Used Keyboard for sale (448)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. Hsdpfezu Nm Hjx Airsw * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Year of construction: 1993, condition: not inspected (used), Converted from an existing injection molding machine. Hsdpsy U Ii Nsfx Airow

Year of construction: 1992, condition: good (used), keyboard-Klöckner formetk year 1992 Hsdjyx Diyspfx Airew

Condition: used, Year of construction: 2018, machine/vehicle number: 18201655, Useful capacity: 105 L Total tank volume: 210 L Mother starter reserve: 31.5 L Tank made of AISI 304 stainless steel Submerged mixing impeller made of AISI 304 stainless steel Lid and outlet valve made of AISI 304 stainless steel Electronic control with screen and keyboard Maturation and preservation cycles Hsdpfx As Agn Iceirew Adjustable maturation temperature from 20 to 40 °C Adjustable preservation temperature from 4 to 20 °C Adjustable maturation time from 1 to 24 hours Integrated refrigeration unit Refrigerant: R134a High outlet for starter extraction Low outlet for complete draining Power supply: 400 V three-phase + neutral + earth Frequency: 50 Hz Electrical power: 3.6 kW Current: 9.6 A Dimensions (L x W x H): 680 x 1,165 x 1,614 mm Weight: 300 kg Year of manufacture: 2018 Key benefits Useful capacity of 105 L for the production of liquid starter 210 L tank made of AISI 304 stainless steel Programmable maturation and preservation cycles Submerged impeller for homogenizing the mixture Integrated refrigeration unit for thermal regulation Electronic control panel with display Preservation of a mother starter reserve after extraction Two outlets for sampling and draining Stainless steel lid with removable sealing gasket Made in France

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table height: 610 mm, table length: 760 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The machine underwent a complete overhaul and modernization in the mid-2000s. The machine is in excellent condition and offers very high precision. It features a 10,000 rpm spindle and a high-pressure coolant system. It has been continuously maintained and serviced. Hodpfx Aij Ab Eu Djrjw A new Yaskawa servo card was replaced two years ago at a cost of EUR 3,000. The machine has a new touchscreen, plus one additional spare touchscreen, and the keyboard has also been replaced. The spindle motor was completely refurbished two years ago.

Condition: used, Touchscreen, keyboard, mouse Hedey Tt R Aspfx Airsw For sale: operator panel removed from a Finn-Power L6A CO2 laser. Touchscreen, keyboard, mouse. Manufacturer: BECKHOFF Manufacturer’s code: CP6802-1007-0010 / 387162-010 Touch screen: Siemens / 1P 6FC5203-0AC00-1AA0 / SINUMERIK 840 D CNC KEYBOARD (AT) OP032S Price: 1000 EUR. If you have any further questions, we will be happy to answer them.

Condition: used, Beckhoff CPPC 7112-1007 Beckhoff PC Monitor with stainless steel keyboard Mainboard: Boser HS6237 SBC CPU: Intel Celeron Memory: 128 MB SDRAM Slot 1: Slot plate with USB ports and DVI port Slot 2: Boser SBC-V2.2B Slot 3: Slot plate with COM 1 and COM 2 Slot 4: Slot plate with LPT 1 Hard disk: Toshiba MK2023GAS, 20 GB CD-ROM: Teac 235HF 1.44 MB A: Display: 15-inch Toshiba LTM 15C428S The monitor does not have a touchscreen. Touchpad: Glidepoint on PS/2 Ports: KT 7000 on PS/2 Hedeu Ef Rqspfx Airow Power supply: 24V DC Item condition: used

