Used Encoder for sale (723)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: nbh 170R Year of manufacture: 2005 The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 1.000/800/800 mm - Workpiece swivel range within the working area: Ø 900 mm - Distance from table centre to spindle nose in Z: 138.9 (HSK-A 100) mm Position measurement system - Encoder scales: direct (measurement method) - Position uncertainty A according to DIN ISO 230-2: 0.007 mm 180-degree pallet changer with 4 x 90-degree pallet rotators Pallet - Pallet clamping surface to DIN 55201, Form A2: 500 x 630 mm - Transport load per pallet: approx. 0,8 tons - Height of the system: 1.100 mm NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Repeatability: ± 0,001 degrees - Accuracy across all positions: ± 0,002 degrees - Permissible torques on the clamped table: * Tangential torque: max. 7.000 Nm * Tilting moment: max. 16.000 Nm - Clamping forces: * on the table: 147.000 Nm Hsdpfx Abjzviaiotjt * on the pallet: 84.600 Nm Working spindle / gear head - Tool holder to ISO 12164 (DIN 69893): HSK-A 100 - Diameter at front bearing: 100 mm - Drive power 100% duty cycle/60% duty cycle: 37/46 kW - Speed range: 25 – 10.000 rpm Feed / Feed force / Rapid traverse: - Feed range X/Y/Z axes: 1 – 60.000 mm/min - Feed force on X/Y/Z axes, 25% duty cycle: approx. 15.000 N - Rapid traverse speed, X/Y/Z axes: 60 m/min - Rapid traverse, rotary table: 30 rpm - Acceleration: approx. 6 m/s² - Ball screw (pitch): Ø 50 (30) mm Tool magazine for 4 magazine cassettes, including two additional magazine cassettes. Electrical - Rated power: 74 kVA Compressed air Coolant system, make: KNOLL The internal coolant supply can be switched to compressed air. - Coolant pump 20–70 bar - Coolant tank, 2.500 l Machine layout - Space requirements, L x W x H: approx. 8 x 3.5 x 3.5 m - Weight: approx. 24 tons ACCESSORIES / EQUIPMENT: - Control system: Siemens SINUMERIK 840D ADDITIONAL EQUIPMENT FOR AUTOMATED MANUFACTURING PALLET STORAGE SYSTEM Technical data sheet with full details, including information on the wide range of features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: ready for operation (used), Mitsubishi HA300NCB-S Spec NO 74010 + thread damaged + encoder OSA104 J4AVP3X410S, used, good condition, 100% functional, scope of delivery as per photos Hjdpfxerbxkuj Abtjt

Condition: used, Gearboxes, bevel gears, worm gears, roller conveyor gears -Manufacturer: Düspohl, gearbox with encoder Hsdpfxst H Tqye Abtst -Translation: i = ? -Hollow shafts: Ø 32 x 80 mm -Shaft distance: 197 to 206 mm, dimensions see photo technical drawing -Encoder: Red Lion Controls 4601200 -Dimensions: 1120/100/H155 mm -Weight: 28 kg

Condition: ready for operation (used), Fanuc A06B-2076-B503 AC servomotor, serial number: C22CC3145 + encoder A860-2070-T321, used, in good condition, fully functional, scope of delivery as shown in the photos. Hjdpfxox Dt S Se Abtot

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder - Left and right side-register sections Hsdpfx Aszlqwzjbtst - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: H513201129, type of input current: AC, input voltage: 220 V, measuring range X-axis: 750 mm, measuring range Y-axis: 50 mm, measuring range Z-axis: 250 mm, Selling a high-quality and fully functional Sony Magnescale 3-axis digital measuring system for machine tools, milling machines, special machines, or measurement tasks. The system comes from an industrial application and is in used, good condition. All components are functional, and the display works perfectly. Scope of delivery: Sony LH51-3 digital display (3 axes) Sony SR128-025 linear scale – measuring length 250 mm Sony SR128-045 linear scale – measuring length 450 mm Sony SR128-075 linear scale – measuring length 750 mm Sony TS-1 3D touch probe Extension cable Connection cable as shown in the photos Operating manual (digital as a PDF file) Technical data: 3-axis digital display Sony LH51-3 Hedpfxezmxk So Abtjt Measuring system: Sony Magnescale Axis X: SR128-075 – measuring length 750 mm Axis Y: SR128-045 – measuring length 450 mm Axis Z: SR128-025 – measuring length 250 mm Resolution up to 0.001 mm (adjustable depending on the device) Absolute and incremental mode Radius/diameter display Reference and zero point functions Industrial design for machine tools Note: Only the items shown in the photos are included in the sale. Please refer to the photos. Inspection and functional testing are possible by arrangement. A functional video can be sent before shipping. Private sale, excluding any warranty, guarantee, or right of return. Keywords: Sony Magnescale, Sony LH51, LH51-3, Sony SR128, Sony TS-1, digital display, DRO, digital readout, displacement measuring system, linear scale, linear encoder, position display, milling machine, lathe, machine tool, CNC, machine retrofit, Heidenhain, Acu-Rite, Accurite, Fagor, Newall, Mitutoyo, RSF Elektronik, Renishaw, Renishaw encoder, Renishaw linear scale, Renishaw measuring probe, Sino, Easson, Anilam, machine DRO, scale for milling machine, digital display for milling machine, drilling machine.

