Used Engine Reconditioning for sale (19,716)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8018, type of input current: three-phase, total width: 1,100 mm, total length: 1,460 mm, total height: 2,050 mm, input current: 8 A, AC 400 industrial cylinder boring and surfacing machine It is a high-precision engine block cylinder boring and surfacing machine, developed primarily for the reconditioning and oversize boring of internal combustion engine cylinders. The machine belongs to Berco's classic industrial series of engine rebuilding equipment, featuring a massive cast-iron frame and a high-rigidity spindle system. The equipment is suitable for the precise boring of engine blocks, cylinder liners, and industrial cylinders. The stable T-slotted table and long stroke length allow for the machining of large engine blocks. The machine features a mechanical, multi-speed spindle drive and a precision feed system, ensuring uniform bore quality. Key technical specifications: • Minimum boring diameter: approx. 31 mm • Maximum boring diameter: approx. 180 mm Bljdpez Rwkqofx Aktsp • Spindle speed range: approx. 155 – 873 rpm (multi-stage) • Feed rates: approx. 0.04 – 0.076 – 0.128 mm/rev • Main motor power: approx. 1 HP • Table longitudinal travel: approx. 1000 mm • Table cross travel: approx. 100 mm • Effective table size: approx. 1100 × 400 mm • Head vertical travel: approx. 700 mm • Maximum boring depth: approx. 480 mm • Maximum working height on the table: approx. 820 mm • Distance from spindle centerline to column: approx. 305 mm • Machine weight: approx. 1500 kg • Stable cast-iron machine frame and precision guideways This is a good working machine. If you would like, you can try it at our workshop.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 755/B, type of input current: three-phase, total width: 1,020 mm, total length: 1,450 mm, total height: 2,050 mm, input current: 5 A, AC 710 industrial cylinder boring and surfacing machine This is a high-precision engine block cylinder boring and surfacing machine, developed primarily for the reconditioning and oversize boring of internal combustion engine cylinders. The machine belongs to Berco's classic industrial series of engine rebuilding equipment, featuring a massive cast-iron frame and a high-rigidity spindle system. The equipment is suitable for the precise boring of engine blocks, cylinder liners, and industrial cylinders. The stable T-slotted table and long stroke length allow for the machining of large engine blocks. The machine features a mechanical, multi-speed spindle drive and a precision feed system, ensuring uniform bore quality. Key technical specifications: • Minimum boring diameter: approx. 31 mm Bledpfjz Rw N Hsx Aktsp • Maximum boring diameter: approx. 180 mm • Spindle speed range: approx. 155 – 873 rpm (multi-stage) • Feed rates: approx. 0.04 – 0.076 – 0.128 mm/rev • Main motor power: approx. 1 HP • Table longitudinal travel: approx. 1000 mm • Table cross travel: approx. 100 mm • Effective table size: approx. 1100 × 400 mm • Head vertical travel: approx. 700 mm • Maximum boring depth: approx. 480 mm • Maximum working height on the table: approx. 820 mm • Distance from spindle centerline to column: approx. 305 mm • Machine weight: approx. 1500 kg • Stable cast-iron machine frame and precision guideways The machine has been thoroughly cleaned, checked and adjusted;ready to work.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0450510, type of input current: three-phase, total width: 1,280 mm, total length: 2,800 mm, total height: 2,290 mm, input current: 18 A, Manufacturer: ZANROSSO Officine Meccaniche S.p.A. (Italy) Type: ESA 12 hydraulic surface grinding machine The Zanrosso ESA 12 is a high-precision industrial surface grinding machine developed for the surface grinding of large-area components. The equipment features a robust cast-iron structure, hydraulic table movement, and a high-performance grinding spindle. The machine is suitable for the surface grinding of tool steel, machine parts, castings, and precision industrial components. The long hydraulic table travel allows for the machining of large workpieces, while the automatic feed ensures uniform surface quality. The large-diameter grinding wheel and stable column design enable high-precision and vibration-free machining. The machine is equipped with an industrial-grade hydraulic system and multiple electric drives. Bedpjz Rxfcjfx Aktslp Key technical specifications: • Worktable size: approx. 1500 × 320 mm • Automatic table stroke: approx. 1800 mm • Maximum grinding length: approx. 1600 mm • Table hydraulic feed rate: approx. 0 – 6000 mm/min • Maximum distance between table and grinding spindle: approx. 940 mm • Grinding head maximum vertical travel: approx. 400 mm • Grinding wheel diameter: approx. 350 mm • Distance from grinding spindle centerline to column: approx. 380 mm • Automatic feed: approx. 0.005 – 0.04 mm/stroke • Grinding head vertical rapid travel: approx. 700 mm/min Electric drives: • Grinding spindle motor: approx. 10 HP – 1400 rpm • Grinding spindle secondary speed: approx. 160 / 320 rpm • Vertical rapid travel motor: approx. 0.75 HP • Hydraulic motor: approx. 1 HP • Coolant pump motor: approx. 0.13 HP Dimensions and weight: • Length: approx. 5160 mm • Width: approx. 1280 mm • Height: approx. 2290 mm • Weight: approx. 2000 kg

