 30 Speed of driven tools 0-5000 RPM Bar passage 65 mm Accessories: Hainbuch collet chuck on main and sub-spindle Fjdpjppyrysfx Afpsfu Part catcher Chip conveyor Emco loading magazine LM 1200 Various tool holders

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. Ffsdpfx Afjw I S Uuopju X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: excellent (used), EMCO Model E 900 Control type SIEMENS SINUMERIK 810 D Table dimensions 1000 x 520 mm Linear guides ✓ Travel X-axis 900 mm Y-axis travel 500 mm Travel Z-axis 500 mm Axes 3 Spindle speed 12,000 rpm Spindle mounting ISO 40 - DIN 69871 Tool magazine 20 places Coolant supply through the spindle ✓ Spindle motor power 13 kw Fjdpjpgng Hefx Afpjfu Year 2017 CE machine ✓ Overall dimensions 2570 x 2445 x H 2920 mm

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Fsdpfxev Iqm Ss Afpofu Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Fsdpfx Afov Iqlzjpsfu Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow Fodjv Imzfjpfx Afpsfu - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Ffjdjv Ip Izepfx Afpou Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Working Area Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Max. table load: 100 kg Table – floor distance: 880 mm Spindle Speed range: 50 – 10,000 rpm Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h EQUIPMENT 30 holders 2 Gressel vices Fjdpoxa Arajfx Afpefu Note: The machine will remain powered until 21.09.2025.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: A8EW4982, turning diameter: 250 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, controller model: Sinumerik Operate, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 100 mm Z-axis travel: 300 mm C-axis for main spindle: available C-axis speed: 0 - 1,000 rpm Main drive power: 5.5 kW Main drive speed: 60 - 6,300 rpm Tool turret: 12-way VDI16 Fjdpfsv Dlr Iox Afpefu Driven tools: 6 pieces Driven tool speed: 200 - 6,000 rpm Driven tool power: 1.2 kW Max. finished part length: 120 mm Max. finished part diameter: 25 mm Max. finished part weight: 0.5 kg EQUIPMENT - Coolant system - Pneumatic hollow clamping cylinder - Pneumatic tailstock - Full enclosure - Central lubrication - WinNC for Sinumerik Operate -I/M - Machine license M.M - SINUMERIK Operate key module - MOC: Integrated PC with 12" color display, keyboard and mouse - Safety devices in accordance with CE - Various tool holders (radial tool holder M4 (2x), radial tool holder M3 (1x), collet holder ESX 16 (2x), set of collets ESX 16 (1x), indexable insert drill holder Ø16 mm (1x), boring bar holder Ø10 mm (1x), radial angle milling holder 90° (1x), axial milling holder straight (1x)) - Various clamping systems (RÖHM power chuck KFD #HS 895/3 with 926 mm through-hole, 1 set of soft top jaws (432 095) with 1/16" × 90° serration, set of hard reversible jaws 95/3, collet chuck 385E / 5C including draw tube (A8Z 150 010) for draw collets 385E / 842 / 5C Ø2 - 25.5 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R6AP3801, turning length: 600 mm, turning diameter: 360 mm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS Turning diameter: 360 mm Turning length: 600 mm Ffjdpfxew Em A Ae Afpou Control: Siemens CNC 840 D MACHINE DETAILS Operating voltage: 400 V~ Phases: 3/PE Frequency: 50/60 Hz Maximum current: 48 A Nominal current: 36 A Short-circuit current (Ik): 6 kA EQUIPMENT - Double spindle

Condition: ready for operation (used), Emco emcomat FB4 Milling Machine CNC control over X and Y axes by Proto Trak Type AGE 2 Also usable in conventional mode. Ffsdpfxjxc H I Rs Afpju SK40 spindle taper Spindle speeds: 50-2500 rpm X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Equipped with coolant system, emergency stop, and table guard with interlock.