Year of construction: 2008, condition: ready for operation (used), This 4-axis LASAG KLS 246 CL60 was manufactured in 2008, a laser welding machine with enclosed class 4 safety cabin and camera window. It features a linear-motor XY table (X 400 mm, Y 100 mm), Z travel 300 mm, and a direct-drive rotary table for precision handling. L2-CNC control with SERCOS and a 15-inch touchscreen, plus dedicated water chiller included. Consider the opportunity to buy this LASAG KLS 246 CL60 Laser Welding Machine. Contact us for more information. • Application: 4-axis positioning system for laser processing/laser cutting • Base and enclosure: • Welded steel base frame; dimensions LxWxH 1115 x 443 x 814 mm; color RAL 7035 • Granite structure with base plate, granite angle, bearing units, threaded bushings • Laser safety cabin, class 4 (EN 60825-1), full enclosure with viewing windows • Front sliding door with handle, integrated laser safety window, camera-supported laser protection glass • Sheet steel panels 2 mm, powder-coated RAL 7035; removable cover • 3-color signal light; door interlock switch; profile frame 30x30 and 60x30 • Axes configuration: • A axis: RT3A 100x100 direct drive rotary table • Z axis: PFS 325x300 precision slide • Y axis: PFL 230/400 linear axis • X axis: 180/100 linear axis • XY table (PFLG 400x100): • Travel: X 400 mm, Y 100 mm; speed 6 m/min • Positioning accuracy ±0.005 mm/300 mm; repeatability ±0.001 mm • Acceleration 10 m/s²; max load 1 kg • Continuous force with cooling 1110 N; linear motor drive • Material: cast iron GGG-25; water cooling • Encoder: Heidenhain LC 483, accuracy class ±5 µm • Z axis: • Travel 300 mm; speed 0.12 m/min • Positioning accuracy 0.03 mm/300 mm; repeatability 0.003 mm • Ball screw K25x5, accuracy class T5; preloaded spindle • Motor mounting via flange coupling; material cast iron; vertical installation • Rotary axis (A/C axis) RT3A100x100: • Electronically commutated 3-phase synchronous motor Hjdpfx Abjzvyatetjt • Table diameter 99 mm; through hole 20 mm; centering 30 H7 • Weight 5.2 kg; protection class IP40 (IP54 with air purge) • Runout