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, total width: 1,050 mm, total length: 3,800 mm, total height: 1,750 mm, input current: 5 A, Schou L-2500 Heavy duty universal line boring machine Manufacturer: Schou & Co. Ltd., Copenhagen, Denmark Design: Precision bore machining equipment for line boring engine blocks and gear casings Maximum boring length: 2500 mm Bodpfxsz Rw T Es Aktelp Boring diameter range: 25 mm – 200 mm (depending on accessories) Table length: 2500 mm Spindle speed: Infinitely variable or multi-stage adjustable hydraulic/mechanical drive Feed: Automatic, fine-adjustable longitudinal feed for micron-level surface finish Frame structure: Vibration-free, special cast-iron bed with integrated support bridges Machine weight: approx. 1800 – 2200 kg (depending on equipment) 2. Accessories and equipment • Complete boring bar set (in various diameters and lengths) • Precision clamping blocks and support units for block alignment • Centering bridges and dial indicator measuring devices • Tool setting micrometer • Integrated control panel with emergency stop • Boring grinder / milling auxiliary unit (depending on model)

Condition: not inspected (used), We are selling a batch of engines and gearmotors, a total of 36 units. Please see the list and images. The total weight of the batch is approximately 2 tons. Bjdpfo Agvbbex Aktelp The engines have not been tested and some are returns. However, approximately 70% were procured in excess of our needs and have no operating hours, but have been in storage for a longer period. We welcome you to come and inspect the items. The sale is only for the entire batch.

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: light blue, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 3 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime Bljdpfox R Szuex Aktsp 2 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets.

Condition: used, mileage: 6,52,500 km, power: 331 kW (450.03 HP), first registration: 03/2008, fuel type: diesel, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2008, LICENSE PLATE: GA466BK TITLE: IVECO STRALIS 260-450, SKIP LOADER, FRONT LEAF SPRING SUSPENSION AND REAR AIR SUSPENSION, 1+3, 8X2 WITH REAR-MOUNTED CRANE, REPAINTED REF: 23C14 YEAR: 03/2008 HORSEPOWER: 450 ENGINE DISPLACEMENT: 10308 EURO STANDARD: 5 KM: 652500 TRANSMISSION: automatic DIFFERENTIAL LOCK: yes RETARDER/INTARDER: yes AXLES: 4, 8x2 WHEELBASE: 4500 TOWING CAPACITY: yes ORIGIN: Italy CABIN: short and low NUMBER OF SEATS: 2 PAYLOAD: 16,250 kg - TRACTOR UNIT: 32,000 kg at full load - TRACTOR UNIT + TRAILER: 44,000 kg at full load Blsdpsv Hidgjfx Aktjp BODY TYPE: skip loader SKIP LOADER MODEL: CARGHI KT 30/56 TELESCOPIC: yes SWIVEL: yes ROLLER: vertical ADR: no BODY DIMENSIONS: FROM: 4.00 m + 0.20 m TO: 6.10 m + 0.20 m OVERALL LENGTH: 9.355 m OVERALL LENGTH WITH CONTAINER: 9.735 m ACCESSORIES: - air conditioning - JONSORED 1440Z80 crane - serial number 14657 - length 8.00 m - maximum lifting capacity 1760 kg at the tip - year 2007 - hook with rotator - cabin, wheels, and hubs repainted RECONDITIONED: no INSPECTION: 03/11/2024 TIRES: 50% PRICE: 59,500.00 € + VAT. The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SKIP LOADERS operates in the sale and purchase of commercial and industrial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and skip loader equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without skip loader cranes. S.E.&O Due to the large amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,22,000 h, functionality: fully functional, power: 250 kW (339.91 HP), number of cylinders: 8, Used combined heat and power (CHP) unit, manufactured in 2010, for sale, complete with container. MAN gas engine overhauled in 2024 (proof of overhaul available in the form of an invoice). Bledpfxszkwc Ie Aktjp

