Used Emergency Stop Relay for sale (9,694)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Ksdpewc Rk Eofx Aanofa Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, functionality: fully functional, Siemens 3TK2821-1CB30 Safety Relay. Kodpov Rg N Uefx Aanofa SIRIUS safety relay with relay enabling circuits (EC) 24 V AC/DC, 22.5 mm Screw terminal EC instantaneous: 3 NO EC delayed: 0 NO SC: 1NC Autostart/manual start Basic device Maximum achieved SIL: 1, PL: c as expansion unit up to maximum achieved SIL: 3, PL: e 2 for sale. 1 piece/180 EUR. Good working condition. Please check out our other listings as well.

Condition: new, ELMAG Mobile lighting and emergency power system MBNA 40 WDE - PREMIUM series - Stage V on trailer with manual lighting mast Ksdpfx Aet H I R Ijanjfa Comprehensive control panel - Comprehensive control panel with DSE7320 control module - Start/stop via push buttons (keyless) - Digital control panel for engine monitoring - Analog displays for the most important operating parameters - 2-stage insulation monitoring - No earthing spike required! - Full integration - no increased noise level when the door is open! - Operating elements for system control - All elements permanently labeled with laser engraved labels ADVANTAGES Socket connections: Direct supply 3 Schuko 16A 1 CEE 16A-5p 1 CEE 32A-5p 1 CEE 63A-5p Socket connections: System supply 1 CEE 63A-5p 1 CEE 125A-5p Disconnection: Emergency stop Fuel level Oil pressure Temperature automatic Overload ThM-SS per connection Generator: Synchronous control AVR control Protection class IP23 E Speed governor DSE7320 4 voltmeters kW meter 3 ammeter Hertzmeter Hour meter Fuel gauge Temp. display Oil drain pump Ambient lighting LED Lifting eyes Oil pressure indicator Trickle charge Light mast 5m manual Headlights 4x RP1000LED Tandem chassis

Condition: good (used), Length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop -Length stop: for various processing options -Max. stop length: 500 mm Ksdpfswyu Ntox Aansfa -Shaft: Ø 25 mm -Dimensions: 700/100/H110 mm -Weight: 3.6 kg

Condition: used, Roller conveyor length 50 mm Roller conveyor width 300 mm roll diameter 50 mm Wheel width 300 mm height adjustment 480 - 530 mm weight 52 kg dimensions of the machine ca. 420 x 400 x 500 mm Kodpfjwntz Rjx Aanefa

Condition: refurbished (used), Relay comb relay V23054 D1020-F104 from Axicom 0232 Made in Germany used good condition Kfsdpsfc Dv Nefx Aansa Expansion of index machines GE42 / GE65

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Kfjdpfx Aaowc Afhsnja Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, functionality: fully functional, Siemens 3TK2822-1CB30 Safety Relay. Ksdpfx Asv Rg Idoansfa SIEMENS 3TK2822-1CB30 SIRIUS safety relay with relay enabling circuits (EC) 24 V AC/DC, 22.5 mm Screw terminal EC instantaneous: 2 NO EC delayed: 0 NO SC: 0 NC AUTOSTART Basic device Maximum achieved SIL: 3, PL: e Good working condition. Please check out our other listings as well.

Condition: new, ELMAG Mobile lighting and emergency power system MBNA 100 WDE - PREMIUM series - Stage V on trailer with manual lighting mast Comprehensive control panel - Comprehensive control panel with DSE7320 control module - Start/stop via push buttons (keyless) - Digital control panel for engine monitoring - Analog displays for the most important operating parameters - 2-stage insulation monitoring - No earthing spike required! - Full integration - no increased noise level when the door is open! - Operating elements for system control - All elements permanently labeled with laser engraved labels ADVANTAGES Socket connections: Direct supply 3 Schuko 16A 1 CEE 16A-5p 1 CEE 32A-5p 1 CEE 63A-5p Socket connections: System supply 1 CEE 125A-5p Shutdown: Emergency stop Fuel level Oil pressure Temperature automatic Overload ThM-SS per connection Generator: Synchronous control AVR control Protection class IP23 E Speed governor DSE7320 4 voltmeters kW meter 3 ammeter Hertzmeter Hour meter Fuel gauge Oil drain pump Ambient lighting LED Lifting eyes Oil pressure indicator Temp. indicator Trickle charge Kjdpfxot H I Sre Aansfa Light mast 5m manual Headlights 4x RP1000LED Tandem chassis

Condition: new, Speed relay - new, available sizes: ALNICO 01 (01T) ALNICO 02 (02T) Kedowa Sngjpfx Aanjfa ALNICO 04 (04T ALNICO 11

Condition: used, Roller conveyor length 10 mm Kfodpfx Aaowntz Donsa Roller conveyor width 275 mm roll diameter 40 mm Wheel width 275 mm height adjustment 500 - 570 mm weight 20 kg dimensions of the machine ca. 360 x 300 x 600 mm