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,900 h, travel distance X-axis: 870 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 930 mm, total height: 1,178 mm, total width: 3,585 mm, table load: 800 kg, overall weight: 16,100 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 22,000 W, tool weight: 10,000 g, product length (max.): 4,957 mm, number of axes: 4, This 4-axis Kitamura Mycenter HX500iG was manufactured in 2015. It features a maximum workpiece diameter of 800 mm and a maximum workpiece height of 1,100 mm. The machine includes a robust pallet size of 500 x 500 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter HX500iG horizontal machining centre we have for sale. Contact us for further details. • CNC controller: Arumatik-Mi • Pallet size: 500 x 500 mm (19.7" x 19.7") • Number of pallets: 2 • Pallet change time: 8.8 s • Max. workpiece diameter: Ø 800 mm (Ø 31.5") • Max. workpiece height: 1,100 mm (43.3") • B-axis travel: 0–360° (full 4th axis, DD motor driven) • B-axis rapid feed: 43,200 deg/min (120 rpm) • Table surface to spindle center: 50–850 mm (2.0"–33.5") • Table center to spindle nose: 140–1,070 mm (5.5"–42.1") • Drive method: Gear drive, 4-step • Max. spindle torque: 266.4 N·m (196.5 ft-lbs) • Spindle motor: 22 kW (30 HP AC / 15 min) / 15 kW (20 HP AC / continuous) • Rapid feedrate (X/Y/Z): 60 m/min (2,362 ipm) • Cutting feedrate (X/Y/Z): 60 m/min (2,362 ipm) • Tool storage capacity: 50 tools (fixed pot, random bidirectional) • Tool holder style: CT(BT) 40 / HSK-A63 optional • Max. tool diameter: Ø 95 mm (3.7") / Ø 170 mm (6.7") with adjacent pot empty • Max. tool length: 600 mm (23.6") • Tool-to-tool change time: 1.3 s • Chip-to-chip change time: 3.8 s minimum • Linear scales: Fine-resolution optical feedback on X/Y/Z • Rotary scale: Direct high-resolution (0.02 sec) rotary encoder feedback on B-axis • Thermal displacement control: Intelligent advanced control system • Coolant tank volume: 700 liters • Power requirement: 55 kVA, 200V AC, 3-phase • Air requirement: 0.5 MPa, 410 L/min (90 psi, 14 cfm) Hodpfjzl S Nxsx Abtet Additional equipment • Through-spindle coolant: High-pressure internal coolant system at 20 bar (RCM 20 bar) • Chip conveyor: Scraping / double-decker type • Work area tool sensor: Renishaw tool presence transmitter/laser inside working area Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2007, functionality: fully functional, Nordson Asymtek Axiom X-1020 fluid dispensing system: Positioning & Accuracy Hjdpfezundkox Abtet * Drive System: Linear encoded X-Y drive system with a closed-loop control circuit. * Accuracy: High precision up to ± 0.050 mm. * Sensors: Equipped with sealed glass linear encoders for accurate position measurement. [1, 2] Dispensing & Valve Options * Valve Compatibility: Suitable for advanced dispensing heads such as the DJ-9000 / DJ-9500 DispenseJet (for non-contact jetting) and the DP-3000 or DV-7000 Heli-flow pumps. [2, 3, 4] * Process Control: Patented Mass Flow Control (MFC) and Calibrated Process Jetting (CPJ™) modules for automatic weight measurement and fluid flow adjustment. [5, 6] * Applications: Optimal for flip-chip & CSP underfill, dam-and-fill, die-attach, and thermal paste applications. [2] Electrical & Pneumatic * Power Supply: 180–260 VAC (adaptive for 200–240 VAC), single-phase, 30A, 50/60 Hz. * Air Pressure: Requires a minimum of 6.2 bar (90 psi) stable compressed air supply. * Heating: Integrated substrate heating (pre-dispense, dispense, and post-dispense stations) for a stable thermal environment. [5, 6, 7] Dimensions & Weight * Machine Weight: Approximately 435 to 490 kg, depending on the exact internal configuration. * Certifications: Complies with international industry standards such as CE, SEMI-S2, SEMI-S8, and SMEMA. [5, 7]

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: Hodpfexxh Udex Abtjt NOT OPERATIONAL - X-axis encoder: faulty

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm Hsdpfezlhmmex Abtot AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: ready for operation (used), Siemens 1PM4103-2LZ26-1DS1-Z motor SN: W4311732901001 without tachometer/encoder - Z = S07, used, minor signs of wear, 100% fully functional, delivery as shown in photos, Z see nameplate Hsdpfex Dv Iijx Abtjt

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm Hsdpfexxidasx Abtst - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: ready for operation (used), Heidenhain / Siemens ID 736 FX2001-5JE22-3DA0 Encoder SN: 38263684A, used, in good condition, 100% functional, scope of delivery as shown in the photos Hodpfxox Err Ao Abtot

Condition: good (used), Year of construction: 2020, Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, rotary indicator, resolver, incremental encoder -Manufacturer: Sick, Incremental rotary encoder, programmable -Type: DFS60B-S4PC10000 -Item No.: 1036721 -Voltage: 4.5-32 V Hjdpoxv T Rxsfx Abtst -Shaft: Ø 10 x 19 mm -Quantity: 1 encoder available -Dimensions: 75/60/H60 mm -Weight: 0.2 kg