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Hodezaq Ikepfx Airsw Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 Hodpfez R Rpbex Airow • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,935 mm, total width: 5,500 mm, table width: 1,100 mm, table length: 560 mm, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 4,800 mm, number of axes: 3, This 3-axis DMG Mori Seiki CMX 800 V was manufactured in 2017. It features a travel range of 800 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a robust table size of 1,100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki CMX 800 V vertical machining centre. Contact us for further details. - CNC Control: HEIDENHAIN TNC 620 (SLIMline Control Panel / MC 7420D PC & Screen + TE 715D Keyboard)- Table Clamping Surface: 1,100 x 560 mm- Max Table Load (Center): 800 kg- Table Loading Height (Floor to top edge): 850 mm- T-Slots: 4 / 18H12 (Distance between slots: 100 mm; 1 reference slot: 18H7)- Spindle Speed Range: 20 – 12,000 rpm- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 82 Nm / 54 Nm- Tool Taper / Interface: SK40 (DIN 69871 / DIN 69872 Form A/B pull stud)- Tool Clamping Force: 10 kN (SK40 / BT40)- Tool Magazine Capacity: 30 pockets (chain type)- Max Tool Diameter (with adjacent tools): 80 mm- Max Tool Diameter (with free adjacent pockets): 125 mm- Max Tool Length (from spindle nose): 300 mm- Max Tool Weight (Automatic tool change): 8 kg- Max Total Magazine Load: 240 kg- Feed Drives: AC Servomotors on X, Y, and Z axes- Rapid Traverse Rate (X / Y / Z): 30 / 30 / 30 m/min- Feed Speed Range (X, Y, Z): up to 20,000 mm/min- Position Measurement Resolution: 1 µm- Positioning Uncertainty P (VDI/DGQ 3441): 6 µm- Chip Management: Integrated scraper conveyor (bande grattante, 220 L coolant tank, 20 L/min pump at 5 bar)- External Coolant & Air Supply: External adjustable coolant nozzles and blow air (M25)- Internal Cleaning: Work area rinsing / flushing gun (pistolet de rinçage)- Manual Axis Movement: Electronic handwheel (HR 510FS)- Access / Safety Authorization: DMG MORI SMARTkey electronic mode selector- Apparent Power: 32 kVA- Rated Supply Voltage: 400 V AC ±10% (3/N/PE)- Mains Frequency: 50/60 Hz- Control Voltage: 230 V AC / 24 V DC- Full Load Current (In max): 52 A- Main Fuse: 63 A- Short Circuit Breaking Capacity (Ics): 0.63 kA- Basic Machine Weight: approx. 5,400 kg- Chip Conveyor Weight: 500 kg Technical Specification Taper Size SK 40 Hsdpe Agb E Rofx Airsw

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Hedpfezzpwrsx Airow Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, INTERMAC Genius 61 CT-RED CNC Glass Cutting Line with MOVETRO Genius 61 LS-BL Loader & 12 Jumbo Racks (2019) Key Technical Data Category: Glass processing machinery / CNC Glass Cutting Table Manufacturer: INTERMAC (Biesse S.p.A., Italy) Line designation: INTERMAC Line of Machines Line serial number: 1000027954 Year of construction: 2019 Glass format: Jumbo size Total installed power: 28 kW Air consumption: 800 Nl/min Condition: Used, excellent / very low working hours Certification: CE marked System Components & Specifications 1. CNC Float Glass Cutting Table: Model: INTERMAC GENIUS 61 CT-RED Serial number: 1000029755 Electrical connection: 400 V / 50 Hz / 3 phases Full-load current: 27.45 A Power: 14.7 kW Control: Standalone PC control console with screen and keyboard 2. Automatic Double-Sided Loader: Manufacturer: MOVETRO s.r.l. (Italy) Model: GENIUS 61 LS-BL Serial number: M18137 Year of manufacture: 2019 Hedpfo Af E Hbjx Airjw Power: 6.0 kW Pneumatic working pressure: 7.0 bar Total weight: 4,600 kg Suction system: Integrated suction cups for automated loading from both sides 3. Glass Storage System: 12 heavy-duty A-frame racks designed for Jumbo glass storage Rail guide tracks for automated loader traversing 4. Break-Out / Service Table & Safety: Break-out table model: GENIUS 61 BT (Serial number: 1000027756) Full perimeter safety fencing and interlock safety systems

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 750 h, power: 9 kW (12.24 HP), input voltage: 430 V, number of axes: 4, number of slots in tool magazine: 10, controller manufacturer: Yaskawa, total height: 800 mm, table length: 4,000 mm, table width: 2,000 mm, Machine purchased from the manufacturer Plot Electronic in 2016. Used for milling models and molds in materials: MDF, polyurethane. In 2022 it was upgraded with the addition of a 4th axis and an oscillating head. Full technical specification of the machine: - Stable welded construction with an annealed gantry made in hybrid monolith technology - Mechanics – linear guides, ball carriages - Helical rack and pinion system - Spindle with tool changer, 9kW, ISO 30, ER 32 - Linear tool magazine holds 10 tools - Drives – AS servo drives - CNCGraf control module in Polish - Simulation possible before machining, real-time cutting visualization - Material height sensor - Tool length sensor - Spindle cooling system – compressed air Hedpfx Aijzxqtpsrjw - Control cabinet with computer and keyboard - Vacuum table - T3000K oscillating head - 4th rotary axis on a tailstock, mountable on the table - Spindle speed control system