Condition: used, Year of construction: 2005, operating hours: 196 h, functionality: fully functional, machine/vehicle number: 527102228, type of input current: three-phase, input voltage: 400 V, type of cooling: water, total width: 1,400 mm, total length: 4,400 mm, total height: 2,200 mm, fuel: diesel, overall weight: 17,800 kg, continuous power (apparent): 2,000 kVA, continuous power: 1,600 kW (2,175.39 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 76,000 cm³, input frequency: 50 Hz, For sale: 2000 KVA generator set including ADAM fan cooler Generator set dimensions (LxWxH): 4400 x 1400 x 2200 mm Weight: approx. 17,800 kg Engine: MTU 16V4000 G21 Generator: New Age Stamford Kfjdpsxcvfxsfx Aansa 2000 KVA generator set Engine and generator fully mounted on base frame Cooling system: Separate free-standing fan cooler as dual-circuit cooler (manufacturer: ADAM Kühlerbau) Fan cooler dimensions (LxWxH): 1400 x 2600 x 2560 mm (Dry) weight approx.: 1,650 kg If you have any further questions, please feel free to contact us.

Condition: used, Electrical contact length stops for Mubea and Peddinghaus in various lengths. The price is for a Mubea length stop 1000 mm. Kfsdpfxsf Srn Re Aanea

Condition: used, Motor protection relays, relays, heating current monitoring, pre-heating for generators, contactor, semiconductor contactor, contactor -Type: 3UA60 00-2X -Price: per piece -Number: 1x available -Weight: 0.8 kg Kodpedahcrjfx Aanjfa

Condition: new, GEKO 7401 ED-AA/HEBA E-Start Generator 986552 Note: Currently 2 units immediately available from stock - subject to prior sale Equipment: Silent design with large air filter and large muffler, especially low noise. Control box operation opposite exhaust. Protected battery installation in the switch box. Automatic low oil shut-off. Fuel gauge. Operating time with one tank filling up to 11 hours. One CEE 16A-3ph. socket, one CEE 32A-1ph. socket, one Schuko socket. With start-up amplification that can be switched off. Generator asynchronous el. Power: 3~ cos φ 1,0 6580 VA el. Power: 1~ cos φ 1,0 5500 VA Voltage 3~ 400 V voltage 1~ 230 V current 3~ 9,4 A max. total current 1~ 24 A Current 1~ (CEE) 24 A current 1~ (Schuko) 16 A max. starting current cos φ 0,6 25 A 3~ (at 20% voltage drop) 40 A 1~ Frequency 50 Hz Protection class generator IP 54 Engine type Honda GX 390 Super Silent Kedpfx Aaegibvwsnefa number of cylinders 1 Speed 3000 rpm Fuel type gasoline Engine oil capacity 1,1 l Engine power 7,5 kW Cooling engine/generator air/air Tank capacity 20 l Operating time: full load / half load 6 / 11 h Weight 107 / 115 kg with battery Dimensions L x W x H 740 x 500 x 530 mm Sound power level LWA 97 dB(A) Sound pressure level (10m) 69 dB(A) GEKO dealer - please send us your inquiry

Condition: used, Roller conveyor length 3000 mm Roller conveyor width 460 mm 0 3000 mm Kfsdpfjhuk T Tex Aanoa Working width 460 mm Wheel width 460 mm roll diameter 90 mm 0 6 St. work height max. 460 mm weight 280 kg dimensions of the machine ca. 3,05 x 0,75 x 0,65 m

Condition: used, Motor protection relays, relays, heating current monitoring, pre-heating for generators, contactor, semiconductor contactor, contactor -Type: 3UN62-00-2H -Price: per piece Ksdpfjdahctsx Aansfa -Number: 1x available -Weight: 0.8 kg

Condition: used, Stop for chop saw, pull saw ... -Recording: Bosch profile -Length unit: 2000 mm Kfodpfx Aodapm Rsansa -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

Condition: used, Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor Kfjdpfx Aeb A N Ruoanea -Type: 7PU57 20-0AB30 -0.6 s -Price: per piece -Number: 12x available -Weight: 0.2 kg

Condition: used, Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KZT01 -5-100 s -Price: per piece -Number: 5x available -Weight: 0.2 kg Kfedpfob A Rxzex Aanja

Condition: used, Contacts, relays -Type: 4342310 Kedeb Uhtxopfx Aansfa -Number: 3x available -Price: per piece -Weight: 0.7 kg/piece

Condition: used, Power supply systems, construction site emergency lighting, escape sign luminaires, escape route luminaires, emergency and escape route lighting, emergency lights, escape routes Kjdpfx Aedpmmtsanjfa -Emergency lighting with charger and controller and batteries -Dimensions large lamps: 665/180/H120 mm 36 pieces -Dimensions small lamps: 420/170/H90 mm 14 pieces -2x items of lamps: with charger and control available -Price: per item -Weight: 820 kg/item

Condition: used, Stop for press brake, edging bench, guillotine shears ... Kjdpfxsc Sr Izs Aansfa -Recording with: elongated hole -Length unit: approx. 300 mm -Fine adjustment -Number: 2x available -Price: complete -Dimensions: 2x 410/320/H120 mm -Weight: 28 kg

Condition: used, Time relay, safety time relay, safety controller, timer, timer -Manufacturer: Grasslin -Type: Q FRWu Kfodpjcc Hu Usfx Aansa -Number: 1x relay available -Price: per piece -Dimensions: 80/70/H65 mm -Weight: 0.19 kg

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece Kfodpfob Nkuvjx Aanoa -Weight: 0.07 kg