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Blodez Iyq Tjpfx Aktop

Condition: used, pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. Bljdszd Ukiepfx Aktsp The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and meets the regulatory requirements of environmental authorities. All necessary climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-isolated granite for low-vibration mounting of an ultra-microbalance Ionization device against static charging Flow protection for shielding the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with power outlets, grounding bolt Advantages: Meets regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation: pureGMC18 Temperature: 22°C ± 1 K Humidity: 45% RH ± 3% Dimensions W/D/H: 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply: 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2007, fuel type: diesel, Genie GS 4390 RT Scissor Lift / Articulating Boom Lift / Mobile Elevated Work Platform, 15-meter working height, 4x4, Deutz engine. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices, in AS-IS condition, without guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Bedpo Aayuijfx Aktjlp Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, operating hours: 6,900 h, power: 114.74 kW (156.00 HP), fuel type: diesel, number of cylinders: 4, rotational speed (min.): 2,000 rpm, type of cooling: water, Deutz TCD 2013 L04 2V. 4-cylinder turbo engine. 156 hp. Blsdpfx Akjz Rq Rdetsp Removed from an aircraft tug in running condition, with 6900 operating hours. Video, photos and information also available via WhatsApp! Price net + 21% VAT or net for export with VAT number. We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: good (used), Year of construction: 2007, fuel type: diesel, Genie GS 4390 RT Scissor Lift / Articulating Boom Lift / Mobile Elevated Work Platform, 15-meter working height, 4x4, Deutz engine. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices, in AS-IS condition, without guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Bjdpfxe Adr I Ne Aktelp 5391 LR Nuland

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 1,00,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options. Bljdpfxjzhnlzj Aktjp

Condition: not inspected (used), Year of construction: 1971, functionality: unexamined, power: 992.92 kW (1,349.99 HP), fuel type: diesel, number of cylinders: 16, type of cooling: water, MWM 16-cylinder engine removed from a decommissioned inland vessel. The engine was operational at the time of removal. It has been stored for approximately 11 years. Functionality has not been tested. Loading is possible. Bjdow Aphcopfx Aktolp Sale only to commercial buyers and under exclusion of any warranty.

Condition: good (used), Year of construction: 2007, fuel type: diesel, Genie GS 4390 RT Scissor Lift / Articulating Boom Lift / Mobile Elevated Work Platform, 15-meter working height, 4x4, Deutz engine. A video can be sent via WhatsApp. Bodpfx Ae Aackgektjlp We have a continuous stock; please see our website. Prices are ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices, in AS-IS condition, without guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2020, operating hours: 100 h, functionality: fully functional, Key technical specifications • Family / Series: SINAMICS S120 (Booksize C-Type) • Input voltage: 600 V DC • Output voltage / current: Three-phase 400 V AC, 45 A • Cooling: Internal air cooling Bjdpfx Aj Agc A Usktjlp • Safety: Supports extended Safety Integrated functions • Included accessories: DRIVE-CLiQ cable included • Application: Precise and dynamic control of synchronous or asynchronous motors for machine tools, robotics, or packaging systems.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Used AT ENGINEERING model AT 1100 stainless steel paddle mixer with all accessories. Blsdpfxozlxy Rj Aktsp - Manufacturer: AT ENGINEERING - Model: AT 1100 - Material: Stainless steel AISI 304 - Capacity: 330 - 770 litre working capacity, 1100 litre total capacity (product dependent) - Mixing Chamber: approximately 1740 mm long x 950 mm diameter - Discharge Type: Pneumatically operated bomb door type discharge valve - Type of blades: Stainless steel shaft with paddle blades - Motor: 37 kW, 1485 rpm, 50 Hz electrical motor with gearbox, final rpm 130 rpm Includes: - Stainless steel containers for filling or discharging material. - Screw conveyor for moving the mixed material from container into the filler. - Powder filling machine - Stainless steel switchboard with integrated control panel - Stainless steel platform

Condition: reconditioned (used), functionality: fully functional, The ANSELMI Monofap EA 260×1000 parallel lathe shown, used and RECONDITIONED, is a traditional, medium-sized lathe: center height 260 mm – distance between centers 1000 mm – swing over carriage 320 mm – swing in gap 670 mm – spindle bore C.L. 6 – spindle diameter 270 mm – spindle power 10 HP – spindle speed 20-1400 rpm – bar capacity 55 mm – type B turret – bed width 370 mm – tailstock – tailstock taper c.m. 4; Bsdpfx Ao Adrn Njktslp The machine has been reconditioned in the axes, in the general mechanics, and in the electrical system, and has been brought up to current standards. Shown with 3 axes, fully equipped with steady rest, sets of chucks, sets of tool holders, tools, etc.; condition and equipment as per the photos.

Condition: used, mileage: 2,76,000 km, power: 368 kW (500.34 HP), first registration: 06/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, * NET PRICE * Engine overhauled (bearing shells) * Service renewed * Flat-roof cab with 1 bunk * Permanent all-wheel drive * Leaf / air suspension * Hydraulic connection * Hill start assist * ZF Intarder * Cooler box * Navigation system * Sun visor * German vehicle WhatsApp: Errors and prior sale excepted!! Sale is made excluding all warranties!! - We speak Russian Blede Ahuyqjpfx Aktop - We speak English - We speak Polish - We speak Arabic - We speak Spanish

Condition: ready for operation (used), functionality: fully functional, power: 220.65 kW (300.00 HP), first registration: 05/2003, axle configuration: 4x2, color: red, Year of construction: 2003, Aerial Rescue Vehicle Rescue Platform / Work Platform Vema Lift Oy ​ Type: 323TFL-E Maximum Working Height: 32 meters Horizontal Outreach: approx. 21 meters Rotation Angle: 360° continuous ​ Maximum Basket Load: 400 kg Water Line to Basket Water Monitor in Basket Power Connection in Basket ​ Stabilizers: hydraulically operated, fully automatic Control: platform and ground controls (electrohydraulic) Special Features: Compliance certificate according to Machinery Directive 98/37/EEC, including EMC directive. Chassis Manufacturer: Scania Model: P94GB 4x2 NB Drivetrain: 4x2​ Transmission: Manual First Registration: 20/05/2003 Engine Power: 300 hp Additional Equipment Firefighting body with equipment compartment Hose reel and bracket Work lighting Surrounding area illumination Storage boxes for equipment Special Signal System Blue lights Sirene system (Martinshorn or equivalent) Bljdpown Hwrjfx Aktep Condition & Service The vehicle has been stored exclusively in the fire department’s station and has undergone regular maintenance. Service and safety inspection were performed in April 2025. Complete vehicle and technical documentation is available. Additional Information The vehicle features additional firefighting-specific equipment and special functions. A detailed list of all equipment, technical specifications, and further documentation is available upon request. All information provided to the best of our knowledge and belief; no guarantee of completeness or accuracy. This advertisement does not constitute a binding offer, but is for informational purposes only. Subject to prior sale!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Bledpfx Ajzhn Rqsktep Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Bodpfjzht Smjx Aktslp Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, mileage: 5,38,734 km, power: 265 kW (360.30 HP), first registration: 07/2007, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 4,900 mm, fuel: diesel, gearing type: automatic, emission class: euro4, suspension: steel, total length: 9,270 mm, total width: 2,500 mm, Equipment: ABS, AdBlue, = Additional options and accessories = - 6x4 - Aluminum fuel tank Bljdpfxe Ahn Rcs Aktop = Further information = Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Unladen weight: 9,206 kg Payload: 16,794 kg GVWR: 26,000 kg Damage: none

Condition: refurbished (used), Year of construction: 2016, operating hours: 17,000 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,930 cm³, type of cooling: water, MAN D2842 longblock, relevant to LE201, LE203, LE211, LE213 versions Completely overhauled. Oil relief valve - new Oil pump - new Oil cooler - new Heads assembly - new Bsdpfx Asz Ef Rmjktjlp Camshaft - new Pistons - new Piston rings - new Liners - new Painted Compression and oil pressure tested. Video evidences available under separate request