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: AB00019454, functionality: fully functional, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, For sale, a fully functional CNC drilling machine, model SCM Morbidelli CX210, with high axis travel speeds, a very large drilling head, and a drilling head for Blum fitting spacing, as well as a saw for creating grooves. Very fast drilling, without an electro-spindle. Specifications: Min./Max. element length mm 200/3,050 Min./Max. element width mm 50/1,300 Min./Max. element thickness mm 8/95 Max. element weight kg 70 Hodpfx Aiozz Syvorjw Max. feed rate in X-Y-Z axes m/min 70-40-30 DRILLING HEAD F31LTC Vertical spindles pcs. 21 Horizontal spindles in X axis pcs. 6 Horizontal spindles in X axis pcs. 4 Spindle speed rpm 4,500 Fixed saw in X axis, diameter mm, rpm 125 5500 Max. saw thickness mm 6 Motor power kW 2.2 ADDITIONAL OPTIONS Inverter for the drilling head to adjust the drilling head speed in the range of 3000-8000 rpm Drilling head for fittings with 45/9.5 spacing "eye-M PRO" console integrated with PC Device allowing CNC operation via provided programs. Supplied with: - system for monitoring machine status via an LED light bar - industrial PC: Fanless design, IP 53 protection - Intel I7 processor – 2.80/3.80 GHz - 8 GB RAM – DDR4 - 256 GB SSD hard drive - Windows 10 IOT – 64 bit program - QWERTY keyboard, English version - 3-function wired mouse - Ethernet RJ45 port - USB port: 1 available - nominal operating temperature +5°C / +35°C - color LCD monitor, 21 inches, full HD, 16/9 format, LED backlight, multi-touch system, 10-point Remote control Additional USB hardware key for the Maestro CNC program.

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10 kg, arm reach: 1,249 mm, controller manufacturer: FANUC, controller model: R-30𝑖B Plus (Mini Plus Cabinet), teach pendant manufacturer: FANUC, teach pendant model: Tablet Teach Pendant, type of input current: AC, repeat accuracy: 0.04 mm, warranty duration: 24 months, Equipment: documentation/manual, Automated Cobot Metrology Cell with Creaform HandySCAN BLACK|Elite & PolyWorks Teximp Cobot Metrology Cell is a flexible, accurate and compact solution for quick, reliable and repeatable 3D scanning of your products. The CMC-10 is based on Fanuc CRX-10𝑖A collaborative robot. We are offering a complete, high-performance collaborative robotic measuring cell designed for automated 3D metrology and dimensional quality control. The system is fully equipped and ready for integration into your production line. The system consists of: 1) Creaform HandySCAN BLACK|Elite Scanning System • Scanning Device: HandySCAN BLACK|Elite handheld/robotic 3D scanner • Software: Creaform.OS software suite included • Calibration: Dedicated calibration plate • Positioning Targets: 2,000 reflective positioning markers included • Power Supply: Standard power supply unit • Connectivity: Custom 4-meter USB cable for extended reach • Storage & Transport: Heavy-duty hard transport case for the scanner 2) Technical Specifications (Creaform HandySCAN BLACK|Elite) • Certification: Acceptance testing based on VDI/VDE 2634 Part 3 standards • Volumetric Accuracy: 0.020 mm + 0.040 mm/m • Accuracy: Up to 0.025 mm • Measurement Rate: 1,300,000 measurements/s • Light Source: 22 blue laser crosses (+1 extra line for deep pockets) • Stand-off Distance: 200 mm – 450 mm 3) PolyWorks | Inspector Standard Software Package • License Type: Node-Locked license (tied to a single workstation) • Platform: Universal 3D metrology software platform for dimensional control • Meshing: Real-time quality meshing for high-quality polygonal models • Compatibility: Includes all plug-ins for manually operated point cloud digitizing and probing devices • Support: 1 year of PolyWorks comprehensive technical support and software maintenance (IMSupport) included 4) System Infrastructure & Hardware • Automation Interface: R-Series I/O Module for seamless robot-to-scanner communication • Workstation: High-performance metrology PC • Display: 27’’ Professional monitor • Accessories: Ergonomic monitor stand and keyboard 5) Training & Services Included Hjds Agkn Sopfx Airew • Professional Training: Comprehensive operator training covering both robot operation and specialized metrology equipment usage. System Features & Key Benefits: • Automated 3D scanning of parts or assemblies • Scan-to-CAD comparison and measurement report generation • Repeatable scanning paths and reduced operator dependency • Ideal for quality control, reverse engineering, and prototype validation • Mobile and transportable cell (mounted on a heavy-duty wheeled platform) • Fully programmable and customizable scanning paths • Dual-mode versatility: The scanner can operate both on the robot arm and as a standalone handheld device • Capable of scanning large components and assemblies, with automated paths limited only by the robot's 1249 mm reach • Intuitive Teximp HMI: Cell control and custom scanning path programming are simplified via a user-friendly Teximp HMI interface running directly on the FANUC Tablet Teach Pendant.

