Used Steering Parts for sale (24,773)

Year of construction: 2004, condition: defective spare-parts repository (used), Manufacturer: Wittmann Model: TP-PLUS-2:90 Incomplete Hnsdpfx Aoyk Tnnechsr

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Hsdpfx Acjt Ity Djhenr Voltage: 380 V

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. Hnedev Sa I Tjpfx Acher It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide Hnedpfx Acjw D Ev Eehsr More pictures and videos available upon request

Condition: new, CAR SPARE PARTS STOCK LOT. We have various stock lots consisting solely of new car spare parts from 2000 to today. New and original spare parts from the most important European brands. Mechanical, electrical and electronic parts – from suspension components to engine spares. Hnsdpfxeyziids Acher

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 06/2010, loading space length: 7,090 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, suspension: air, wheelbase: 5,000 mm, color: white, Year of construction: 2010, MS Parts V14L, 2 axle trailer, Alu side boards, Alu bottom, Alcoa weels, tyers 70%, SAF axles, Lenght inside 7.09m, 2.48m wide inside possible to wide more till 2.56 m inside, Austrian registration good condition. = More information = Axle configuration Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 9000 kg; Steered; Tire profile left: 70%; Tire profile right: 70% Rear axle: Max. axle load: 9000 kg; Tire profile left: 70%; Tire profile right: 70% Weights Empty weight: 3,920 kg Payload: 14,080 kg GVW: 18,000 kg Hnodpfowwtlbex Acher Condition Technical condition: very good Visual condition: very good Damage: none

Condition: used, A range of second-hand spare parts, as well as complete units, control systems and switchboards for Weinig Unitec (and other brands), are always in stock. Please contact us. Sample images. Hnedpfszuzu Aox Achor

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts Hnedpfxovfdvbe Achor *

Condition: new, HEIDENHAIN monitor BE 212 . 242 370 02 Hnedpoylct Asfx Acher

Condition: used, HEIDENHAIN Monitor BC 120 Hnodpfeylcz Tox Acher . 313 037-01

Condition: used, DMG Mori Panel 85-240VAC 0,3A 2386389 ( 110498 ) ID-No.: 2386389 Hodoymqu Rjpfx Achonr Suppl.: 110498

Condition: used, 3 axis counter digital display ND 780 The digital display is in good condition Hedpeylcvwefx Achsnr Type: DN 780 ID No.: 520 010-01 S.No. 57 587 193 G V6

Condition: used, HEIDENHAIN Display BE 212 . 242 370 02 Hnodeylczyspfx Achsr

Condition: used, Type: ADB/F 380.60M Hnjdpfszcgd Tjx Achor

Condition: used, A wide range of second-hand spare parts, as well as complete units, control systems and switchboards for Weinig Univar (and other brands) are always in stock. Please contact us. Hnedpfxeztv D Ns Acher Sample images.

Condition: used, Platform transport wagon, heavy-duty trailer Industrial trailer with 2-axle swivel steering Manufacturer: PLAN, Type 11 Chassis No.: 31361-1, Year of manufacture 03/2015 Payload: 20,000 kg Unladen weight: approx. 3,760 kg Permissible total weight: 23,760 kg Platform height: 850 mm Platform length: 5,000 mm Platform width: 2,500 mm Overall length: 6,100 mm (without drawbar) Overall width: 2,500 mm Tires: Ø 559 x 300 mm (solid rubber tire 559/305-406.4) - 4 wheels with 2-axle swivel steering - Tracking - Interchangeable drawbar, drawbar can be bolted on at the front or rear - Drawbar with a tow eye size of 40 mm diameter - Small turning radius - Very stable outer frame made of I-beams, height 280 mm, width 95 mm Hnedpfxjztrv Ue Acher - Very stable steel floor made of 10 mm checkered plate Length for transport: 610 cm (with drawbar folded up) Width for transport: 250 cm Height for transport: 85 cm Weight per trailer: approx. 3,760 kg Good condition 2 units available Price quoted per trailer

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Hjdpfx Ajztwkdochjnr Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, NEXUS: Trusted by Professionals Hnedpfx Acezphlwehjr Proven Performance in Contour Edge Banding A proven contour edge banding machine designed for easy operation by users of all experience levels. Continuously improved through real customer feedback, NEXUS incorporates innovative features that significantly increase the speed and efficiency of your production process. Key innovations include a 3D laser scanning system that accurately copies the panel contour and measures the required edge band length with millimetric precision, a chassis-integrated edge band roll feeding table, and convenient automatic or manual operating modes selected through the touchscreen control panel.

Condition: used, axle configuration: 2 axles, first registration: 10/2021, loading space length: 13,600 mm, loading space width: 2,440 mm, loading space height: 2,670 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 2021, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift Hnedpsyz Nt Nsfx Achor = Notes = Number of axles: 2, Dual tires, Tare weight: 7480 kg, Gross vehicle weight: 35000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2021, Axle type: SAF, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift material: Aluminum, Tail lift size: 200x254, MAKE IS KEL-BERG / TRIDEC STEERING / TAILLIFT = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 275/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Dual tires; Lift axle; Tire tread depth left inside: 9 mm; Tire tread depth left outside: 9 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 8 mm Axle 2: Dual tires; Steered; Tire tread depth left inside: 9 mm; Tire tread depth left outside: 12 mm; Tire tread depth right inside: 12 mm; Tire tread depth right outside: 13 mm Weights Tare weight: 7,480 kg Payload: 27,520 kg GVWR: 35,000 kg Functional Tail lift: Rear door, 1500 kg Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €297 per month (default, 60 months); Inquire for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning medium via a spray process. The machine operates as a top-loading unit with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance departments and industry. The Iso version features thermal insulation to reduce energy loss. The pumps are leaking and need to be overhauled or replaced. Technical data: - Basket diameter: 1,100 mm - Usable height: 500 mm - Load capacity: max. 350 kg - Tank capacity: 250 l - Power: 15.4 kW Hsdpfx Acjzry Dwshsnr - Operating temperature: max. 75 °C

Condition: used, 4 Elmo Rietschle 539283 air filters for vacuum pumps or similar. Unused / as new Hodpozrxrtsfx Achsnr

Condition: used, ROD 426 500 02S12-76 ID No. 318 591-01 Serial No. 8 194 998 A with cable and plug Hedpfx Acozrxqvjhenr As new

Condition: used, Year of construction: 1996, operating hours: 14,240 h, 1996 | Sennebogen 625 M for parts only | Used Mobile Crane | 14240 hours Hjdpfxezrlyqe Achsnr 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: As a source for spare parts: Many components have already been removed. The engine and hydraulic pump are present, and the axles are complete. However, some hydraulic parts as well as the joysticks and displays are missing. The engine is also reported to have defects. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40537 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2012, Manufacturer: Wittmann Type: 702 Hnedpfx Acsvyhtmehor Year of manufacture: 2012

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C Hnodpfxsuk Dwfj Achor The machine is incomplete and not operational! For spare parts only!!