Year of construction: 2015, operating hours: 2,420 h, condition: ready for operation (used), travel distance X-axis: 300 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 5,500 kg, spindle motor power: 2,000 W, spindle speed (max.): 600 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details. • Center distance: 600 mm • Center height: 140 mm • Max swing diameter: 275 mm • Max workpiece weight between centers: 100 kg • Max workpiece torque (flying): 40 Nm (including clamping devices)Workpiece spindle • Taper: MK4 and KK5Tailstock • System: Cylindrical screw pressure spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm • Taper: MK4Grinding spindle • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubricationGrinding wheel • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control)AxesX-axis (= FEEDBACK MOVEMENT) Hodjyzn Dmspfx Abtjt • Drive: Electromechanical with ball screw • Feed rate: 0.01–8000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Glass scale, internal resolution 0.0005 mmZ-axis (= TABLE MOVEMENT) • Drive: Electromechanical with ball screw • Table speed: 0.01–12000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Rotary encoder, resolution 0.001 mmControl / Electrical • The control panel is mounted to the machine stand using a swivel bracket. • Control system: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, safety integrated • Motor protection switch, fuses: Siemens • Connectors: WAGO Harting connectors in the work area • Operating voltage: 400 V, 50 Hz, 3 phase • Network type: TN network, without residual current device (RCD) • Control voltage: 230/24 V • Installed electrical power: approx. 14 kW / 18 kVA • Compressed air: Oil-free compressed air, approx. 5 bar • Control cabinet: Air conditioning unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 APneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 L/min at 3.5 bar • Cleaning pump capacity: 20 L/min at 1.5 barOperating data • Operating hours: 2,420 hours Additional equipment • Air extraction unit • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Hsdpfx Aozkpupebtet Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: excellent (used), Year of construction: 2013, HT 665 MC plus TCMY - FANUC Multi-axis CNC turning machine for complete machining of turning/milling parts; Integrated spindle motors (ISM) on the main and counter spindle with thermocompensation system (liquid-cooled) Drive power: Main spindle - 29 kW Counter spindle - 22 kW Speed range: Main spindle 0 - 5000 rpm Counter spindle 0 - 7000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (max. bar diameter ø 65mm) Counter spindle: KK6 Y-axis: Travel range +/- 50mm The Y-axis is designed so that the resulting cutting forces are distributed across two axes. This results in extremely high rigidity for all machining operations. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology FANUC 18i TB with Manual Guide i dialog programming. Includes: ·Draw tube cylinder including draw rod ·Part ejector and flushing through the counter spindle ·2x 12-position tool turret VDI 30 radial with direction logic for up to 2x 12 driven tool stations! Swivel speed adjustable with feed switch. o Performance data: o Max. 6.7 kW at 2650 rpm o Torque constant 25 Nm o Speed range 0-5000 rpm o C-axis for main and counter spindle ·Part removal device for the finished parts ·Chip conveyor with a discharge height of 1200mm programmable (Type "hinged belt") Hodpfezczgvex Abtjt ·Coolant system integrated into the chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. flushing pumps with 3.7 bar ·Electrostatic oil mist separator ·Hydraulic unit ·Machine light ·Documentation Year of manufacture: 2013 Includes: two Hainbuch chucks, collet chuck for collets 185E plus reduction is also included.

Condition: new, Manufacturer: HEIDENHAIN Type: ROD 780 ID Number: 383600-02 Measuring method: Incremental Design: Angle encoder with self-bearing Shaft design: Solid shaft Hjdpfx Abezcgufjtet Shaft diameter: 14 mm For separate shaft coupling Line count: 18,000 Output signal: 1 Vss / 1 Vpp sinusoidal System accuracy: ±2 arc seconds Electrical connection: M23 connector, 12-pin Cable length: 1.0 m Axial tolerance: up to ±1 mm

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. • Working area X: 3000 mm • Working area Y: 1200 mm • Max. clamping height Z1: 100 mm • Max. workpiece thickness Z2: depending on equipment/application • Table height: approx. 1000 mm • Pendulum operation X: 2 × 1400 mm • Free space center X: 200 mm • Pendulum operation alternative X: 2 × 900 mm • Free space center alternative X: 1200 mm • Machine weight: approx. 6000 kg • Guide system: precision linear guides hardened approx. 62 HRC • Central lubrication: automatic for all main axes and ball screw • Drive system: AC servo motors with encoder • X/Y drive: rack and pinion • Z drive: ball screw • Feed rate: 40 m/min • Rapid traverse X/Y: 80 m/min • Rapid traverse Z: 25 m/min • Acceleration: 3 m/s² • Extraction connection main spindle: 300 mm • Extraction connection drilling spindles: 120 mm • Air speed: approx. 28 m/s • Air volume: approx. 7080 m³/h • Vacuum pump capacity: 100 m³/h • Compressed air connection: 1/2" • Air pressure: 6 bar • Control voltage: 24 V DC • Connected load: approx. 24 kVA • Power supply: 3/N/PE 400/230 V 50 Hz • Frequency converter: 0–480 Hz Hsdpfx Aozug Afjbtst • Ambient temperature: +15 to +35 °C • Control system: IMATRONIC NT 231 • Interpolation: linear all axes, circular 2.5D • Resolution: 0.001 mm • Spindle: HSK F63 • Tool clamping force: 11000 N • Max tool weight: 6 kg • Speed range: 1500–18000 rpm • Spindle power: 7.5 kW • Cooling: water cooled • CNC axis: 360° rotating • Tool magazine type: plate changer • Tool positions: 18 • Max tool length: 150 mm • Max tool diameter: 100 mm (150 mm with free сосед positions) • Max load: 60 kg • Saw unit motor: 1.5 kW • Saw speed: 5600 rpm • Saw blade diameter: max. 150 mm • Drilling unit: 14 spindles • Spindle stroke: 70 mm • Drive: 2.2 kW • Speed: 3150 rpm • Drill diameter max: 20 mm • Adapter head spindles: 4 • Speed max: 6000 rpm • Drill diameter max: 12 mm Table equipment: • 6 adjustable support arms • 12 suction cups 114 × 159 × 100 mm • 6 suction cups 125 × 75 × 100 mm • Vacuum system: 2-circuit clamping system • Electrical cabinet size: 2000 × 1800 × 600 mm DEFECT: • The main spindle no longer releases the interchangeable drill head

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460038, Technical specifications: Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head - Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5'' Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm Spindle spacing: 300 mm Spindle speed range: 1–17,500 rpm Spindle taper: DIN 69893-HSK-A63 (internal coolant supply) Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg Electrical data: - Supply voltage: 3x400 V / 50 Hz - Installed power: approx. 85 kVA / 125 A Machine dimensions: - Installation area: approx. 3.6 x 6 x 3.7 m - Weight: approx. 10,500 kg Equipment includes: Hodpfx Ajxxrc Ssbtjt - CNC control: Siemens 840D SL - Linear axis measuring systems: Heidenhain linear scales - Chip conveyor: Knoll Typ 550 K-1 - Oil cooling system - Shaft, guideway, and switch cabinet cooling system - 2 oil lubrication systems - Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h) - Fire protection: Kraft & Bauer - Workpiece presence detection (P/Y): Low pressure air sensors - In-process measurement: Marposs T25 - Tool breakage control and length measurement system: Inductive sensor (BRK) - Tool support detection in working spindle Machine status: NOT OPERATIONAL / NON-FUNCTIONAL Installed components: - Sensors for tool presence in spindle & part presence - Hydraulic pump - Hydraulic unit level & temperature sensors (Parker) - Tool magazine piston & sliding door system (2 units) - Communication module: Murr - A-axis position encoder - Hydraulic switches (Parker, 4 units) - Emulsion filtration unit is shared with another machine (SW BA321 2460038) - High-pressure pump from emulsion filtration system

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge Hodpfxoycvq Ao Abtst • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Machine total operating hours: 3200 h Spindle operating hours: 470 Gildemeister CTX Beta 1250 TC, Year of manufacture: 2013, Control system: Siemens 840D ERGOline with ShopTurn Main spindle as an integrated spindle motor, ISM 76, Drive power: 25/34 kW (100/40% duty cycle), 5000 min-1 Hollow chuck (hydraulic), internal pull rod - 67 mm Max. pulling force 68 kN at Pmax. 45 bar C-axis and spindle brake (hydraulic) Cross slide on top with turning/milling spindle as a motor spindle, with hydraulic clamping for turning, tool holder HSK-63A DIN 69893 Y-axis ± 100 mm B-axis ±110° with pneumatic clamping Turning length 1250 mm Tool disc magazine 1 x 24 positions Tailstock, automatically positionable, hydraulically actuated, with integrated center bearing Absolute, direct linear encoders in X, Y, Z axes Coolant pump 6 bar; 20 l/min, chuck flushing system, externally on the main spindle, coolant system externally for the turning/milling spindle Hinged belt chip conveyor, discharge height 1200 mm Cooling system for spindle motors, motor console, turning/milling spindle, B-axis torque motor USB interface, Ethernet interface Connection for oil mist extraction, electrical/mechanical Eccentric turning and milling Milling of gears using a generating process 5-axis simultaneous machining, contour machining Tool monitoring system, Counter spindle as an integrated spindle motor Hsdpfx Aezqtmijbtst Workpiece in-process measurement system by Renishaw Reinforced coolant pump 12 bar Chuck flushing system on the main and counter spindle Tailstock function for the counter spindle Coolant supply through the counter spindle DMG Netservice

Condition: ready for operation (used), Indramat MDD093A-N-040-N2L-110GA0 / 250485 SN: MDD093-22508 without encoder, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Hodpfxsx Dub Io Abtjt

Condition: ready for operation (used), Fanuc A06B-0216-B400 AC servomotor, serial number: C162F1DEE + encoder A860-2000-T301, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hedpfxox Dt Dns Abtot