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Hjdpezcmcvefx Airsw Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Hjdpozwg H Aofx Airsw Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine Hsdpfx Aiorr Ehmersw - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Hjdozm I Dhepfx Airsw Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade Hedpfx Aijz Atvujrow sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: C116353, Equipment: CE marking, Reconditioned Production Ready！ Hedpey U Tczsfx Airsw Ref Code:1014 Emmegi Classic Magic Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Hsdpfx Aiozt Twysrjw Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, CNC sorting and optimizing line with length sorting, Paul Maschinenfabrik, model C 14 KE, built in Germany in 2019 and overhauled as new in October 2026. The line has an infeed conveyor of approx. 5 m and a C14 KE CNC cross-cut head with a 700 mm TCT saw blade, driven by an 11 kW variable-speed motor. Discharge is on two 300 mm wide conveyor belts: one 8.5 m long with 3 ejectors and one 11.5 m long with 6 ejectors. The Maxi Premium control system features a real-time Linux PC, touchscreen and remote diagnostics over the Internet. 6 months warranty. ///Technical data: //Feed system 1 infeed conveyor belt, approx. 5 m long //CNC model C14 KE – cross-cut head Welded steel machine frame, 30 mm support wall thickness, 30° tilt angle TCT saw blade, standard diameter 700 mm Motor: 11 kW, variable speed Time adjustment for the energy-saving module Energy saving by connecting the intermediate circuits 6 lower feed rollers, spiral-grooved, large diameter, hard chrome, driven by a durable timing belt 6 upper rollers with easily replaceable polyurethane segments, independent pressure via pneumatic cylinders, with mechanical height-adjustment roller Hedsz S Tkvspfx Airjw //Discharge 1 conveyor belt 8.5 m / 300 mm wide, with 3 ejectors 1 conveyor belt 11.5 m / 300 mm wide, with 6 ejectors With guided belt, driven by a 1.1 kW gear motor //Control system – Maxi Premium Operator terminal with touchscreen, keyboard and dust-protected optical mouse Remote diagnostics and installation of updates over the Internet (network) PC with real-time Linux operating system Current software and parameters on USB stick

Condition: excellent (used), Year of construction: 2024, operating hours: 1,200 h, functionality: fully functional, Offered: Sinker EDM machine genius750NOVA + connection Chameleon Linear - 120 electrode positions - 6 pallet positions 400x400 Sinker EDM machine genius 750 NOVA Right-hand configuration Control panel on the right, automation possible from the left side! * Travel ranges X * Y * Z: 420mm * 420mm * 400mm * Work table: 600mm * 600mm * Work table T-slots: number / width / spacing: 6 slots / 10mm / 83/100/100/100/83 * Controlled C-axis with n = 45 1/min * High retraction speed due to acceleration of 10 m/s² in Z and 20 m/min travel speed Generator * genius IPMtec, with comprehensive technology package for graphite, copper, and tungsten copper for machining all materials commonly used in tool and mold making * max. working current 52A, optional 100A or 196A (with 96A booster) Control system * Internal control computer with 1.2 GHz RISC CPU, 64-bit * Industrial PC with user interface, based on Win 10 * 22“ touchscreen, keyboard, mouse and handheld unit for setup with joystick, handwheel and touch display * Connections: LAN, USB, RS-232 Connection values * Electrical: 6 kVA, 400V, 50Hz * Pneumatic: 6 bar, 10 l/min * Required cooling capacity: 4.5 kW for cooling of dielectric fluid and control cabinet Chameleon base unit consisting of: * Robot * ZK’s own robot controller * 1 guide rail * 1 base magazine without magazine levels with rack and pinion drive Chameleon expansion magazine including base plate and glass sliding door set (magazine positions not included) Hjdszzawpspfx Airow

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Hedsxayl Depfx Airjw Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking